Abstract
The flagella of mammalian sperm display non-planar, asymmetric beating, in contrast to the planar, symmetric beating of flagella from sea urchin sperm and unicellular organisms. The molecular basis of this difference is unclear. Here, we perform in situ cryo-electron tomography of mouse and human sperm, providing the highest-resolution structural information to date. Our subtomogram averages reveal mammalian sperm-specific protein complexes within the microtubules, the radial spokes and nexin–dynein regulatory complexes. The locations and structures of these complexes suggest potential roles in enhancing the mechanical strength of mammalian sperm axonemes and regulating dynein-based axonemal bending. Intriguingly, we find that each of the nine outer microtubule doublets is decorated with a distinct combination of sperm-specific complexes. We propose that this asymmetric distribution of proteins differentially regulates the sliding of each microtubule doublet and may underlie the asymmetric beating of mammalian sperm.
Similar content being viewed by others
Main
Eukaryotic flagella and motile cilia are whip-like organelles, the rhythmic beating of which propels unicellular eukaryotes through fluids, clears dust particles in respiratory tracts and enables the swimming of sperm cells of various species1,2,3. Most flagella from protozoa to mammals share a conserved core structure, the axoneme, composed of nine doublet microtubules (doublets) arranged in a circle around a central pair complex of two singlet microtubules (the 9 + 2 configuration, Fig. 1a)4,5. Dyneins, microtubule-based molecular motors anchored on the nine doublets, drive the relative sliding of neighboring doublets6,7. However, if all dyneins were active at once, forces around the circle of the nine outer doublets would be canceled and the axoneme would not bend5,8. To produce rhythmic beating motions, non-motor protein complexes are required to regulate dynein activities across the axoneme structure5,9,10,11,12,13,14,15. The largest and most critical of these regulatory complexes are the radial spokes (RSs) that bridge the outer doublets to the central pair complex and the nexin–dynein regulatory complexes (N-DRCs) that cross-link neighboring doublets and regulate dynein activities across the axoneme structure.
a, Schematic of a cross-section view of the conserved (9 + 2) configuration of axonemes in motile cilia. One doublet is highlighted, and its associated motor and non-motor protein complexes are labeled. The dyneins, N-DRCs, MIPs and RSs are colored in pink, green, orange and cyan, respectively. b–d, Three views of the consensus subvolume average of nine doublets in mouse sperm axonemes. Different protein complexes are highlighted as described in a. c, The clefts in the top of RS1 and RS2 and the ‘S’-shaped head of RS3 are indicated by the red arrowheads and dashed line, respectively. e, Schematic of the doublet microtubule with individual protofilaments labeled. Two cross-sections of the A tubule and one longitudinal view of the isolated MIP densities are shown. The MIPs are colored in orange. The protofilaments connecting to the MIPs and the periodicities for the connections are indicated. f,g, Comparison of densities of N-DRCs and RSs from mouse sperm flagella (this study) and human respiratory cilia (EMD-5950)31. f, Additional densities in the mouse sperm N-DRCs are highlighted (light red). g, The unique densities of a barrel and an RS2–RS3 cross-linker in the mouse sperm axoneme are highlighted in blue and red, respectively.
Flagella from different cells display a wide variety of beating patterns, from the planar and symmetric waveforms observed in flagella of unicellular organisms and sea urchin sperm, to the various non-planar and asymmetric waveforms displayed by different mammalian sperm8. The structural and regulatory mechanisms underlying these different waveforms are poorly understood. Much of our current structural understanding of axonemes is derived from studies of Chlamydomonas and sea urchin sperm flagella using advanced cryo-electron tomography (cryo-ET) and image processing16,17,18. Apart from minor variations of the dyneins on a subset of the nine doublets, most of the other motor and non-motor protein complexes were found to be the same across the nine outer doublets. A unique bridge-like structure that cross-links two neighboring doublets is proposed to constrain the plane of bending16,17,18,19. The pseudo-ninefold symmetry and the bridge structure are thought to be important for generating equivalent beating amplitudes in the opposite directions, leading to planar and symmetric waveforms.
Comparable structural information for mammalian sperm, which display varied non-planar asymmetric waveforms20,21,22, has lagged behind. A technical challenge in using modern cryo-electron microscopy to investigate mammalian sperm flagella is their thickness (>500 nm), which is close to the upper limit for the widely used 300-kV transmission electron microscopes (TEMs). Recently, cryogenic focused ion beam–scanning electron microscopy (cryo-FIB–SEM) and cryo-ET have been applied to study in situ macromolecular structures in sperm axonemes from mammals23. However, the limited data obtained in the previous study precluded processing strategies to analyze individual microtubule structures within the axonemes and also their spatial relationships in situ.
Here, we combined cryo-FIB–SEM and in situ cryo-ET with data-processing strategies to study the contextual assembly of different microtubule-based structures within mouse and human sperm flagella. Our data provide the highest-resolution information to date for mammalian sperm axonemes. Furthermore, our data reveal non-motor protein complexes in mammalian sperm that are not found in axonemes of other mammalian cilia and non-mammalian sperm. We show that each of the nine outer doublets is unique with regard to the composition of regulatory complexes including RSs and N-DRCs. The distribution of regulators varies between mouse and human sperm. We propose that the asymmetric distribution of these regulatory complexes across the axoneme could contribute to the asymmetric and non-planar beating waveforms of various mammalian sperm.
Results
Sperm-specific features revealed by subvolume averaging
Freshly extracted mouse sperm were vitrified on electron microscopy (EM) grids and loaded into a cryo-FIB–SEM device to generate lamellae of ~300 nm in thickness (Extended Data Fig. 1a,b). The lamellae were then imaged using a Krios 300-kV TEM, and dose-symmetric tomographic tilt series (±48°) around the axoneme were then acquired (Extended Data Fig. 1c). Our images showed detailed molecular features including the double-bilayer membranes of the surrounding mitochondria and individual microtubule protofilaments (Extended Data Fig. 1e,f). Three-dimensional (3D) tomograms were reconstructed from the tilt series, which revealed repetitive axonemal dyneins and RSs along the outer doublets as well as periodic protrusions from the singlet microtubules of the central pair complex (Extended Data Fig. 1h,i). The periodicities of the RSs and central pair protrusions are ~96 nm and ~32 nm, respectively (Extended Data Fig. 1i), consistent with those described in Chlamydomonas and sea urchin sperm24,25.
To overcome the low signal-to-noise ratio of raw cryo-ET data, subvolume averaging of 96-nm-repeating units was used to reconstruct consensus density maps (Extended Data Fig. 2a). Our consensus maps of periodic units from all nine doublets revealed robust signals for individual microtubule protofilaments and other associated protein complexes that repeat every 96 nm (24 Å at Fourier Shell Correlation (FSC) = 0.143; n = 9,055 subvolumes; N = 69 tomograms) (Fig. 1b–d and Supplementary Figs. 1 and 2).
Inside the A tubule of the outer doublet, we observed a filamentous density of microtubule inner proteins (MIPs) that is very similar to but more extensive than that recently assigned as Tektin filaments in bovine trachea cilia26 (Fig. 1b and Extended Data Fig. 3). The densities of MIPs have a periodicity of 48 nm, consistent with that of previously studied Chlamydomonas flagella and bovine trachea cilia26,27. We thus calculated a subvolume average of the 48-nm-repeating doublets, focusing on the microtubule only (18 Å at FSC = 0.143; n = 18,153 subvolumes; N = 69 tomograms) (Extended Data Fig. 3). The filamentous components have connections to 12 protofilaments of the A tubule in mouse sperm axonemes (except A4), in contrast to the more limited connections of the Tektin filaments to the A9–A13 and A1 protofilaments observed in bovine tracheal cilia (Fig. 1e and comparisons in Extended Data Fig. 3b). We observed three different modes of interaction between the MIPs and the lumen of microtubules: (1) interaction with tubulins within a single protofilament, (2) connections to the inter-protofilament space across two neighboring protofilaments and (3) connections spanning multiple protofilaments (Fig. 1e and Extended Data Fig. 3a,b). Notably, the A9–A10 junction is where the microtubule seam of the A tubule is located28, and we observed several sperm-specific densities spanning protofilaments A9 and A10 that are absent in the map of bovine respiratory cilia (Extended Data Fig. 3b). In addition, we observed striated densities along the helical pitch of the microtubule inside the B tubule (Extended Data Fig. 3b,c). These striations are separated by 8 nm and cover the intradimeric interface between the α and β tubulins. Together, our averages revealed sperm-specific MIPs that form an extensive interaction network inside the doublets.
Our consensus map of the mouse sperm axoneme reveals outer and inner arm dyneins similar to those observed in sea urchin sperm (Fig. 1b–d and Extended Data Fig. 4a,b). However, we observed several unique non-motor protein complexes in the mouse sperm axoneme that do not have equivalent counterparts in the reported structures from Chlamydomonas, Tetrahymena and human respiratory cilia (Fig. 1f,g)17,24,29,30,31. While the N-DRC in human respiratory cilia has a ‘V’ shape31, our consensus map reveals extra densities that extend to the microtubule surface, creating a square-shaped structure (Fig. 1f). The RSs are comprised of three tower-like densities, with two adopting similar morphology (RS1 and RS2) and a third, distinct RS3 (Fig. 1b,c,g). When viewed from the ‘head’ of the towers, RS1 and RS2 both exhibit a cleft and a C2 symmetry axis that extends through the ‘tower’, while RS3 has a distinctive S-shaped surface with two holes (Fig. 1c), similar to the ones observed in human respiratory cilia31. By contrast, the heads of RS1 and RS2 from Chlamydomonas and Tetrahymena do not have the deep cleft13,14,15,29,30, the RS3 stump from Chlamydomonas is much shorter, and RS3 from Tetrahymena has a smaller surface area of the head15,29 (Extended Data Fig. 4c). Multiple additional densities, not found in respiratory cilia or unicellular organisms, were observed between the three spokes in the mouse sperm axoneme (Fig. 1g). First, we observed an ~20-nm-sized barrel-shaped density between RS1 and RS2, consistent with extra densities in sperm axonemes reported recently23,32. Our higher-resolution map revealed that the barrel is composed of ten rod-shaped strands arranged in a right-handed twist configuration (Supplementary Video 1). Furthermore, densities were found to cross-link RS2 and RS3, hereafter named the ‘RS2–RS3 cross-linker’ (Fig. 1g). Of note, all these extra densities in the MIPs, N-DRCs and RSs are apparent even when our maps were low-pass filtered to 50 Å, a resolution lower than that of the published map of the human respiratory cilia axoneme that does not possess these features (Extended Data Fig. 4d–f). Therefore, the additional densities found in mouse sperm are not due to higher resolution in this work but most likely reflect the presence of additional sperm-specific proteins.
The outer doublets are arranged in fixed radial positions
We next calculated a subvolume average for the 32-nm-repeating units of the central pair complex (26 Å at FSC = 0.143; n = 3,062 subvolumes; N = 69 tomograms) (Fig. 2a–c, Extended Data Fig. 2b and Supplementary Figs. 1 and 2). Individual protofilaments of the two singlet microtubules were clearly resolved (Fig. 2b). Various proteins protrude from both microtubules, giving rise to an asymmetric cross-section contour of the central pair complex (Fig. 2b). We observed two distinct sets of MIPs inside the two singlet microtubules, both of which repeat every 32 nm (Extended Data Fig. 5a). On the external surface of microtubules, we observed both 32-nm-repeating and 16-nm-repeating protrusions. Notably, compared to the central pair complex of sea urchin sperm, where MIPs were not observed, the overall shapes of the external protrusions are very similar (Extended Data Fig. 5b), while both are different compared to the central pair complex of Chlamydomonas flagella (Extended Data Fig. 5c)25,33,34,35. These comparisons suggest that the central pair complex is likely conserved from invertebrate to vertebrate sperm (animal sperm) but different from the ones from unicellular protists.
a–c, Three views of the central pair complex of the mouse sperm axoneme. a,c, Periodic protrusions are indicated by red arrowheads and highlighted by light red lines, and their periodicities are labeled. d, An average of the entire axoneme was calculated by expanding the original subvolumes for the central pair complex threefold and averaging without further alignment. At high contour, densities of nine doublet microtubules are resolved at nine distinct radial positions. e, The same average as in d is shown at low contour. Note that the A tubules from doublet microtubules are distinguishable due to the presence of extensive MIP densities. Smeared densities corresponding to where dyneins, RSs and N-DRCs are located could be observed at lower occupancies than those for the doublet microtubules.
To understand how the outer doublets are arranged relative to the asymmetric central pair complex, we expanded our aligned subvolumes of the central pair complex three times to include the region where the outer doublet microtubules reside and then calculated an average without further alignment (Fig. 2d,e). Although the alignment was only performed for the central pair complex in the expanded subvolumes, nine distinct doublet microtubule densities that are parallel to the singlet microtubules could be resolved, indicating a remarkably consistent radial arrangement of doublets in the axonemes. The A and B tubules of doublet microtubule were clearly distinguishable based on the stronger MIP signals in the former. By contrast, discrete external complexes such as dyneins, RSs and N-DRCs were poorly resolved. The lack of alignment along the longitudinal direction could be caused by mismatch of the 32-nm periodicity of the central pair complex and the 96-nm periodicity of the doublet microtubules (Fig. 2d,e).
To better understand the spatial relationship between the central pair complex and the outer doublets, we performed multibody refinement by treating the central pair protrusions and the doublet structure as two rigid bodies, refining them separately and remapping them back to each raw subvolume36. Their relative positions were then subjected to principal-component analysis (Methods and Extended Data Fig. 2c). For all nine interfaces, we always observed that the first principal component, which explains most variations (40–50%), was parallel to the longitudinal axis of axonemes (Supplementary Video 2), suggesting that the doublets and the central pair complex from different tomograms meet at different longitudinal offsets.
The multibody refinement also yielded a map with the two rigid bodies placed at their average positions, allowing us to examine how the nine doublets interact with different protrusions of the central pair complex (Fig. 3a). Interestingly, we observed that most RS heads were separated by a short distance from the central pair protrusions, without any resolved densities between them (Extended Data Fig. 5d). However, at the central pair interface with doublet 8, we observed protrusions from the central pair complex fit into the ‘cleft’ of RS1 and RS2 and also the two holes of the ‘S curve’ of the head of RS3 (Fig. 3b–d). Such complementary shapes may limit the sideways movement of doublet 8 and stabilize its radial position.
a, The arrangement of the central pair complex and nine doublet microtubules (dmt1-9) is based on averaging relative positions deduced by multibody refinement. The different protrusions of the central pair complex are colored in accordance with data from Carbajal-Gonzalez et al.25. The interface between the RSs from doublet 8 and the central pair complex is indicated (red rectangle). b–d, Three different views of the interface between the RSs from doublet 8 and the protrusions from the central pair complexes (P1, P2 and P3).
Asymmetric distribution of sperm-specific regulators
We then sought to investigate whether the outer doublets themselves differ from each other. We grouped doublet subvolumes based on their radial positions relative to the central pair complex (numbered 1–9 as in refs. 37,38). The subvolumes were aligned, and the averages were calculated for each of the nine doublets (n = 810–954 subvolumes; N = 58–64 tomograms). This processing strategy identified unique densities emerging from the inner arm dyneins of doublet 5 and connecting to the B tubule of doublet 6 (Extended Data Fig. 6). These connecting densities are similar to the ‘5–6 bridge’ observed in the sea urchin at lower resolutions18, validating our assignment of doublets and processing strategies. Interestingly, the RSs and other 96-nm-repeating features on both doublets 5 and 6 could be resolved concurrently after local refinement, indicating that there is a relatively consistent longitudinal offset (~20 nm) between these two doublet microtubules throughout different axonemes (Extended Data Fig. 6d). The correlation of the unique bridge densities and the consistent offset that is observed only between doublets 5 and 6 suggest that the bridge could limit the relative sliding between this outer doublet pair (in comparison to another doublet pair in Extended Data Fig. 6g,h).
Next, we systematically compared motor and non-motor or regulatory protein complexes across the nine doublets. Outer arm dyneins across all nine doublets were indistinguishable from those of our consensus average (as shown in Fig. 1d). The densities of inner arm dyneins were also generally similar, with two exceptions. For doublet 5, densities corresponding to dyneins e and g (nomenclature defined in Chlamydomonas17) were shifted compared to those of the other doublets (Extended Data Fig. 7a), while, for doublet 9, densities for dynein b were not resolved (Extended Data Fig. 7b). These results indicate that the motor proteins are largely the same with only minor variations.
We next examined the RSs from each doublet. Strikingly, we observed that the sperm-specific features were asymmetrically distributed across the nine doublets (Fig. 4). The barrel density was not observed in doublet 1 or 9 and was present at a lower occupancy in doublet 3. In the remaining six doublets, the occupancy of the barrel was comparable to that of other repeating structures (for example, RS1). The RS2–RS3 cross-linkers are absent in doublets 3 and 8 but present in the remaining doublets. In addition, for doublets 2 and 3, we resolved extra densities close to the base of RS3 (RS3 scaffolds) that were not observed in our consensus averages or previously reported consensus averages, in which subvolumes from all nine doublets were averaged together23,32. This is likely because only one or two of the nine doublets possess these features (11–22%) and averaging smeared the signals. Our processing strategy allowed us to isolate these subvolumes based on cellular contextual information, and the high occupancies of these unique structures in the respective doublets suggest their consistent presence in these specific doublets.
Three orthogonal views of the consensus average of doublets in mouse sperm are shown as in Fig. 1b–d. At the bottom, densities corresponding to RSs from the nine per-doublet averages are shown around a schematic of a cross-section view of the (9 + 2) axoneme. Common features are colored in gray, while the barrel, the RS2–RS3 cross-linker and RS3 scaffolds are highlighted in cyan, red and orange, respectively.
We also examined the N-DRCs that cross-link neighboring doublets (Fig. 5). All nine N-DRCs share the common ‘V’-shape density, but the extra connections to the microtubule show heterogeneities. Interestingly, N-DRCs from doublets 2–4 share an arch-shaped density perpendicular to the microtubules, while the ones from doublets 6–8 have 45°-tilted thin strands. Doublets 1, 5 and 9 all have distinct densities, leading to five different N-DRCs. Note that all these features were observed at similar signal-to-noise levels, and because they resulted from averaging of more than 800 subvolumes sampled in ~60 different axoneme tomograms, they represent the commonly shared features within each individual doublet.
Top, two orthogonal views of the consensus average of doublets in mouse sperm. Bottom, densities corresponding to N-DRCs from the nine per-doublet averages are shown around a schematic of a cross-section view of the (9 + 2) axonemes. Common features among the N-DRCs are colored in gray, while the unique features are highlighted.
To test whether the bending states of the axonemes affect the features of RSs and N-DRCs, we curated subvolumes from tomograms with and without apparent curvatures and calculated per-doublet averages. The same set of features of RSs and N-DRCs were observed. In addition, we also collected a dataset of demembraned sperm axonemes (48 tomograms) that were not actively beating. The RSs and N-DRCs in these non-motile sperm have the same asymmetric features highlighted in Figs. 4 and 5, suggesting that the asymmetric densities were not caused by bias in macroscopic curvatures but likely reflect intrinsic compositional heterogeneities in the nine doublets.
Our in situ data also allowed us to separate axonemes of the midpiece and principal piece based on the presence of mitochondrial and fibrous sheaths, respectively. We averaged subvolumes from these two regions for each doublet and found only subtle differences in the base of RS3 of doublet 2 and also RS1 of doublet 7 (Extended Data Fig. 8a). In these per-doublet averages, we did not resolve robust densities corresponding to the connections between outer dense fibers and the respective doublets. Previous studies suggest that averages of all nine doublets in the proximal principal region from a few tomograms have such attachments23. However, our raw tomograms of the proximal principal piece showed that some outer dense fibers are close to the corresponding doublets and some are further away (Extended Data Fig. 8b). Such variations require per-doublet averages to be considered. However, the subset of tomograms in the proximal principal region is small, and per-doublet averaging resulted in anisotropic 3D reconstructions. An even larger dataset is required to resolve structures with such a specific and complex distribution pattern. We also calculated an average of subvolumes from the nine doublets near the beginning of axonemes (within 2 µm) and found no significant difference when compared to the overall consensus average, suggesting that the sperm-specific features are established very close to the basal region of the flagella (Extended Data Fig. 8c,d). Together, these data highlighted the overall consistency of the axoneme structure along the flagella.
Overall, our per-doublet averages showed that the distributions of various sperm-specific features for both the RS complexes and the N-DRCs follow distinct patterns, such that every doublet is decorated by a unique combination of non-motor proteins.
A distinct asymmetric pattern in human sperm
We next examined whether the unique outer doublet features observed in mouse sperm were also conserved in other mammalian sperm. We collected tilt series of intact human sperm without milling, focusing on the thinner principal piece of the flagella (Extended Data Fig. 9a,b and Supplementary Figs. 1 and 2). We then calculated consensus averages of doublet microtubules and the central pair complex (23 Å and 31 Å at FSC = 0.143; n = 6,613 and 2,365 subvolumes, N = 56 and 59 tomograms, respectively) (Fig. 6a,b). These consensus averages of human sperm were similar to the ones from mice, with the notable exception that the relative occupancy of the barrel between RS1 and RS2 was much lower in human sperm. Using the per-doublet processing approach described above, we then calculated averages for each of the nine doublets individually. Although the per-doublet averages from human sperm were noisier than those from mouse sperm due to greater sample thickness (>400 nm versus ~330 nm as shown in Extended Data Fig. 9c–e), they were sufficient to identify the sperm-specific features (Fig. 6c). In particular, the 5–6 bridge, RS2–RS3 cross-linkers and RS3 scaffolds show similar asymmetric distributions between human and mouse sperm. However, we observed that the barrel density only exists in four of nine doublets, in contrast to seven of nine doublets in mouse sperm axonemes (Fig. 6c). This is consistent with the lower occupancy of barrel densities in our consensus average (Fig. 6a). In particular, doublets 2–5 appear to be different in human and mouse axonemes in terms of the presence of the barrel, while the rest of the doublets are similar. We also examined the N-DRC from each doublet and found five distinct structures like those in mouse sperm (Extended Data Fig. 9f). In summary, our data indicate that the asymmetric architecture of axonemes is a general feature of mammalian sperm axonemes, although there are intriguing variations of distribution for the barrel in human and mouse sperm.
a, A consensus average map of the RS for human sperm axonemes. The barrel density appears to have lower occupancy than the RSs (indicated by the red arrowhead), which is not the case in mouse sperm shown in Fig. 1g. b, The consensus average map of the central pair complex for human sperm axonemes (gray) is overlaid with one from mouse sperm axonemes (blue). c, Densities corresponding to RSs from the per-doublet averages are shown around a schematic of the (9 + 2) axonemes. Common features among the RSs are colored in gray, while the barrel, the RS2–RS3 cross-linker and the RS3 scaffold are highlighted in cyan, red and orange, respectively.
Discussion
Our in situ tomography studies of mouse and human sperm revealed a large ensemble of macromolecular complexes in their native cellular environment. In particular, we observed various sperm-specific features in the MIPs, RSs and N-DRCs that were not observed in mammalian respiratory cilia and non-mammalian sperm. Furthermore, we reconstructed the entire axoneme using cellular contextual information and uncovered the asymmetric architecture of the mammalian sperm axoneme, where every microtubule-based structure is decorated by a unique set of non-motor proteins (Fig. 7a,b). As these non-motor proteins regulate dynein activities based on previous studies, we propose that the asymmetries of non-motor protein complexes could modulate the sliding of the nine doublets individually to shape the species-specific asymmetric waveforms observed for mammalian sperm, as discussed below.
Schematic of the (9 + 2) axonemes of mouse (a) and human (b) sperm. The doublets are numbered, and the sperm-specific regulatory complexes are labeled for each of the nine outer doublets. In particular, the components from the RSs are shown for each doublet and the N-DRCs are colored differently depending on the extra density (as in Figs. 4–6). Note that only the barrel distribution is different in mouse and human sperm axonemes. c, RSs from different doublets interact with specific stripes of protrusions of the central pair complex. Our multibody refinement is consistent with the sliding hypothesis, and potential longitudinal movements of dmt1 are indicated by the two red arrows. The model is analogous to ‘nine train moving on nine tracks’. d, Schematics showing gradual accumulations of offsets of periodic structure units between two filaments in a curved axoneme (left) and consistent offset between doublet 5–doublet 6 (right). e, The constant offset within tomograms and among tomograms (N = 63) would be consistent with limited horizontal bending in sperm flagella.
Sperm-specific structures added mechanical couplings
Mammalian sperm flagella are generally much longer and wider than flagella from unicellular organisms or respiratory cilia (lengths of >45 µm versus ~10 µm and diameters of >0.5–1 µm versus ~0.3 µm). Sperm axonemes are also surrounded by additional subcellular structures, such as outer dense fibers and mitochondrial and fibrous sheaths, which likely present additional mechanical challenges during rhythmic beatings. Previous studies also suggested that larger bending torques are associated with mammalian sperm compared to other cilia39, but it has remained unclear how sperm axonemes have evolved specific mechanisms to withstand the additional mechanical stress. Our averages of in situ cryo-ET revealed many additional non-motor proteins that cross-link the known axonemal components. We propose that these additional proteins function to strengthen the mechanical rigidity of the corresponding components to accommodate higher mechanical requirements of sperm axonemes.
The microtubules themselves must be able to withstand vigorous bending, and the seam is the weakest point40,41. Our data revealed the most extensive MIP interaction network in microtubules observed in axonemes to date. The proteins between the A9 and A10 protofilaments could stabilize the lateral interfaces within the seam. Also, the proteins that form the striations inside the B tubule could cross-link the tubulins within B2–B6 protofilaments and also couple these protofilaments laterally along the helical pitch. We also observed extensive filamentous structures within the A tubule that likely provide additional mechanical stability. Tektin-1 to tektin-4 have been known to assemble into three-helix bundles that pack along one another laterally inside the microtubule doublets of bovine tracheal cilia26 and likely compose a part of the filamentous densities observed in sperm. Mammalian sperm also contain an additional tektin (tektin-5; Supplementary Table 1)42, which is a candidate for some of the additional sperm-specific densities (as shown in Extended Data Fig. 3b), although the assignment requires confirmation with higher-resolution reconstructions.
We also observed unique sperm-specific densities on the exterior of the microtubules, specifically the barrel and RS2–RS3 cross-linker between the three RSs, the RS3 scaffolds and extra densities in the N-DRC. The RSs were previously observed to tilt relative to the microtubule43. Additional connections between the three RSs and the scaffolds at the bases would integrate them together into a more rigid unit. Another possibility is that the coupling could lead to coordinated movement of the three RSs. The N-DRCs regulate the sliding between the neighboring doublets and prevent splaying of axonemes12. Extra densities linking to the microtubules could improve the stability of N-DRCs under higher mechanical stress. Together, the additional protein complexes in mammalian sperm would help to maintain the geometric integrity of the (9 + 2) microtubule configuration of the axoneme under mechanical stress during vigorous beating motions.
The arrangement of the doublets and the central pair complex
Previous studies suggested that the central pair complex can twist radially relative to the nine outer doublets in Chlamydomonas flagella44. Our observation of densities corresponding to the nine doublet microtubules in the average of the entire (9 + 2) axoneme can exclude the possibility of such free twisting in mammalian sperm as the doublet densities would be smeared by averaging (Fig. 2d,e). Interestingly, we observed a cleft between the two halves of RS1 and RS2 and holes in RS3 in mammalian sperm axonemes (Fig. 1c), in contrast to the flatter surface of the RS heads from Chlamydomonas flagella13,14,15 (Extended Data Fig. 4c). While the flat surfaces may enable twisting in Chlamydomonas44, the complementary shapes of RSs and protrusions from the central pair complex in mammalian sperm may restrict such radial movements (as shown in Fig. 3b–d). Fixation of radial positions of the nine doublets also orients each of the RS complexes in proximity to unique stripes of densities of the central pair complex (Fig. 3a). This arrangement could allow functional specialization and divergent evolution of each doublet microtubule, such as the distinct sets of sperm-specific features in the nine doublets.
Our multibody refinement suggests the existence of heterogeneities in the longitudinal offsets between doublets and the central pair complex in the randomly sampled axonemes that were combined in the averages (Supplementary Video 2). This observation is consistent with the sliding hypothesis for axonemal bending, in which active dyneins generate displacement between the neighboring doublets6. Such movement would also lead to displacement of the doublets relative to the central pair complex along the longitudinal axis of axonemes, as though there were nine trains (doublets) moving along nine tracks (central pair protrusions) (Fig. 7c).
The 5–6 bridge is a sperm-specific feature that appears to be conserved between sea urchin18 and mammalian sperm. Previous studies pointed out that, for two parallel inelastic microtubule filaments, bending would lead to gradual accumulation of longitudinal offsets between them if they were at different radii of the bend (Fig. 7d)43. As an estimate based on the reported curvature of mouse sperm38, the offsets between neighboring doublets could differ by as much as Δ~28 nm within one 2 µm-long tomogram (details in the Methods). More importantly, the initial offset of each tomogram varies depending on how much sliding has happened upstream or downstream of the imaged area of the flagella. On the other hand, the resolved periodic features in both doublets 5 and 6 suggest that there is a consistent offset between these two doublets (Extended Data Fig. 6), not just within each tomogram but also among the 63 tomograms that contribute to the average. Due to the nature of random sampling of our imaging areas of different cells (N = 63 tomograms), this could happen if there is generally limited bending along the direction parallel to the plane of these two filaments (Fig. 7e). The bundling of these two doublets can create a filament stiffer than that of a single doublet, with distinct elastic properties or bending propensities in different directions. Such asymmetries of mechanical properties within the nine doublets could also contribute to asymmetric waveforms.
Asymmetries of regulators may lead to asymmetric beatings
Our in situ data and processing strategies based on the contextual information revealed that the axoneme itself, which appeared to have ‘pseudo-ninefold symmetry’ in classical TEM images3, is highly asymmetric at the molecular level. As the axoneme is the underlying engine that drives the flagellar beating motion, such asymmetries in structure could lead to asymmetric beating waveforms.
Furthermore, the asymmetries lie mostly in the mammalian sperm-specific non-motor protein complexes, including the RSs and N-DRCs. These complexes are well-established regulators of dynein motor activities, and defects in individual protein components can lead to irregular beating9,10,12,13. In mammalian sperm, we show here that each of the nine doublet microtubules is decorated by a unique composition of sperm-specific regulators. We speculate that the distinct molecular composition could lead to differences in the sliding speeds or bending forces for each of the doublet pairs (Fig. 7). The non-equivalent forces could lead to a deviation from the single plane of beating characteristic of more symmetric axonemes. Thus, we hypothesize that the non-uniform distribution of sperm-specific RS and N-DRC regulators are important for asymmetric and non-planar beating. Additionally, previous studies showed that human and mouse sperm have different swimming waveforms (movies in refs. 22,45). Our studies suggest that, although the RS barrels are conserved in human and mouse, their distribution varies and the variations could create diverse sperm swimming behaviors.
This study has revealed mammalian sperm-specific structures within the microtubules, RSs and N-DRCs that are absent in sea urchin and zebrafish sperm46,47,48. The still unknown proteins likely arose to serve functions required by natural fertilization in mammals. Sperm from different species are cast into a foreign environment and selected for their ability to reach and fertilize an egg. Sea urchin and zebrafish sperm swim freely in water, whereas mammalian sperm swim in a thin layer of viscous liquid on uneven surfaces of female reproductive tracts49. The viscous environment brought more mechanical challenges to the axonemes and hence the microtubule filaments inside. In addition, asymmetric and non-planar waveforms of mammalian sperm could be beneficial to navigate around 3D obstacles in reproductive tracts. Furthermore, the dimensions and physical characteristics of reproductive tracts vary among different mammals; therefore, fine-tuning the underlying molecular features to produce specialized waveforms is likely under evolutionary selection. In the future, systematic genetic and proteomic analyses of mammalian sperm-specific proteins would be valuable to connect sperm-specific axonemal structures with their functions in sperm motility and reproduction.
Methods
All chemicals were purchased from Sigma-Aldrich unless otherwise noted.
Sample preparation
Mouse sperm were collected from 10–16-week-old C57Bl/6J mice based on a published protocol50. Briefly, the sperm were stripped from vasa deferentia by applying pressure to the cauda epididymis in 1× Krebs buffer (1.2 mM KH2PO4, 120 mM NaCl, 1.2 mM MgSO4•7H2O, 14 mM dextrose, 1.2 mM CaCl2•2H2O, 5 mM KCl, 25 mM NaHCO3). The sperm were washed and resuspended in ~100 µl Krebs buffer for the following experiments.
Human sperm cells were collected by masturbation from healthy donors and visually inspected for normal morphology and motility before use. Spermatozoa were isolated by the swim-up procedure in HTF or HS solution as previously described51 and then concentrated by centrifuging for 5 min at 500g. The supernatant was reduced to 100 µl, and the cells were resuspended.
All experimental procedures using human-derived samples were approved by the Committee on Human Research at the University of California, Berkeley, under IRB protocol number 2013-06-5395.
Grid preparation
EM grids (Quantifoil R 2/2 Au 200 mesh) were glow discharged to be hydrophilic using an easiGlow system (Pelco). The grid was then loaded onto a Leica GP cryo plunger (pre-equilibrated to 95% relative humidity at 25 °C). The mouse sperm suspension was then mixed with 10-nm gold beads (Electron Microscopy Sciences, 25487) to achieve final concentrations of 2–6 × 106 million cells per ml. For the demembraned mouse sperm, Triton X-100 was added to a final concentration of 0.1% in the final suspension. The human sperm suspension was mixed with 10-nm gold beads to achieve final concentrations of 0.5–2 × 106 million cells per ml. Next, 3.5 µl of sperm mixture was added to each grid, followed by incubation for 15 s. The grids were then blotted for 4 s and plunge-frozen in liquid ethane.
Cryogenic focused ion beam milling
Cryogenic focused ion beam milling was performed either manually using an Aquilos cryo-FIB–SEM microscope (Thermo Fisher Scientific) or automatically using an Aquilos II cryo-FIB–SEM microscope (Thermo Fisher Scientific). A panoramic SEM map of the whole grid was first taken at 377× magnification using an acceleration voltage of 5 kV with a beam current of 13 pA and a dwell time of 1 µs. Targets with appropriate thickness for milling were picked on the map. A platinum layer (~10 nm) was sputter coated, and a gas injection system was used to deposit the precursor compound trimethyl(methylcyclopentadienyl)platinum(IV). The stage was tilted to 15–20°, corresponding to a milling angle of 8–13° relative to the plane of grids. FIB milling was performed using stepwise decreasing current as the lamellae became thinner (1.0 nA–30 pA; final thickness, ~300 nm). The grids were then stored in liquid nitrogen before imaging.
Image acquisition and tomogram reconstruction
Tilt series of mouse sperm were collected on a 300-kV Titan Krios TEM (Thermo Fisher Scientific) equipped with a high-brightness field emission gun (xFEG), a spherical aberration corrector, a Bioquantum energy filter (Gatan) and a K3 Summit detector (Gatan). The images were recorded at a nominal magnification of 19,500× in super-resolution counting mode using SerialEM52. After binning over 2 × 2 pixels, the calibrated pixel size was 3.53 Å on the specimen level. For each tilt series, images were acquired using a modified dose-symmetric scheme between −48° and 48° relative to the lamella with 3° steps and grouping of two images on either side (0°, 3°, 6°, −3°, −6°, 9°, 12°, −9°, −12°, 15°…). At each tilt angle, the image was recorded as movies divided into eight subframes. The total electron dose applied to a tilt series was 100 e− Å−2. The defocus target was set to be −4 to −7 µm.
Tilt series of human sperm were recorded at a nominal magnification of 33,000× in super-resolution counting mode. After binning over 2 × 2 pixels, the calibrated pixel size was 2.66 Å on the specimen level. The total electron dose applied to a tilt series was 100 e− Å−2. For each tilt series, images were acquired using a bidirectional scheme between −48° and 48° relative to the lamella starting from either 0° or 21°, with an incremental step of 3°. The defocus target was set to be ~2–5 µm. At each tilt, the image was recorded as movies divided into eight subframes.
All movie frames were corrected with a gain reference collected in the same EM session. Movement between frames was corrected using MotionCor2 without dose weighting53. Initial reconstructions of all tilt series were performed using AreTomo54, and these 3D tomograms were examined to exclude tomograms with bad target tracking, crystal ice, aberrant defocus, incomplete axonemes (less than five doublet microtubules caused by FIB–SEM milling) and unfavorable orientations (perpendicular to the tilt axis). Alignment of selected tilt series and tomographic reconstructions were then performed using Etomo55. The aligned tilt series were then CTF corrected using TOMOCTF56, and the tomograms were generated using TOMO3D57 (bin2; pixel size, 7.06 Å).
In total, we started with 24 milling grids of mouse sperm and obtained 200 lamellae. Tilt series with no crystal ice were kept and processed further. In some cases, parts of the (9 + 2) axoneme was milled away and we only processed the ones with at least five doublets and also enough space to include the full central pair complex for subvolume averaging. In the end, the final reconstructions of the consensus averages were from 69 usable tomograms. The per-doublet averages were based on subsets of the 69 tomograms (58–64 tomograms). For the human sperm cryo-ET dataset, the final reconstructions of the consensus averages are from 65 tilt series with the flagellar orientations within ~30° of the tilt axis. Note that the final tomograms used for different reconstructions vary as tomograms may be discarded due to poor alignment or may lack certain doublets.
Subvolume averaging
Subsequent subvolume extraction, classification and refinement were all performed using RELION3 (ref. 58) (schematic workflow in Extended Data Fig. 2a). Briefly, subvolumes from the doublets were manually picked every 24 nm and extracted with a box size large enough to accommodate a complete 96-nm-repeating unit (pixel size, 7.06 Å; box size, 180 pixels; dimension, 127.08 nm). Initially, subvolumes were aligned to a map of Tetrahymena doublets (EMD-9023) low-pass filtered to 80 Å, and the resulting map was used as the reference for further processing. Manual curation of the data was performed to check the alignment accuracy and data quality for each tomogram. Supervised 3D classification on RSs gave rise to four class averages of the 96-nm-repeating units at four different registries, staggered from one another by 24 nm. The pixel view in IMOD was used to determine the coordinates corresponding to the base of RS2 in all four class averages, and all subvolumes were re-extracted and recentered to the same point. All subvolumes were combined and aligned to one reference, and duplicate subvolumes were removed based on minimum distance (<40 nm). The remaining subvolumes were aligned to yield the consensus average for all nine doublets. These subvolumes were later remapped and sorted to calculate per-doublet averages (the script is also available below). The MIPs inside microtubule doublets repeat every 48 nm. Subvolumes of the 96-nm-repeating units were recentered on MIP features that repeat every 48 nm and refined with a mask focusing on the microtubules only.
To generate an average for the central pair complex, subvolumes were picked and extracted from the central pair complex every 16 nm (pixel size, 7.06 Å; box size, 160 pixels; dimension, 112.96 nm) (Extended Data Fig. 2b). Refinement of all subvolumes to an average of the sea urchin central pair (EMD-9385) resulted in a central pair with only 16-nm-repeating features. The alignment parameters were modified to reset all translations (x, y, z) to zero and then used for a second round of refinement with local search only. Focused classification was then performed on the microtubule-associated proteins on the C1 microtubule to separate the two populations of subvolumes (~50% each) corresponding to the central pair complex with 32-nm periodicity and an offset of 16 nm between them. The subvolumes were then recentered and extracted on the same protein features for the two class averages. All subvolumes were aligned to the same reference using local searches. Duplicate subvolumes were removed based on the minimum separating distance (<30 nm). The remaining subvolumes were refined to generate the consensus average for the central pair complex.
Subvolumes large enough to include all nine doublets were re-extracted, centering on the aligned subvolumes of the central pair complex (pixel size, 21.18 Å; box size, 160 pixels; dimension, 338.88 nm). These subvolumes were averaged without further alignment and used to re-extract subvolumes corresponding to individual doublets. Subvolumes corresponding to a particular doublet were aligned and remapped back to the tomograms in three dimensions. However, these subvolumes do not have the correct alignment for the 96-nm-repeating features, but their centers nevertheless trace the axis of that microtubule doublet accurately when they are remapped in three dimensions (using the script available below). The 96-nm periodic subvolumes curated above to generate the consensus average of 96-nm repeats were then sorted. The subvolumes corresponding to a particular doublet were then aligned and averaged.
For multibody refinement (schematic workflow in Extended Data Fig. 2c), the subvolumes corresponding to the specific RS-central pair interface were re-extracted based on the subvolumes of 96-nm units of individual doublet microtubules. The particles were recentered at the junction between the head and the stalk of RS2 to include enough features from both the doublets and the central pair complex. The RSs were then aligned with a mask. This mask and a mask covering the central pair complex were used for the multibody analysis implemented in RELION3 (ref. 36). Briefly, separate refinement of the RSs and central pair protrusions provided two sets of alignment parameters: three translational shifts (x, y, z) and three Euler angles required to align one subvolume to each reference. Thus, 12 parameters can be used to remap the two references back to each raw subvolume, and the spatial relationship of the two rigid bodies in each subvolume could be determined by these 12 parameters. Principal-component analyses essentially reprojected the original 12-dimensional data in a new 12-dimensional space with 12 new orthogonal eigenvectors. These 12 eigenvectors could be mathematically determined so that they represent decreasing variations of the entire data along the individual eigenvectors. Our analyses suggest that the first eigenvector or axis is parallel to the axoneme axis and the variations along this axis account for 40–50% of the total variations. When all subvolumes were divided into ten groups based on their projection values on the first axis (10% lowest, 10–20% lowest, …, 90–100% highest). Each group was then represented by a snapshot depicting the averaging projection values of the group members, and ten of these snapshots were morphed to generate the animation (Supplementary Video 1).
The resolutions for maps were estimated based on FSC values of two independently refined half datasets (FSC = 0.143). Local-resolution maps for the consensus averages of doublets and the central pair complex of both human and mouse sperm were calculated by blocres in Bsoft (Supplementary Fig. 2). These local-resolution maps represent relative differences in resolution across the maps, but the absolute values may not be exact. IMOD was used to visualize the tomographic slices55. UCSF Chimera was used to manually segment the maps for various structure features, and these maps were colored individually to prepare the figures using UCSF ChimeraX59,60,61.
Estimation of accumulated offsets in axonemes
![](http://media.springernature.com/relative-r300-703_m1050/springer-static/image/art%3A10.1038%2Fs41594-022-00861-0/MediaObjects/41594_2022_861_Figa_HTML.png)
The bending curvature of mouse sperm could be as large as 2 × 105 m−1 or 0.20 µm−1 based on literature (OD = 5 µm = 5,000 nm)38. The distance between the neighboring doublets is 72 nm (measured in the average of the axoneme shown in Fig. 2d, OB = 5,072 nm). If AB and CD represent 96-nm repeats from doublet 1 and doublet 2, respectively, offset Δ = CE ≈ OC × (∠COD − ∠AOB) = 5,000 × (96 ÷ 5,000 − 96 ÷ 5,072) = 1.4 nm.
Note that the Δ represents the additional offset per 96-nm repeat. In a tomogram that contains an axoneme of ~2 µm, if the offset between the first pair of 96-nm repeats is 0 nm, the offset of the 20th pair is 28 nm. Note that this initial offset (0 nm) is tomogram specific depending on how much sliding has happened upstream or downstream of the imaging area and the imaged cell.
Reporting summary
Further information on research design is available in the Nature Portfolio Reporting Summary linked to this article.
Data availability
The maps of the following structures are available in the Electron Microscopy Data Bank: EMD-27444, consensus average of 96-nm-repeating structure of mouse doublets; EMD-27445, 32-nm-repeating structure of the central pair complex of mouse sperm; EMD-27446, mouse doublet 1; EMD-27447, mouse doublet 2; EMD-27448, mouse doublet 3; EMD-27449, mouse doublet 4; EMD-27450, mouse doublet 5; EMD-27451, mouse doublet 6; EMD-27452, mouse doublet 7; EMD-27453, mouse doublet 8; EMD-27454, mouse doublet 9; EMD-27455, 48-nm-repeating structure of the doublet microtubule of mouse sperm; EMD-27456, 5–6 bridge of mouse sperm; EMD-27462, consensus average of the 96-nm-repeating structure of human doublets; EMD-27463, 32-nm-repeating structure of the central pair complex of human sperm; EMD-27464, human doublet 1; EMD-27465, human doublet 2; EMD-27466, human doublet 3; EMD-27467, human doublet 4; EMD-27468, human doublet 5; EMD-27469, human doublet 6; EMD-27470, human doublet 7; EMD-27471, human doublet 8; EMD-27473, human doublet 9. The raw tilt series of mouse sperm lamellae and the corresponding tilt angle files are available in the EMPIAR database (EMPIAR-11221).
Code availability
The script to remap coordinates of subvolumes in three dimensions is provided as Supplementary Code.
References
Wallmeier, J. et al. Motile ciliopathies. Nat. Rev. Dis. Primers 6, 77 (2020).
Bayless, B. A., Navarro, F. M. & Winey, M. Motile cilia: innovation and insight from ciliate model organisms. Front. Cell Dev. Biol. 7, 265 (2019).
Fawcett, D. W. The mammalian spermatozoon. Dev. Biol. 44, 394–436 (1975).
Ishikawa, T. Axoneme structure from motile cilia. Cold Spring Harb. Perspect. Biol. 9, a028076 (2017).
Satir, P., Heuser, T. & Sale, W. S. A structural basis for how motile cilia beat. Bioscience 64, 1073–1083 (2014).
Satir, P. Studies on cilia. 3. Further studies on the cilium tip and a ‘sliding filament’ model of ciliary motility. J. Cell Biol. 39, 77–94 (1968).
Summers, K. E. & Gibbons, I. R. Adenosine triphosphate-induced sliding of tubules in trypsin-treated flagella of sea-urchin sperm. Proc. Natl Acad. Sci. USA 68, 3092–3096 (1971).
Lindemann, C. B. & Lesich, K. A. The many modes of flagellar and ciliary beating: insights from a physical analysis. Cytoskeleton 78, 36–51 (2021).
Witman, G. B., Plummer, J. & Sander, G. Chlamydomonas flagellar mutants lacking radial spokes and central tubules. Structure, composition, and function of specific axonemal components. J. Cell Biol. 76, 729–747 (1978).
Huang, B., Piperno, G., Ramanis, Z. & Luck, D. J. Radial spokes of Chlamydomonas flagella: genetic analysis of assembly and function. J. Cell Biol. 88, 80–88 (1981).
Smith, E. F. & Sale, W. S. Regulation of dynein-driven microtubule sliding by the radial spokes in flagella. Science 257, 1557–1559 (1992).
Bower, R. et al. The N-DRC forms a conserved biochemical complex that maintains outer doublet alignment and limits microtubule sliding in motile axonemes. Mol. Biol. Cell 24, 1134–1152 (2013).
Grossman-Haham, I. et al. Structure of the radial spoke head and insights into its role in mechanoregulation of ciliary beating. Nat. Struct. Mol. Biol. 28, 20–28 (2021).
Gui, M. et al. Structures of radial spokes and associated complexes important for ciliary motility. Nat. Struct. Mol. Biol. 28, 29–37 (2021).
Pigino, G. et al. Cryoelectron tomography of radial spokes in cilia and flagella. J. Cell Biol. 195, 673–687 (2011).
Bui, K. H., Sakakibara, H., Movassagh, T., Oiwa, K. & Ishikawa, T. Asymmetry of inner dynein arms and inter-doublet links in Chlamydomonas flagella. J. Cell Biol. 186, 437–446 (2009).
Bui, K. H., Yagi, T., Yamamoto, R., Kamiya, R. & Ishikawa, T. Polarity and asymmetry in the arrangement of dynein and related structures in the Chlamydomonas axoneme. J. Cell Biol. 198, 913–925 (2012).
Lin, J., Heuser, T., Song, K., Fu, X. & Nicastro, D. One of the nine doublet microtubules of eukaryotic flagella exhibits unique and partially conserved structures. PLoS ONE 7, e46494 (2012).
Dutcher, S. K. Asymmetries in the cilia of Chlamydomonas. Philos. Trans. R. Soc. Lond. B Biol. Sci. 375, 20190153 (2020).
Muschol, M., Wenders, C. & Wennemuth, G. Four-dimensional analysis by high-speed holographic imaging reveals a chiral memory of sperm flagella. PLoS ONE 13, e0199678 (2018).
Hansen, J. N., Rassmann, S., Jikeli, J. F. & Wachten, D. SpermQ—a simple analysis software to comprehensively study flagellar beating and sperm steering. Cells 8, 10 (2018).
Babcock, D. F., Wandernoth, P. M. & Wennemuth, G. Episodic rolling and transient attachments create diversity in sperm swimming behavior. BMC Biol. 12, 67 (2014).
Leung, M. R. et al. The multi-scale architecture of mammalian sperm flagella and implications for ciliary motility. EMBO J. 40, e107410 (2021).
Nicastro, D. et al. The molecular architecture of axonemes revealed by cryoelectron tomography. Science 313, 944–948 (2006).
Carbajal-Gonzalez, B. I. et al. Conserved structural motifs in the central pair complex of eukaryotic flagella. Cytoskeleton 70, 101–120 (2013).
Gui, M. et al. De novo identification of mammalian ciliary motility proteins using cryo-EM. Cell 184, 5791–5806 (2021).
Ma, M. et al. Structure of the decorated ciliary doublet microtubule. Cell 179, 909–922 (2019).
Ichikawa, M. et al. Subnanometre-resolution structure of the doublet microtubule reveals new classes of microtubule-associated proteins. Nat. Commun. 8, 15035 (2017).
Song, K. et al. In situ structure determination at nanometer resolution using TYGRESS. Nat. Methods 17, 201–208 (2020).
Owa, M. et al. Inner lumen proteins stabilize doublet microtubules in cilia and flagella. Nat. Commun. 10, 1143 (2019).
Lin, J. et al. Cryo-electron tomography reveals ciliary defects underlying human RSPH1 primary ciliary dyskinesia. Nat. Commun. 5, 5727 (2014).
Gadadhar, S. et al. Tubulin glycylation controls axonemal dynein activity, flagellar beat, and male fertility. Science 371, https://doi.org/10.1126/science.abd4914 (2021).
Han, L. et al. Cryo-EM structure of an active central apparatus. Nat. Struct. Mol. Biol. 29, 472–482 (2022).
Gui, M., Wang, X., Dutcher, S. K., Brown, A. & Zhang, R. Ciliary central apparatus structure reveals mechanisms of microtubule patterning. Nat. Struct. Mol. Biol. 29, 483–492 (2022).
Hou, Y. et al. Chlamydomonas FAP70 is a component of the previously uncharacterized ciliary central apparatus projection C2a. J. Cell Sci. 134, jcs258540 (2021).
Nakane, T., Kimanius, D., Lindahl, E. & Scheres, S. H. Characterisation of molecular motions in cryo-EM single-particle data by multi-body refinement in RELION. eLife 7, e36861 (2018).
Linck, R. W., Chemes, H. & Albertini, D. F. The axoneme: the propulsive engine of spermatozoa and cilia and associated ciliopathies leading to infertility. J. Assist. Reprod. Genet. 33, 141–156 (2016).
Lindemann, C. B. & Lesich, K. A. Functional anatomy of the mammalian sperm flagellum. Cytoskeleton 73, 652–669 (2016).
Lindemann, C. B. Functional significance of the outer dense fibers of mammalian sperm examined by computer simulations with the geometric clutch model. Cell Motil. Cytoskeleton 34, 258–270 (1996).
Kikkawa, M., Ishikawa, T., Nakata, T., Wakabayashi, T. & Hirokawa, N. Direct visualization of the microtubule lattice seam both in vitro and in vivo. J. Cell Biol. 127, 1965–1971 (1994).
Zhang, R., Alushin, G. M., Brown, A. & Nogales, E. Mechanistic origin of microtubule dynamic instability and its modulation by EB proteins. Cell 162, 849–859 (2015).
Firat-Karalar, E. N., Sante, J., Elliott, S. & Stearns, T. Proteomic analysis of mammalian sperm cells identifies new components of the centrosome. J. Cell Sci. 127, 4128–4133 (2014).
Warner, F. D. & Satir, P. The structural basis of ciliary bend formation. Radial spoke positional changes accompanying microtubule sliding. J. Cell Biol. 63, 35–63 (1974).
Mitchell, D. R. & Nakatsugawa, M. Bend propagation drives central pair rotation in Chlamydomonas reinhardtii flagella. J. Cell Biol. 166, 709–715 (2004).
Gadelha, H., Hernandez-Herrera, P., Montoya, F., Darszon, A. & Corkidi, G. Human sperm uses asymmetric and anisotropic flagellar controls to regulate swimming symmetry and cell steering. Sci. Adv. 6, eaba5168 (2020).
Lin, J. & Nicastro, D. Targeted dynein inhibition generates flagellar beating. Preprint at biorxiv https://doi.org/10.1101/153254 (2017).
Yamaguchi, H., Oda, T., Kikkawa, M. & Takeda, H. Systematic studies of all PIH proteins in zebrafish reveal their distinct roles in axonemal dynein assembly. eLife 7, e36979 (2018).
Lin, J. & Nicastro, D. Asymmetric distribution and spatial switching of dynein activity generates ciliary motility. Science 360, eaar1968 (2018).
Suarez, S. S. Mammalian sperm interactions with the female reproductive tract. Cell Tissue Res. 363, 185–194 (2016).
van der Spoel, A. C. et al. Reversible infertility in male mice after oral administration of alkylated imino sugars: a nonhormonal approach to male contraception. Proc. Natl Acad. Sci. USA 99, 17173–17178 (2002).
Skinner, W. M., Mannowetz, N., Lishko, P. V. & Roan, N. R. Single-cell motility analysis of tethered human spermatozoa. Bio Protoc. 9, e3182 (2019).
Mastronarde, D. N. Automated electron microscope tomography using robust prediction of specimen movements. J. Struct. Biol. 152, 36–51 (2005).
Zheng, S. Q. et al. MotionCor2: anisotropic correction of beam-induced motion for improved cryo-electron microscopy. Nat. Methods 14, 331–332 (2017).
Zheng, S. et al. AreTomo: an integrated software package for automated marker-free, motion-corrected cryo-electron tomographic alignment and reconstruction. J. Struct. Biol. X 6, 100068 (2022).
Kremer, J. R., Mastronarde, D. N. & McIntosh, J. R. Computer visualization of three-dimensional image data using IMOD. J. Struct. Biol. 116, 71–76 (1996).
Fernandez, J. J., Li, S. & Crowther, R. A. CTF determination and correction in electron cryotomography. Ultramicroscopy 106, 587–596 (2006).
Agulleiro, J. I. & Fernandez, J. J. Tomo3D 2.0—exploitation of advanced vector extensions (AVX) for 3D reconstruction. J. Struct. Biol. 189, 147–152 (2015).
Bharat, T. A. & Scheres, S. H. Resolving macromolecular structures from electron cryo-tomography data using subtomogram averaging in RELION. Nat. Protoc. 11, 2054–2065 (2016).
Pettersen, E. F. et al. UCSF Chimera—a visualization system for exploratory research and analysis. J. Comput. Chem. 25, 1605–1612 (2004).
Goddard, T. D. et al. UCSF ChimeraX: meeting modern challenges in visualization and analysis. Protein Sci. 27, 14–25 (2018).
Pettersen, E. F. et al. UCSF ChimeraX: structure visualization for researchers, educators, and developers. Protein Sci. 30, 70–82 (2021).
Acknowledgements
We are grateful to members of the Vale and Agard laboratories for discussions and critical reading of the manuscript. We thank Shixin Yang from the cryo-EM facility at Janelia Research Campus for his assistance with data collection. We thank Caiying Guo for generously sharing the resources required for the mouse experiments. We thank Zanlin Yu, Eric Tse and David Bulkley in the University of California, San Fransisco (UCSF) EM core facility for their assistance with data collection. We thank Sam Li and Shawn Zheng at UCSF for suggestions on EM data processing. We thank Tom Goddard at UCSF for providing a script to mark coordinates of subtomograms. We used and appreciated computing resources at both the workstations at Janelia Research Campus and the HPC Facility at UCSF. Z.C. was supported by the Helen Hay Whitney Foundation Postdoctoral Fellowship. W.M.S. was supported by the National Science Foundation Graduate Research Fellowship Program under grant numbers DGE 1752814 and DGE 2146752. Any opinions, findings and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation. P.V.L. received funding from a Pew Biomedical Scholars Award and a GCRLE grant from the Global Consortium for Reproductive Longevity and Equality made possible by the Bia-Echo Foundation. D.A.A. received funding from NIH R35GM118099. R.D.V. received funding from NIH R35GM118106 and the Howard Hughes Medical Institute. The UCSF cryo-EM facility has been supported by NIH grants 1S10OD026881, 1S10OD020054 and 1S10OD021741.
Author information
Authors and Affiliations
Contributions
Z.C., G.A.G., D.A.A. and R.D.V. conceived the project and designed the experiments after discussions with other authors. S.Z. provided the mouse sperm sample. M.S. and Z.C. prepared mouse sperm lamellar grids. W.M.S. and P.V.L. provided human sperm samples. Z.C. and Y.L. prepared the human sperm grids. M.S., Z.C. and G.A.G. performed FIB–SEM processing. Z.C. and Z.Y. optimized data collection. Z.C. processed the data with help from M.S., X.Z. and R.Y. and suggestions from G.A.G. and D.A.A. Z.C. and R.D.V. wrote the manuscript draft with the help of comments from all authors.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Structural & Molecular Biology thanks Girish Mali and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Primary Handling Editors: Carolina Perdigoto and Florian Ullrich, in collaboration with the Nature Structural & Molecular Biology team. Peer reviewer reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data
Extended Data Fig. 1 The workflow of FIB-SEM/cryo-ET and representative images.
a, Schematic of EM grids with vitrified mouse sperm. An example for where the windows were milled by FIB-SEM is denoted by two yellow boxes. b, SEM (left) and FIB (right) images of a lamella are shown (scale bar: 5 µm, N = 200 lamellae). c, A low-magnification montage and its zoom-in view of a lamella acquired using TEM (scale bar: 1 µm, N = 200 lamellae). Axonemes and mitochondria are indicated by white arrowheads and an arrow, respectively. d, A representative image of non-milled sperm axoneme recorded by 300 kV Titan Krios TEM at a total dose of 3 e−/Å2 (scale bar: 100 nm, N = 10 tilt series, not processed further). e, A representative image of milled lamella (thickness ~300 nm) is shown (scale bar: 50 nm, N = 69 tilt series). The zoom-in region in f is outlined (the red rectangle). f, Individual protofilaments of microtubules and double−bilayer membranes of the mitochondria are indicated by yellow arrows and arrowheads. g, Fourier transform of the image in e is shown and the upper limit of ctf fitting when using CTFFIND4 is indicated (at the pixel size of 3.53 Å, N = 69 zero-tilt images). h, i, Two sections of 3D tomograms are shown. Outer arm dyneins (every 24 nm) anchored on doublet microtubules are indicated in h (red arrowheads). Protrusions (every 32 nm) extending from the singlet microtubule are indicated in i (black arrowheads). Periodic patterns of three radial spokes on the doublet microtubules (every 96 nm) are grouped and indicated in i (black brackets) (scale bar: 50 nm, N = 69 tomograms).
Extended Data Fig. 2 Schematics of data processing.
a, A schematic of the processing workflow of 96 nm-repeating units of doublets to achieve the consensus average combining data from all nine doublets. An example of remapping of the centers of the final subvolumes in three dimensions is shown. b, A schematic of the processing workflow of 32 nm-repeating units of central complex to achieve the subvolume average. Recentering of subvolumes of the central pair complex (every 32 nm) on the doublet 1 is shown. Remapping of these subvolumes helps to trace the trajectory of doublet 1 in three dimensions. The centers of these doublet 1 subvolumes are shown in the same tomogram as in a. c, A schematic of the workflow of multi-body refinement.
Extended Data Fig. 3 MIPs network in A-tubule of doublet microtubules.
a, Four cross-section views of the A tubule in the doublet microtubule are shown. The MIPs network is colored in orange. Three modes of interactions between the MIPs and the protofilaments are observed (see text). The protrusions from the filamentous core are indicated by empty red arrowheads and dashed cyan ovals, respectively. b, Six cross-section views of the overlay of the average of the 48-nm repeat of doublets of mouse sperm (orange, this study) and the 48-nm repeat of doublets of bovine trachea cilia (blue, EMD-24664)26. The contour levels of the two maps are adjusted so that the densities of microtubules are matched. The microtubule seam, A9 and A10 protofilaments are labeled in all views. Note there are additional densities near A9-A10 region in the mouse sperm axoneme (black circles). We observed density striations in the B-tubule in some cross sections. c, An orthogonal view of the B-tubule striations along the helical pitch of the microtubule at a high and a low threshold, respectively. Note the striations are separated by 8 nm and they cover the intradimeric interface between the α- and β-tubulins based on the model for the bovine doublet (PDB: 7rro)26.
Extended Data Fig. 4 Comparisons of dyneins and radial spokes of mouse sperm axonemes to published equivalent structures from other motile cilia.
a, Comparison of outer arm dyneins in mouse sperm axoneme (this study) and reported maps for those from sea urchin sperm (EMD-8835 and EMD-8836)46. b, Comparison of inner arm dyneins in mouse sperm axoneme (this study) and published maps for those from sea urchin sperm (EMD-8837 and EMD-8838)46. Note the barrel densities between RS1 and RS2 only exist in the mouse sperm are indicated (dashed ovals). c, Comparison of radial spokes of mouse sperm axoneme (this study) and the ones from motile cilia of Chlamydomonas (EMD-976830 and EMD-2247514) and Tetrahymena (EMD-9023)29. Note the RS3 stump in Chlamydomonas is much shorter than the others and the head of RS3 from Tetrahymena has a smaller surface area. d-f, The doublet average of mouse sperm axoneme is low-pass filtered to 50 Å and viewed from different angles. Note this resolution is lower than published axoneme maps (for example 34 Å for EMD-5950 shown in Fig. 1 for comparison)31. The extensive network of MIPs (d), extra densities at N-DRC (e) and radial spokes (f) remain apparent while comparing to human respiratory cilia, suggesting the presence of novel densities in our maps are not due to higher resolutions, but most likely the presence of additional proteins.
Extended Data Fig. 5 The central pair complex in mouse axoneme possesses more MIPs but the overall shape is similar to the one from sea urchin sperm.
a, Two longitudinal views of the MIPs inside the two singlet microtubules are shown. Periodic features (every 32 nm) are indicated (red empty arrowheads). b, The average of the central pair complex in mouse sperm axonemes is overlaid on the map for the central pair complex from sea urchin sperm (EMD-9385) and they are colored in grey and cyan, respectively25. Note most of the protrusions are very similar and the sea urchin-specific protrusion 1f is indicated in the middle panel (red arrowhead). c, The average of the central pair complex in mouse sperm axonemes is overlaid on the map for the central pair complex from Chlamydomonas (EMD-31143)35. Note the maps are aligned based on the similar C1 protrusions 1d. Other protrusions are generally less similar (1a, 1f and 2d) and there appears to be an 8-nm shift for the C2 protrusions. The Chlamydomonas C2 microtubule was recently shown to possess two possible registers with 8-nm longitudinal differences33. d, The spatial relationship between the nine radial spokes and the central pair complex are determined by multibody refinement and the ‘average positioning’ of these two rigid bodies are shown (RS-CP1 denotes the interface between radial spokes from doublet 1 and the central pair.
Extended Data Fig. 6 The 5-6 bridge of mouse sperm axonemes.
a-d, Four views of the composite map for 5-6 bridge in mouse sperm axonemes combining maps for local refinement of the doublet 5, doublet 6 and the bridge. The inner arm dyneins, radial spokes, the barrel, N-DRC and extra bridge densities are colored in pink, different shades of cyan, light blue, green and blue, respectively. Note that the radial spokes which repeat every 96 nm on doublet 5 and doublet 6 are resolved and there appears to be a ~20 nm offset between their longitudinal registers, as indicated in the staggering distance of RS1 and RS2 from doublet 5 and doublet 6 in d. e, f, Two cut-in views of a and c are shown. Bridge−specific densities are highlighted in blue. These densities extend from the inner arm dyneins of doublet 5 towards the microtubule of doublet 6. Direct contacts of the bridge-specific densities to doublet 6 is indicated by the solid red arrowhead while densities in close proximity of the base of radial spoke 2 in doublet 6 are indicated by the empty red arrowhead. g, h, Subvolumes for doublet 1 was aligned and equivalent views of doublet 1 and 2 are shown (as in panel a and b). The expected positions for dyneins and radial spokes on doublet 2 are circled by dashed and solid red ovals. These 96 nm-repeating structures on doublet 2 are not resolved even after local refinement, suggesting the offsets between doublet 1 and doublet 2 are not consistent. The microtubule from doublet 2 is nevertheless partially resolved since variant longitudinal mismatching would not smear a tube of ‘continuous densities’ compared to ‘discrete densities’ like dyneins and radial spokes through averaging.
Extended Data Fig. 7 The inner arm dyneins in doublet 5 and doublet 9 differ from the consensus average in mouse sperm axonemes.
a, An overlay of inner arm dyneins from doublet 5 and the concensus average. The assigned inner arm dyneins, N-DRC and 5–6 bridge densities from the doublet 5 are colored in pink, green and blue, respectively while the densities for the consensus average are in grey. Different inner arm dyneins are named according to the nomenclature defined by studies of Chlamydomonas flagella. The shifted positions of dynein e and dynein g are indicated by the two yellow arrows. b, An overlay of inner arm dyneins from doublet 9 and the consensus average were blue and grey, respectively. Note dynein b in doublet 9 is not resolved.
Extended Data Fig. 8 Longitudinal consistency of doublets in mouse sperm axonemes.
a, Schematic of a mouse sperm flagella with the basal region (< 2 µm), midpiece and principal piece highlighted in the top panel. Subvolume averages of doublet 2 and doublet 7 from the midpiece and the principal piece are shown. The shapes of densities for the scaffolds at the base of radial spoke 3 appear different in doublet 2 and are circled. Additional densities at the base of radial spoke 1 in the doublet 7 in the midpiece region are observed and circled. b, Four xz slices of tomograms in different regions of the mouse sperm flagella are shown. Outer dense fibers that are in close proximity to the doublets and the ones with gaps in between are indicated (red and blue arrowheads, respectively) (scale bars: 100 nm). c, Two xy slices of two 3D tomograms of the basal region of mouse sperm axoneme are shown. The singlet microtubules of the central pair complex extend further into the cell bodies and the beginning of the doublet microtubules are indicated by the arrows and arrowheads, respectively (scale bars: 200 nm). d, Densities corresponding to different protein complexes from subvolume averages of the basal region (6 tomograms, N = 670 subtomograms) and the consensus average are overlaid and colored in blue and grey, respectively. Note the sperm-specific features in N-DRC and radial spokes exist in the average of doublets in the basal region and are highlighted using empty red arrowheads.
Extended Data Fig. 9 CryoET data of human sperm without milling and asymmetric distribution of sperm-specific features in N-DRCs in human sperm.
a, A representative xy slice of a tomogram of human sperm (pixel size=10.648 Å, image thickness: 1, scale bar: 100 nm). Although the A- and B-tubule of the microtubule doublets are discernible, other features like axonemal dyneins and radial spokes are not clear in this slice (in contrast to Extended Data Fig. 1h-i). b, A representative xz slice of the same tomogram of human sperm (pixel size=10.648 Å, image thickness: 5, displayed in IMOD) (scale bar: 100 nm). c, A representative xz slice of a tomogram of mouse sperm lamella (pixel size=14.12 Å, image thickness: 10, displayed in IMOD). The red bar indicates how we measure the thickness of the lamella (scale bar: 100 nm). d, A representative xz slice of a tomogram of human sperm (pixel size=10.648 Å, image thickness: 100, displayed in IMOD). Gold beads on the top and bottom surfaces are circled and the red bar indicates how we measure the thickness of the ice near the cell. The top and bottom membrane of the sperm cells is not resolved due to the missing wedge so the actual thickness is larger than the measured thickness of ice in the vicinity (scale bar: 100 nm). e, A dot plot showing the thickness of lamellae of mouse sperm and ice near human sperm as a lower bound estimate of the actual cells. The means and standard deviations are indicated (for N = 69 mouse sperm tomograms and N = 59 human sperm tomograms). f, Densities corresponding to N-DRCs from the nine per-doublet averages are shown around a schematic of the (9 + 2)- axoneme. Common features among the N-DRC are colored in grey, while the unique features are highlighted in various colors.
Supplementary information
Supplementary Information
Supplementary Figs. 1 and 2 and Table 1
Supplementary Video 1
The structure of the RS barrel.
Supplementary Video 2
The movie contains ten frames, and each frame represents an average of one-tenth of the total populations distributed along the first component of the principal-component analysis. The different frames indicate that the RSs and the central pair complex can come together at different longitudinal offsets. The interface between doublet 6 and the central pair protrusion 1b is used as an example here.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Chen, Z., Greenan, G.A., Shiozaki, M. et al. In situ cryo-electron tomography reveals the asymmetric architecture of mammalian sperm axonemes. Nat Struct Mol Biol 30, 360–369 (2023). https://doi.org/10.1038/s41594-022-00861-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41594-022-00861-0
- Springer Nature America, Inc.
This article is cited by
-
Multi-scale structures of the mammalian radial spoke and divergence of axonemal complexes in ependymal cilia
Nature Communications (2024)
-
Bridging structural and cell biology with cryo-electron microscopy
Nature (2024)
-
Emerging mechanistic understanding of cilia function in cellular signalling
Nature Reviews Molecular Cell Biology (2024)
-
Stepwise assembly and release of Tc toxins from Yersinia entomophaga
Nature Microbiology (2024)
-
Spokes and barrels tune the asymmetric beating of mammalian sperm flagella
Nature Structural & Molecular Biology (2023)