Abstract
The implementation of high fidelity two-qubit gates is a bottleneck in the progress toward universal quantum computation in semiconductor quantum dot qubits. We study capacitive coupling between two triple quantum dot spin qubits encoded in the S = 1/2, Sz = −1/2 decoherence-free subspace—the exchange-only (EO) spin qubits. We report exact gate sequences for CPHASE and CNOT gates, and demonstrate theoretically, the existence of multiple two-qubit sweet spots (2QSS) in the parameter space of capacitively coupled EO qubits. Gate operations have the advantage of being all-electrical, but charge noise that couple to electrical parameters of the qubits cause decoherence. Assuming noise with a 1/f spectrum, two-qubit gate fidelities and times are calculated, which provide useful information on the noise threshold necessary for fault-tolerance. We study two-qubit gates at single and multiple parameter 2QSS. In particular, for two existing EO implementations—the resonant exchange (RX) and the always-on exchange-only (AEON) qubits—we compare two-qubit gate fidelities and times at positions in parameter space where the 2QSS are simultaneously single-qubit sweet spots (1QSS) for the RX and AEON. These results provide a potential route to the realization of high fidelity quantum computation.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Introduction
Semiconductor quantum dots are one of the leading platforms for building a quantum computer. They present promises of scalability, coherence, and integration with existing microelectronics technologies1,2. High fidelity gate operations have been demonstrated in single quantum dot (QD)3,4, double QD5,6,7,8,9,10, and triple quantum dot (TQD)11,12,13 architectures. In particular, qubits encoded in the decoherence-free subspace of three electron spins14,15,16,17 have the advantage of fast, all-electrical control. Single-qubit gates are based on the exchange interaction, hence its namesake, the exchange-only (EO) qubit14. The total spin of three electrons comprise a S = 3/2 quadruplet and two S = 1/2 degenerate doublets, whose degeneracy can be lifted by an external magnetic field. Logical qubit states are encoded in the total spin S = 1/2, Sz = −1/2 doublet, which provides immunity against collective decoherence.
The implementation of high fidelity two-qubit gates is a bottleneck in the progress toward universal, fault-tolerant quantum computation. Two-qubit entangling gates can be based on exchange14 or capacitive18,19,20,21 coupling. Exchange is fast but short-ranged, giving rise to hybrid approaches like spin-shuttling22,23,24,25,26 and circuit QED27,28. Because exchange arises from spin-conserving tunneling, two-qubit exchange gates have potential for leakage. On the other hand, capacitive coupling, which arises from electrostatic Coulomb interaction, allows for a longer range of interaction, has less stringent QD addressability requirements, and alleviates the problem of leakage.
We study two capacitively coupled EO qubits, and report exact gate sequences for CPHASE and CNOT gates. The non-local gate is implemented in a single time interval, in contrast to exchange gating which requires several steps14,15,29. A major progress in refs. 30,31 was to propose a single pulse exchange gate, in the negligible transverse coupling limit. Single and two-qubit operations are all-electrical, but charge noise, ubiquitous in the solid-state environment32, couple to electrical parameters of the qubits and cause decoherence.
Sweet spots33,34 are flat points in the energy landscape which provide protection from parameter fluctuations due to noise. For two existing implementations of the EO qubit—always-on exchange-only (AEON)31 and resonant exchange (RX)30,35,36,37,38 qubits—single-qubit sweet spots (1QSS) have been studied. In ref. 31, two-qubit sweet spots (2QSS) for exchange coupling was reported. However, sweet spots for capacitive coupling have not been studied, a knowledge gap which we address. We show theoretically, in the weak noise, perturbative limit, that 2QSS exist for single-qubit parameters, εm, tl, and tr, in both control and target qubits. This enables two-qubit gates to be operated at positions in parameter space which are either (1) a single parameter 2QSS, or (2) simultaneously two parameter 2QSS in εm and tl (or tr), or (3) simultaneously εm 2QSS and ε 1QSS. For (3), this requires tuning to a particular tunnel coupling ratio, so that the εm 2QSS overlaps with the 1QSS of RX and AEON. Finally, we discuss existence conditions for 2QSS, optimal choices of working points, and address further fidelity optimization.
Results
Two-qubit Hamiltonian
We study capacitively coupled EO qubits in a linear array of two TQDs (Fig. 1a). The left/right TQD (qubit A/B) is the control/target qubit in CPHASE and CNOT gates. QDs are numbered as shown in Fig. 1a. Within each TQD, there are four independently tunable parameters—left/right tunnel couplings tl/r, and detunings for outer and middle QDs, ε and εm. They are defined for qubits A and B: \({\varepsilon }_{{\rm{A}}}\equiv \left({\varepsilon }_{1}-{\varepsilon }_{3}\right)/2\), \({\varepsilon }_{{\rm{B}}}\equiv \left({\varepsilon }_{4}-{\varepsilon }_{6}\right)/2\), \({\varepsilon }_{{\rm{mA}}}\equiv {\varepsilon }_{2}-\left({\varepsilon }_{1}+{\varepsilon }_{3}\right)/2\), and \({\varepsilon }_{{\rm{mB}}}\equiv {\varepsilon }_{5}-\left({\varepsilon }_{4}+{\varepsilon }_{6}\right)/2\), and schematically represented for qubit A in Fig. 1b.
a Two EO qubits in a linear quantum dot (QD) array, with qubit A (B) in QDs 1–3 (4–6). We take a = 50 nm, R = 160 nm, with QD Bohr radius, aB = 25 nm in our calculations. Qubit A (B) is the control (target) qubit in the CPHASE and CNOT gates studied. The capacitive coupling between qubits is given by \({\hat{H}}_{{\rm{int}}}\) (Eq. (6)). b Schematic of parameters in qubit A. Left/right tunnel couplings are given by tlA/rA. Detuning parameters εi control the relative single-particle energies between QDs, represented by arrows from a reference energy to the ground orbital energy of each QD. Outer and middle detunings, \({\varepsilon }_{{\rm{A}}}\equiv \left({\varepsilon }_{1}-{\varepsilon }_{3}\right)/2\) and \({\varepsilon }_{{\rm{mA}}}\equiv {\varepsilon }_{2}-\left({\varepsilon }_{1}+{\varepsilon }_{3}\right)/2\), with the tunnel couplings are sufficient to describe single-qubit dynamics. For all our results, we take a reflection symmetry in the parameters of the two qubits: εB = −εA, εmB = εmA, tlB = trA, and trB = tlA. c Detuning space of an EO qubit and charge occupation numbers. The AEON single-qubit double (ε and εm) sweet spot is at the center of the (1,1,1) region at \((\varepsilon ,{\varepsilon }_{{\rm{m}}})=(0,{U}^{^{\prime\prime} }-{U}^{\prime})\) (white circle). The RX single-qubit working region is indicated by the dashed triangle. In our study, the RX working point is taken to be at \((\varepsilon ,{\varepsilon }_{{\rm{m}}})=(0,{U}^{\prime})\) (i.e., at its single-qubit ε sweet spot for equal tunnel couplings).
Each EO qubit is fully described by the Hubbard Hamiltonian39,
Here, \({\hat{H}}_{{\rm{t}}}={\sum }_{\,{<}\,i,j \,{>}\,}{\sum }_{\sigma }{t}_{ij}{\hat{c}}_{i\sigma }^{\dagger }{\hat{c}}_{j\sigma }\) is nearest-neighbor tunneling, with spin index σ = {↑, ↓} and QD indices i, j run from dots 1–3 (4–6) for qubit A (B). Tunnel couplings t12 ≡ tlA, t23 ≡ trA, t45 ≡ tlB, and t56 ≡ trB. There is no tunnel coupling between the TQDs, i.e., t34 = 0. The detuning term is \({\hat{H}}_{{\rm{\varepsilon }}}={\sum }_{i,\sigma }{\varepsilon }_{i}{\hat{n}}_{i\sigma }\), where the number operator \({\hat{n}}_{i\sigma }\equiv {\hat{c}}_{i\sigma }^{\dagger }{\hat{c}}_{i\sigma }\). The Coulomb energy term is \({\hat{H}}_{{\rm{U}}}={\sum }_{i}{U}_{i}{\hat{n}}_{i\uparrow }{\hat{n}}_{i\downarrow }+\frac{1}{2}{\sum }_{i}{\sum }_{j\ne i}{U}_{ij}{\hat{n}}_{i}{\hat{n}}_{j}\), where the first term is intra-dot, the second term is inter-dot Coulomb energies, and \({\hat{n}}_{i}={\hat{n}}_{i\uparrow }+{\hat{n}}_{i\downarrow }\). We consider inter-dot Coulomb energies between all neighbors.
In the perturbative limit tl/r ≪ Uij < Ui, each EO qubit operates in the (1,1,1) charge state, where numbers represent electron occupation in left, middle, and right dots. This is shown by the central region in detuning space for one qubit in Fig. 1c. However, the encoded logical “1” state of the qubit comprises small charge admixtures of doubly occupied charge states (1,0,2), (2,0,1), (0,2,1), and (1,2,0), with a singly-occupied (1,1,1) state. This results in an effective exchange coupling with the encoded logical “0” state.
The basis states for qubit A are the singly-occupied encoded qubit states \(\left|{1}_{{\rm{A}}}\right\rangle \equiv \left(\left|\,{\downarrow }_{1}{\downarrow }_{2}{\uparrow }_{3}\right\rangle -\left|\,{\uparrow }_{1}{\downarrow }_{2}{\downarrow }_{3}\right\rangle \right)/\sqrt{2}\), and \(\left|{0}_{{\rm{A}}}\right\rangle \equiv \left(2\left|\,{\downarrow }_{1}{\uparrow }_{2}{\downarrow }_{3}\right\rangle -\left|\,{\downarrow }_{1}{\downarrow }_{2}{\uparrow }_{3}\right\rangle -\left|\,{\uparrow }_{1}{\downarrow }_{2}{\downarrow }_{3}\right\rangle \right)/\sqrt{6}\), and four states comprising a singly- and a doubly-occupied QD residing in the same spin space, \(\left|{{\rm{A}}}_{1}\right\rangle \equiv \left|\,{\downarrow }_{1}{\uparrow }_{3}{\downarrow }_{3}\right\rangle\), \(\left|{{\rm{A}}}_{2}\right\rangle \equiv \left|\,{\uparrow }_{1}{\downarrow }_{1}{\downarrow }_{3}\right\rangle\), \(\left|{{\rm{A}}}_{3}\right\rangle \equiv \left|\,{\downarrow }_{1}{\uparrow }_{2}{\downarrow }_{2}\right\rangle\), and \(\left|{{\rm{A}}}_{4}\right\rangle \equiv \left|\,{\uparrow }_{2}{\downarrow }_{2}{\downarrow }_{3}\right\rangle\). Subscripts label QD numbers. Basis states \(\{\left|{0}_{{\rm{B}}}\right\rangle ,\left|{1}_{{\rm{B}}}\right\rangle ,\left|{{\rm{B}}}_{i = 1\ldots 4}\right\rangle \}\) for qubit B can be written by mapping the QD indices (1, 2, 3) → (4, 5, 6). With the six-dimensional basis of each qubit, the Schrieffer-Wolff transformation40,41,42 gives effective single-qubit Hamiltonians,
where \(\hslash \omega \equiv 2\left({t}_{{\rm{l}}}^{2}{b}_{-}+{t}_{{\rm{r}}}^{2}{b}_{+}\right)\), \(\hslash g\equiv 2\sqrt{3}\left({t}_{{\rm{l}}}^{2}{b}_{-}-{t}_{{\rm{r}}}^{2}{b}_{+}\right)\), and \({b}_{\pm }\equiv 1/\left(U-{U}^{^{\prime\prime} }\pm \varepsilon +{\varepsilon }_{{\rm{m}}}\right)+1/\left(U-2{U}^{\prime}+{U}^{^{\prime\prime} }\mp \varepsilon -{\varepsilon }_{{\rm{m}}}\right)\). (Qubit subscripts A, B have been omitted for brevity here.) In the derivation, we assumed identical QDs: Ui ≡ U for all i, \({U}_{12}={U}_{23}={U}_{45}={U}_{56}\equiv {U}^{\prime}\) and U13 = U46 ≡ U″ (for numerical values, see “Methods”). Encoded states, dressed by charge admixtures, and denoted with a prime, are
where \(\sqrt{{N}_{{\rm{A/B}}}}\) are normalization constants. Admixtures αi, βi depend on electrical parameters tl/r, ε, and εm, which are detailed in Supplementary Method 1.
Two-qubit capacitive coupling arises from the inter-dot Coulomb interaction between the TQDs, \({\hat{H}}_{{\rm{int}}}=\mathop{\sum }\nolimits_{i = 1}^{3}\mathop{\sum }\nolimits_{j = 4}^{6}{{\mathcal{V}}}_{ij}{\hat{n}}_{i}{\hat{n}}_{j}\). We denote inter-TQD Coulomb terms by \({{\mathcal{V}}}_{ij}\) to distinguish them from intra-TQD terms Uij. This distinction is for notational clarity; the physical basis—electrostatic interaction—is the same. In the computational basis \(\{\left|{0}_{{\rm{A}}}{0}_{{\rm{B}}}\right\rangle ,\left|{0}_{A}{1}_{{\rm{B}}}^{\prime}\right\rangle ,\left|{1}_{{\rm{A}}}^{\prime}{0}_{{\rm{B}}}\right\rangle ,\left|{1}_{{\rm{A}}}^{\prime}{1}_{{\rm{B}}}^{\prime}\right\rangle \}\), the two-qubit capacitive coupling is diagonal, given by
which comprises a global phase, single-qubit energy shifts, and a \({\hat{\sigma }}_{z}\otimes {\hat{\sigma }}_{z}\) term equivalent to the Ising (ZZ) model (see Supplementary Note 1). Tri-quadratic confinement potentials (see “Methods”) provide analytical expressions for Vi terms (see Supplementary Methods 2, 3). The analytical expressions are crucial for the calculation of 2QSS and gate fidelities, explained in the rest of this paper. Finally, the full two-qubit Hamiltonian in the computational basis is
Because capacitive coupling arises from the overlap of qubit wavefunctions, by increasing the barrier between QD 3 and 4, the exponential “tail” of the wavefunctions can be arbitrarily reduced, thereby turning off the interaction. Thus, energy shifts from the presence of the other qubit (equivalent to a redefinition of detunings) does not affect 1QSS and single-qubit gates. This redefinition shifts the entire charge boundary diagram, and hence 1QSS (Fig. 1c) by an approximately constant amount, Δε = 0.54 meV, Δεm = 0.21 meV, for parameters used in our study.
The ℏVi terms in Eq. (6) contain all pairwise inter-dot Coulomb energies between the two TQDs, weighted by the charge admixtures. The latter is key in modeling the effect of charge noise, which has been measured to be 1/f-like over a wide range of frequencies3,32,43,44.
Charge noise
We introduce noise by simulating random fluctuations in tunneling and detuning45,46. These fluctuations perturb charge admixtures, leading to noisy two-qubit interaction. At this point, we write qubit parameters in vectorized form n = (tlA, trA, εA, εmA, tlB, trB, εB, εmB) for notational simplicity, where the first (last) four components belong to qubit A (B). Noisy parameters, denoted with a tilde, is the sum of the noiseless parameter with a random time-dependent fluctuation, \({\tilde{n}}_{i}(t)={n}_{i}+\delta {n}_{i}(t)\). We assume uncorrelated noise and each random time series is generated independently in simulations. To avoid confusion, symbol t with or without numeral subscripts indicates time, while tl/r,A/B indicate left/right tunnel couplings for qubits A/B. It should be clear from the context which is being referred to. Random variables are characterized by the time correlation function \({C}_{{n}_{i}}({t}_{1}-{t}_{2})=\langle \delta {n}_{i}({t}_{1})\delta {n}_{i}({t}_{2})\rangle\), where angular brackets 〈 . 〉 denote average over noise realizations. The corresponding (two-sided) power spectral density is the Fourier transform of the time correlation function, \({S}_{{n}_{i}}(\omega )=\mathop{\int}\nolimits_{-\infty }^{\infty }{C}_{{n}_{i}}(t){{\rm{e}}}^{-{\rm{i}}\omega t}dt\). Adapting the algorithms of refs. 47,48, each noisy parameter δni(t) is simulated with a 1/f power spectral density with a low-frequency roll-off,
where ωl (ωh) is the lower (higher) cutoff frequency. \({{{\Delta }}}_{{n}_{i}}^{2}\) is related to the noise variance \({\sigma }_{{n}_{i}}^{2}\) by \({{{\Delta }}}_{{n}_{i}}^{2}={\sigma }_{{n}_{i}}^{2}\frac{1}{2}{\left(1+{\mathrm{ln}}\,({\omega }_{{\rm{h}}}/{\omega }_{{\rm{l}}})\right)}^{-1}\) (see Supplementary Note 2). Although spectroscopy experiments3,43,44, which are limited by acquisition time, have not observed low-frequency saturation in 1/f noise, we model the roll-off to avoid unphysical, infinite noise power at f = 0 (See Supplementary Discussion 1).
Because our objective is to study fidelities and sweet spots of two-qubit gates under noise, and 1QSS have already been found, we assume noisy two-qubit interactions and ideal (noiseless) single-qubit operations for all calculations.
Non-local gate time
CPHASE and CNOT gates are given by unitary evolution operators
Using Mahklin invariants49, we find the non-local interaction time required for these gates to be identical,
for any odd positive integer k (see Supplementary Note 3). While non-local gating has been studied in the literature30,31,36,50,51, the exact gate sequence (including local gates) for capacitively coupled EO qubits has not been reported, to our knowledge. We show the exact sequence and timings in Fig. 2a. Importantly, it is the energy difference in the denominator (V1 + V4) − (V2 + V3), that is important for capacitive gating. This difference is dominated by Coulomb interactions between electrons in doubly-occupied charge admixtures of qubits A and B, which have a center of mass situated away from the middle dot (unlike the dominant (1,1,1) configuration), giving rise to a net electric dipole moment. The energy difference can be qualitatively understood as a dipole–dipole interaction between the two TQDs. This is what gives rise to the dependence on TQD parameters for the non-local gate time.
a Exact gate sequences and timings for CPHASE (red dashed box) and CNOT (blue dashed box). Effective single-qubit Hamiltonians (Eqs. (2), (3)) generate unitaries for qubit A/B, \({U}_{{\rm{A/B}}}(x,t)\equiv \exp ({\rm{i}}{\hat{\sigma }}_{x}{g}_{{\rm{A/B}}}t/2)\) and \({U}_{{\rm{A/B}}}(z,t)\equiv \exp ({\rm{i}}{\hat{\sigma }}_{z}{\omega }_{{\rm{A/B}}}t/2)\). The non-local unitary is given by Eq. (11) without noise. The non-local gate time t0 is identical for CPHASE and CNOT, where k is an odd positive integer (Eq. (10)). b Color plot of gate times for equal tunneling tlA = trA, with two-qubit sweet spots (2QSS) indicated for εmA (white), tlA (red), and trA (orange) with dashed lines. c Linecuts of εmA 2QSS. Fastest gate times are at the top corner and increase down the εmA 2QSS line. Fastest (k = 1) AEON and RX gate times are 450 and 64 ns, respectively. At the intersection with tlA 2QSS, gate time is 13.6 μs. d Linecuts of tlA and trA 2QSS. Gate times go to infinity at the point where the two tunneling 2QSS intersect. Panels (e–g) repeat panels (b–d), but with tunneling \(\arctan ({t}_{{\rm{lA}}}/{t}_{{\rm{rA}}})=5{7}^{\circ }\), chosen such that the εm 2QSS is along εA = 0, which is the 1QSS, and which the operating points of AEON and RX lie on. As before, gate times increase as εmA decreases, and goes to infinity at the tlA, trA double 2QSS.
Color plots of gate time t0 in detuning space for qubit A are shown, for equal tunneling ratios where \(\arctan ({t}_{{\rm{lA}}}/{t}_{{\rm{rA}}})=4{5}^{\circ }\) (Fig. 2b) and tunneling ratios given by \(\arctan ({t}_{{\rm{lA}}}/{t}_{{\rm{rA}}})=5{7}^{\circ }\) (Fig. 2e). The equivalent color plot for qubit B (not shown) is a mirror reflection about the ε = 0 line for qubit A, because of our choice of parameters εB = −εA and tlA/B = trB/A. Gate times are faster near the boundaries of (1,1,1) with (2,0,1) and (1,0,2) charge occupations. This can be understood as a stronger capacitive interaction arising from a larger mean dipole moment of each TQD as a result of proportionately larger charge admixtures. Comparatively, sitting near (1,2,0) or (0,2,1) boundaries gives rise to a smaller net TQD dipole moment and thus a significantly longer gate time. In addition, for qubit A, gate times decrease faster as one goes from the central (1,1,1) region toward the (1,0,2) boundary, compared to moving toward the (2,0,1) boundary. This is because of the stronger dipole–dipole interaction arising from proximity of the doubly occupied (1,0,2) state of qubit A with B. The converse is true for qubit B, i.e., gate times decrease faster moving from the central region toward the (2,0,1) boundary, compared to the (1,0,2) boundary.
The AEON works at the \(\varepsilon =0,{\varepsilon }_{{\rm{m}}}={U}^{^{\prime\prime} }-{U}^{\prime}=-0.9\) meV double 1QSS31, and is independent of tunnel coupling. The RX operates within the upper triangular region (Fig. 1c)35,37. We take the RX operating point to be at ε = 0 (which is a 1QSS for symmetric tunnel coupling), and εm = −0.57 meV. Asymmetric tunnel couplings shift the RX ε SS. We assume tunnel couplings are tunable; they can be tuned to the desired ratio, if necessary, during non-local gating and back to equal tunnel coupling (for RX SS) during single-qubit operations. Consequently, the fastest (k = 1) non-local gate times for RX and AEON are 64 and 450 ns, respectively, for numerical parameters used. The choice of εm for RX is slightly arbitrary; it is possible for the RX gate time to be faster with larger εm, thereby moving the operating point closer to the doubly occupied regime while remaining in the (1,1,1) configuration. The trade-off is greater susceptibility to charge noise.
Two-qubit gate fidelity
Noisy two-qubit evolution given by
can be decomposed into ideal and noisy evolution,
We use the two-qubit gate fidelity52, \({\mathcal{F}}=\frac{1}{{d}^{2}}| \,\text{Tr}\,({U}^{\dagger }{\tilde{U}}){| }^{2}\), where d is dimensionality, to evaluate the effect of charge noise. We compute the gate fidelity for exact CPHASE and CNOT gate sequences (Fig. 2a), averaged over noisy two-qubit interactions. Since CPHASE and CNOT gates share the same non-local interaction, the fidelity expression for both are identical. The average gate fidelity53 is
This formula is used for all our numerical simulations. We note that this formula is identical to process fidelity54; the averaging over noise realizations done in our numerical simulations and analytical calculations correspond to the measurement protocols performed in quantum process tomography experiments (see Supplementary Note 4).
Analytical fidelity formula
Next, we derive an approximate analytical expression for average gate fidelity. Assuming stationary, Gaussian noise with zero mean, and making use of the series expansion to linear order, \(\delta {V}_{i}={\sum }_{j}\frac{\partial {V}_{i}}{\partial {n}_{j}}\delta {n}_{j}\), we perform a cumulant expansion55,56 of Eq. (13) to obtain an analytical expression for average gate fidelity,
The derivation is detailed in Supplementary Note 5. Here \(\varsigma ({t}_{0})=\mathop{\int}\nolimits_{0}^{{t}_{0}}{\rm{d}}t^{\prime} \mathop{\int}\nolimits_{0}^{t^{\prime} }{\rm{d}}t^{\prime\prime} \overline{C}(t^{\prime\prime} )\) is the double integral of the noise correlation function, normalized to \(\overline{C}(0)=1\), and \({\sigma }_{{n}_{i{\rm{A/B}}}}\) is the noise standard deviation in first/last four n components for qubit A/B. The terms FA, FB, ξ, ν comprise linear combinations of Coulomb integrals and are detailed in Supplementary Method 3. The term \({C}_{11}\equiv \mathop{\sum }\nolimits_{i = 1}^{3}\mathop{\sum }\nolimits_{j = 1}^{3}{{\mathcal{V}}}_{ij}\) comprises all possible pairwise Coulomb energies between electrons of qubits A and B in the (1, 1, 1)A − (1, 1, 1)B configuration. The function ς(t0) is general; it can be obtained from any noise power spectrum. In this study, ς(t0) is calculated from the 1/f power spectrum in Eq. (8). The exact expression is given by Supplementary Eq. (101) and its derivation shown in Supplementary Note 2.
Two-qubit sweet spots (2QSS)
Simplification of the noise terms of Eq. (14) yields insights into the existence of 2QSS. A 2QSS is defined to be a point in parameter space for which all partial derivatives, ∂Vi/∂nj = 0, for a particular parameter nj. At these points, each qubit is protected from noise in parameter nj. First, interaction terms Vi for i = 2, 3, 4, contain charge admixtures through the \(|{1}_{{\rm{A/B}}}^{\prime}\rangle\) state; these admixtures depend on TQD parameters which couple to charge noise. This means δV1 = 0 because the \(\left|{0}_{{\rm{A}}}{0}_{{\rm{B}}}\right\rangle\) state does not contain admixtures. Second, \(\left|{0}_{{\rm{A}}}{1}_{{\rm{B}}}^{\prime}\right\rangle\) and \(\left|{1}_{{\rm{A}}}^{\prime}{0}_{{\rm{B}}}\right\rangle\) states contain admixtures in qubits B and A, respectively, implying that δV2 and δV3 are only dependent on noise in the respective qubits. Explicitly evaluating the expansions \(\delta {V}_{2}\approx {\sum }_{j}\frac{\partial {V}_{2}}{\partial {n}_{j}}\delta {n}_{j}=\frac{\partial {V}_{2}}{\partial {\varepsilon }_{{\rm{B}}}}\delta {\varepsilon }_{{\rm{B}}}+\frac{\partial {V}_{2}}{\partial {\varepsilon }_{{\rm{mB}}}}\delta {\varepsilon }_{{\rm{mB}}}+\frac{\partial {V}_{2}}{\partial {t}_{{\rm{lB}}}}\delta {t}_{{\rm{lB}}}+\frac{\partial {V}_{2}}{\partial {t}_{{\rm{rB}}}}\delta {t}_{{\rm{rB}}}\), and \(\delta {V}_{3}\approx {\sum }_{j}\frac{\partial {V}_{3}}{\partial {n}_{j}}\delta {n}_{j}=\frac{\partial {V}_{3}}{\partial {\varepsilon }_{{\rm{A}}}}\delta {\varepsilon }_{{\rm{A}}}+\frac{\partial {V}_{3}}{\partial {\varepsilon }_{{\rm{mA}}}}\delta {\varepsilon }_{{\rm{mA}}}+\frac{\partial {V}_{3}}{\partial {t}_{{\rm{lA}}}}\delta {t}_{{\rm{lA}}}+\frac{\partial {V}_{3}}{\partial {t}_{{\rm{rA}}}}\delta {t}_{{\rm{rA}}}\), we indeed find that noise in qubit B (A) affects only δV2(δV3). In truncating the series expansions to terms linear in fluctuating parameters, we have assumed the weak noise limit. In addition, we keep only leading order terms within the partial derivatives in the perturbative limit. As a result, δV4 ≈ δV2 + δV3. These approximations allow us to separate the contributions of noise in the two qubits. Explicit forms of the derivatives are provided in Supplementary Note 5.
The locus of 2QSS is shown as dashed lines in detuning space of qubit A in Fig. 2b, e. As described in the preceding section, equivalent color plots for qubit B are reflections about the ε = 0 line, and the discussion about qubit A here also applies to qubit B. The εmA 2QSS for qubit A is indicated as the white dashed line in Fig. 2b, e. The angle of the εmA/B 2QSS line depends on tunnel coupling ratio, and equations of the lines are
Here, C11, C51, C21, C13, and C14 comprise all pairwise Coulomb energies between electrons of the TQDs for (1, 1, 1)A − (1, 1, 1)B, (0, 2, 1)A − (1, 1, 1)B, (1, 0, 2)A − (1, 1, 1)B, (1, 1, 1)A − (2, 0, 1)B, and (1, 1, 1)A − (1, 2, 0)B configurations, respectively.
Left and right tunneling 2QSS are lines close to and parallel to the (1,2,0) and (0,2,1) to (1,1,1) detuning boundaries, respectively. Working at these tunneling 2QSS require non-local gate times of the order 10−100 μs in general, so the protection from tunneling noise has to be weighed against decoherence from long gate times. Linecuts along tunneling 2QSS are shown in Fig. 2d, g. At the intersection of left and right tunneling 2QSS lines, the conditions imposed by Makhlin invariants for non-local gates are not satisfied and Eq. (10) gives non-physical infinite gate time. It is therefore not possible to take advantage of the double tunneling 2QSS. Equations of lines corresponding to tunneling 2QSS are
The εmA/B and tlA/B double 2QSS conditions for the qubits are given by the solution to the relevant pairs of simultaneous equations (Eqs. (15), (17) and Eqs. (16), (19)). There is no ε 2QSS in the linear QD geometry. The full derivation of the 2QSS equations is given in Supplementary Note 6.
Infidelity results
Numerical simulations of Eq. (13) with noisy parameters are averaged to give infidelity \(1-\left\langle {\mathcal{F}}\right\rangle\), and compared with that from analytics, \(1-\left\langle {{\mathcal{F}}}_{{\rm{an}}}\right\rangle\). Results are plotted in Fig. 3 for noise affecting the non-local gate for qubit A only. The reason is that results for noisy qubit B or both qubits noisy are qualitatively similar and the analytic fidelity acquires a simple expression, \(\langle {{\mathcal{F}}}_{{\rm{an}}}\rangle ={\langle {{\mathcal{F}}}_{{\rm{an}}}\rangle }_{{\rm{A}}}\times {\langle {{\mathcal{F}}}_{{\rm{an}}}\rangle }_{{\rm{B}}}\) (see Supplementary Discussion 2).
a–h Infidelity plots of AEON with qubit A in the presence of only detuning noise (a–d) and only tunneling noise (e–h), while sitting at its single-qubit double sweet spot and the εm 2QSS. i–p Infidelity plots of RX (k = 7, for a comparable gate time with AEON) with qubit A in the presence of only detuning noise (i–l) and only tunneling noise (m–p), while sitting at its single-qubit single sweet spot and the εm 2QSS. q–x Infidelity plots with qubit A in the presence of only detuning noise (q–t) and only tunneling noise (u–x), while sitting at the εm and tl 2QSS. Panels (a, e, i, m, q, u) are numerical simulations (Eq. (13)) averaged over 500 (a, e, i, m) and 100 (q, u) noise realizations. Panels (b, f, j, n, r, v) are analytical calculations (Eq. (14)) and agree well with numerical simulations, as evident from comparisons with linecuts. Corresponding analytical and numerical plots share the same color scale. Panels (c, k, s) show horizontal linecuts (circles), and panels (d, l, t) show vertical linecuts (squares) from the numerical result in panels (a, i, q), and agree very well with analytical calculations (lines) at the εm 2QSS, while analytical infidelity overestimates by an order of magnitude for the εm and tl double 2QSS. Panels (d, l, t) show that infidelity is independent of middle detuning noise \({\sigma }_{{\varepsilon }_{{\rm{mA}}}}\) which confirms the εmA 2QSS. Panel (w) shows that infidelity is also independent of the left tunneling noise \({\sigma }_{{t}_{{\rm{lA}}}}\) which confirms that it is the double 2QSS of εmA and tlA. In contrast, infidelity increases with noise detuning \({\sigma }_{{\varepsilon }_{{\rm{A}}}}\) (panels c, k, s) because there is no such 2QSS, and in right tunneling \({\sigma }_{{t}_{{\rm{rA}}}}\) when not operated at the trA 2QSS (panels h, p, x). Color scales in rightmost column represent the numerical value of noise amplitude at which the linecuts are taken. Results for noisy qubit B or both qubits noisy are qualitatively similar (see Supplementary Discussion 2).
Infidelity results are shown in Fig. 3, which we refer to in the rest of this section. Numerical simulations are calculated by averaging over 500 noise realizations for every point in detuning space, except at double tl and εm 2QSS which are averaged over 100 realizations. The reason is the much longer gate times (up to ~100 μs) at those points result in impractical runtimes. Infidelities from numerical simulations are shown in the leftmost column (Fig. 3a, e, i, m, q, u), analytical infidelity (Eq. (14)) in the second column (Fig. 3b, f, j, n, r, v). Each pair of infidelity color plots have the same scale to facilitate comparison.
Horizontal linecuts (circles) from numerical infidelity results are plotted with analytical infidelity (lines) in the third column (Fig. 3c, g, k, o, s, w). Similarly, vertical linecuts (squares) are plotted in the rightmost column (Fig. 3d, h, l, p, t, x). Color scales for linecuts indicate the standard deviation of the noisy parameter at which the linecut was taken. All plots display good agreement between numerical and analytical calculations, except at εm and tl double 2QSS where t0 increases significantly and the analytical formula over-predicts infidelity.
We analyze infidelity due to noise in detuning vs tunneling parameters separately because the contribution to infidelity depends on noise variance as well as the first derivative of the squares of charge admixtures. The latter yields terms that are smaller by a factor of ~t/(U + ε) for detuning derivatives compared to tunneling derivatives (see Supplementary Eqs. (134, 135), Supplementary Note 5). When comparing infidelities from only detuning noise with that from only tunneling noise at the same working point, e.g., between panels (a, b) and (e, f), or between panels (i, j) and (m, n) of Fig. 3, it is clear that infidelity is less sensitive to noise in detuning than tunneling.
Now, we examine the case when the RX and AEON qubits are operated at εm 2QSS and ε 1QSS. When \(\arctan ({t}_{{\rm{lA}}}/{t}_{{\rm{rA}}})=5{7}^{\circ }\), the εmA 2QSS lies on εA = 0 1QSS. Vertical linecuts across \({\sigma }_{{\varepsilon }_{{\rm{mA}}}}\) (panels d, l) show excellent agreement between analytical and numerical calculations. In order to fairly compare RX and AEON infidelities at these points, we chose k (Eq. (10)) such that they have comparable gate times of 450 ns (k = 1, AEON) and 448 ns (k = 7, RX). For comparable gate times, it is favorable to work at the AEON 1QSS, suggesting that while the RX operates faster due to a greater dipole–dipole interaction, it is more susceptible to charge noise. However, with the fastest gate time (k = 1) of 64 ns for RX, a slightly better fidelity (Fig. 4b, d, f, h) is achieved, demonstrating the natural relationship between fast gates and improved fidelity.
Left column (panels a, c, e, g) are identical with panels (c, d, g, h) of Fig. 3. Right column (panels b, d, f, h) are similar to panels (k, l, o, p) of Fig. 3, except that they are calculated for k = 1. Comparing each row, it is clear that the RX performs slightly better than the AEON, as expected for a faster qubit.
Next, when the εmA 2QSS line is slanted, e.g., for \(\arctan ({t}_{{\rm{lA}}}/{t}_{{\rm{rA}}})=4{5}^{\circ }\), it intersects the tlA 2QSS. At this double 2QSS, where gate time is longer than when operating on RX or AEON 1QSS, vertical linecuts along \({\sigma }_{{\varepsilon }_{{\rm{mA}}}}\) (Fig. 3t) and horizontal linecuts along \({\sigma }_{{t}_{{\rm{lA}}}}\) (Fig. 3w) display constant infidelities, demonstrating the double 2QSS character of the working point. However, the analytical formula over-predicts infidelity compared with numerical simulations, as shown in Fig. 3s, t, w, x.
Finally, there is no εA 2QSS. As expected, linecuts (Fig. 3c, g, h, k, o, p) show rising infidelity with greater \({\sigma }_{{\varepsilon }_{{\rm{A}}}}\), and excellent analytical and numerical agreement.
Discussion
Here, we describe optimal choices of 2QSS working points, all of which fall on the εm 2QSS. First, if it is desired that qubits are protected from noise during both single- and two-qubit operation with minimal experimental control, then it is best to work on the intersection of εm 2QSS and ε 1QSS. This requires tunnel coupling ratios to be tuned to \(\arctan ({t}_{{\rm{lA}}}/{t}_{{\rm{rA}}})=5{7}^{\circ }\) during non-local operations. At this ratio, the εmA 2QSS is a vertical line passing through AEON and RX ε 1QSS. During single-qubit gates, in order to return to the RX 1QSS, tunnel couplings must be re-equalized. The AEON does not require retuning since its 1QSS is independent of tunneling.
Further optimization for RX can be done. Because tunneling asymmetry shifts its ε 1QSS, this can be made to coincide with the εm 2QSS for one particular tunneling ratio, \(\arctan ({t}_{{\rm{l}}}/{t}_{{\rm{r}}})=37.{7}^{\circ }\) for the parameters used. This is presented in Fig. 5, where panel (a) plots 1QSS and 2QSS against tunneling ratio, and panel (b) illustrates where they coincide on a color plot of non-local gate time. Left of the midline, gate time is longer, t0 = 198 ns.
Next, even when these advantages cannot be exploited due to say, limited tunability of tunnel coupling, the intersection of εm 2QSS line with one of the tunneling 2QSS provides another avenue for fidelity improvement. This intersection between εm and tl 2QSS is shown by the white circle at the lower left of Fig. 2b, e. Comparing infidelity plots in Fig. 3, the best fidelities are found when working at the εm and tl double 2QSS. The experimental complication to working at this point is the movement to and from the 1QSS, during single-qubit gates.
The conditions for the existence of both tl and tr 2QSS are equivalent to the requirement for the qubit to remain in the (1,1,1) region, \(-(U-{U}^{\prime})\,<\) (\({\varepsilon }_{{\rm{mA}}}+{U}^{\prime}-{U}^{^{\prime\prime} }\)) \(\pm {\varepsilon}_{{\rm{A}}}\,<\,{U}-{U}^{\prime}\). The conditions for εmA and εmB 2QSS to exist are sgn(C51 − C11) = sgn(C21 − C11) and sgn(C13 − C11) = sgn(C14 − C11), respectively. These conditions are automatically satisfied in a linear QD array. The full derivation is given in Supplementary Note 6.
Having studied fidelities of specific working points on 2QSS, it is reasonable to ask if a global fidelity optimum might exist. In Fig. 6, when there is only detuning noise in qubit A (panels a, c, d), the global fidelity optimum is a single point lying on εmA 2QSS, in the lower half of the (1,1,1) charge region. Analytical calculations show infidelity ≈ 10−10; numerical calculations give infidelity ≈10−6. Both meet fault-tolerance thresholds, \(1-{\mathcal{F}}\,<\,1{0}^{-4}\) 57,58 and 10−6 59. This is significant because when tunneling noise is negligible, working at this global optimum will achieve fault-tolerance.
a The red curve shows the exact dependence of RX ε 1QSS on \(\arctan ({t}_{{\rm{l}}}/{t}_{{\rm{r}}})\). The blue line, from ref. 36, shows the approximate dependence, ε ≈ −(8Δ/5)y, where \({{\Delta }}=U-2U^{\prime} +U^{\prime\prime} -{\varepsilon }_{{\rm{m}}}\) and small tunneling asymmetry \(y=\sin ({\rm{\pi}}/4-\arctan (t_{\rm{l}}/t_{\rm{r}}))\). The purple curve shows the εm 2QSS position as a function of \(\arctan ({t}_{{\rm{l}}}/{t}_{{\rm{r}}})\). At the intersection where both 1QSS and 2QSS share the same tunneling ratio, ε = −0.15 meV, \(\arctan ({t}_{{\rm{l}}}/{t}_{{\rm{r}}})=37.{7}^{\circ }\), for parameters used in this study. b The gate times at the tunneling ratio \(\arctan ({t}_{{\rm{l}}}/{t}_{{\rm{r}}})=37.{7}^{\circ }\). At the intersection of εm 2QSS (white dashed line) and RX 1QSS, non-local gate time is t0 = 198 ns.
There is only detuning noise, \({\sigma }_{{\varepsilon }_{{\rm{mA}}}}={\sigma }_{{\varepsilon }_{{\rm{A}}}}=1{0}^{-4}\,{\rm{meV}}\) for (a, c, d), and only tunneling noise, \({\sigma }_{{t}_{{\rm{lA}}}}={\sigma }_{{t}_{{\rm{rA}}}}=1{0}^{-5}\,{\rm{meV}}\) for (b, e). Tunneling parameters are tlA = trA in panels (a, b, c), and \(\arctan ({t}_{{\rm{lA}}}/{t}_{{\rm{rA}}})=5{7}^{\circ }\) in panels (d, e). a The global optimum when there is only detuning noise lies along the εm 2QSS. This global optimum is in a region of large εm for tunneling noise. The global optimum lies at a point which has extremely small gate times that require timing precision of ~ps or better, which may be currently out of reach experimentally. b When there is only tunneling noise, the global optimum lies in the region near the upper right boundary of the (1,1,1) region. The optimal point in panel (a) is now a point with significantly larger infidelity (\(1-\langle {{\mathcal{F}}}_{{\rm{an}}}\rangle \approx 1{0}^{-2}\)). c Infidelity linecut along the εm 2QSS. The analytical (line) and numerically simulated (points) infidelities agree well, although they start to deviate past the global optimum. Global infidelity optimum is better than 10−10 from analytical calculations, and 10−6 from numerical simulations. d With only detuning noise, and tuning tunneling parameters so that the εm 2QSS is along ε = 0, the global optimum still lies on the εm 2QSS. However, the gate times become very large near bottom corner of the (1,1,1) region (see Fig. 2) and becomes impractical to implement. e With only tunneling noise and the εm 2QSS is along ε = 0, the infidelity again rises significantly at the region where it was the global optimum in panel (d) when there was only detuning noise. In reality, there should be noise in both detuning and tunneling, and infidelities are approximately additive, demonstrating the difficulty of finding a truly global optimal working point.
However, when there is only tunneling noise, the global fidelity optimum is located in the upper right quadrant of the (1,1,1) region (panels b, e), and infidelity in the lower half of the (1,1,1) region increases significantly. Because we expect both detuning and tunneling noise to affect EO qubits, and infidelity is approximately additive, the optimum point for global fidelity from detuning noise may be limited by infidelity from tunneling noise.
Above, we analyzed results when qubit A is noisy. Similar results apply when qubit B or both qubits are noisy. We also assumed noiseless single-qubit gates. Next, we discuss fidelity optimization with noisy single-qubit gates.
CPHASE involves an additional z-rotation for each qubit. At simultaneous 1QSS and 2QSS, z-rotations times are t1 = t2 ≈ 1 ns (AEON) and 0.4 ns (RX) for ℏωA/B ≈ 1 meV. Both single-qubit z-gates are 2 orders of magnitude faster than the non-local gate. Therefore, at these sweet spot intersections, it is likely that the non-local gate limits fidelity.
As discussed, the global minimum need not lie on SS intersections, and is dependent on the dominant noise parameter. This necessitates a complete understanding of the noise power of each parameter. In addition, noise may be correlated. However, noise spectroscopy may not be trivial to implement since noise acts on multiple axes in these qubits, although theoretical progress in multiaxis noise spectroscopy had been made53,60. Fortunately, the same parameter space governs single and two-qubit gates; perhaps a simple formula might relate single and two-qubit fidelities.
CNOT requires single-qubit x- and z-rotations. Because pulse gating for AEON rotates the qubit around the −(x + z) axis, single-qubit rotations might benefit from optimal control pulses61. On the other hand, RX uses microwave control and can directly perform x-rotations, the speed of which depends on drive amplitude. Because AEON and RX can transform into each other, they should be able to take advantage of the features each one offers for further optimization.
In summary, we studied capacitive two-qubit CPHASE and CNOT gates for EO qubits with a focus on AEON and RX proposals. We demonstrated the existence of εm, tl, and tr 2QSS for each qubit, and provided conditions for their existence. We showed how the εm 2QSS can be tuned to intersect with ε 1QSS, requiring only tuning of tunnel coupling ratios. This has the benefit of operating the qubit at both 1QSS and 2QSS. We also showed that double 2QSS also exist—εmA with tlA (qubit A) or εmB with trB (qubit B)—providing another avenue for fidelity improvements. Importantly, the global fidelity optimum lies along the εm 2QSS, with a fidelity better than the fault-tolerance threshold when tunneling noise is negligible.
Our infidelity results illustrate the stringent requirement for qubits. Best fidelities are obtained when working at the double εmA and tlA 2QSS. However, only with extremely low noise, e.g., \({\sigma }_{{\varepsilon }_{{\rm{A}}}}<1{0}^{-5}\) meV or \({\sigma }_{{t}_{{\rm{rA}}}}<1{0}^{-5}\) meV, can the fault-tolerance conditions be met. The fidelities in our study were computed for noisy non-local gate and noiseless single-qubit gates. In reality, because both qubits will be noisy and single-qubit gates will similarly be afflicted, the requirements are likely to be even stricter.
Given recent experimental progress in scaling up of QD arrays and capacitive coupling, our results should contribute toward the realization of high fidelity two-qubit gates.
Methods
Numerical simulations
We numerically calculate the average fidelity (Eq. (13)) of the non-local two-qubit gate by averaging over 500 different simulations of noise for each noisy parameter \({\tilde{n}}_{i}\), except at double tl and εm 2QSS points which are averaged over 100 realizations. Each noisy time series δni(t) is simulated with the desired spectrum of Eq. (8) from the algorithm of refs. 47,48, which generates for every positive ωk value, two Gaussian distributed random numbers to represent the real and imaginary parts of the spectrum. After scaling by \(\sqrt{S({\omega }_{k})/2}\), an inverse FFT produces the desired noisy time series. Our modification consists of shifting the mean of the generated time series to zero and then rescaling its variance to the desired value (see Supplementary Method 4). At each time step, the charge admixtures αi, βi, and the interaction terms \({\tilde{V}}_{i}\) are computed, and the full unitary evolution with the exact gate sequence is calculated. All simulations in Figs. 3 and 4 are performed with cutoff frequencies, ωl/2π = 66.7 kHz, ωh/2π = 50 GHz.
Triple quantum dot potential and parameters
The Hubbard model describes both intra-TQD and inter-TQD interactions. Intra-TQD interactions comprise QD detunings, tunnel couplings as well as intra and inter-dot Coulomb energies. Inter-TQD interaction comprise inter-dot Coulomb energies only, when tunnel coupling between the TQDs (QD 3 and 4) is zero. Parameters of inter-TQD interactions are calculated from a model confinement potential and intra-TQD parameters from estimates in literature. See Supplementary Note 7 for a discussion of this approach.
The TQD potential is modeled as a 2D tri-quadratic potential, \({V}_{\text{pot}}({\boldsymbol{r}})=\min [{v}_{\text{pot},1}({\boldsymbol{r}}),\ {v}_{\text{pot},2}({\boldsymbol{r}}),{v}_{\text{pot},3}({\boldsymbol{r}})]\), where the i-th QD well at position Ri is \({v}_{\text{pot},i}({\boldsymbol{r}})=\frac{1}{2}m{\omega }_{0}^{2}(| {\boldsymbol{x}}-{{\boldsymbol{R}}}_{i}{| }^{2}+{{\boldsymbol{y}}}^{2})+{\varepsilon }_{i}\), whose eigenfunctions are the 2D Fock-Darwin wavefunctions62. The 2D character of the potential is a good approximation to electrostatically gated QDs, given the tight confinement in the z-direction. The confinement \(m{\omega }_{0}=\hslash /{a}_{{\rm{B}}}^{2}\), where aB is the Bohr radius. Treating neighboring potential wells as perturbations, dot-centered, normalized single-electron wavefunctions ψi of the TQD potential are constructed from the Fock-Darwin wavefunctions using the method of Löwdin Orthogonalization63,64, from which the three-electron wavefunctions are formulated. Numerical values take reference from refs. 20,39: a = 50 nm, aB = 25 nm; R = 160 nm; Ui = U = 2.8 meV; \({U}_{12}={U}_{23}={U}_{45}={U}_{56}={U}^{\prime}=1.8\) meV; U13 = U46 = U″ = 0.9 meV. For both AEON and RX, tlA = tlB = 0.12 meV, εA = εB = 0. For AEON, εmA = εmB = −0.9 meV. For RX, εmA = εmB = −0.57 meV. Direct Coulomb integrals in the capacitive interaction are \({{\mathcal{V}}}_{ij}=({q}^{2}/4{\rm{\pi}}{\epsilon }_{{\rm{r}}}{\epsilon }_{0})\int \int | {\psi }_{i}({{\boldsymbol{r}}}_{1}){| }^{2}\frac{1}{| {{\boldsymbol{r}}}_{1}-{{\boldsymbol{r}}}_{2}| }| {\psi }_{j}({{\boldsymbol{r}}}_{2}){| }^{2}d{{\boldsymbol{r}}}_{1}d{{\boldsymbol{r}}}_{2}\), where we take silicon relative permittivity, ϵr = 11.68. Even though the exact form of QD confinement potential depends on the device, an advantage of modeling the TQD potential as tri-quadratic is that each integral is analytically tractable. With these parameters, a check shows that direct Coulomb integrals are a factor of 104 greater than the spin-dependent exchange Coulomb integrals (see Supplementary Discussion 3), validating our assumption of capacitive non-local gating.
Data availability
The data that support the findings of this study are available at https://doi.org/10.21979/N9/TYUUVS.
Code availability
The computer code used in generating the data are available from the corresponding author on reasonable request.
Change history
09 September 2021
A Correction to this paper has been published: https://doi.org/10.1038/s41534-021-00475-2
19 August 2021
A Correction to this paper has been published: https://doi.org/10.1038/s41534-021-00467-2
References
Loss, D. & DiVincenzo, D. P. Quantum computation with quantum dots. Phys. Rev. A 57, 120–126 (1998).
Zwanenburg, F. A. et al. Silicon quantum electronics. Rev. Mod. Phys. 85, 961–1019 (2013).
Yoneda, J. et al. A quantum-dot spin qubit with coherence limited by charge noise and fidelity higher than 99.9%. Nat. Nanotechnol. 13, 102–106 (2018).
Zajac, D. M. et al. Resonantly driven CNOT gate for electron spins. Science 359, 439–442 (2018).
Foletti, S., Bluhm, H., Mahalu, D., Umansky, V. & Yacoby, A. Universal quantum control of two-electron spin quantum bits using dynamic nuclear polarization. Nat. Phys. 5, 903–908 (2009).
Bluhm, H. et al. Dephasing time of GaAs electron-spin qubits coupled to a nuclear bath exceeding 200 μs. Nat. Phys. 7, 109–113 (2011).
Kim, D. et al. Quantum control and process tomography of a semiconductor quantum dot hybrid qubit. Nature 511, 70–74 (2014).
Kim, D. et al. High-fidelity resonant gating of a silicon-based quantum dot hybrid qubit. npj Quantum Inf. 1, 15004 (2015).
Thorgrimsson, B. et al. Extending the coherence of a quantum dot hybrid qubit. npj Quantum Inf. 3, 32 (2017).
Cerfontaine, P. et al. Closed-loop control of a GaAs-based singlet-triplet spin qubit with 99.5% gate fidelity and low leakage. Nat. Commun. 11, 4144 (2020).
Schröer, D. et al. Electrostatically defined serial triple quantum dot charged with few electrons. Phys. Rev. B 76, 075306 (2007).
Laird, E. A. et al. Coherent spin manipulation in an exchange-only qubit. Phys. Rev. B 82, 075403 (2010).
Gaudreau, L. et al. Coherent control of three-spin states in a triple quantum dot. Nat. Phys. 8, 54–58 (2012).
DiVincenzo, D. P., Bacon, D., Kempe, J., Burkard, G. & Whaley, K. B. Universal quantum computation with the exchange interaction. Nature 408, 339–342 (2000).
Shi, Z. et al. Fast hybrid silicon double-quantum-dot qubit. Phys. Rev. Lett. 108, 140503 (2012).
Koh, T. S., Gamble, J. K., Friesen, M., Eriksson, M. A. & Coppersmith, S. N. Pulse-gated quantum-dot hybrid qubit. Phys. Rev. Lett. 109, 250503 (2012).
Russ, M. & Burkard, G. Three-electron spin qubits. J. Phys. Condens. Matter 29, 393001 (2017).
Srinivasa, V. & Taylor, J. M. Capacitively coupled singlet-triplet qubits in the double charge resonant regime. Phys. Rev. B 92, 235301 (2015).
Calderon-Vargas, F. A. & Kestner, J. P. Directly accessible entangling gates for capacitively coupled singlet-triplet qubits. Phys. Rev. B 91, 035301 (2015).
Neyens, S. F. et al. Measurements of capacitive coupling within a quadruple-quantum-dot array. Phys. Rev. Appl. 12, 064049 (2019).
MacQuarrie, E. R. et al. Progress toward a capacitively mediated CNOT between two charge qubits in Si/SiGe. npj Quantum Inf. 6, 81 (2020).
Fujita, T., Baart, T. A., Reichl, C., Wegscheider, W. & Vandersypen, L. M. Coherent shuttle of electron-spin states. npj Quantum Inf. 3, 22 (2017).
Feng, M., Kwong, C. J., Koh, T. S. & Kwek, L. C. Coherent transfer of singlet-triplet qubit states in an architecture of triple quantum dots. Phys. Rev. B 97, 245428 (2018).
Mills, A. R. et al. Shuttling a single charge across a one-dimensional array of silicon quantum dots. Nat. Commun. 10, 1063 (2019).
Yoneda, J. et al. Coherent spin qubit transport in silicon. Nat. Commun. 12, 4114 (2021).
Ginzel, F., Mills, A. R., Petta, J. R. & Burkard, G. Spin shuttling in a silicon double quantum dot. Phys. Rev. B 102, 195418 (2020).
Mi, X. et al. Circuit quantum electrodynamics architecture for gate-defined quantum dots in silicon. App. Phys. Lett. 110, 43502 (2017).
Stockklauser, A. et al. Strong coupling cavity QED with gate-defined double quantum dots enabled by a high impedance resonator. Phys. Rev. X 7, 11030 (2017).
Fong, B. H. & Wandzura, S. M. Universal quantum computation and leakage reduction in the 3-qubit decoherence free subsystem. Quantum Info. Comput. 11, 1003–1018 (2011).
Doherty, A. C. & Wardrop, M. P. Two-qubit gates for resonant exchange qubits. Phys. Rev. Lett. 111, 050503 (2013).
Shim, Y. P. & Tahan, C. Charge-noise-insensitive gate operations for always-on, exchange-only qubits. Phys. Rev. B 93, 121410(R) (2016).
Paladino, E., Galperin, Y., Falci, G. & Altshuler, B. L. 1/f noise: Implications for solid-state quantum information. Rev. Mod. Phys. 86, 361–418 (2014).
Fei, J. et al. Characterizing gate operations near the sweet spot of an exchange-only qubit. Phys. Rev. B 91, 205434 (2015).
Frees, A., Mehl, S., Gamble, J. K., Friesen, M. & Coppersmith, S. N. Adiabatic two-qubit gates in capacitively coupled quantum dot hybrid qubits. npj Quantum Inf. 5, 73 (2019).
Medford, J. et al. Quantum-dot-based resonant exchange qubit. Phys. Rev. Lett. 111, 050501 (2013).
Taylor, J. M., Srinivasa, V. & Medford, J. Electrically protected resonant exchange qubits in triple quantum dots. Phys. Rev. Lett. 111, 050502 (2013).
Russ, M. & Burkard, G. Asymmetric resonant exchange qubit under the influence of electrical noise. Phys. Rev. B 91, 235411 (2015).
Wardrop, M. P. & Doherty, A. C. Characterization of an exchange-based two-qubit gate for resonant exchange qubits. Phys. Rev. B 93, 075436 (2016).
Das Sarma, S., Wang, X. & Yang, S. Hubbard model description of silicon spin qubits: charge stability diagram and tunnel coupling in Si double quantum dots. Phys. Rev. B 83, 235314 (2011).
Schrieffer, J. R. & Wolff, P. A. Relation between the Anderson and Kondo Hamiltonians. Phys. Rev. 149, 491–492 (1966).
Gros, C., Joynt, R. & Rice, T. M. Antiferromagnetic correlations in almost-localized Fermi liquids. Phys. Rev. B 36, 381–393 (1987).
MacDonald, A. H., Girvin, S. M. & Yoshioka, D. t/U expansion for the Hubbard model. Phys. Rev. B 37, 9753–9756 (1988).
Chan, K. W. et al. Assessment of a silicon quantum dot spin qubit environment via noise spectroscopy. Phys. Rev. Appl. 10, 44017 (2018).
Struck, T. et al. Low-frequency spin qubit energy splitting noise in highly purified 28Si/SiGe. npj Quantum Inf. 6, 1–7 (2020).
Russ, M., Ginzel, F. & Burkard, G. Coupling of three-spin qubits to their electric environment. Phys. Rev. B 94, 165411 (2016).
Huang, P., Zimmerman, N. M. & Bryant, G. W. Spin decoherence in a two-qubit CPHASE gate: the critical role of tunneling noise. npj Quantum Inf. 4, 62 (2018).
Timmer, J. & Koenig, M. On generating power law noise. Astron. Astrophys. 300, 707–707 (1995).
Patzelt, F. Python package to generate gaussian (1/f)**beta noise. https://github.com/felixpatzelt/colorednoise (2019).
Makhlin, Y. Nonlocal properties of two-qubit gates and mixed states and optimization of quantum computations. Quant. Inf. Proc. 1, 243–252 (2004).
Pal, A., Rashba, E. I. & Halperin, B. I. Exact CNOT gates with a single nonlocal rotation for quantum-dot qubits. Phys. Rev. B 92, 125409 (2015).
Łuczak, J. & Bułka, B. R. Two-qubit logical operations in three quantum dots system. J. Phys. Condens. Matter 30, 225601 (2018).
Wang, X., Yu, C. S. & Yi, X. X. An alternative quantum fidelity for mixed states of qudits. Phys. Lett. A 373, 58–60 (2008).
Green, T. J., Sastrawan, J., Uys, H. & Biercuk, M. J. Arbitrary quantum control of qubits in the presence of universal noise. New J. Phys. 15, 095004 (2013).
Nielsen, M. A. & Chuang, I. L. Quantum Computation and Quantum Information (Cambridge University Press, 2010).
Kubo, R. Generalised cumulant expansion method. J. Phys. Soc. Japan 17, 1100–1120 (1962).
Kubo, R. Stochastic Liouville equations. J. Math. Phys. 4, 174–183 (1963).
Aliferis, P. & Cross, A. W. Subsystem fault tolerance with the Bacon-Shor code. Phys. Rev. Lett. 98, 220502 (2007).
Aliferis, P., Gottesman, D. & Preskill, J. Accuracy threshold for postselected quantum computation. Quantum Info. Comput. 8, 181–244 (2008).
Aharonov, D. & Ben-Or, M. Fault-tolerant quantum computation with constant error rate. SIAM J. Comput. 38, 1207–1282 (2008).
Paz-Silva, G. A., Norris, L. M., Beaudoin, F. & Viola, L. Extending comb-based spectral estimation to multiaxis quantum noise. Phys. Rev. A 100, 042334 (2019).
Hanson, R. & Burkard, G. Universal set of quantum gates for double-dot spin qubits with fixed interdot coupling. Phys. Rev. Lett. 98, 050502 (2007).
Davies, J. The Physics of Low-dimensional Semiconductors (Cambridge University Press, 1997).
Annavarapu, R. N. Singular value decomposition and the centrality of Löwdin orthogonalizations. Am. J. Comput. Appl. Math. 3, 33–35 (2013).
Zhang, C., Yang, X. C. & Wang, X. Leakage and sweet spots in triple-quantum-dot spin qubits: a molecular-orbital study. Phys. Rev. A 97, 042326 (2018).
Acknowledgements
M.K.F. was supported by a Singapore Ministry of Education AcRF Tier 1 grant (RG177/16), and acknowledges useful discussions with Jun Yoneda. L.H.Z. was supported by the SGUnited program (CP0002392). We thank the Nanyang Technological University (NTU) High Performance Computing Center for computing support, and the Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, NTU, for financial support.
Author information
Authors and Affiliations
Contributions
T.S.K. and M.K.F. contributed to the idea of capacitive two-qubit gates. M.K.F. and L.H.Z. performed the numerical simulations and analytical calculations. All authors analyzed the data and results. T.S.K. wrote the main manuscript with input from all authors. M.K.F. and L.H.Z. wrote the supplementary material. The project was carried out under the supervision of T.S.K.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Feng, M., Zaw, L.H. & Koh, T.S. Two-qubit sweet spots for capacitively coupled exchange-only spin qubits. npj Quantum Inf 7, 112 (2021). https://doi.org/10.1038/s41534-021-00449-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41534-021-00449-4
- Springer Nature Limited