Abstract
Light-driven rotary molecular motors are among the most promising classes of responsive molecular machines and take advantage of their intrinsic chirality which governs unidirectional rotation. As a consequence of their dynamic function, they receive considerable interest in the areas of supramolecular chemistry, asymmetric catalysis and responsive materials. Among the emerging classes of responsive photochromic molecules, multistate first-generation molecular motors driven by benign visible light remain unexplored, which limits the exploitation of the full potential of these mechanical light-powered systems. Herein, we describe a series of all-visible-light-driven first-generation molecular motors based on the salicylidene Schiff base functionality. Remarkable redshifts up to 100 nm in absorption are achieved compared to conventional first-generation motor structures. Taking advantage of all-visible-light-driven multistate motor scaffolds, adaptive behaviour is found as well, and potential application in multistate photoluminescence is demonstrated. These functional visible-light-responsive motors will likely stimulate the design and synthesis of more sophisticated nanomachinery with a myriad of future applications in powering dynamic systems.
Similar content being viewed by others
Introduction
The impressive collection of molecular machinery found in Nature has served as a blueprint for scientists in their endeavour to control motion at the molecular level1. Artificial molecular machines enable controlled movement of their molecular components and facilitate the shift in contemporary chemistry from static molecules to dynamic and adaptive molecular systems and responsive materials2,3,4,5,6,7,8,9,10. Particularly attractive are the light-driven overcrowded-alkene-derived motors capable of performing repetitive unidirectional rotary motion upon illumination11,12. They have been exploited among others in liquid-crystals13,14,15, adaptive catalysis16,17, supramolecular systems18,19,20,21 and porous materials22,23,24. The first generation of such overcrowded-alkene-based motors consists of identical upper and lower halves both featuring stereogenic centres which dictate the direction of rotation (Fig. 1). The second generation of motors possesses distinct motor halves in which a single stereogenic centre governs the unidirectionality. For both classes of motors the 360° rotary cycle features two energetically uphill photoisomerization steps and two thermally activated, energetically downhill steps which are referred to as thermal helix inversions (THIs)25.
A Conventional first-generation MM’s unidirectional cycle triggered by 312 nm light. B Salicylideneaniline-based switch and its tautomerization behaviour. C The design of Salicylidene Schiff base functionalization towards visible-light-driven first-generation molecular motors with multiple advantages.
In order to exploit the full potential of these light-driven molecular motors (MMs) in materials and biological systems, it is important to move away from the use of highly energetic and potentially damaging ultraviolet (UV) excitation, which is currently used to power several of these rotary motors. Various strategies have recently been explored to drive motor rotation by visible light, such as sensitization26,27, metal complexation28 or via bathochromically shifting the absorption maximum (λmax) of the motor scaffold by virtue of electronic push-pull substituent effects29,30 or π-system extension31. Furthermore, alternative motor designs, especially by the Dube group, responsive towards visible light have been described recently32,33,34. However, coupling visible-light addressability to applications within one simple motor design is intriguing, yet highly challenging10. So far, our efforts towards redshifting these systems have only been focussed on the second-generation MMs35. Recently, we demonstrated the synergistic combination of photoluminescence (PL) and motor rotation driven by visible light36. Surprisingly, the development of all-visible-light-powered first-generation MMs, which serve as unique multistate chiroptical switches37,38, remains unreported. The majority of first-generation motor cores can only be driven by UV light (300–312 nm) (Fig. 1A)39,40, severely limiting practical applications. Despite the absence of visible-light-driven first-generation MMs, these motors represent a prominent class of nanomachinery with intrinsically dynamic chirality which has been implemented in cholesteric liquid crystal materials, spin selective electron transport, and supramolecular systems to acquire spatiotemporal control over organization and properties in dynamic systems10,41. Whereas second-generation MMs are more suitable for continuous rotation applications, requiring rotary motion at velocious speed, first-generation MMs could fulfil a pivotal role in the growing demand for stimuli-adaptive multistage systems, capable of adopting multiple distinctive states with sequence specificity such as three-state chiroptical switches.
Salicylidene Schiff bases have drawn attention for decades due to their photochromic and thermochromic behaviour. Instalment of a salicylidene Schiff base unit onto a neighbouring arene motif leads in certain cases to strong absorption of visible light via a subtle interplay of the system’s π-conjugation, the intramolecular H-bonding within the Schiff base framework and solvent polarity42,43. Besides potential visible-light absorption, the presence of salicylidene Schiff bases and derivatives offers additional prospects for coordination chemistry44, (asymmetric) catalysis45,46, supramolecular assembly47, molecular photoswitches48,49 and material sciences50,51,52. Recently, Zhu and co-workers developed a series of all-visible-light-responsive dithienylethene (DTE) photoswitches via an intramolecular proton transfer (IPT) strategy governed by salicylidene Schiff base moieties, showing promising advantages of this functionality53.
Herein, we report a general synthetic strategy to combine the first-generation MMs’ modality with salicylidene Schiff base functionalities in one structure, thereby not only making the hybrid motor visible-light-responsive, but also amplifying distinctive physical features (e.g. photoluminescence (PL) and metal coordination affinity) of the different motor states. We devised all-visible-light-driven first-generation MMs with approximately 110 nm redshifted absorption maxima compared with the frequently used motor motifs upon instalment of salicylidene Schiff bases (Fig. 1). Furthermore, besides excellent photostationary state (PSS) distributions (i.e. high efficiency), varying the N-substitution is expected to affect the THI steps, thereby providing us with another tool for facile regulation of their rotary speed. Taking advantage of these all-visible-light-driven multistate motor scaffolds, the systems are employed in representative applications, including metal binding and photoluminescence modulation. We envision this simple synthetic modification to be an attractive strategy for the design and synthesis of future generations of visible-light-driven molecular motors.
Results
Motor synthesis
Taking advantage of our recently developed salicylaldehyde motor compounds54, a one-step conversion using a Brønsted-acid-catalysed condensation protocol with aniline, 2-naphthylamine and n-butylamine leads the corresponding racemic bis(salicylimine) Zst-M1-M3 motors in good yields (Fig. 2A). By careful selection of the substituent attached to the imino nitrogen, we envisioned to tune the absorption maximum of the system upon extension of the π-system (λmax R = alkyl <R = phenyl <R = polycyclic arenes). Zst-M1-OMe, in which the phenolic moieties of M1 are methylated (Supplementary Information, section 2), was prepared as a reference in order to investigate the potential effect of hydrogen bonding within the salicylidene Schiff base-based motif on the motor’s (photochemical) properties. Beyond imines, the (acyl)hydrazone functional group has recently attracted attention in the fields of dynamic materials55, metal coordination56 and redox chemistry57. Elegant examples of the latter include hydrazone-based switches58,59 and rotors60 pioneered by Aprahamian and co-workers. To demonstrate the versatility of the formyl group as a handle for further functionalization of the motor scaffold, bis(salicaldehyde) motor PM was condensed with benzhydrazide to introduce the acylhydrazone functionality, which is closely related to the structural imine motif. Thus, reacting racemic and enantiopure (R,R)-(P,P) parent motor PM with benzhydrazide in boiling ethanol quantitatively gave racemic and (R,R)-(P,P) acylhydrazone-functionalized Zst-M4, respectively (Fig. 2B). All motors were fully characterized by 1H NMR, 13C NMR, HRMS and Circular Dichroism (CD) spectroscopies. It is worth mentioning that motors M1–M4 are very sensitive to ambient light, such that we would often observe slight amounts of isomerized compounds in 1H NMR, underlining indeed the visible-light responsiveness of the constructed motors by this strategy.
Computational studies
Time-dependent density functional theory (TDDFT) is a well-established extension to density functional theory (DFT) to calculate properties for time-dependent systems, such as excitation energies and photoabsorption spectra61. TDDFT calculations at the CAM-B3LYP-D3BJ/def2-TZVPP/CPCM(CH2Cl2)//r2SCAN-3c/CPCM(CH2Cl2)62,63,64,65,66 level of theory (Supplementary Information, section 12) showed a significant effect on the maximum absorption wavelengths upon instalment of salicylaldehyde Schiff bases in both halves of the first-generation motor scaffold (Table 1 and Supplementary Table 1). Compared to the conventional molecular motors lacking both the imine and hydroxy functionality (M-oR), the maximum absorption wavelengths of the hydrogen-bonded M-OH structures were calculated to be more than 50 nm redshifted. Furthermore, calculations show that the presence of only the hydroxy functionality (M-oOH) has a negligible effect on the absorption wavelength of these motors. Whereas instalment of only the imine functionality (M-H) already leads to an appreciable redshift, comparison of the salicylaldehyde Schiff base motors with their methoxy-substituted analogues (M-OMe) shows that it is the unique combination of both the imine and hydroxy functionality that leads to the strongest bathochromic shift. For M1 and M2, with aryl substituents at the Schiff base nitrogen, the calculated λmax corresponds to wavelengths >390 nm, less than 10 nm away from the 400 nm threshold, frequently considered as the onset of the visible light range for photochromic materials. For previous visible-light-driven second-generation motors, it has been shown that the predicted λmax is an underestimation of the experimental excitation wavelength30, especially when solvent effects have a profound influence on the absorption properties. We therefore anticipate that these salicylaldehyde Schiff base incorporating first-generation motor systems can be fuelled with light at wavelengths beyond 400 nm (see experimental results, vide infra), thereby functioning as visible-light-responsive nanomachinery.
Rotary behaviour of M1
Initial UV-Vis studies of imine-motor Zst-M1, bearing a salicylidene Schiff-base substituent, and structurally related first-generation molecular Motor-S1 (Fig. 3A) show that the absorption maxima are redshifted by >85 nm, with the absorption maximum of Zst-M1 in the visible range of the spectrum at ca. 415 nm (Fig. 2A). Although the λmax (385 nm) of Zst-PM (Fig. 2) is already bathochromically shifted with respect to conventional first-generation motors, like Motor-OH, the redshift of Zst-M1 is nevertheless considerable with a difference > 30 nm between the absorption maxima of Zst-PM and Zst-M1.
A. Normalized UV-Vis spectra of Zst-M1 and motor motif Zst-Motor-S1. B Schematic overview of the rotary cycle of M1. C UV-Vis analysis of the rotary cycle: before irradiation (orange), upon 415 nm light irradiation (red) and after THI (green). D 1H NMR (CD2Cl2, 600 MHz) spectra indicating rotary behaviour of M1: before irradiation (Zst, yellow, bottom), PSS 415 nm at −40 °C (Emst, cyan), THI (Est, blue), PSS 415 nm at −40 °C (Zmst, red) and THI (Zst, green, top).
To demonstrate that the operational cycle of M1 is driven by visible-light irradiation, its unidirectional trajectory was confirmed by a combination of UV-Vis and 1H NMR spectroscopy (Fig. 3B–D). In accordance with our previously described first-generation molecular motors, the rotation cycle of M1 involves two photochemical isomerization steps, each accompanied by an energetically downhill THI interconversion.
Upon irradiation of a solution of Zst-M1 (cis stable isomer, i-PrOH, 293 K) using 415 nm light, the characteristic absorption band of stable Zst-M1 at 400–425 nm decreased concomitantly with an increase in absorption at 425–475 nm. Due to the short half-life of metastable Emst-M1 (trans metastable isomer) at 20 °C, the appearance of the absorption band at 425–475 nm is indicative of the selective photochemical interconversion from stable Zst-M1 to metastable Zmst-M1 (cis metastable isomer) through Emst-M1 and Est-M1(trans stable isomer) intermediates (Fig. 3B and Supplementary Fig. 9). Subsequently, upon heating the sample at 50 °C, the previously formed absorption band at 425–475 nm (λmax = 423 nm, Fig. 2C) diminished while the initial absorption band at 400–425 nm was recovered, proving the THI process from Zmst-M1 to Zst-M1 to occur. Eyring analysis was performed to determine the Gibbs energy of activation for the THI process Zmst-M1 → Zst-M1 in order to calculate the thermal half-life (t1/2) at room temperature which was found to be approximately 29 h. (Table 2 and Supplementary Fig. 4).
Further confirmation of the 360°rotary cycle and determination of the photostationary state (PSS) ratio of each photochemical step, i.e. Zst-M1 → Emst-M1 → Est-M1→ Zmst-M1 → Zst-M1, was provided by 1H NMR spectroscopy (CD2Cl2, 500 MHz) which allowed for the identification of all diastereoisomers following a unidirectional trajectory (Fig. 2D). Irradiation of stable Zst-M1 with 415 nm light at low temperature (−40 °C) led to formation of metastable Emst-M1, resulting in a high PSS ratio, i.e., Zst-M1: Emst-M1 = 81:19, with the characteristic signal at 0.8 ppm of Emst-M1, thereby confirming that instalment of the salicylidene Schiff base functionalities does not compromise the light-induced isomerization performance of the motor. Allowing the sample to reach 25 °C gave quantitative conversion of metastable Emst-M1 towards stable Est-M1 through the first THI pathway, thereby completing the first half of the rotary cycle. Consecutive illumination of Est-M1 at −40 °C resulted in photoisomerization towards metastable Zmst-M1 (Est-M1: Zmst-M1 = 85:15 at the PSS) which was interconverted at room temperature to the initial diastereoisomer Zst-M1 via the second THI interconversion, thus completing the 360° rotation cycle (Fig. 3C, D). (For further support using CD spectroscopy of the unidirectional cycle of closely related Schiff base motor M4, see below).
Impact of solvents and temperature on motor rotation behaviour
Due to the well-established polarity and temperature dependence of the tautomerization of salicylidene Schiff bases (Fig. 1B)42,43, we studied the dependence of the absorption properties of Zmst-M1 as a function of solvent (Fig. 4A). UV-Vis spectra were measured in a wide range of solvents including protic and aprotic solvents (Fig. 4B and Supplementary Fig. 8). Indeed solvatochromism occurred in the form of redshifted bands in the more polar protic solvents (i.e. EtOH and MeOH) in accordance with the observation by Zhu53 and London67 for dithienylethene-based systems containing salicylidene Schiff bases. New bands emerge in polar protic solvents (Fig. 4B, orange and green spectra) which we attribute to the NH tautomer (keto form) of the salicylidene Schiff base induced via intramolecular proton transfer, implying an eminent influence on the photophysical properties of M1. TDDFT calculations indicate that the keto tautomers of motors M1-M3 are indeed considerably redshifted compared with the enol tautomers (see Supplementary Table 1).
A. Illustration of tautomerization of M1 between OH-form and NH-form. B Part of normalized UV-Vis spectra of Zst-M1 in a large set of solvents, close-up of the 440−520 nm window. C Chemical shifts of OH resonance in 1H spectra of Est-M1 in CD2Cl2 at elevated temperatures, indicating the decreasing strength of H-bonding (from top to bottom). D Temperature dependence of the PSS from Est-M1 → Zmst-M1.
To investigate the effect of hydrogen bonding/tautomerization behaviour on the absorption properties of M1 in greater detail, Zst-M1-OMe was synthesized as a reference compound. M1 and Motor-S2 show characteristic absorption bands at λmax = 420 nm and λmax = 380 nm in isopropanol, respectively. This indicates that the bathochromic shift observed for M1 is not exclusively an effect of the extension of the motor’s π-system (Supplementary Fig. 8), but also a consequence of the unique properties of the salicylidene unit, as was also confirmed by the TDDFT calculations (see Supplementary Table 1).
Remarkably, we further observed a solvent dependency on the rotation behaviour of M1. Motor M1 displays high PSS ratios in polar, protic alcoholic solvents upon 415 nm light irradiation, while the PSS is sharply reduced in non-polar solvents (Supplementary Fig. 9), presumably due to the shift in the equilibrium between the OH- and NH-forms within the salicylidene Schiff base unit impacting photoisomerization of M168,69. To support this explanation, we envisioned temperature as another factor affecting salicylidene Schiff base tautomerization and concomitantly motor rotation. When performing 1H NMR irradiation studies at three distinctive temperatures, the PSS indeed showed to be temperature dependent with decreased PSS ratios at higher temperatures (Fig. 4D and Supplementary Fig. 13). The shifts of the OH resonance observed by 1H NMR for Est-M1 at elevated temperatures indicate the difference in H-Bonding strength (Fig. 4C)68. Although the exact mechanism of this multiple stimuli dependency (i.e. solvent and temperature) on the PSS remains elusive and complicated, it is clear that the tautomerization process severely influenced the photoisomerization of the motors70. these findings might facilitate the exploration of smart, adaptable motor-based systems that can adjust to the conditions of their environment.
The incorporation of salicylidene Schiff-base moieties in these motor systems introduces the possibility of competing photochemical pathways, i.e., intramolecular excited-state proton transfer71 and photoinduced E-Z switching of the imine functionality72, which could impart a reduction in the quantum yield of photochemical motor isomerization. However, the benefit that these motors possess, e.g., their visible-light responsiveness, outweighs the potential lowering of the photoisomerization quantum yields providing that the photostationary state (PSS) distributions and therefore the corresponding rotary functions remain largely unaffected. With respect to the latter, M1 and M2 reach PSS ratios well-over 80% at room temperature in non-polar solvents, fulfilling the key criteria, and reveal minimal effects of competing photochemical reaction channels for these specific motors.
Extension of strategy to other salicylidene Schiff base derived motors
The successful strategy of introducing salicylidene Schiff bases in M1 was used as a starting point for the construction of a collection of redshifted first-generation molecular motors. To illustrate, motor M2, containing naphthyl substituents at the imino nitrogens of the Schiff bases, exhibits a λmax at 420 nm, slightly more redshifted compared to M1, as a consequence of the extended π-system involving the naphthyl residues (Fig. 5A). Upon irradiation of stable Zst-M2 with 420 nm light at 20 °C, the characteristic absorption band located at 430 nm diminished, accompanied by the emergence of a new band at 460 nm, which can be ascribed to the photoinduced formation of metastable Zmst-M2. 1NMR spectroscopy revealed 90% of Zmst-M2 (Est-M2: Zmst-M2 = 90:10) at the PSS, proving the excellent rotation behaviour (Supplementary Fig. 18). Eyring analysis at various temperatures was carried out to determine the Gibbs energy of activation for the THI step (Zmst-M2 → Zst-M2) for the purpose of calculating the corresponding thermal half-life (t1/2). The half-life of M2 was found to be larger (t1/2 = 36 h, 20 °C) compared to the value for M1 (Table 2 and Supplementary Fig. 5).
A. UV-Vis spectra of Zst-M2 (orange), after 420 nm light irradiation (PSS, purple) and after THI (pink) measured in i-PrOH. B UV-Vis spectra of Zst-M3 (orange), after 365 nm light irradiation (PSS, purple-red) and after THI (cream) measured in i-PrOH. C UV-Vis spectra of Zst-M4 (orange), after 415 nm light irradiation (deep blue) and after THI (yellow) measured in DMSO. D CD spectra of (R,R)-(P,P)-Zst-M4 before irradiation (orange), after 415 nm light irradiation (PSS, blue), and after THI (yellow, dashed) measured in DMSO.
The incorporation of an aliphatic butyl chain onto the imine functionalities in M3 led to a λmax of stable Zst around 375 nm (Fig. 5B). It is noteworthy to mention that M3 has no extension of its π-system beyond the imine residues of the salicylidene Schiff bases. While comparing M3 to motor M1-OMe, which has an extended π-system, we observed that both motors show similar absorption maxima, in support of the additional bathochromic shifting effect due to the salicylidene Schiff base motif.
The full rotation cycles of M2 and M3 were studied in detail by a combination of UV-Vis and 1H NMR spectroscopy. Consistent with the photochemical behaviour of M1, both M2 and M3 shows solvent and temperature dependence in reaching PSS. Remarkably, M3 shows a much more significant temperature dependence of the photoisomerization from Est-M3 to Zmst-M3 compared to M1 and M2, as the PSS ratio decreased from 81:19 to 43:57 (Zmst-M3: Est-M3)70. To illustrate the versatility and tunability of the salicylidene Schiff base derived first-generation motor structural motif, we next installed a Schiff base alternative, the structural related acylhydrazone functionality, which yielded motor Zst-M4 as well as the enantiopure (R,R)-(P,P) Zst-M4 via a simple synthetic protocol (Fig. 1B).
Like M1 – M3, the main absorption band of M4 undergoes an appreciable redshift with the λmax located at 405 nm, thus expanding the toolbox of first-generation motors with an additional scaffold responsive towards visible light (Fig. 5C). Upon irradiation with 415 nm light at 20 °C, stable Zst-M4 photochemically isomerized into metastable Emst-M4, with clear isosbestic points. However, due to the short half-life of metastable Emst-M4 at ambient temperatures, the decrease of the absorption band around 390–410 nm and the appearance of the characteristic absorption band around 400–450 nm represents the selective photochemical interconversion between Zst-M4 to Zmst-M4. The initial absorption band for Zst-M4 (390–410 nm) was obtained again after heating the sample in the dark at elevated temperatures, thereby permitting the THI to occur (t1/2 = 98 h, Table 2 and Supplementary Fig. 7). To demonstrate fatigue resistance and overall stability, M4 was subjected to multiple consecutive irradiation and heating cycles which were followed by 1H NMR spectroscopy. Over the course of five rotary cycles, the initial and final spectra of Zst-M4 showed to be indistinguishable, confirming clean (photo)isomerization and general robustness of this motor system (Supplementary Fig. 26). The PL of M1 can be reversibly modulated for several cycles without fatigue, indicating excellent and advantageous (photo)stability (Supplementary Fig. 25).
To unequivocally establish the unidirectional rotary cycle of M4 was further analysed by CD spectroscopy (Fig. 5D and Supplementary Fig. 3). (R,R)-(P,P) Zst-M4 exhibits a positive Cotton effect located at 425–340 nm in the CD spectrum. Upon irradiation at room temperature, the positive signal disappeared concomitantly with the emergence of a negative Cotton effect at 525–400 nm, characteristic of the opposite chirality of (M,M)-Zmst-M4. A nearly identical CD spectrum was obtained after heating the same sample at elevated temperatures in the dark, indicating the progression of the THI from (M,M)-Zmst-M4 to (P,P)-Zst-M4, thus completing the 360° rotation. Alternatively, irradiating a solution of Zmst-M4 solution at 455 nm led to the formation of Est-M4, which results in a characteristic blue-shifted absorption band (λmax around 400 nm) and a concomitant change of the CD spectrum. It is worth noting that in the case for M4 no temperature dependence on the photochemical behaviour was observed (Supplementary Fig. 17), which might be due to the stable structure of the acylhydrazone which possibly does not show a tautomerization process.
Demonstration of potential applications as multistate photoswitches driven by visible light
The first-generation molecular motor core is a prominent scaffold known as a multistate photoswitch which has been widely used in controlling dynamic systems by light. Notably, the system is enabled to drive first-generation molecular motors as a multistate photoswitch solely by two distinct wavelengths of visible light (Fig. 6A), opening up new avenues to construct dynamic systems and materials.
A Illustration of first-generation molecular motor M1 as an all-visible-light-driven multistate photoswitch. B UV-Vis spectra of M1 (in i-PrOH) in different states by visible-light activation. C Modulation of luminescence of M1 depending on different motor states (λex = 410 nm). D Normalized UV-Vis analysis of binding of M4 to Zn2+ (large access equiv. of Zn(OTf)2 in DMSO). E Activation of photoluminescence of M4 upon Zn2+ addition (λex = 400 nm).
Irradiation of Zst-M1 at room temperature by 415 nm light led to the direct formation of Zmst-M1 across ¾ rotary cycle (Fig. 6B, red line). Subsequently, Zmst-M1 can be selectively isomerized towards stable Est-M1 at 455 nm (Fig. 6B, blue line), thereby making M1 an all-visible-light-driven multistate chiroptical switch (Fig. 6A). M2-M4 also show visible-light responsiveness up to 470 nm light, similarly to M1 (Supplementary Figs. 1–3).
To illustrate the potential of the previously described functional molecular motors, M1 was employed for the modulation of multistate luminescence. Zst-M1 was found to be a luminescence active compound but no solvent dependent luminescence behaviour was observed (Supplementary Fig. 21). We anticipated that the switching of different states of M1 could lead to the multistate luminescence activation. To our delight, upon 415 nm light irradiation of Zst-M1, the PL of the system is significantly reduced (Fig. 6C). Subsequent illumination with 455 nm light, going from Zmst-M1 to Est-M1, leads to a partial increase of luminescence compared to that of the initial state. The PL of M1 can be reversibly modulated for several cycles without fatigue, indicating excellent and advantageous (photo)stability (Supplementary Fig. 25). These data show that the intensity of PL within a single molecule is controlled by visible light-induced toggling between the different motor states.
Acylhydrazone compounds are known to bind metal ions, hence we explored whether M4 could be used to control ion binding. Metal binding has previously been employed in our group to modulate several properties of molecular motors, such as their rotation speed, absorption wavelength and the mechanism of the thermal part of the rotary cycle28,73,74. Upon Zn2+ addition, a ~ 70 nm redshift in the UV-Vis spectra is observed (Fig. 6D), confirming the strong binding affinity of M4. In contrast to Zst-M1, M4 show negligible luminescence in the Zst-M4 state. Due to the weak binding affinity of M4 as a ligand, up to 30 equivalents of Zn2+ are required for quantitative binding, which is consistent with literature precedence (Supplementary Fig. 24)75. Surprisingly, after binding of Zn2+ to a solution of M4, the PL of Zst-M4 is fully turned on, illustrating that metal coordination leads to PL modulation in this system (Fig. 6E). Detailed investigation of the photoisomerization behaviour of the M4-Zn complex shows that Zst-M4-Zn can be quantitatively (PSS455 95:5) converted to Zmst-M4-Zn as observed by UV-Vis and 1H NMR spectroscopy upon irradiation with 455 nm light (Supplementary Fig. 23). Interestingly, the PL of M4-Zn is practically quenched upon isomerization to Zmst-M4-Zn, meanwhile Est-M4-Zn exhibits similar emission intensity as Zst-M4-Zn (Supplementary Fig. 22). These results show that simple metal complexation reveals additional features, i.e. switchable photoluminescence, generating a non-trivial dual-functioning molecular motor system27,36.
In summary, we have established a practical strategy to access a series of versatile visible-light-driven first-generation molecular motors based on the salicylidene Schiff base motif. Using this simple structural modification, redshifts up to 100 nm for the absorption bands of the molecular motors compared to the absorption of the widely used first-generation motor scaffold have been realized, resulting in an all-visible-light-driven function without affecting the motor’s unidirectional rotary behaviour. Interestingly, instalment of the salicylidene Schiff bases in both halves of the motor scaffolds renders these motors adaptable to the surroundings, i.e., the photostationary state shows dependency on temperature as well as solvent polarity, which is attributed to the equilibrium between OH- and NH-forms in the presented design. We foresee that this dependency will provide opportunities for additional control over motor rotation which leads to further fine-tuning of its dynamic behaviour.
Furthermore, extension of this strategy to the structurally related acylhydrazone functionality still permits motor rotation upon visible-light illumination. Additional exploitation of these motor designs shows that they are suitable for implementation in areas such as (light) responsive organic emitters and metal ion sensing. Given the fact that the salicylidene Schiff base motif has been widely exploited in the fields of dynamic and supramolecular chemistry, catalysis and porous materials such as covalent organic frameworks, and in combination with the dynamic chirality of molecular motor cores, we foresee ample opportunity for future development using this motor platform to construct versatile all-visible-light responsive dynamic systems and materials.
Methods
Steady-state UV-vis absorption spectroscopy studies
Solutions of Motors were prepared in different organic solvents. 1.0 cm quartz cuvette was used for UV measurements with 2.0 mL solution in it. Samples were placed in the cuvette holder of an Agilent 8453 UV-vis Diode Array System, equipped with a Quantum Northwest Peltier controller. Irradiation studies were carried out using fibre-coupled LEDs (M365F1, M415FP1, M420F2, M455F1, M470F1) obtained from Thorlabs Inc.
NMR irradiation studies
For isomerization studies, ca. 2 × 10–3 M solutions of samples were prepared in CD2Cl2 or DMSO-d6 solvents. For each experiment 600 μL samples were transferred into an NMR tube that used for in situ irradiation studies. The NMR tube was subsequently fitted with a glass fibre cable. NMR spectra were recorded on a Varian Unity Plus 500 NMR spectrometer. Chemical shifts are given in parts per million (ppm) relative to the residual solvent signal.
Data availability
Data that support the findings of this study are available within the Supplementary Information. All data are available from the corresponding author upon request. The XYZ coordinates of the DFT-optimized structures are available as source data. Source data are provided with this paper.
References
Goodsell, D. S. The machinery of life. Vol. 2nd ed (Springer New York, 2009).
Balzani, V., Credi, A., Raymo, F. M. & Stoddart, J. F. Artificial molecular machines. Angew. Chem. Int. Ed. 39, 3348–3391 (2000).
Kinbara, K. & Aida, T. Toward intelligent molecular machines: directed motions of biological and artificial molecules and assemblies. Chem. Rev. 105, 1377–1400 (2005).
Browne, W. R. & Feringa, B. L. Making molecular machines work. Nat. Nanotechnol. 1, 25–35 (2006).
Sauvage, J.-P. & Gaspard, P. From non-covalent assemblies to molecular machines. (John Wiley & Sons, 2011).
Coskun, A., Banaszak, M., Astumian, R. D., Stoddart, J. F. & Grzybowski, B. A. Great expectations: can artificial molecular machines deliver on their promise? Chem. Soc. Rev. 41, 19–30 (2012).
Feringa, B. L. The art of building small: from molecular switches to motors (Nobel lecture). Angew. Chem. Int. Ed. 56, 11060–11078 (2017).
Aprahamian, I. The future of molecular machines. ACS Cent. Sci. 6, 347–358 (2020).
Baroncini, M., Silvi, S. & Credi, A. Photo- and redox-driven artificial molecular motors. Chem. Rev. 120, 200–268 (2020).
Sheng, J., Pooler, D. R. S. & Feringa, B. L. Enlightening dynamic functions in molecular systems by intrinsically chiral light-driven molecular motors. Chem. Soc. Rev. 52, 5875–5891 (2023).
Koumura, N., Zijlstra, R. W. J., van Delden, R. A., Harada, N. & Feringa, B. L. Light-driven monodirectional molecular rotor. Nature 401, 152–155 (1999).
Sheng, J. et al. Designing P-type bi-stable overcrowded alkene-based chiroptical photoswitches. Chem. Sci. 14, 4328–4336 (2023).
Eelkema, R. et al. Nanomotor rotates microscale objects. Nature 440, 163–163 (2006).
Hou, J. et al. Photo-responsive helical motion by light-driven molecular motors in a liquid-crystal network. Angew. Chem. Int. Ed. 60, 8251–8257 (2021).
Orlova, T. et al. Revolving supramolecular chiral structures powered by light in nanomotor-doped liquid crystals. Nat. Nanotechnol. 13, 304–308 (2018).
Wang, J. & Feringa, B. L. Dynamic control of chiral space in a catalytic asymmetric reaction using a molecular motor. Science 331, 1429–1432 (2011).
Grill, K. & Dube, H. Supramolecular relay-control of organocatalysis with a hemithioindigo-based molecular motor. J. Am. Chem. Soc. 142, 19300–19307 (2020).
Zhao, D., van Leeuwen, T., Cheng, J. & Feringa, B. L. Dynamic control of chirality and self-assembly of double-stranded helicates with light. Nat. Chem. 9, 250–256 (2017).
Chen, J. et al. Artificial muscle-like function from hierarchical supramolecular assembly of photoresponsive molecular motors. Nat. Chem. 10, 132–138 (2018).
van Ewijk, C. et al. Light-triggered disassembly of molecular motor-based supramolecular polymers revealed by high-speed AFM. Angew. Chem. Int. Ed. 63, e202319387 (2024).
Shan, Y. et al. Motorized photomodulator: making a non-photoresponsive supramolecular gel switchable by light. Angew. Chem. Int. Ed. 62, e202310582 (2023).
Danowski, W. et al. Unidirectional rotary motion in a metal–organic framework. Nat. Nanotechnol. 14, 488–494 (2019).
Sheng, J. et al. Construction of a three-state responsive framework from a bistable photoswitch. Chem 9, 2701–2716 (2023).
Castiglioni, F. et al. Modulation of porosity in a solid material enabled by bulk photoisomerization of an overcrowded alkene. Nat. Chem. 12, 595–602 (2020).
Roke, D., Wezenberg, S. J. & Feringa, B. L. Molecular rotary motors: unidirectional motion around double bonds. Proc. Natl Acad. Sci. 115, 9423–9431 (2018).
Cnossen, A. et al. Driving unidirectional molecular rotary motors with visible light by intra- and intermolecular energy transfer from palladium porphyrin. J. Am. Chem. Soc. 134, 17613–17619 (2012).
Pfeifer, L., Hoang, N. V., Crespi, S., Pshenichnikov, M. S. & Feringa, B. L. Dual-function artificial molecular motors performing rotation and photoluminescence. Sci. Adv. 8, eadd0410 (2022).
Wezenberg, S. J., Chen, K. Y. & Feringa, B. L. Visible-light-driven photoisomerization and increased rotation speed of a molecular motor acting as a ligand in a ruthenium(II) complex. Angew. Chem. Int. Ed. 54, 11457–11461 (2015).
van Delden, R. A., Koumura, N., Schoevaars, A., Meetsma, A. & Feringa, B. L. A donor–acceptor substituted molecular motor: unidirectional rotation driven by visible light. Org. Biomol. Chem. 1, 33–35 (2003).
Pfeifer, L. et al. Photoefficient 2nd generation molecular motors responsive to visible light. Chem. Sci. 10, 8768–8773 (2019).
van Leeuwen, T., Pol, J., Roke, D., Wezenberg, S. J. & Feringa, B. L. Visible-light excitation of a molecular motor with an extended aromatic core. Org. Lett. 19, 1402–1405 (2017).
Guentner, M. et al. Sunlight-powered kHz rotation of a hemithioindigo-based molecular motor. Nat. Commun. 6, 8406 (2015).
Gerwien, A., Mayer, P. & Dube, H. Photon-only molecular motor with reverse temperature-dependent efficiency. J. Am. Chem. Soc. 140, 16442–16445 (2018).
Roke, D., Sen, M., Danowski, W., Wezenberg, S. J. & Feringa, B. L. Visible-light-driven tunable molecular motors based on oxindole. J. Am. Chem. Soc. 141, 7622–7627 (2019).
Wang, H., Bisoyi, H. K., Zhang, X., Hassan, F. & Li, Q. Visible light-driven molecular switches and motors: recent developments and applications. Chemistry 28, e202103906 (2022).
Toyoda, R. et al. Synergistic interplay between photoisomerization and photoluminescence in a light-driven rotary molecular motor. Nat. Commun. 13, 5765 (2022).
Feringa, B. L., van Delden, R. A., Koumura, N. & Geertsema, E. M. Chiroptical molecular switches. Chem. Rev. 100, 1789–1816 (2000).
Pianowski, Z. L. Molecular Photoswitches: Chemistry, Properties, and Applications, 2 Volume Set. (2022 Wiley‐VCH GmbH, 2022).
Pollard, M. M., Meetsma, A. & Feringa, B. L. A redesign of light-driven rotary molecular motors. Org. Biomol. Chem. 6, 507–512 (2008).
Pooler, D. R. S., Lubbe, A. S., Crespi, S. & Feringa, B. L. Designing light-driven rotary molecular motors. Chem. Sci. 12, 14964–14986 (2021).
van Leeuwen, T., Lubbe, A. S., Štacko, P., Wezenberg, S. J. & Feringa, B. L. Dynamic control of function by light-driven molecular motors. Nat. Rev. Chem. 1 https://doi.org/10.1038/s41570-017-0096 (2017).
Sobczyk, L., Grabowski, S. J. & Krygowski, T. M. Interrelation between H-Bond and Pi-Electron Delocalization. Chem. Rev. 105, 3513–3560 (2005).
Houjou, H., Shingai, H., Yagi, K., Yoshikawa, I. & Araki, K. Mutual interference between intramolecular proton transfer sites through the adjoining π-conjugated system in schiff bases of double-headed, fused salicylaldehydes. J. Org. Chem. 78, 9021–9031 (2013).
Shaw, S. & White, J. D. Asymmetric catalysis using chiral Salen–metal complexes: recent advances. Chem. Rev. 119, 9381–9426 (2019).
Zhang, W., Loebach, J. L., Wilson, S. R. & Jacobsen, E. N. Enantioselective epoxidation of unfunctionalized olefins catalyzed by salen manganese complexes. J. Am. Chem. Soc. 112, 2801–2803 (1990).
Cozzi, P. G. Metal–Salen Schiff base complexes in catalysis: practical aspects. Chem. Soc. Rev. 33, 410–421 (2004).
Li, L.-H. et al. Salen-based covalent organic framework. J. Am. Chem. Soc. 139, 6042–6045 (2017).
van Dijken, D. J., Kovaříček, P., Ihrig, S. P. & Hecht, S. Acylhydrazones as widely tunable photoswitches. J. Am. Chem. Soc. 137, 14982–14991 (2015).
Jankowska, J., Barbatti, M., Sadlej, J. & Sobolewski, A. L. Tailoring the Schiff base photoswitching – a non-adiabatic molecular dynamics study of substituent effect on excited state proton transfer. Phys. Chem. Chem. Phys. 19, 5318–5325 (2017).
Wezenberg, S. J. & Kleij, A. W. Material applications for Salen frameworks. Angew. Chem. Int. Ed. 47, 2354–2364 (2008).
Segura, J. L., Mancheño, M. J. & Zamora, F. Covalent organic frameworks based on Schiff-base chemistry: synthesis, properties and potential applications. Chem. Soc. Rev. 45, 5635–5671 (2016).
Kaur, M. et al. Post-synthetic modification of luminescent metal-organic frameworks using schiff base complexes for biological and chemical sensing. Coord. Chem. Rev. 449, 214214 (2021).
Xi, H. et al. All-visible-light-activated dithienylethenes induced by intramolecular proton transfer. J. Am. Chem. Soc. 141, 18467–18474 (2019).
Sheng, J. et al. Formylation boosts the performance of light-driven overcrowded alkene-derived rotary molecular motors. Nat. Chem. https://doi.org/10.1038/s41557-024-01521-0 (2024).
Deng, Y. et al. Acylhydrazine-based reticular hydrogen bonds enable robust, tough, and dynamic supramolecular materials. Sci. Adv. 8, eabk3286 (2022).
He, M. & Lehn, J.-M. Metal cation-driven dynamic covalent formation of imine and hydrazone ligands displaying synergistic co-catalysis and auxiliary amine effects. Eur. J. Chem. 27, 7516–7524 (2021).
Cvrtila, I., Fanlo-Virgos, H., Schaeffer, G., Monreal Santiago, G. & Otto, S. Redox control over acyl hydrazone photoswitches. J. Am. Chem. Soc. 139, 12459–12465 (2017).
Su, X. & Aprahamian, I. Hydrazone-based switches, metallo-assemblies and sensors. Chem. Soc. Rev. 43, 1963–1981 (2014).
Aprahamian, I. Hydrazone switches and things in between. Chem. Commun. 53, 6674–6684 (2017).
Qian, H. et al. Suppression of Kasha’s rule as a mechanism for fluorescent molecular rotors and aggregation-induced emission. Nat. Chem. 9, 83–87 (2017).
Runge, E. & Gross, E. K. U. Density-functional theory for time-dependent systems. Phys. Rev. Lett. 52, 997–1000 (1984).
Barone, V. & Cossi, M. Quantum calculation of molecular energies and energy gradients in solution by a conductor solvent model. J. Phys. Chem. A 102, 1995–2001 (1998).
Yanai, T., Tew, D. P. & Handy, N. C. A new hybrid exchange–correlation functional using the Coulomb-attenuating method (CAM-B3LYP). Chem. Phys. Lett. 393, 51–57 (2004).
Weigend, F. & Ahlrichs, R. Balanced basis sets of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn: design and assessment of accuracy. Phys. Chem. Chem. Phys. 7, 3297–3305 (2005).
Grimme, S., Ehrlich, S. & Goerigk, L. Effect of the damping function in dispersion corrected density functional theory. J. Comput. Chem. 32, 1456–1465 (2011).
Grimme, S., Hansen, A., Ehlert, S. & Mewes, J. M. r2SCAN-3c: A “Swiss army knife” composite electronic-structure method. J. Chem. Phys. 154, 064103 (2021).
Kalapos, P. P. et al. Salicylideneaniline/dithienylethene hybrid molecular switches: design, synthesis, and photochromism. J. Org. Chem. 89, 16–26 (2023).
Gasparro, F. P. & Kolodny, N. H. NMR determination of the rotational barrier in N,N-dimethylacetamide. a physical chemistry experiment. J. Chem. Educ. 54, 258 (1977).
Highet, R. J. & Chou, F.-T. E. The dependence of phenol-dienone tautomerism upon the hydrogen bonding characteristics of the solvent: 3,5-dipyrrolidinophenol. J. Am. Chem. Soc. 99, 3538–3539 (1977).
Joshi, H., Kamounah, F. S., van der Zwan, G., Gooijer, C. & Antonov, L. Temperature dependent absorption spectroscopy of some tautomeric azo dyes and Schiff bases. J. Chem. Soc., Perkin Trans. 2, 2303–2308 (2001).
Zhong, W. et al. Multi-site isomerization of synergistically regulated stimuli-responsive AIE materials toward multi-level decryption. Chem. Sci. 15, 3920–3927 (2024).
Wu, J., Kreimendahl, L., Tao, S., Anhalt, O. & Greenfield, J. L. Photoswitchable imines: aryliminopyrazoles quantitatively convert to long-lived Z-isomers with visible light. Chem. Sci. 15, 3872–3878 (2024).
Stindt, C. N. et al. Activating a light-driven molecular motor by metal complexation. Chem 9, 2337–2348 (2023).
Faulkner, A., van Leeuwen, T., Feringa, B. L. & Wezenberg, S. J. Allosteric regulation of the rotational speed in a light-driven molecular motor. J. Am. Chem. Soc. 138, 13597–13603 (2016).
Xie, H. et al. Phototriggered aggregation-induced emission and direct generation of 4D soft patterns. Adv. Mater. 33, e2105113 (2021).
Acknowledgements
Financial support from the Netherlands Organization for Scientific Research (NWO-CW), the Dutch Ministry of Education, Culture and Science (Gravitation program No.024.001.035), the China Scholarship Council (CSC PhD Fellowship No.201808330459 to J. S.). We thank Dr. Youxin Fu, Dr. Alexander Ryabchun, Dr. Wojciech Danowski, Dr. Jianyu Zhang and Yahan Shan from University of Groningen for their help to this project and fruitful discussions.
Author information
Authors and Affiliations
Contributions
S.V.V. and J.S. contributed equally to this work. J.S. and B.L.F. conceived the project. B.L.F. guided and supervised the research. S.V.V. and J.S. synthesized compounds, S.V.V. and J.S. led the project, and carried out all experimental studies and characterizations. C.N.S. performed computational studies. All authors discussed the results and commented on the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Bo Durbeej and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
van Vliet, S., Sheng, J., Stindt, C.N. et al. All-visible-light-driven salicylidene schiff-base-functionalized artificial molecular motors. Nat Commun 15, 6461 (2024). https://doi.org/10.1038/s41467-024-50587-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-50587-4
- Springer Nature Limited