Abstract
Iron–chromium and nickel–chromium binary alloys containing sufficient quantities of chromium serve as the prototypical corrosion-resistant metals owing to the presence of a nanometre-thick protective passive oxide film1,2,3,4,5,6,7,8. Should this film be compromised by a scratch or abrasive wear, it reforms with little accompanying metal dissolution, a key criterion for good passive behaviour. This is a principal reason that stainless steels and other chromium-containing alloys are used in critical applications ranging from biomedical implants to nuclear reactor components9,10. Unravelling the compositional dependence of this electrochemical behaviour is a long-standing unanswered question in corrosion science. Herein, we develop a percolation theory of alloy passivation based on two-dimensional to three-dimensional crossover effects that accounts for selective dissolution and the quantity of metal dissolved during the initial stage of passive film formation. We validate this theory both experimentally and by kinetic Monte Carlo simulation. Our results reveal a path forward for the design of corrosion-resistant metallic alloys.
Similar content being viewed by others
Data availability
The data used in this study are available from the corresponding author upon request.
Code availability
The KMC and data analysis computer codes used in this study are available from the corresponding author upon request.
References
McCafferty, E. Introduction to Corrosion Science (Springer, 2010).
Uhlig, H. H. & Woodside, G. E. Anodic polarization of passive and non-passive chromium–iron alloys. J. Phys. Chem. 57, 280–283 (1953).
Kirchheim, R. et al. The passivity of iron-chromium alloys. Corros. Sci. 29, 899–917 (1989).
King, P. F. & Uhlig, H. H. Passivity in the iron-chromium binary alloys. J. Phys. Chem. 63, 2026–2032 (1959).
Williams, D. E., Newman, R. C., Song, Q. & Kelly, R. G. Passivity breakdown and pitting corrosion of binary alloys. Nature 350, 216–219 (1991).
Diawara, B., Beh, Y.-A. & Marcus, P. Nucleation and growth of oxide layers on stainless steels (FeCr) using a virtual oxide layer model. J. Phys. Chem. C 114, 19299–19307 (2010).
Hamm, D., Ogle, K., Olsson, C.-O., Weber, S. & Landolt, S. Passivation of Fe–Cr alloys studied with ICP-AES and EQCM. Corros. Sci. 44, 1443–1456 (2002).
Davenport, A. J. et al. In situ synchrotron X-ray microprobe studies of passivation thresholds in Fe-Cr alloys. J. Electrochem. Soc. 148, B217–B221 (2001).
Odette, R. & Zinkle, S. Structural Alloys for Nuclear Energy Applications (Elsevier, 2019).
Niinomi, M., Nakai, M. & Hieda, J. Development of new metallic alloys for biomedical applications. Acta Biomater. 11, 3888–3903 (2012).
Miracle, D. B. & Senkov, O. N. A critical review of high entropy alloys and related concepts. Acta Mater. 122, 448–511 (2017).
George, E. P., Raabe, D. & Ritchie, R. O. High-entropy alloys. Nat. Rev. Mater. 4, 515–534 (2019).
Troparevsky, M. C., Morris, J. R., Kent, P. R. C., Lupini, A. R. & Stocks, G. M. Criteria for predicting the formation of single-phase high entropy alloys. Phys. Rev. X 5, 011041 (2015).
Huang, L.-F., Scully, J. R. & Rondenelli, J. M. Modeling corrosion with first principles electrochemical phase diagrams. Annu. Rev. Mater. Res. 49, 53–77 (2019).
Huang, L.-F. & Rondenelli, J. M. Electrochemical phase diagrams of Ni from ab initio simulations: role of exchange interactions on accuracy. J. Phys. Condens. Mat. 29, 475501 (2017).
Yu, X. et al. Nonequilibrium solute capture in passivating oxide films. Phys. Rev. Lett. 121, 145701 (2018).
Sherman, Q., Voorhees, P. W. & Marks, L. D. Thermodynamics of solute capture during the oxidation of multicomponent metals. Acta Mater. 181, 584–594 (2019).
Frankenthal, R. P. On the passivity of iron‐chromium alloys I. Reversible primary passivation and secondary film formation. J. Electrochem. Soc. 114, 542–547 (1967).
Bastek, P. D., Newman, R. C. & Kelly, R. G. Measurement of passive film effects on scratched electrode behavior. J. Electrochem. Soc. 140, 1884–1889 (1993).
Sieradzki, K. & Newman, R. C. A percolation model for passivation in stainless steels. J. Electrochem. Soc. 133, 1979–1980 (1985).
Shannon, R. D. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Cryst. A32, 751–767 (1976) .
Liu, M., Aiello, A., Xie, Y. & Sieradzki, K. The effect of short range order on the passivation of Fe-Cr alloys. J. Electrochem. Soc. 165, C830–C834 (2018).
Shante, V. K. S. & Kirkpatrick, S. An introduction to percolation theory. Adv. Phys. 20, 325–357 (1971).
Sykes, M. F. & Glen, M. Percolation processes in two dimensions. I. Low-density series expansions. J. Phys. A Math. Gen. 9, 87–95 (1976).
Sykes, M. F. & Glen, M. Percolation processes in three dimensions. J. Phys. A Math. Gen. 9, 1705–1712 (1976).
Stauffer, D. & Aharony, A. Introduction to Percolation Theory 2nd edn (Taylor & Francis, 1992).
Sotta, P. & Long, D. The crossover from 2D to 3D percolation: theory and numerical simulations. Eur. Phys. J. E 11, 375–388 (2003).
Clerc, J. P., Giraud, G., Alexander, S. & Guyon, E. Conductivity of a mixture of conducting and insulating grains: dimensionality effects. Phys. Rev. B 22, 2489–2494 (1980).
Lopes, P. P. et al. Relationships between atomic level surface structure and stability. ACS Catal. 6, 2536–2544 (2016).
Liu, Y. et al. Stability limits and defect dynamics in Ag nanoparticles probed by Bragg coherent diffractive imaging. Nano Lett. 17, 1595–1601 (2017).
Gaskell, G. R. Introduction to the Thermodynamics of Materials 4th edn (Taylor & Francis, 2003).
Reynolds, P. J., Stanley, H. E. & Klein, W. Large-cell Monte Carlo renormalization group for percolation. Phys. Rev. B 21, 1223–1245 (1980).
May, T. W. & Wiedmeyer, R. H. A table of polyatomic interferences in ICP-MS. At. Spectrosc. 19, 150–155 (1998).
Acknowledgements
K.S., A.A. and Y.X. acknowledge funding from the National Science Foundation under award DMR-1708459. M.L.T. and K.S. acknowledge funding in part from the Office of Naval Research, Multidisciplinary University Research Initiative programme under award N00014-20-1-2368. D.M.A. and R.C.N. were funded by NSERC (Canada) and UNENE, the University Network of Excellence in Nuclear Engineering. P.P.L. acknowledges support by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division.
Author information
Authors and Affiliations
Contributions
Y.X. and A.A. performed the electrochemical experiments. P.P.L. performed the in situ ICPMS measurement of the dissolution profile for the alloys. Y.X., D.W. and H.Z. performed the first-principles-based calculations, and J.L.H., E.A. and M.L.T. performed the supplementary scanning transmission electron microscopy (STEM) analysis. D.M.A. performed the KMC simulations and the MC-RNG analysis with input from R.C.N. and K.S.; Y.X., R.C.N., A.A. and K.S. analysed and interpreted all the results. K.S. conceived and supervised the study.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Materials thanks Sannakaisa Virtanen, David Williams and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary Discussion, Figs. 1–10, Tables 1–3 and refs. 1–20.
Rights and permissions
About this article
Cite this article
Xie, Y., Artymowicz, D.M., Lopes, P.P. et al. A percolation theory for designing corrosion-resistant alloys. Nat. Mater. 20, 789–793 (2021). https://doi.org/10.1038/s41563-021-00920-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41563-021-00920-9
- Springer Nature Limited
This article is cited by
-
How solute atoms control aqueous corrosion of Al-alloys
Nature Communications (2024)
-
Engineering nanocellulose percolation network for flexible strain sensor
Cellulose (2024)
-
3D DEM investigation on percolation of lubricant particles during uniaxial metal powder compaction
Granular Matter (2024)
-
3D printed N-doped CoCrFeNi high entropy alloy with more than doubled corrosion resistance in dilute sulphuric acid
npj Materials Degradation (2023)
-
Elemental partitioning and corrosion resistance of Ni–Cr alloys revealed by accurate ab-initio thermodynamic and electrochemical calculations
npj Materials Degradation (2023)