Abstract
Cross-dehydrogenative coupling of C(sp3)-H bonds is an ideal approach for C(sp3)-C(sp3) bond construction. However, conventional approaches mainly rely on a single activation mode by either stoichiometric oxidants or electrochemical oxidation, which would lead to inferior selectivity in the reaction between similar C(sp3)-H bonds. Herein we describe our development of a paired electrocatalysis strategy to access an unconventional selectivity in the cross-dehydrogenative coupling of alcoholic α C(sp3)-H with allylic (or benzylic) C-H bonds, which combines hydrogen evolution reaction catalysis with hydride transfer catalysis. To maximize the synergistic effect of the catalyst combinations, a HER catalyst pentacoordinated Co-salen is disclosed. The catalyst displays a large redox-potential gap (1.98 V) and suitable redox potential. With the optimized catalyst combination, an electrochemical cross-dehydrogenative coupling protocol features unconventional chemoselectivity (C-C vs. C-O coupling), excellent functional group tolerance (84 examples), valuable byproduct (hydrogen), and high regio- and site-selectivity. A plausible reaction mechanism is also proposed to rationalize the experimental observations.
Similar content being viewed by others
Introduction
The development of approaches forming C(sp3)−C(sp3) bonds is a central topic in organic synthesis1,2,3,4,5 A strategy based on cross-dehydrogenative coupling (CDC) was initially unveiled by Li6,7,8, and it has been demonstrated as a robust and general tool for the construction of C(sp3)−C(sp3) bonds with hydrogen as the only byproduct. Conventional CDC approaches commonly involve stoichiometric oxidants and high temperature (Fig. 1a), which could result in some selectivity issues, including overoxidation, side reactions and undesired chemoselectivity. With the significant progress of synthetic electrochemistry9,10,11,12,13,14,15,16,17,18,19, it offers alternative choices20,21,22,23 for the redox chemistry by directly manipulating electron transfer between substrates and electrodes. Consequently, an impressive breakthrough has been achieved in the electrochemical CDC24,25. However, most of the electrochemical CDC approaches only involve anodic oxidation, and nucleophiles bearing reactive C(sp3)-H are commonly required (Fig. 1b). With a long-term interest26,27,28,29 in paired electrolysis30,31,32, we envisaged that merging anodic oxidation and cathodic reduction might enable a dual activation mode for the CDC reaction of unactivated C(sp3)-H bonds (Fig. 1c), which would otherwise be inaccessible either for the conventional CDC approach or electrochemical oxidative CDC.
The cross-dehydrogenative coupling of alcohols with allylic and benzylic C-H bonds could serve as a general and direct approach to upgrade simple alcohols to value-added alcohols. Nevertheless, previous reports for the transformation only afford C-O coupling products either with conventional33,34 or electrooxidative35 protocol due to the mismatch reactivity of the substrates (Fig. 2a); O-H is more acidic than C-H bond and it can be easily converted to an oxygen anion nucleophile. To reverse the chemoselectivity in the reaction, we herein reported a paired electrocatalysis36,37,38,39 strategy (Fig. 2b), which consists of a hydride transfer (H-T) catalyst40 and a hydrogen evolution reaction (HER) catalyst41,42,43,44,45,46,47,48,49,50 enabling a dual activation mode for both substrates. In the paired electrocatalytic system, the H-T catalyst could selectively remove hydride from alcohols to form aldehydes via carbocations, while the HER catalyst shifts the dissociation equilibrium of weak acidic C-H bonds to deliver hydrogen and carbanions, thus affording alkylated alcohols.
To establish an efficient paired electrocatalytic system, good compatibility of anodic and cathodic catalysts is the first concern. Active anodic and cathodic catalysts have opposite redox natures, and their mutual interference would result in deteriorated catalytic efficiency. As shown in the Fig. 2c, the undesired reaction between the active species AM+• and CM−•, which respectively arise from the anodic mediator (AM) and cathodic mediator (CM), would directly reduce the overall catalytic efficiency. In this work, a pentacoordinated Co(II)-salen catalyst was demonstrated as a stable HER catalyst with a large redox potential gap and suitable oxidation potential. By cooperating with a common hydride transfer (H-T) catalyst 2,2,6,6-tetramethylpiperidoxyl (TEMPO), the pentacoordinated Co(II)-salen catalyst unlocks an unconventionally chemoselective CDC reaction of alcohols with allylic and benzylic C-H bonds to open up a general platform upgrading alcohols (Fig. 2d). This paired electrocatalytic protocol features high chemo-, stereo- and regioselectivity, excellent functional-group tolerance (>80 examples) and mild conditions.
Results
The evaluation of HER catalysts
To better understand the relationship of structure and redox properties, we initially synthesized a series of CoII-salen51,52 HER catalysts cat 1-cat 8 (Fig. 3a). The structure of pentacoordinated catalyst was unambiguously established by single crystal diffraction analysis of cat 1 (Fig. 3b) (Deposition number 2313154 (for cat 1) contains the supplementary crystallographic data for this paper. These data are provided free of charge by Cambridge Crystallographic Data Centre.), and it shows that cobalt center is shielded by a roof-like nitrogen coordination site, which would significantly enhance its stability. The redox property of the catalysts was next explored to support the above speculation. We recorded and identified all of the redox peaks of catalysts arising from the process of CoIII/CoII53,54 and CoII/CoI (Fig. 3c). As expected, pentacoordinated catalysts (cat 1-cat 3, 1.98–1.92 V) have uniformly larger redox potential gap than that of the conventional catalysts cat 4-cat 8 (1.14–1.40 V). This result verifies that pentacoordinated Co-salen catalysts are more stable under oxidation and reduction compared with their tetracoordinated counterparts. Noteworthy, CF3 group was found to significantly improve the antioxidation stability of cat 1 with the most positive peak (CoIII/CoII) at −0.157 V (vs. Fc/Fc+). This redox property endows cat 1 with good compatibility with the aforementioned cocatalyst TEMPO (HT-1). Moreover, we also compared the anodic oxidation of cat 1 (−0.157 V) with that of HT-1 (0.195 V); the narrow potential difference55 made it possible to use cat 1 to facilitate the oxidation HT-1. Further cyclic voltammetry experiment mixing cat 1 with HT-1 confirms the above conclusion by detecting an obvious increase of the anodic peak of cat 1 (Fig. 3d). Nevertheless, other cobalt catalysts failed to produce the same results when mixing with HT-1. Taken together, cat 1 showed good compatibility with the H-T catalyst HT-1. The synergistic effect of the catalyst combination was demonstrated by the acceleration effect of cat 1 on the oxidation of HT-156.
Reaction optimization
Encouraged by the redox property study, we next investigated the cross-coupling reaction between benzyl alcohol (1a) and allylbenzene (2a) with various catalyst combinations. We screened catalysts using Cs2CO3 as base additive, nBu4NClO4 as electrolyte, N,N-dimethylformamide (DMF) as solvent, graphite felt and copper plate as anode and cathode, respectively. As shown in Table 1, a suitable catalyst combination is crucial for the reaction efficiency in terms of yields (Entries 1–11). The optimal catalyst combination was identified with cat 1 as HER catalyst and HT-1 as H-T catalyst, and the desired C-C coupling product 3a was obtained in 85% yield with exclusive C-C coupling and C=C position isomerizing selectivity. By comparing the yields arising from other catalyst combinations (Supplementary Table 2), we concluded that the HER catalyst with a large potential gap and the H-T catalyst with a low oxidation peak would benefit the reaction performance. The necessity of both catalysts was also supported by the control experiments removing either of the catalysts (Entries 12–14). We also highlighted the superiority of this electrochemical protocol when compared to conventional CDC conditions (Entry 15, see Supplementary Table 3 for details).
Exploration of scope
With the optimal reaction conditions in hand, a wide range of substrates bearing weakly acidic C(sp3)-H were investigated to couple with benzyl alcohol 1a (Fig. 4). Initially, we examined a series of toluene derivatives, and the desired C-C coupling products (3b–3i) were obtained with moderate yield. Notably, bioactive amide and sulfonamide substrates (3e, 3h–3i) bearing reactive α C-H were well-tolerated. Moreover, 4-methylbenzophenone was also amenable to give the corresponding product 3f, which conventionally preferred to proceed a pinacol coupling of 4-methylbenzophenone. To our delight, a mixture of β-methylstyrene isomers can be directly used as substrate to afford corresponding products with high E/Z selectivity (3j, 3k). Besides the benzylic and allylic C(sp3)-H, (methylsulfinyl)benzene proved to be suitable to give the desired product 3l. Subsequently, various allylbenzene derivatives were tested in the electrochemical protocol. Substrates with multiple double bonds (3m) or different substitution patterns (3n–3q) are all well-tolerated to deliver the terminal C-H coupling products with exclusive position-isomerizing selectivity and E/Z selectivity. The site-selectivity of the electrochemical approach was also demonstrated by the case of 3r, and more acidic C-H is favored in the reaction. This cross-coupling reaction also enabled a late-stage functionalization for the natural product Magnolol and Eugenol-derived substrates (3s–3t). Specifically, both allyl groups underwent isomerization to give a mono-coupling product 3s (as shown in the Fig. 4). Additionally, we investigated the electronic effect (3u–3ad) and position of substituents (3ae–3ag), fused ring (3ah–3ai) and heterocycle (3aj). Uniformly good yields were observed for the substrates, although the thienyl group led to diminished E/Z selectivity. It is noteworthy that radical-sensitive groups such as cyclopropyl (3p, 3x) and ortho-vinyl (3ag) were untouched during the electrochemical transformation, ruling out the possible radical pathway. Finally, toluene, 4-methyl anisole, hexene, and 4-phenyl-1-butene proved to be failed substrates in the reaction due to their less acidic C-H bonds.
To further demonstrate the generality of the electrochemical cross-coupling reaction, we next tested a broad range of alcohols (Fig. 5). In general, variations on the electronic property (3ak–3bg) and substitution pattern (3bh–3bq) of benzyl alcohols are well tolerated. Electron-deficient substrates (3as–3ay) with higher oxidation potential proved to be less efficient compared with the electron-rich alcohols (3ak–3ar). The functional-group tolerance of this approach was highlighted by the cases of 3az–3be, which commonly cannot survive under conventional CDC conditions. Furthermore, site-selectivity favoring less-hindered benzylic C-H was observed in the substrates containing two hydroxyl groups (3bf–3bg). Other aromatic (3br–3bw), aliphatic (3bx–3cb), secondary (3cc–3cd) and bioactive molecule (amylcinnamyl alcohol, Adapalene) derived alcohols (3ce–3cf) were also found to be suitable substrates to afford corresponding products with synthetically useful yields. Alcohols bearing cyclopropyl group gave the desired products 3bx–3by. The possible radical-initiated ring expansion byproducts were not detected in the reaction mixture, further excluding the radical pathway in the transformation.
Applications in synthesis
Having examined the reaction generality, we turned our attention to probing the utility of our electrochemical protocol with gram-scale reaction and derivatization of products (Fig. 6). Gratifyingly, scaling up the model reaction to gram-scale afforded product 3a in a satisfactory yield (70%) even with lower catalyst loading (Fig. 6a). The byproduct, that is, the gaseous hydrogen was successfully collected using a balloon and verified with GC. This result suggests that protocol not only provides a route for organic transformation but also enables an avenue for hydrogen. Using a simple solar cell as an electricity supply largely maintained the reaction efficiency (Fig. 6b). Under acidic conditions, the dehydration of homoallylic alcohol 3m gives a conjugated light-emitting molecule 4 (Fig. 6c), which displayed prominent luminescent properties both in solution and solid state with a maximum emission peak at 493 nm. Additionally, bioactive tetrahydrofuran product 5 was also accessed in high yield via N-iodosuccinimide (NIS)-initiated iodocyclization.
Mechanism investigation
To gain insight into the reaction mechanism, we conducted a series of cyclic voltammograms and control experiments (Fig. 7). First, the electrochemical properties of 1a and 2a were investigated (Fig. 7a, b). As shown in Fig. 7a, both 1a and 2a seem to be redox inert within the window of −2.5–2.5 V (vs. Fc/Fc+). After enlarging the range from −0.5 to −2.5 V, a couple of small waves (10−6 ~ 10−5 A) were detected at −2.04 V, which were attributed to the hydrogen atom absorption and desorption process in HER (see Supplementary Fig. 26 for GC detection of H2). Moreover, their intensity increases with the concentration of 2a. These observations illustrate that both substrates are relatively unactive in the absence of catalysts. Second, the catalytic role of cat 1 and HT-1 was explored (Fig. 7c, d). Treatment of cat 1 with excess 2a led to significant increases in both cathodic peaks of 2a and CoII/CoI; this observation verifies the catalytic role of cat 1 in the HER of 2a. On the other hand, mixing HT-1 with benzyl alcohol 1a also resulted in an obvious catalytic current, suggesting the catalysis of HT-1 in the oxidation of 1a. The titration experiments (Supplementary Figs. 24 and 25) were also conducted to further verify the catalytic role of cat 1 and HT-1 in the reaction. Third, we conducted control experiments to elucidate the necessity of both electrode reactions (Fig. 7e). In a divided cell, no desired coupling product 3a was observed (Eq (a)), while benzaldehyde was detected in the anodic chamber, and a possible allylbenzene carbanion (see Supplementary Fig. 32 for its ultraviolet–visible spectra) was proposed in the cathodic chamber. Further replacing HT-1 with stoichiometric oxidant 2,2,6,6-tetramethyl-1-oxopiperidinium tetrafluoroborate only afforded benzaldehyde (Eq (b)). These results exclude the mechanism which only relies on anodic oxidation. The kinetic isotope effect (KIE) study was also investigated with intramolecular competition and parallel experiment57, and it reveals that the oxidation of 1a is the rate-determining step (RDS, Eq (c)-(d)).
On the basis of the above experimental observations and related mechanism reports40,47,48,49, a plausible reaction mechanism is proposed (Fig. 7f). Under anodic oxidation, pentacoordinated CoII-salen (cat 1) is first oxidized to CoIII species, which can subsequently initiate the oxidation of HT-1 via single electron transfer (SET). The in situ generated reactive species A abstracts a hydride from 1a to regenerate a protonated TEMPO (B) and deliver cation C, which rapidly converts to benzaldehyde D with the conjugation effect of the oxygen atom. On the other hand, the deprotonation of weakly acidic substrates is promoted by the CoI species arising at the cathode from cat 1, and position-isomerized carbanion E is simultaneously generated along with hydrogen byproduct. Direct reaction between D and E affords the dehydrogenative product 3a.
Discussion
In summary, we have developed a paired electrocatalysis strategy leading to an unconventionally chemoselective cross-dehydrogenative coupling of alcohols with allylic and benzylic C-H bonds. The paired electrocatalysis consisting of H-T and HER catalysts enables a dual activation for alcohols and weakly acidic C-H substrates, respectively. The success of this strategy largely relies on a pentacoordinated CoII-salen HER catalyst, and it shows unmatched compatibility with the H-T catalyst owing to its large redox-potential gap and suitable oxidative property. With the catalyst combinations, unconventional C(sp3)-C(sp3) coupling products are readily accessed along with hydrogen. The further application of the paired electrocatalysis strategy in challenging transformations has been actively explored in our laboratory.
Methods
General procedure for electrochemical CDC reaction
An undivided cell was equipped with a magnet stirrer, copper plate (1.8 *1.5 cm2), and graphite felt (1.8 *1.5 cm2), as cathode and anode, respectively (the electrolysis setup is shown in Supplementary Fig. 28). The substrate benzyl alcohol (52 µL, 0.5 mmol), allylbenzene 2a (199 µL, 1.5 mmol), Cs2CO3 (31 mg, 0.1 mmol), cat 1 (14 mg, 0.025 mmol), TEMPO (16 mg, 0.1 mmol) and nBu4NClO4 (341 mg, 1.0 mmol) were added to the solvent DMF (10 mL). The resulting mixture was allowed to stir and electrolyze under constant current conditions (20 mA, J = 7.4 mA•cm−2) at 0 °C for 4 h. The reaction mixture was subsequently poured into water (100 mL) and extracted with ethyl acetate (40 mL × 3). The combined organic phases were washed with saturated brine solution (100 mL). The volatile solvent was then removed with a rotary evaporator, and the residue was purified by column chromatography (PE/EA = 8/1-5/1, v/v) on silica gel to afford the desired product 3a (95 mg) in 85 % yield.
Data availability
All data supporting the findings of this study, including experimental details, spectroscopic characterization data for all compounds are available in the text and the Supplementary Information section, or from the corresponding author upon request. Crystallographic data for the structure reported in this Article have been deposited at the Cambridge Crystallographic Data Centre, under deposition numbers CCDC 2313154 (cat 1). Copies of the data can be obtained free of charge via https://www.ccdc. cam.ac.uk/structures/.
References
Corey, E. J. & Cheng, X. M. The Logic of Chemical Synthesis, pp. 1‒91(John Wiley & Sons,1989).
Zhang, S.-Y., Zhang, F.-M. & Tu, Y.-Q. Direct Sp3 α C–H activation and functionalization of alcohol and ether. Chem. Soc. Rev. 40, 1937–1949 (2011).
Chen, Z. et al. Catalytic alkylation of unactivated C(sp3)–H bonds for C(sp3)–C(sp3) bond formation. Chem. Soc. Rev. 48, 4921–4942 (2019).
Pitre, S. P., Weires, N. A. & Overman, L. E. Forging C(sp3)–C(sp3) Bonds with Carbon-Centered Radicals in the Synthesis of Complex Molecules. J. Am. Chem. Soc. 141, 2800–2813 (2019).
Lei, C. & Zhou, Q. Advances on Nickel-Catalyzed C(sp3)-C(sp3) Bond Formation. Acta Chim. Sin. 78, 1017–1029 (2020).
Li, C.-J. Cross-Dehydrogenative Coupling (CDC): Exploring C−C Bond Formations beyond Functional Group Transformations. Acc. Chem. Res. 42, 335–344 (2009).
Girard, S. A., Knauber, T. & Li, C.-J. The Cross-Dehydrogenative Coupling of Csp3-H Bonds: A Versatile Strategy for C−C Bond Formations. Angew. Chem. Int. Ed. 53, 74–100 (2014).
Tian, T., Li, Z. & Li, C.-J. Cross-dehydrogenative coupling: a sustainable reaction for C–C bond formations. Green. Chem. 23, 6789–6862 (2021).
Yan, M., Kawamata, Y. & Baran, P. S. Synthetic organic electrochemical methods since 2000: on the verge of a renaissance. Chem. Rev. 117, 13230–13319 (2017).
Jiang, Y., Xu, K. & Zeng, C.-C. Use of electrochemistry in the synthesis of heterocyclic structures. Chem. Rev. 118, 4485–4540 (2018).
Yoshida, J.-i, Shimizu, A. & Hayashi, R. Electrogenerated cationic reactive intermediates: the pool method and further advances. Chem. Rev. 118, 4702–4730 (2018).
Moeller, K. D. Using physical organic chemistry to shape the course of electrochemical reactions. Chem. Rev. 118, 4817–4833 (2018).
Waldvogel, S. R., Lips, S., Selt, M., Riehl, B. & Kampf, C. J. Electrochemical arylation reaction. Chem. Rev. 118, 6706–6765 (2018).
Yuan, Y. & Lei, A. Electrochemical oxidative cross-coupling with hydrogen evolution reactions. Acc. Chem. Res. 52, 3309–3324 (2019).
Xiong, P. & Xu, H.-C. Chemistry with electrochemically generated N-centered radicals. Acc. Chem. Res. 52, 3339–3350 (2019).
Jiao, K.-J., Xing, Y.-K., Yang, Q.-L., Qiu, H. & Mei, T.-S. Site-Selective C–H functionalization via synergistic use of electrochemistry and transition metal catalysis. Acc. Chem. Res. 53, 300–310 (2020).
Gandeepan, P., Finger, L. H., Meyer, T. H. & Ackermann, L. 3d metallaelectrocatalysis for resource economical syntheses. Chem. Soc. Rev. 49, 4254–4272 (2020).
Novaes, L. F. T. et al. Electrocatalysis as an Enabling Technology for Organic Synthesis. Chem. Soc. Rev. 50, 7941–8002 (2021).
Cheng, X. et al. Recent Applications of Homogeneous Catalysis in Electrochemical Organic Synthesis. CCS Chem. 4, 1120–1152 (2022).
Zhang, W. et al. Electrochemically driven cross-electrophile coupling of alkyl halides. Nature 604, 292–297 (2022).
Zhang, B. et al. Ni-electrocatalytic Csp3–Csp3 doubly decarboxylative coupling. Nature 606, 313–318 (2022).
Chen, M., Wu, Z.-J., Song, J. & Xu, H.-C. Electrocatalytic Allylic C−H Alkylation Enabled by a Dual-Function Cobalt Catalyst. Angew. Chem. Int. Ed. 61, e202115954 (2022).
Li, P., Kou, G., Feng, T., Wang, M. & Qiu, Y. Electrochemical NiH-Catalyzed C(sp3)−C(sp3) Coupling of Alkyl Halides and Alkyl Alkenes. Angew. Chem. Int. Ed. 62, e202311941 (2023).
Tang, S., Liu, Y. & Lei, A. Electrochemical Oxidative Cross-coupling with Hydrogen Evolution: A Green and Sustainable Way for Bond Formation. Chem 4, 27–45 (2018).
Röckl, J. L., Pollok, D., Franke, R. & Waldvogel, S. R. A Decade of Electrochemical Dehydrogenative C,C-Coupling of Aryls. Acc. Chem. Res. 53, 45–61 (2020).
Zhang, S. et al. Electrochemical Arylation of Aldehydes, Ketones, and Alcohols: from Cathodic Reduction to Convergent Paired Electrolysis. Angew. Chem. Int. Ed. 60, 7275–7282 (2021).
Zhang, S. et al. Catalyst-Dependent Direct and Deoxygenative Coupling of Alcohols by Convergent Paired Electrolysis. CCS Chem. 4, 1938–1948 (2022).
Zhang, S. & Findlater, M. Progress in Convergent Paired Electrolysis. Chem. Eur. J. 28, e202201152 (2022).
Li, F., Liang, Y., Zhan, X., Zhang, S. & Li, M.-B. Electricity-driven redox-neutral C(sp3)–H amidation with N-alkoxyamide as an amidating reagent. Org. Chem. Front. 9, 5571–5577 (2022).
Aust, N., & Kirste, A. Paired electrosynthesis. In Encyclopedia of Applied Electrochemistry, 1505–1510 (Springer, New York, 2014).
Llorente, M. J., Nguyen, B. H., Kubiak, C. P. & Moeller, K. D. Paired Electrolysis in the Simultaneous Production of Synthetic Intermediates and Substrates. J. Am. Chem. Soc. 138, 15110–15113 (2016).
Wu, T. & Moeller, K. D. Organic Electrochemistry: Expanding the Scope of Paired Reactions. Angew. Chem. Int. Ed. 60, 12883–12890 (2021).
Li, C. et al. Palladium-Catalyzed Aerobic Oxygenation of Allylarenes. J. Org. Chem. 82, 10912–10919 (2017).
Nelson, T. A. F. & Blakey, S. B. Intermolecular Allylic C−H Etherification of Internal Olefins. Angew. Chem. Int. Ed. 57, 14911–14915 (2018).
Xiong, P. et al. Site-selective electrooxidation of methylarenes to aromatic acetals. Nat. Commun. 11, 2706 (2020).
Zhang, P. et al. Paired Electrocatalytic Oxygenation and Hydrogenation of Organic Substrates with Water as the Oxygen and Hydrogen Source. Angew. Chem. Int. Ed. 58, 9155–9159 (2019).
Vantourout, J. C. From Bench to Plant: An Opportunity for Transition Metal Paired Electrocatalysis. Org. Process Res. Dev. 25, 2581–2586 (2021).
Yang, G. et al. Unraveling the mechanism for paired electrocatalysis of organics with water as a feedstock. Nat. Commun. 13, 3125 (2022).
Zong, L., Xiang, S., Sun, R. & Lu, Q. Selective C(sp3)–H arylation/alkylation of alkanes enabled by paired electrocatalysis. Nat. Commun. 14, 7992 (2023).
Wang, F. & Stahl, S. S. Electrochemical Oxidation of Organic Molecules at Lower Overpotential: Accessing Broader Functional Group Compatibility with Electron−Proton Transfer Mediators. Acc. Chem. Res. 53, 561–574 (2020).
Conway, B. E. & Tilak, B. V. Interfacial processes involving electrocatalytic evolution and oxidation of H2, and the role of chemisorbed H. Electrochim. Acta 47, 3571–3594 (2002).
Marinescu, S. C., Winkler, J. R. & Gray, H. B. Molecular mechanisms of cobalt-catalyzed hydrogen evolution. Proc. Natl Acad. Sci. USA 109, 15127–15131 (2012).
McKone, J. R., Marinescu, S. C., Brunschwig, B. S., Winkler, J. R. & Gray, H. B. Earth-abundant hydrogen evolution electrocatalysts. Chem. Sci. 5, 865–878 (2014).
Jiao, Y., Zheng, Y., Jaroniec, M. & Qiao, S. Z. Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions. Angew. Chem. Int. Ed. 54, 52–65 (2014).
Queyriaux, N., Jane, R. T., Massin, J., Artero, V. & Chavarot-Kerlidou, M. Recent developments in hydrogen evolving molecular cobalt (II)–polypyridyl catalysts. Coord. Chem. Rev. 304, 3–19 (2015).
Zhao, G., Rui, K., Dou, S. X. & Sun, W. Heterostructures for Electrochemical Hydrogen Evolution Reaction: A Review. Adv. Funct. Mater. 28, 1803291 (2018).
Gnaim, S. et al. Cobalt-electrocatalytic HAT for functionalization of unsaturated C–C bonds. Nature 605, 687–695 (2022).
Wu, X. et al. Intercepting Hydrogen Evolution with Hydrogen-Atom Transfer: Electron-Initiated Hydrofunctionalization of Alkenes. J. Am. Chem. Soc. 144, 17783–17791 (2022).
Zhang, S. et al. Electrochemically Generated Carbanions Enable Isomerizing Allylation and Allenylation of Aldehydes with Alkenes and Alkynes. J. Am. Chem. Soc. 145, 14143–14154 (2023).
Zhang, S. & Findlater, M. Electrochemically Driven Hydrogen Atom Transfer Catalysis: A Tool for C(sp3)/Si–H Functionalization and Hydrofunctionalization of Alkenes. ACS Catal. 13, 8731–8751 (2023).
Song, L. et al. Dual electrocatalysis enables enantioselective hydrocyanation of conjugated alkenes. Nat. Chem. 12, 747–754 (2020).
Yang, F. et al. Electrocatalytic Oxidative Hydrofunctionalization Reactions of Alkenes via Co(II/III/IV) Cycle. ACS Catal. 12, 2132–2137 (2022).
Sauermann, N., Meyer, T. H., Tian, C. & Ackermann, L. Electrochemical Cobalt-Catalyzed C−H Oxygenation at Room Temperature. J. Am. Chem. Soc. 139, 18452–18455 (2017).
Gao, X., Wang, P., Zeng, L., Tang, S. & Lei, A. Cobalt(II)-Catalyzed Electrooxidative C−H Amination of Arenes with Alkylamines. J. Am. Chem. Soc. 140, 4195–4199 (2018).
Francke, R. & Little, R. D. Redox catalysis in organic electrosynthesis: basic principles and recent developments. Chem. Soc. Rev. 43, 2492–2521 (2014).
Badalyan, A. & Stahl, S. S. Cooperative electrocatalytic alcohol oxidation with electron-proton-transfer mediators. Nature 535, 406–410 (2016).
Simmons, E. M. & Hartwig, J. F. On the Interpretation of Deuterium Kinetic Isotope Effects in C–H Bond Functionalizations by Transition-Metal Complexes. Angew. Chem. Int. Ed. 51, 3066–3072 (2012).
Acknowledgements
This work was supported by the National Natural Science Foundation of China (21702113 to S.Z., and 92061110 to M.-B.L.), the Anhui University (S020318006/069 to S.Z., and S020118002/113 to M.-B.L.), and the Anhui Provincial Natural Science Foundation (2308085Y14 to S.Z., and 2108085Y05 to M.-B.L.).
Author information
Authors and Affiliations
Contributions
S.Z. and M.-B.L. conceived the project, designed the experiments and wrote the manuscript. K.L., M.L., X.L. and X.Z. performed the experimental work. K.L. and M.L. contributed equally for this work. Refinement and analysis of single-crystal data was conducted by Y.Z. and W.F. All authors discussed the results and commented on the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Youai Qiu and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Liu, K., Lei, M., Li, X. et al. Paired electrocatalysis unlocks cross-dehydrogenative coupling of C(sp3)-H bonds using a pentacoordinated cobalt-salen catalyst. Nat Commun 15, 2897 (2024). https://doi.org/10.1038/s41467-024-47220-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-47220-9
- Springer Nature Limited