Abstract
The red palm weevil (RPW) is a highly destructive pest that mainly affects palms, particularly date palms (Phoenix dactylifera), in the Arabian Gulf region. In this study, we present a near-chromosomal-level genome assembly of the RPW using a combination of PacBio HiFi and Dovetail Omini-C reads. The final genome assembly is around 779 Mb in size, with an N50 of ~43 Mb, consistent with our previous flow cytometry estimates. The completeness of the genome was confirmed through BUSCO analysis, which indicates the presence of 99.5% of BUSCO single copy orthologous genes. The genome annotation identified a total of 29,666 protein-coding, 1,091 tRNA and 543 rRNA genes. Overall, the proposed genome assembly is significantly superior to existing assemblies in terms of contiguity, integrity, and genome completeness.
Similar content being viewed by others
Background & Summary
The RPW (Rhynchophorus ferrugineus (Olivier)) is an extremely destructive pest that poses a significant threat to palm trees (Arecaceae) in various agroecosystems1,2. Belonging to the family Curculionidae, this Coleopteran pest beetle is native to Southeast Asia3. Over the past three decades, RPW has spread extensively, reaching the Arabian Gulf, Mediterranean regions, and other parts of the world1,3,4. In the Arabian Gulf, the RPW inflicts severe damage on Phoenix dactylifera L. (date palm), which is a crucial and important economic crop. Each year, a large number of date palms are affected by RPW, resulting in multimillion-dollar losses in yield4. Currently, traditional agricultural practices are employed to manage RPW infections, including the surveillance of plants for RPW infestation, capturing weevils, treating infected plants with pesticides, and finally removing/isolating infected plants from healthy plants5.
Due to recent advances in sequencing technology, genomics-based insect management has been suggested6,7,8,9. Initially, transcriptome studies were carried out in RPW to identify specific genes mainly expressed during its development and infection of palm trees10. However, the lack of a complete genome assembly has made genome-based management difficult. To tackle this problem, we published a first draft genome (rfM v1) of RPW with the aim of identifying important gene families relevant to the destructive life history trait of this species11. In this initial assembly (rfM v1), we used 10X, Illumina and Nanopore sequencing technologies; however, the lack of proper genetic map forced us to use the Tribolium castaneum genome for synteny-based pseudochromosome generation. Given the lack of a genetic map as well as genome-wide chromatin interaction information (such as Hi-C), our previous assembly had mis-ordered and mis-oriented scaffolds, which resulted in an apparent higher gene duplication level. In 2021, Guilherme et al.12 published a second draft haplotype-resolved RPW genome assembly. Recently, a third draft genome assembly was also deposited in public repository13 (https://doi.org/10.5281/zenodo.6878576). The second and third genomes assembly reported a genome size of ~550 Mb and ~1.16 GB respectively and the contiguity and completeness of these genomes remain problematic and the assembly is still at the contig/scaffold level.
To improve genome contiguity and completeness of the RPW reference genome, a chromosomal-level reference assembly is required. Such a chromosome assembly will provide an important and complete resource to study RPW diversity, genomic variation, molecular evolution, and environmental adaptation, which could eventually lead to molecular genetic-based pest control7,8,14. In this study, we report a near-chromosomal-level genome assembly of RPW15, achieved using both PacBio HiFi and Illumina based Omini-C data16. The full genome assembly and annotation workflow is shown in Fig. 1.
Methods
Sample collection, DNA isolation and genome sequencing
An adult RPW male (marked as W39M) was collected from a date palm farm (Al Foah farm) located at Al Ain, UAE. Prior to DNA isolation, the sample underwent thorough surface cleaning and was subsequently flash-frozen with liquid nitrogen. High molecular weight genomic DNA isolation was carried out on Maxwell® RSC 48 (Promega Corporation, Wisconsin, USA) using Maxwell® RSC Tissue DNA kit (Promega Corporation, Wisconsin, USA). In total, ~15.5 micrograms (~310 ng/microL) of DNA were extracted from the W39M sample and used for the preparation of the whole genome sequencing (WGS) library.
A PacBio WGS Hifi library (CCS method, ~10–20 kb insert size) was constructed using the SMRT bell TM Template kit (version 1.0) according to manufacturer’s protocol. During library preparation, BluePippin System (Sage Science, MA, USA) was used for library size selection and library quality was confirmed on a Qubit® 2.0 Fluorometer (Thermo Fisher Scientific™, Waltham, MA, USA). Finally, library insert size was assured by Bioanalyzer (Agilent 2100, Agilent Technologies) and sequenced on the PacBio Sequel II platform. The sub reads generated from the PacBio Sequel II platform were converted into HiFi reads using CCS v.4.20 tool (https://github.com/PacificBiosciences/ccs/releases/tag/v4.2.0).
The Dovetail proximity ligation Omni-C library was prepared using Dovetail® Omni-C® Kit (USA) according to manufacturer’s instructions. During library preparation, chromatin structure of the RPW sample was fixed using formaldehyde and DNA extraction carried out. DNA was digested with DNAse I restriction enzyme followed by proximity ligation. Finally, a Illumina PE sequencing compatible library was generated from fragmented DNA using NEBNext Ultra kit. The library was then sequenced on the Illumina HiSeqX system at the Dovetail facility (USA). For genome error correction and gene annotation, we have used currently generated (HiFi and Omini-C16), previously generated (Ilumina WGS and transcriptome11) and publicly available (Pacbio Isoseq, transcriptome and proteome) data12,17,18.
Genome size estimation, genome assembly and scaffolding
The bam file (HiFi data) generated from PacBio Seqel II was initially converted into fastq file using Bam2Fastq v.1.1 program (https://github.com/jts/bam2fastq). In total, ~2.1 million HiFi long reads were generated for this study. The average length of the reads was around 17.2 Kb, with an N50 value of 17,221 bp. The total size of the generated reads amounted to ~ 37 Gb, providing a sequencing coverage of ~51X (coverage was calculated based on the flow cytometry value from our previous study11). Prior to the genome assembly, we estimated genome size of RPW using HiFi long reads and Illumina data (male data; data from our previous study11) by kmerfreq v.119 and gce v.1.0.2 (https://github.com/fanagislab/GCE) software. Based on the size estimation analysis, the estimated genome size of RPW was determined to be ~ 603 Mb. To obtain a more accurate estimation of the theoretical genome size, we employed several genome size estimation tools, including Jellyfish v.2.320, GenomeScope v.121, GenomeScope v. 222, and R program-based approaches including findGSE23. Interestingly, the results from these approaches varied within a range from ~499 Mb to ~767.229 Mb (Fig. 2a). The observed discrepancies in the estimated genome size could potentially be attributed to the heterozygosity and complex organization of the RPW genome12,14 (Supplementary Fig. 1a and 1b).
Genome assembly assessment and comparison. (a) The histogram generated by findGSE with a k-mer size of 21 is displayed below. The observed k-mer frequency is depicted by the gray line, while the teal line represents the fitted model for the heterozygous k-mer peak. The blue line represents the fitted model without k-mer correction, and finally, the red line represents the fitted model with k-mer correction, which is utilized to estimate the size of the genome. (b) A left panel with a Hi-C contact map is used to represent the genome assembly, showing the proximity of genomic regions in three-dimensional space as a contiguous linear arrangement. Each cell in the contact map represents sequencing data that confirms the linkage between two specific regions. Gray lines are used to separate scaffolds, and the density of the map indicates the degree of fragmentation, with higher density indicating more fragmentation. The right panel, depict a plot showing the size distribution in Mega base (Mb) of each scaffold in the genome. (c) This plot compares the rfMv2 genome in this study to a published genome (GCA_014462685) of RPW by plotting the cumulative sequence length (y-axis) against the increasing number of scaffolds (x-axis). (d) The comparison between the rfMv2 genome presented in this study and the published genome (GCA_014462685) was visualized using grouped bar charts. These charts depict the BUSCO analyses for the insecta_odb10 gene sets. The height of the bars represents the percentage of genes found in each assembly relative to the total gene set. Additionally, x axis of each of the grouped bar charts are labeled with the Initials based on the BUSCO status: M for missing genes, F for fragmented genes, CD indicates complete and duplicated genes, and CS represents complete and single-copy genes.
The genome assembly was carried out using Hifiasm v.0.16.1 software24 with default parameters. The genome assembly resulted in 750 contigs with an assembly size of 784 Mb (N50: 20.2 Mb and G + C%: 33.6) (Table 1). The assembled contigs were error corrected by Pilon v.1.2325 using Illumina data. Furthermore, contigs were scaffolded and pseudochromosomes were generated using Omni-C data. In total, ~115 million Omni-C reads (~44X) were generated for this study. For scaffolding, we used four different scaffolding programs (Supplementary Table 1); among them HiRiSE v.X26 generated better scaffolds with a size of ~784 Mb (N50: ~43.4 Mb, G + C%: 33.6 and longest scaffold length: ~97.8 Mb) (Table 1). HiRise generated 37 scaffolds with the size > 1 Mb; among them, 11 scaffolds which sizes are more than 29 MB, which are considered as pseudochromosomes. Generated scaffolds were error corrected using Illumina, HiFi and Omni-C data, which resulted in a final genome size of 779 Mb (N50: ~43 Mb, G + C%: 33.6 and longest scaffold length: ~97.2 Mb) with 11 chromosome level scaffolds (rfM v2) (Table 1) (Fig. 2b, Supplementary Fig. 2). The final assembled genome size is ~2 -~36% higher than the estimated genome size; the discrepancy between the estimated genome size and assembled genome size happened due to the complexity and heterozygosity nature of the RPW genome12,14. But the assembled genome size is almost same size of the previously reported genome size11. Moreover, the total genome size is ~7% higher than the flow cytometry-based estimated genome size11. We observe a huge improvement in terms of completeness and contiguity plotting the number of scaffolds that represents the maximum genome size in term of completeness and contiguity between our sequenced genome rfM2 and NCBI GCA_014462685 weevil genome (Fig. 2c). We carried out BUSCO v.4.1.4 (insecta_odb10)27 analysis on assembled contigs, scaffolds and the final genome and compared that to the GCA_014462685 genome (Fig. 2d, Table 1). In total, 99.5% BUSCO universal single-copy orthologous genes were annotated from the final assembly. Moreover, duplicated and missing BUSCO genes percentage was estimated as 0.4%, which were lesser than the previously released genome assembly (rfM v1)11 as well as GCA_014462685 genome12 (Fig. 2d).
Based on previous karyotypic studies, the chromosome number of male RPW has been estimated as 2n = 22 (10 + XY)28,29. The Y chromosome is smaller in size compared to the other chromosomes29. To identify X and Y chromosome from the final assembly, we aligned the male and female RPW Illumina short reads to the final assembly using bwa v.0.7.17 alignment tool30 and calculated the alignment coverage (vertical and horizontal) using Mosdepth v.0.3.3 tool31. The 10 autosomes (A) have almost similar coverage and depth in both male and female Illumina data. Based on the reads, horizonal coverage and high vertical depth of the female Illumina data, we determined pseudochromosome rfM5 (ASCQM010000005; size ~29 Mb) and scaffold rfM12 (JASCQM010000012; size: ~5.2 Mb) are part of X chromosome. Similarly, based on the higher read coverage and high vertical depth of the male Illumina data, scaffolds rfM14 (JASCQM010000014), rfM17(JASCQM010000017), rfM29 (JASCQM010000029), rfM37 (JASCQM010000037), rfM102 (JASCQM010000102), rfM184 (JASCQM010000184), rfM283 (JASCQM010000283), rfM334 (JASCQM010000334) which amounting the total size of ~10 Mb, are identified as a part of Y chromosome (Fig. 3, Supplementary Fig. 3).
Distribution of depth of coverage and genome features. Circos plot depicting genome features across the 11 RPW chromosomes, highlighting with dotted squares the X and Y chromosomes. (a) RPW chromosomes (rsfM1-rsfM11-X, Y) depth of coverage in male and female (b) GC content percentage. (c) Gene density across the genome. (d) Distribution of repeat elements: DNA transposons (blue bar), (e) retrotransposon TEs (red bar). For tracks (b–e), a window size of 25Kb was used, whereas for tracks (a), the size was increased to 1 Mb.
Repeat finding, gene prediction and functional annotation
The repeat regions found in the genome were identified and masked through RepeatModeler v. 2.0.432 and RepeatMasker v. 4.1.533 tools. The de novo repeat library from the genome was constructed using RepeatModeler (-database weevil_rdb -threads 80 -LTRStruct). From the repeat library, possible protein/transcripts related sequence were removed, and RPW v2 genome was masked using RepeatMasker (-e ncbi -pa 80 -norna -lib -a -xsmall -gff). In total, ~31% (~240 Mb) of genome was identified as repeats. Similar to Hymenoptera, Coleoptera RPW DNA transposons are more prevalent in the genome compared to long terminal repeats (LTRs)34 (Fig. 3). Interestingly, we observe a GC bias for one scaffold, X chromosome (rfM12) (Fig. 3), similar to palindromes hotspots in the human X chromosome, which is consistent with GC-biased gene conversion during recombination, as opposed to recombination suppression35.
We carried out gene prediction on masked genome using Braker v.3 pipeline36. For gene annotation, we applied both ab initio and homology-based gene prediction approaches. In total, 226,907 insect protein sequences from 11 insect species, 20 Illumina based transcriptome and 6 PacBio based transcriptome data sets (Supplementary Table 2) were used for homology-based gene prediction. Illumina transcriptome reads were mapped against the RPW v2 genome using HiSAT2 v. 2.1 tool37 (-p 40 --dta–phred33 -q -S --summary-file), further using Samtools v.1.1038 (view -@ 40 -uhS & sort -@ 40), sorted BAM files were generated. From the BAM files transcripts were generated using StringTie v.2.1.3 program39. Similarly, Pacbio reads were mapped against the genome using Minimap2 v.2.1740 (-ax splice -t 40 -uf -C5), Samtools and SringTie and generated the sorted BAM files and transcripts files respectively. Both transcripts and protein were used for braker based gene prediction. Augustus v. 3.3.341 and GeneMark-ETP v. 4.6142 were used for the ab initio gene prediction. In total, 29,666 protein coding genes were predicted from the assembled genome. Further, 1,091 tRNA and 543 rRNA genes were predicted using tRNAscan-SE v.2.0.643 and Rnammer v.1.244. The proteins predicted were similarity searched against NCBI-NR45, UniProt18, Swiss-Prot46, InterPro47 and KEGG48 databases using Blast v.2.1349, Diamond v.2.1.650, InterPro-Scan v.5.6151 and KAAS52 tools. In total, 29,747 (~91.1%), 29,755 (~91.1%), 14823 (~45.3%), 18,302 (~56.0%) and 9,930 (~30. 4%) proteins were annotated using NR, UniProt, Swiss-Prot, InterPro and KEGG databases respectively. Among total proteins, 9,168 proteins were annotated in all databases. Finally, based on Uniprot and Interpro hits, specific Gene Ontology (GO) terms were identified for each protein (Fig. 4a).
Functional annotation and orthology analysis. (a) Total protein annotation against KEGG, SwissProt, Uniprot, NCBI-NR and InterPro databases are show in bar graph. Venn diagram shows the shared and unique annotation with various databases. (b) Venn diagram shows the common and unique ortholog gene clusters in Anoplophora glabripennis (AG), Drosophila melanogaster (DM), Dendroctonus ponderosae (DP) and Tribolium castaneum (TP). Bar graph shows the total identified ortholog gene clusters in five insect species.
For ortholog analysis, we retrieved proteomes of 3 Coleoptera species, Anoplophora glabripennis (GCF_000390285), Dendroctonus ponderosae (GCF_020466585), Tribolium castaneum (GCF_000002335) and 1 Diptera species Drosophila melanogaster (GCF_000001215) from NCBI-Genome database and compared with the annotated RPW protein sequences using Orthovenn2 tool53. In total, 15318 orthologous gene clusters were identified, among them 6,486 orthologous clusters were shared between all five insects. Overall, Coleoptera insects share most of the orthologous gene clusters (Fig. 4b). The synteny between the current genome assembly and the existing genome assembly was confirmed using D-GENIES54 online server by dot plot method (Supplementary Fig. 4).
Data Records
The PacBio HiFi reads, and Omini-C reads generated during this study has been submitted in NCBI-SRA database under the BioProject id PRJNA95022116. The assembled whole genome of RPW (v2) is deposited in NCBI-Genome database (accession number: JASCQM00000000015). The predicted protein, CDS, GTF and functional annotations were deposited in Zenodo repository55 (https://doi.org/10.5281/zenodo.8310271).
Technical Validation
The isolated DNA quality and quantity were confirmed using Nanodrop (Thermo Fisher Scientific™, Waltham, MA, USA), Qubit (Thermo Fisher Scientific™, Waltham, MA, USA) and agarose gel electrophoresis method.
The quality of the RPW genome assembly was confirmed by aligning the Illumina shot-gun, PacBio HiFi and Dovetail Omini-C reads against the assembled genome followed by vertical and horizontal coverage conformation. Initially, the RPW male and female Illumina data generated from our previous study was aligned against the assembled genome using BWA program. Approximately, 99% of both male (coverage ~98% with the average depth of ~65X; Pseudochromosome coverage) and female reads aligned (coverage ~98% with the average depth of ~72X; Pseudochromosome coverage) against the RPW genome, from that ~95.2% and 94.8% of PE reads properly aligned against the genome.
We carried out BUSCO analysis (protein mode) on the predicted protein sequences and confirmed the gene prediction completeness. BUSCO analysis resulted 98.9% (1352) complete, 0.3% (4) fragmented and 0.8% (11) missing BUSCOs from the final gene prediction. Further, we aligned transcriptome reads from our previous study11 against the assembled genome using HiSAT tool, which resulted ~95% - ~98% of read alignment.
Code availability
RepeatModeler: -database weevil_rdb -threads 100 -LTRStruct
RepeatMasker: -e ncbi -pa 80 -norna -lib -a -xsmall -gff
Hisat2: -p 40 --dta --phred33 -q -S --summary-file
Samtools: view -@ 40 -uhS & sort -@ 40
minimap2: -ax splice -t 40 -uf -C5
rnammer: -S euk -m tsu,ssu,lsu -multi -gff
tRNAscan-SE -E -o weevil_trna -f weevil_secondary -m weevil_stat -H
Diamond: blastp -p 40 --query --db --evalue 1e-6 --max-hsps 1 -k 1 --outfmt 6
Interproscan: -appl pfam -dp -f TSV -goterms -iprlookup -pa -t p -cpu 90
References
El-Shafie, H. A. F. & Faleiro, J. R. Red palm weevil Rhynchophorus ferrugineus (Coleoptera: Curculionidae): Global invasion, current management options, challenges and future prospects. Invasive Species-Introduction Pathways, Economic Impact, and Possible Management Options, 1-30 (2020).
Commission, E. (Office for Official Publications of the European Communities Luxembourg, 2011).
Fiaboe, K., Peterson, A. T., Kairo, M. & Roda, A. Predicting the potential worldwide distribution of the red palm weevil Rhynchophorus ferrugineus (Olivier)(Coleoptera: Curculionidae) using ecological niche modeling. Florida Entomologist, 659-673 (2012).
Abdel-Banat, B. & El-Shafie, H. Management of the Red Palm Weevil in Date Palm Plantations in Al-Ahsa Oasis of Saudi Arabia. Plant Health Cases, phcs20230001 (2023).
Al-Dosary, N. M., Al-Dobai, S. & Faleiro, J. R. Review on the management of red palm weevil Rhynchophorus ferrugineus Olivier in date palm Phoenix dactylifera L. Emirates Journal of Food and Agriculture, 34-44 (2016).
Alphey, N. & Bonsall, M. B. Genetics‐based methods for agricultural insect pest management. Agricultural and forest entomology 20, 131–140 (2018).
Sethuraman, A., Janzen, F. J., Weisrock, D. W. & Obrycki, J. J. Insights from population genomics to enhance and sustain biological control of insect pests. Insects 11, 462 (2020).
de Souza Pacheco, I. et al. Efficient CRISPR/Cas9-mediated genome modification of the glassy-winged sharpshooter Homalodisca vitripennis (Germar). Scientific reports 12, 6428 (2022).
Li, M. et al. Suppressing mosquito populations with precision guided sterile males. Nature Communications 12, 5374 (2021).
Yin, A. et al. Transcriptomic study of the red palm weevil Rhynchophorus ferrugineus embryogenesis. Insect science 22, 65–82 (2015).
Hazzouri, K. M. et al. The genome of pest Rhynchophorus ferrugineus reveals gene families important at the plant-beetle interface. Communications biology 3, 323 (2020).
Dias, G. B. et al. Haplotype-resolved genome assembly enables gene discovery in the red palm weevil Rhynchophorus ferrugineus. Scientific reports 11, 9987 (2021).
Manee, M. M. Draft genome assembly of adult female red palm weevil Rhynchophorus ferrugineus. Zenodo https://doi.org/10.5281/zenodo.6878576 (2022).
Manee, M. M., Alqahtani, F. H., Al-Shomrani, B. M., El-Shafie, H. A. & Dias, G. B. Omics in the Red Palm Weevil Rhynchophorus ferrugineus (Olivier)(Coleoptera: Curculionidae): A Bridge to the Pest. Insects 14, 255 (2023).
GenBank. https://identifiers.org/ncbi/insdc.gca:GCA_030347505.1 (2023).
SRA. https://identifiers.org/ncbi/insdc.sra:SRP430085 (2023).
Leinonen, R., Sugawara, H. & Shumway, M. & Collaboration, I. N. S. D. The sequence read archive. Nucleic acids research 39, D19–D21 (2010).
Consortium, U. UniProt: a worldwide hub of protein knowledge. Nucleic acids research 47, D506–D515 (2019).
Wang, H. et al. Estimation of genome size using k-mer frequencies from corrected long reads. arXiv preprint arXiv 2003, 11817 (2020).
Marcais, G. & Kingsford, C. Jellyfish: A fast k-mer counter. Tutorialis e Manuais 1, 1–8 (2012).
Vurture, G. W. et al. GenomeScope: fast reference-free genome profiling from short reads. Bioinformatics 33, 2202–2204 (2017).
Ranallo-Benavidez, T. R., Jaron, K. S. & Schatz, M. C. GenomeScope 2.0 and Smudgeplot for reference-free profiling of polyploid genomes. Nature communications 11, 1432 (2020).
Sun, H., Ding, J., Piednoël, M. & Schneeberger, K. findGSE: estimating genome size variation within human and Arabidopsis using k-mer frequencies. Bioinformatics 34, 550–557 (2018).
Cheng, H., Concepcion, G. T., Feng, X., Zhang, H. & Li, H. Haplotype-resolved de novo assembly using phased assembly graphs with hifiasm. Nature methods 18, 170–175 (2021).
Walker, B. J. et al. Pilon: an integrated tool for comprehensive microbial variant detection and genome assembly improvement. PloS one 9, e112963 (2014).
Putnam, N. H. et al. Chromosome-scale shotgun assembly using an in vitro method for long-range linkage. Genome research 26, 342–350 (2016).
Seppey, M., Manni, M. & Zdobnov, E. M. BUSCO: assessing genome assembly and annotation completeness. Gene prediction: methods and protocols, 227-245 (2019).
Bartlett, A. C. & Rananavare, H. Karyotype and sperm of the red palm weevil (Coleoptera: Curculionidae). Annals of the Entomological Society of America 76, 1011–1013 (1983).
Lannino, A., Sineo, L., Bianco, S., Arizza, V. & Manachini, B. Chromosome studies in North-Western Sicily males of Rhynchophorus ferrugineus. Bulletin of Insectology 69, 239–247 (2016).
Li, H. & Durbin, R. Fast and accurate short read alignment with Burrows–Wheeler transform. bioinformatics 25, 1754–1760 (2009).
Pedersen, B. S. & Quinlan, A. R. Mosdepth: quick coverage calculation for genomes and exomes. Bioinformatics 34, 867–868 (2018).
Flynn, J. M. et al. RepeatModeler2 for automated genomic discovery of transposable element families. Proceedings of the National Academy of Sciences 117, 9451–9457 (2020).
Chen, N. Using Repeat Masker to identify repetitive elements in genomic sequences. Current protocols in bioinformatics 5, 4.10. 11–14.10. 14 (2004).
Petersen, M. et al. Diversity and evolution of the transposable element repertoire in arthropods with particular reference to insects. BMC Ecology and Evolution 19, 1–15 (2019).
Jackson, E. K., Bellott, D. W., Skaletsky, H. & Page, D. C. GC-biased gene conversion in X-chromosome palindromes conserved in human, chimpanzee, and rhesus macaque. G3 11, jkab224 (2021).
Hoff, K. J., Lomsadze, A., Borodovsky, M. & Stanke, M. Whole-genome annotation with BRAKER. Gene prediction: methods and protocols, 65-95 (2019).
Kim, D., Paggi, J. M., Park, C., Bennett, C. & Salzberg, S. L. Graph-based genome alignment and genotyping with HISAT2 and HISAT-genotype. Nature biotechnology 37, 907–915 (2019).
Li, H. et al. The sequence alignment/map format and SAMtools. bioinformatics 25, 2078–2079 (2009).
Pertea, M. et al. StringTie enables improved reconstruction of a transcriptome from RNA-seq reads. Nature biotechnology 33, 290–295 (2015).
Li, H. Minimap2: pairwise alignment for nucleotide sequences. Bioinformatics 34, 3094–3100 (2018).
Stanke, M. et al. AUGUSTUS: ab initio prediction of alternative transcripts. Nucleic acids research 34, W435–W439 (2006).
Bruna, T., Lomsadze, A. & Borodovsky, M. GeneMark-ETP: Automatic Gene Finding in Eukaryotic Genomes in Consistency with Extrinsic Data. bioRxiv, 2023.2001. 2013.524024 (2023).
Chan, P. P. & Lowe, T. M. tRNAscan-SE: searching for tRNA genes in genomic sequences. Gene prediction: methods and protocols, 1–14 (2019).
Lagesen, K. et al. RNAmmer: consistent and rapid annotation of ribosomal RNA genes. Nucleic acids research 35, 3100–3108 (2007).
Pruitt, K. D., Tatusova, T. & Maglott, D. R. NCBI Reference Sequence (RefSeq): a curated non-redundant sequence database of genomes, transcripts and proteins. Nucleic acids research 33, D501–D504 (2005).
Boeckmann, B. et al. The SWISS-PROT protein knowledgebase and its supplement TrEMBL in 2003. Nucleic acids research 31, 365–370 (2003).
Hunter, S. et al. InterPro: the integrative protein signature database. Nucleic acids research 37, D211–D215 (2009).
Kanehisa, M. in ‘In silico’simulation of biological processes: Novartis Foundation Symposium 247. 91-103 (Wiley Online Library).
Altschul, S. F., Gish, W., Miller, W., Myers, E. W. & Lipman, D. J. Basic local alignment search tool. Journal of molecular biology 215, 403–410 (1990).
Buchfink, B., Xie, C. & Huson, D. H. Fast and sensitive protein alignment using DIAMOND. Nature methods 12, 59–60 (2015).
Zdobnov, E. M. & Apweiler, R. InterProScan–an integration platform for the signature-recognition methods in InterPro. Bioinformatics 17, 847–848 (2001).
Moriya, Y., Itoh, M., Okuda, S., Yoshizawa, A. C. & Kanehisa, M. KAAS: an automatic genome annotation and pathway reconstruction server. Nucleic acids research 35, W182–W185 (2007).
Xu, L. et al. OrthoVenn2: a web server for whole-genome comparison and annotation of orthologous clusters across multiple species. Nucleic acids research 47, W52–W58 (2019).
Cabanettes, F. & Klopp, C. D-GENIES: dot plot large genomes in an interactive, efficient and simple way. PeerJ 6, e4958 (2018).
Sudalaimuthuasari, N. Near-Chromosomal-Level Genome of the Red Palm Weevil (Rhynchophorus ferrugineus), a Potential Resource for Genome-Based Pest Control. Zenodo https://doi.org/10.5281/zenodo.8310271 (2023).
Acknowledgements
This work was supported by Khalifa Center for Genetic Engineering and Biotechnology (KCGEB), UAE University (internal research fund: 21R007).
Author information
Authors and Affiliations
Contributions
N.S. carried out data analysis, wrote and reviewed the manuscript. B.K. collected the samples and carried out wet lab experiments. K.M.H. carried out data analysis, wrote and reviewed the manuscript. K.M.A.A. supervised the project, designed the experiment, and reviewed the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sudalaimuthuasari, N., Kundu, B., Hazzouri, K.M. et al. Near-chromosomal-level genome of the red palm weevil (Rhynchophorus ferrugineus), a potential resource for genome-based pest control. Sci Data 11, 45 (2024). https://doi.org/10.1038/s41597-024-02910-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41597-024-02910-3
- Springer Nature Limited