Abstract
Spins associated to optically accessible solid-state defects have emerged as a versatile platform for exploring quantum simulation, quantum sensing and quantum communication. Pioneering experiments have shown the sensing, imaging, and control of multiple nuclear spins surrounding a single electron spin defect. However, the accessible size of these spin networks has been constrained by the spectral resolution of current methods. Here, we map a network of 50 coupled spins through high-resolution correlated sensing schemes, using a single nitrogen-vacancy center in diamond. We develop concatenated double-resonance sequences that identify spin-chains through the network. These chains reveal the characteristic spin frequencies and their interconnections with high spectral resolution, and can be fused together to map out the network. Our results provide new opportunities for quantum simulations by increasing the number of available spin qubits. Additionally, our methods might find applications in nano-scale imaging of complex spin systems external to the host crystal.
Similar content being viewed by others
Introduction
Optically interfaced spin qubits associated to defects in solids provide a versatile platform for quantum simulation1, quantum networks2,3 and quantum sensing4,5,6. Various systems are being explored7, including defects in diamond1,2,3,8,9, silicon carbide10,11, silicon12,13, hexagonal boron nitride (hBN)14, and rare-earth ions15. The defect electron spin provides a qubit with high-fidelity control, optical initialization and readout, and a (long-range) photonic quantum network interface2,3. Additionally, the electron spin can be used to sense and control multiple nuclear spins surrounding the defect15,16,17. This additional network of coupled spins provides a qubit register for quantum information processing, as well as a test bed for nano-scale magnetic resonance imaging18,19,20,21,22,23. Examples of emerging applications are quantum simulations of many-body physics1,24,25,26,27, as well as quantum networks2,3, where the nuclear spins provide qubits for quantum memory28, entanglement distillation29, and error correction30,31,32.
State-of-the-art experiments have demonstrated the imaging of spin networks containing up to 27 nuclear spins18,19,33,34,35. The ability to map larger spin networks can be a precursor for quantum simulations that are currently intractable, would provide a precise understanding of the noise environment of spin-qubit registers32,36,37, and might contribute towards efforts to image complex spin systems outside of the host material20,21,22,23,38,39. A key open challenge for mapping larger networks is spectral crowding, which causes overlapping signals and introduces ambiguity in the assignment of signals to individual spins and the interactions between them.
Here, we develop correlated sensing sequences that measure both the network connectivity as well as the characteristic spin frequencies with high spectral resolution. We apply these sequences to map a 50-nuclear-spin network comprised of 1225 spin-spin interactions in the vicinity of a nitrogen-vacancy (NV) center in diamond. The key concept of our method is to concatenate double-resonance sequences to measure chains of coupled spins through the network. The mapping of spin chains removes ambiguity about how the spins are connected and enables the sensing of spins that are farther away from the electron spin-sensor in spectrally crowded regions. These results significantly increase the size and complexity of the accessible spin network. Additionally, our methods are applicable to a wide variety of systems and might inspire future methods to magnetically image complex samples such as individual molecules or proteins22,33,39.
Results
Spin-network mapping
We consider a network of N-coupled nuclear spins in the vicinity of a single electron spin that acts as a quantum sensor18,19. The effective dynamics of the nuclear-spin network, with an external magnetic field along the z-axis, are described by the Hamiltonian (see Supplementary Note 1):
where \(\, {\hat{\! I}\, }_{{{{{{{{\rm{z}}}}}}}}}^{(i)}\) denotes the nuclear Pauli spin-\(\frac{1}{2}\) operator for spin i, Ai are the precession frequencies associated with each spin, and Cij denotes the nuclear-nuclear coupling between spin i and j. The frequencies Ai might differ due to differences in species (gyromagnetic ratio), the local magnetic field and spin environment, and due to coupling to the sensor electron spin. Our goal is to extract the characteristic spin frequencies Ai and spin-spin couplings Cij that capture the structure of the network.
Figure 1 shows an example network, with colored disks denoting frequency regions, and numbered dots inside signifying spins at these frequencies. Although in principle all spins are coupled to all spins, we draw edges only for strong, resolvable, spin-spin couplings, defined by: Cij ≳ 1/T2, where T2 is the nuclear Hahn-echo coherence time (∼0.5 s)16. The network connectivity constitutes the presence (or absence) of such resolvable couplings. In general, the number of frequency disks is smaller than the number of spins, as multiple spins might occupy the same frequency region (i.e., overlap in frequency).
Graph representing a spin network, where vertices denote spins and edges denote spin-spin interactions (Cij). Spins are distributed among spectral regions (colored disks) by their precession frequency (Ai). a If all spin frequencies are unique (one spin in each disk), the network can be mapped by measuring only pairwise interactions (C12) between frequencies (A1, A2). b If spins spectrally overlap (e.g., spins 2 and 5 with A2 ≈ A5) due to the finite linewidth set by the dephasing time \({T}_{2}^{\star }\), pairwise measurements alone are ambiguous when assigning interactions to specific spins. By measuring chains (e.g., through A1, A2, A3) we directly retrieve the connectivity of the network. c We also exploit spin chains to measure interactions between spins that are otherwise challenging to access. As an example, couplings belonging to Spin 4 are not directly accessible from the spin at A1 - due to spectral crowding or negligible couplings - but can be obtained through a chain. d Finally, we complement the spin chains with a correlated double-resonance method that enhances the spectral resolution for the spin-frequency shifts (Δi) from \(\sim 1/{T}_{2}^{\star }\) to ∼1/T2, so that spectrally overlapping spins can also be resolved directly. This figure shows a conceptual network with vertices organized in frequency space. In Supplementary Fig. 1, we discuss the specific relations between frequency and spatial position for the experimental system considered here: an NV center in diamond and surrounding 13C-spin network, for which increased spectral crowing (panels b–d) naturally occurs for 13C spins that are farther away from the NV center.
State-of-the-art spin network mapping relies on isolating individual nuclear-nuclear interactions through spin-echo double resonance (SEDOR)18. Applying simultaneous echo pulses at frequencies Ai and Aj preserves the interaction Cij between spins at Ai and Aj, while decoupling them from (quasi-static) environmental noise and the rest of the network so that the coupling Cij is encoded in the nuclear-spin polarization with high spectral resolution (set by the nuclear T2-time rather than \({T}_{2}^{\star }\)-time). The signal is acquired by mapping the resulting nuclear-spin polarization, for example at frequency Ai, on the NV electron spin and reading it out optically16. Such a measurement yields a correlated list of three frequencies {Ai, Cij, Aj} (Fig. 1a). If all spins are spectrally isolated so that the Ai do not overlap, these pairwise measurements completely characterize the network.
However, due to their finite spectral line widths (set by \(1/{T}_{2}^{\star }\)), multiple spin frequencies Ai may overlap (indicated by multiple spins occupying a disk). This introduces ambiguity when assigning measured couplings to specific spins in the network, and causes complex overlapping signals, which are difficult to resolve and interpret18,19. Figure 1b shows an example where pairwise measurements break down; spins 2 and 5 overlap in frequency (A2 ≈ A5). Applying pairwise SEDOR between frequencies A1, A3, A4 and a frequency that overlaps with A2 and A5 returns three independent pairwise correlations: {A1, C12, A2}, {A3, C23, A2} and {A4, C45, A5}. Crucially, however, such measurements cannot distinguish this uncoupled 2-spin and 3-spin chain (Fig. 1b) from a single 4-spin network (with a single central spin at A2), nor from a network of 3 uncoupled 2-spin chains (three spectrally overlapping spins). Without introducing additional a-priori knowledge or assumptions about the system, pairwise measurements cannot be assigned to specific spins and are thus insufficient to reconstruct the network18.
Our approach is to measure connected chains through the network and combine these with high-resolution spin-frequency measurements. First, spin-chain sensing (detailed in the “Spin-chain sensing” section) correlates multiple frequencies and spin-spin couplings, directly accessing the underlying network connectivity, and thus reducing ambiguity due to (potential) spectral overlap. Consider the previous example: by probing the correlation between the three frequencies A1, A2, and A3 in a single measurement, we directly reveal that Spin 1 and Spin 3 are connected to the same spin at A2 (Spin 2). Such a spin-chain measurement yields a correlated list of 5 frequencies: {A1, C12, A2, C23, A3}, characterizing the 3-spin chain. Applying the same method but now with spin 4 (A3 ← A4) reveals that it is not connected to Spin 2, but couples to another spin (spin 5) that overlaps in frequency with Spin 2.
Second, spin-chain sensing enables measuring couplings that are otherwise challenging to access, enabling exploration further into the network. Consider the case where starting from some spin (e.g. Spin 1 in Fig. 1c) it is challenging to probe a part of the network, either because the couplings to Spin 1 are too weak to be observed or spectral crowding causes signals to overlap. The desired interactions (e.g. those belonging to Spin 4 in Fig. 1c) can be reached by constructing a spin chain, in which each link is formed by a strong and resolvable spin-spin interaction. The chain iteratively unlocks new spins that can be used as sensors of their own local spatial environment.
Finally, we combine the spin-chain measurements with a correlated double-echo spectroscopy scheme that increases the resolution with which different Ai are distinguished from \(\sim 1/{T}_{2}^{\star }\) to ∼1/T2 (Fig. 1d). This directly reduces spectral overlap of spin frequencies, further removing ambiguity.
In principle, the entire network can be mapped by expanding and looping a single chain. In practice, measuring limited-size chains is sufficient. An N-spin-chain measurement yields a correlated list of N spin frequencies A, alongside N − 1 coupling frequencies C, which quickly becomes uniquely identifiable, even when some spin frequencies in the network are degenerate. This allows for the merging of chains that share a common section to reconstruct the network (see “Methods” section).
Experimental system
We demonstrate these methods on a network of 50 13C spins surrounding a single NV center in diamond at 4 K. The NV electron spin is initialized and measured optically and is used as the sensor spin18. We employ dynamical decoupling sequences to sense nuclear spins at selected frequency bands, using sequences with and without radio-frequency driving (DDRF) of the nuclear spins to ensure sensitivity in all directions from the NV (see “Methods” section)16,18. The nuclear spins are polarized via the electron spin, using global dynamical-nuclear-polarization techniques (PulsePol sequence1,40), or by selective projective measurements or SWAP gates16,18.
The 13C nuclear-spin frequencies are given by Ai = ωL + msΔi, with ωL the global Larmor frequency and Δi a local shift due to the hyperfine interaction with the NV center (see for example ref. 41 and Supplementary Note 1). Here, we neglected corrections due to the anisotropy of the hyperfine interaction, which are treated in Supplementary Note 4. The experiments are performed with the electronic spin in the ms = ±1 states. Because, for the spins considered, Δi is typically two to three orders of magnitude larger than the nuclear-nuclear couplings Cij, nuclear-spin flip-flop interactions are largely frozen, and Eq. (1) applies (Supplementary Note 1).
In the NV-nuclear system, spectral crowding forms a natural challenge for determining the spin network structure. The spin frequencies are broadened by the inhomogeneous linewidth \(\sim 1/{T}_{2}^{\star }\), which is mainly set by the coupling to all other nuclear spins. A limited number of nuclear spins close to the NV center are spectrally isolated (defined as: \(| {A}_{i}-{A}_{j}| \, > \, 1/{T}_{2}^{\star }\,\,\forall \,\,j\,\)), making them directly accessible with electron-nuclear gates16,18, and making pairwise measurements sufficient to map the interactions. However, the hyperfine interaction, and thus Δi, decreases with distance (∼r−3), resulting in an increasing spectral density for lower Δi (larger distance). Interestingly, there exists a spectrally crowded region (\(| {A}_{i}-{A}_{j}| \, < \, 1/{T}_{2}^{\star }\)) for which nuclear spins still do not couple strongly to other spins in the same spectral region (Cij ≲ 1/T2 ∀ j ), for example when they are on opposite sides of the NV center. Contrary to previous work18, the methods outlined in the “Spin-network mapping” section allow us to measure interactions between spins in the spectrally crowded region (see Supplementary Note 2), unlocking a part of the network that was previously not accessible.
Spin-chain sensing
We experimentally demonstrate the correlated sensing of spin chains up to five nuclear spins (Fig. 2), by sweeping a multi-dimensional parameter space (set by 5 spin frequencies and 4 spin-spin couplings). We start by polarizing the spin network1,40 and use the electron spin to sense a nuclear spin (Spin 1) at frequency A1, which marks the start of the chain.
a Schematic of an N = 5 nuclear-spin chain through different spectral regions {A1, A2, A3, A4, A5} (colored disks), starting from the NV electron spin (‘el’). Even though there might be multiple spins at each of the nuclear frequencies, only a single one is connected to this chain. b Pulse sequence (see the “Methods” section) for the prototypical N = 2 sequence (SEDOR)18. c Pulse sequence for sensing a chain of N = 5 nuclear spins, correlating 5 spin frequencies and 4-spin-spin interactions. In this case, the RF frequency (RF5) and free evolution time (t45) are varied to probe the connections of the spin at A4 to other spins. The resulting signal is mapped back via concatenated SEDOR sequences and finally read out (‘RO’) through the electron spin (see “Methods” section). d–g Experimental data, sweeping the frequency RFN of the recoupling pulse (left) to detect the frequencies of spins coupled to Spin 1, and varying the free evolution time tN−1,N (right) to extract their coupling strengths (for N = {2, 3, 4, 5}). For the frequency sweeps, evolution times tij are selected a-priori (annotated). Colored highlights denote the signals due to the spins in the chain and solid lines are fits to the data (see Supplementary Note 3). The signal in the bottom panel is inverted, due to the coupling C34 being negative.
First, we perform a double-resonance sensing sequence (Fig. 2b) consisting of a spin-echo sequence at frequency A1 and an additional π-pulse at frequency RF2. The free evolution time t12 is set to 50 ms, to optimize sensitivity to nuclear-nuclear couplings (typically ∼10 Hz). By sweeping RF2, strong connections (C1j ≫ 1/T2) are revealed through dips in the coherence signal of Spin 1 (Fig. 2d, left). We select a connection to a spin at RF2 = A2 (Spin 2) and determine (C12) by sweeping t12 (Fig. 2d, right).
Next, we extend the chain. To map the state of Spin 2 back to the electron sensor through Spin 1, we change the phase of the first \(\frac{\pi }{2}\)-pulse (labeled ‘yx’) and set t12 = 1/(2C12) to maximize signal transfer (see Supplementary Note 3). We then insert a double-resonance block for frequencies RF2 = A2 and RF3 in front of the sequence (Fig. 2c, e, left) to explore the couplings of Spin 2 to the network. This concatenating procedure can be continued to extend the chain, with up to 5 nuclear spins shown in Fig. 2. In general, the signal strength decreases with increasing chain length, as it is set by a combination of the degree of polarization and decoherence (T2 relative to Cij) of all spins in the chain (See Supplementary Note 3). This limits the chain lengths that can be effectively used.
By mapping back the signal through the spin chain, the five spin frequencies and the 4 coupling frequencies are directly correlated: they are found to originate from the same branch of the network. As spins are now characterized by their connection to the chains, rather than by their individual, generally degenerate, frequencies (Fig. 1b), they can be uniquely identified. Additionally, the chains enable measuring individual spin-spin couplings in spectrally crowded regions (Fig. 1c). As an example, the expected density of spins at frequency A4 is around 30 spins per kHz (Supplementary Fig. 6), making Spin 4 challenging to access directly from the electron spin. However, because Spin 3 probes only a small part of space, Spin 4 can be accessed through the chain, as demonstrated by the single-frequency oscillation in Fig. 2f. Another advantage over previous methods18 is that our sequences are sensitive to both the magnitude and the sign of the couplings, at the cost of requiring observable polarization of the spins in the chain. The sign of the couplings provides additional information for reconstructing the network (Fig. 2g).
High-resolution measurement of spin frequencies
While the sensing of spin-chains unlocks new parts of the network and reduces ambiguity by directly mapping the network connections, the spectral resolution for the spin frequencies (Ai) remains limited by the nuclear inhomogeneous dephasing time \({T}_{2}^{\star } \sim 5\,{{{{{{{\rm{ms}}}}}}}}\)16. Next, we demonstrate high-resolution (T2-limited) measurements of the characteristic spin-frequency shifts Δi. These frequencies provide a way to label spins, and thus further reduce ambiguity regarding which spins participate in the measured chains, particularly when a spectral region in the chain contains multiple spins (see Fig. 1d).
We isolate the interaction of nuclear spins with the electron spin through an electron-nuclear double-resonance block acting at a selected nuclear-spin-frequency region. The key idea is that the frequency shift imprinted by the electron spin sensor can be recoupled by controlling the electron spin state. We use microwave pulses that transfer the electron population from the \(\left\vert -1\right\rangle\) to the \(\left\vert+1\right\rangle\) state (Fig. 3b, see “Methods” section). The nuclear spin is decoupled from quasi-static noise and the rest of the spins, extending its coherence time, while the interaction of interest (Δi) is retained.
a The nuclear-spin frequencies Ai are shifted by the hyperfine interaction with the electron spin Δi (blue dotted line). Performing double resonance between the nuclear spin and the electron spin (mint green) retains this interaction while decoupling from quasi-static noise. b Pulse sequence for measuring Δ1 for a spin at ≈ A1. The nuclear spin undergoes a double-resonance sequence, picking up a phase (downward arrow) from the interaction with the electron spin, whose population is synchronously transferred from the \(\left\vert -1\right\rangle\) to the \(\left\vert+1\right\rangle\) state. Finally, the signal is read out (denoted 'RO') via the electron spin (see “Methods” section) c Time-domain signal of Δ1 = 14549.91(5) Hz (undersampled), with a coherence time of T2 = 0.36(2) s, fitted by a sinusoid with Gaussian decay. d Zoom-in of spectroscopy data as in Fig. 2d, showing a broad resonance (135 Hz FWHM), limited by the nuclear \({T}_{2}^{\star }\)-time. e Power spectral density (PSD) of (c), showing a linewidth that is ~75 times improved compared to (d).
Figure 3 shows an example for a nuclear spin at A1, for which we measure a hyperfine shift Δ1 = 14549.91(5) Hz and a spectral linewidth of 1.8 Hz (Fig. 3d and e). Besides a tool to distinguish individual spins in the network with high spectral resolution, this method has the potential for improved characterization of the hyperfine interaction in electron-nuclear-spin systems.
The observed coherence time T2 = 0.36(2) s is slightly shorter than the bare nuclear-spin-echo time T2,SE = 0.62(5) s. This reduction is caused by a perturbative component of the hyperfine tensor in combination with the finite magnetic field strength (see Supplementary Note 4). Flipping the electron spin between ms = ± 1 changes the quantization axes of the nuclear spins, which causes a change of the nuclear-nuclear interactions18, which is not decoupled by the spin-echo sequence (see Supplementary Fig. 4). The effect is strongest for spins near the NV center. For larger fields or for spins with weak hyperfine couplings, we expect that further resolution enhancement is possible by applying multiple refocusing pulses (see Supplementary Note 4).
Finally, we combine spin-chain sensing and electron-nuclear double resonance to correlate high-resolution spin frequencies (Δi) with specific spin-spin couplings (Cij), even when a chain contains multiple spins with overlapping frequencies. We illustrate this scheme on a chain of spins, where two spins (2 and 3) have a similar frequency (A2 ≈ A3) and both couple to A1 and A4 (Fig. 4a). The goal is to extract Δ2, Δ3 and the couplings to Spin 4 (C24, C34). As a reference, standard double-resonance shows a quickly decaying time-domain signal, indicating couplings to multiple spins that are spectrally unresolved (Fig. 4b).
a Schematic of the studied system, which contains two spins with overlapping frequencies A2≈A3 (gray circle), with slightly different hyperfine shifts (Δ2, Δ3). Both are coupled to the spin at A1, which is used for to transfer the signal to the electron spin for readout ('RO'). b SEDOR spectroscopy (as in Fig. 2d) of the frequency region A2, A3, with the estimated spin frequencies indicated. Sweeping the t12 evolution time results in a quick decay. c Pulse sequence for the electron-nuclear double-resonance sequence used in (e), where the Δi are extracted by sweeping t1. d Pulse sequence combining electron-nuclear and nuclear-nuclear double resonance, used in (f). Adding a nuclear-nuclear block (pink) and sweeping both t1 and t2 reveals the correlation between Δi and spin-spin couplings. e Sweeping t1 yields a high-resolution PSD of the A2, A3 frequency region, showing two (split) frequencies Δ2 and Δ3. The solid curve is a four-frequency fit to the data. f Signal (PSD) for the two-dimensional sequence, revealing two distinct regions along the f1-axis at Δ2 and Δ3. g Binned line cut of (f) along the f2-axis at frequencies Δ2, Δ3 (region indicated by dotted lines). The positions of the (split) peaks indicate the coupling to the spin at A4 (C24 = −11.8(2) Hz, C34 = −0.2(5) Hz). The solid line is a fit of two Gaussians to extract the couplings.
Figure 4 c shows how the electron-nuclear double-resonance sequence (mint green) is inserted in the spin-chain sequence to perform high-resolution spectroscopy of the A2, A3 frequency region. Sweeping the interaction time t1 shows multiple frequencies (Fig. 4e), hinting at the existence of multiple spins with approximate frequency A2. The result is consistent with two spins at frequencies Δ2 = 8019.5(2) Hz and Δ3 = 7695.2(1) Hz, split by an internal coupling of C23 = 7.6(1) Hz (Fig. 4a and Supplementary Fig. 2e, f).
Next, we add a nuclear-nuclear block (pink block in Fig. 4d) and sweep both electron-nuclear (t1) and nuclear-nuclear (t2) double-resonance times to correlate Δ2 and Δ3 with nuclear-nuclear couplings C24 and C34. After the t1 evolution, the hyperfine shifts Δi are imprinted in the z-expectation value of each spin, effectively modulating the nuclear-nuclear couplings observed in t2. The 2D power spectral density (PSD) shows signals in two distinct frequency regions along the f1-axis, corresponding to Δ2 and Δ3 (Fig. 4f). Analysing the nuclear-nuclear (f2) signal at these frequencies (Fig. 4g), we find C24 = −11.8(2) Hz and C34 = −0.2(5) Hz. We attribute the splitting to the coupling C23 between Spins 2 and 3 (see “Methods” section, Supplementary Fig. 2g, h). Varying RF4 enables the measurement of the interactions of spins 2 and 3 to other parts of the network (for example to determine C12, C13). Beyond the examples shown here, the electron-nuclear block can be inserted at specific positions in the spin-chain sequence (Fig. 2c) to extract Δi of all spins in the chain (Supplementary Fig. 9).
Reconstruction of a 50-spin network
Finally, we apply these methods to map a 50-spin network. The problem resembles a graph search (see “Methods” section)42. By identifying a number of spin chains in the system, and fusing them together based on overlapping sections, we reconstruct the connectivity (Fig. 5). Limited-sized chains are sufficient because the couplings are highly non-uniform, so that a few overlapping vertices and edges enable fusing chains with high confidence. We use a total of 249 measured interactions through pairwise and chained measurements. Fusing these together provides a hypothesis for the network connectivity (Fig. 5b).
a Schematic illustrating the procedure for mapping large networks. 1: Separate high-resolution chains through the network are measured (two example chains shown here). 2: We merge chains that share a common section of the network. 3: Optionally, an algorithm adapted from Abobeih et al.18 estimates the most likely spin positions (see “Methods” section), which predicts all unmeasured nuclear-nuclear couplings (dotted lines) and provides a validation for the assignment and merging of step 2. b Graph of the 50-spin network mapped in this work, with edges indicating spin-spin interactions above 2 Hz and vertex colors denoting spin frequencies Ai. The spins are labeled according to Supplementary Table 1. Black circles indicate the 23 newly mapped spins compared to previous work18. A 3D spatial image of the network is presented in Supplementary Fig. 3.
To validate our solution for the network we use the additional information that the nuclear-nuclear couplings can be modeled as dipolar and attempt to reconstruct the spatial distribution of the spins. Compared to work based on pairwise measurements18, our spin-chain measurements provide additional information on the connectivity and coupling signs, reducing the complexity of the numerical reconstruction. Additionally, we constrain the position using the measured hyperfine shift Δi (see “Methods” section). Because the problem is highly overdetermined18, the fact that a spatial solution is found that closely matches the measured frequencies and assignments validates the obtained network connectivity. Additionally, the reconstruction yields a spatial image of the spin network and predicts the remaining unmeasured 976 spin-spin interactions, most of which are weak (<1 Hz). An overview of the complete 50-spin cluster, characterized by 50-spin frequencies and 1225 spin-spin couplings can be found in Supplementary Table 1 and in Fig. 5b.
Discussion
In conclusion, we developed correlated double-resonance sensing that can map the structure of large networks of coupled spins, with high spectral resolution. We applied these methods to reconstruct a 50-spin network in the vicinity of an NV center in diamond. The methods can be applied to a variety of systems in different platforms, including electron-electron spin networks7,8,9,10,11,12,13,14,15,43. Mapping larger spin systems might be in reach using machine-learning-enhanced protocols and sparse or adaptive sampling techniques, which can further reduce acquisition times44,45. Combined with control fields1,16,32, the methods developed here provide a basis for universal quantum control and readout of the network, which has applications in quantum simulations of many-body physics1. Furthermore, the precise characterization of a 50-spin network provides new opportunities for optimizing quantum control gates in spin-qubit registers16,32,36, for testing theoretical predictions for defect spin systems46, and for studying coherence of solid-state spins on the microscopic level, including quantitative tests of open quantum systems and approximations of the central spin model47. Finally, these results might inspire high-resolution nano-MRI of quantum materials and biologically relevant samples outside the host crystal.
Methods
Sample and setup
All experiments are performed on a naturally occurring NV center at a temperature of 3.7 K (Montana S50 Cryostation), using a home-built confocal microscopy setup. The diamond sample was homoepitaxially grown using chemical vapor deposition and cleaved along the 〈111〉 crystal direction (Element Six). The sample has a natural abundance of 13C (1.1%). The NV center has been selected on the absence of couplings to 13C stronger than ≈ 500 kHz. No selection was made on other properties of the 13C nuclei distribution. A solid immersion lens (SIL) that enhances photon collection efficiency is fabricated around the NV center. A gold stripline is deposited close to the edge of the SIL for applying microwave (MW) and radio-frequency (RF) pulses. An external magnetic field of Bz = 403.553 G is applied along the symmetry axis of the NV center, using a (temperature-stabilized) permanent neodymium magnet mounted on a piezo stage outside the cryostat16. The field is aligned to within 0.1 degrees using a thermal echo sequence18.
Electron and nuclear spins
The sample was previously characterized in Abobeih et al.18 and the 27 nuclear spins imaged in that work are a subset of the 50 nuclear-spin network presented here. The NV electron spin has a dephasing time of \({T}_{2}^{\star }=4.9(2)\, {{{{{{{\rm{\mu}}}{{\rm{s}}}}}}}}\), a Hahn spin-echo time of T2 = 1.182(5) ms, and a relaxation time of T1 > 1 h18. The spin state is initialized via spin-pumping and read out in a single shot through spin-selective resonant excitation, with fidelities F0 = 89.3(2) (F1 = 98.2(1)) for the ms = 0 (ms = −1) state, resulting in an average fidelity of Favg = 0.938(2). The readout is corrected for these numbers to obtain a best estimate of the electronic spin state. The nuclear spins have typical dephasing times of \({T}_{2}^{\star }\) = 5–10 ms and Hahn-echo T2, up to 0.77(4) s16. T2-times for spins with frequencies closer to the nuclear Larmor frequency (Δi ≲ 5 kHz) typically decrease to below 100 ms (see e.g. Fig. 2g, right panel), as the spin-echo simultaneously drives other nuclear spins at these frequencies which are recoupled to the target (instantaneous diffusion).
Pulse sequences
We drive the electronic ms = 0 ↔ ms = −1 (ms = 0 ↔ ms = +1) spin transitions at 1.746666 (4.008650) GHz with Hermite-shaped pulses. For transferring the electron population from the ms = −1 to the ms = +1 state (Figs. 3 and 4), we apply two consecutive π-pulses at the two MW transitions, spaced by a waiting time of 3 μs. For all experiments, we apply RF pulses with an error-function envelope in the frequency range 400–500 kHz. Details on the electronics to generate these pulses can be found in ref. 1.
For most experiments described in this work, the measurable signal is dependent on the degree of nuclear-spin polarization. We use a dynamical-nuclear polarization sequence, PulsePol, to transfer polarization from the electron spin to the nuclear-spin bath1,40. The number of repetitions of the sequence is dependent on the specific polarization dynamics of the spins being used in the given experiment but ranges from 500–10,000. The PulsePol sequence is indicated by the ‘Init’ block in the sequence schematics. All double-resonance sequences follow the convention illustrated in the dotted boxes in Fig. 2b, c, and Fig. 3b, where the horizontal gray lines denote different RF frequencies and the top line the electronic MW frequency. The two letters in the double-resonance blocks (‘xx’ or ‘yx’) denote the rotation axes of the first and final π/2-pulses. The π-pulses (along the x-axis) are applied sequentially (following ref. 18). The lengths of all RF pulses are taken into account for calculating the total evolution time. Nuclear spins are read out via the electron by phase-sensitive (‘yx’) dynamical decoupling; DD or DDRF sequences16, indicated by the ‘RO’-marked block in the sequence schematics. Typically, the spin that is read out with the electron is reinitialized via a SWAP gate before the final SEDOR block in order to maximize its polarization. However, all experiments presented here can be performed by using just the DNP initialization, albeit with a slightly lower signal-to-noise ratio.
2D spectroscopy experiments
For the 2D measurement, we concatenate an electron-nuclear double resonance with a nuclear-nuclear SEDOR. For every t1-point, we acquire 20 t2 points, ranging from 10 to 260 ms. The final π/2-pulse of the electron double resonance and the first of the SEDOR are not executed, as they can be compiled away. To correct for any slow magnetic field drifts that lead to miscalibration of the two-qubit gate used for readout, causing a small offset in the measured signal, we set our signal baseline to the mean of the final five points (≈200–260 ms), where we expect the signal to be mostly decayed. Note that these field drifts do not affect any of the double-resonance blocks in which the quantities to be measured are encoded (due to the spin-echo).
Both the 1D (Fig. 4e) and 2D (Fig. 4f) signals are undersampled to reduce the required bandwidth. To extract Δ2, Δ3, we fit a sum of cosines to the time-domain signal of Fig. 4e. To extract the frequencies along the f2-axis, which encode the nuclear-nuclear couplings (C24, C34), we take an (extended) line cut at f1 = Δ2 and f1 = Δ3. To increase the signal, we sum over the four bins indicated by the dotted lines. We fit two independent Gaussians to the f2-data to extract C24 and C34. We find splittings of 7.8(2) Hz and 10.2(5) Hz, respectively, whose deviation with respect to measurements in Fig. 4e is unexplained. The skewed configuration of the two peaks (lower left, upper right) is a result of the correlation of the neighboring spin state between the t1 and t2 evolution times. The different ratio of signal amplitudes belonging to Spin 2 and Spin 3, between the 1D and 2D electron-nuclear measurements are due to using different settings for the chained readout (evolution time, RF power). As we are only interested in extracting frequencies, we can tolerate such deviations.
Supplementary Fig. 2 shows numerical simulations of the experiments presented in Fig. 4. These are generated by evaluating the Hamiltonian in Supplementary Eq. 3, taking into account the two spins at A2, A3, the spin at A4, and the electron spin.
Network reconstruction
Here, we outline a general procedure for mapping the network by performing specific spin-chain and high-resolution Δi measurements. The mapping-problem resembles a graph search, with the NV electron spin used as root42. We base the protocol on a breadth-first-like search, which yields a spanning tree as output, completely characterizing the network. The following pseudocode describes the protocol:
Algorithm 1
Input: physical spin network, initial vertex el
Output: breadth-first tree T from root el
V0 = {el} ⊳ Make el the root of T, Vi denotes the set of vertices at distance i
i = 0
while\({V}_{i} \, \ne \, {{\emptyset}}\) do ⊳ Continue until network is exhausted
for each vertex v ∈ Vi do
for each frequency f do
C, singlecoupling = MeasureCoupling(v, f) ⊳ Returns coupling C between vertex v and frequency f
if singlecoupling then ⊳ Checks if MeasureCoupling returned a single, resolvable coupling
create vertex w
Aw = f
Cvw = C
unique, duplicate = CheckVertex(w, T) ⊳ Checks if w was already mapped in T
if unique then ⊳ w was not yet mapped
add w to Vi+1 in T ⊳ w is added to T as a new vertex
end if
if not unique and duplicate == k then ⊳ w is the same vertex as k in T
add Cvk = Cvw in T ⊳ The measured coupling is assigned to k
delete w
end if
if not unique and duplicate == None then ⊳ Undecided if spin was mapped
delete w ⊳ w is not added to T
end if
end if
end for
end for
i = i + 1
end while
New vertices that are detected by chained measurements are iteratively added, once we verify that a vertex was not characterized before (i.e. has a duplicate in the spanning tree T). The function MeasureCoupling(v, f) performs a spin-echo double-resonance sequence between vertex v and a frequency f, (a spin chain of length i − 1 is used to access v) and checks whether a single, resolvable coupling is present (stored in the boolean variable ‘singlecoupling’). In the case that v is the electron spin (el) an electron-nuclear DD(RF) sequence is performed16,41. The function CheckVertex(w, T) instructs the experimenter to perform a number of spin chain and electron-nuclear double-resonance measurements, comparing the vertex w and its position in the network with that of the (possibly duplicate) vertex k (see Supplementary Note 5). If one of these measurements is not consistent with our knowledge of k, we conclude w is a unique vertex and add it to T. If all measurements coincide with our knowledge of k, we conclude it is the same vertex and merge w and k. If the CheckVertex(w, T) is inconclusive (e.g. due to limited measurement resolution), we do not add w to T. Note that the measurement resolution, determined by the nuclear T2-time, is expected to decrease for spins further away from the NV center (See Supplementary Note 2). This eventually limits the number of unique spins that can be identified and added to the network map.
The platform-independent procedure outlined above can be complemented by logic based on the 3D spatial structure of the system18. For example, when the CheckVertex(w, T) function is inconclusive, one can sometimes still conclude that w must be unique (or vice versa equal to k), based on the restricted number of possible physical positions of these two spins in 3D space18. In practice, we alternate the graph search procedure with calls to a positioning algorithm18, which continuously checks whether the spanning tree T is physical and aides in the identification of possible duplicates.
3D spatial image
For the 3D reconstruction of the network, we use the positioning algorithm developed in ref. 18. To limit the experimental time we re-use the data of ref. 18 and add the new measurements to it in an iterative way. We set the tolerance for the difference between measured and calculated couplings to 1 Hz. Although we only measure the new spin-spin couplings and chains when the electron is in the ms = −1 state, we can assume this is within tolerance to the average value of the coupling if the perpendicular hyperfine component is small (<10 kHz)18. The spin positions are restricted by the diamond lattice. Spins that belong to the same chain are always added in the same iteration and up to 10000 possible configurations are kept. Chains starting from different parts of the known cluster can be positioned in a parallel fashion if they share no spins, reducing computational time. For spins that are relatively far away from the NV, we also make use of the interaction with the electron spin, approximating the hyperfine shift Δi to be of dipolar form within a tolerance of 1 kHz (neglecting the Fermi contact term46). For those cases, we model the electron spin as a point dipole with origin at the center of mass, as computed by density functional theory46. If multiple solutions are found, we report the standard deviation of the possible solutions as a measure of the spatial uncertainty (see Supplementary Table 1).
Error model and fitting
Confidence intervals assume the measurement of the electron state is limited by photon shot noise. The shot-noise-limited model is propagated in an absolute sense, meaning the uncertainty on fit parameters is not rescaled to match the sample variance of the residuals after the fit. For all quoted numbers, the number between brackets indicates one standard deviation or error indicated by the fitting procedure. We calculate the error on the PSD according to ref. 48, assuming normally distributed errors.
Data availability
All data underlying the study are available on the open 4TU data server under accession code: https://doi.org/10.4121/aba1cc84-0aea-4cdc-93ca-68b0db38bd81.v1.
Code availability
Code used to operate the experiments is available on request.
References
Randall, J. et al. Many-body–localized discrete time crystal with a programmable spin-based quantum simulator. Science 374, 1474–1478 (2021).
Pompili, M. et al. Realization of a multi-node quantum network of remote solid-state qubits. Science 372, 259–264 (2021).
Hermans, S. L. N. et al. Qubit teleportation between non-neighbouring nodes in a quantum network. Nature 605, 663–668 (2022).
Degen, C. L., Reinhard, F. & Cappellaro, P. Quantum sensing. Rev. Mod. Phys. 89, 035002 (2017).
Casola, F., van der Sar, T. & Yacoby, A. Probing condensed matter physics with magnetometry based on nitrogen-vacancy centres in diamond. Nat. Rev. Mater. 3, 17088 (2018).
Janitz, E. et al. Diamond surface engineering for molecular sensing with nitrogen-vacancy centers. J. Mater Chem. C 10, 13533–13569 (2022).
Awschalom, D. D., Hanson, R., Wrachtrup, J. & Zhou, B. B. Quantum technologies with optically interfaced solid-state spins. Nat. Photon. 12, 516–527 (2018).
Debroux, R. et al. Quantum control of the tin-vacancy spin qubit in diamond. Phys. Rev. X 11, 041041 (2021).
Sipahigil, A. et al. An integrated diamond nanophotonics platform for quantum-optical networks. Science 354, 847–850 (2016).
Bourassa, A. et al. Entanglement and control of single nuclear spins in isotopically engineered silicon carbide. Nat. Mater. 19, 1319–1325 (2020).
Lukin, D. M., Guidry, M. A. & Vučković, J. Integrated quantum photonics with silicon carbide: challenges and prospects. PRX Quantum 1, 020102 (2020).
Durand, A. et al. Broad diversity of near-infrared single-photon emitters in silicon. Phys. Rev. Lett. 126, 083602 (2021).
Higginbottom, D. B. et al. Optical observation of single spins in silicon. Nature 607, 266–270 (2022).
Gao, X. et al. Nuclear spin polarization and control in hexagonal boron nitride. Nat. Mater. 21, 1024–1028 (2022).
Ruskuc, A., Wu, C.-J., Rochman, J., Choi, J. & Faraon, A. Nuclear spin-wave quantum register for a solid-state qubit. Nature 602, 408–413 (2022).
Bradley, C. E. et al. A ten-qubit solid-state spin register with quantum memory up to one minute. Phys. Rev. X 9, 031045 (2019).
Babin, C. et al. Fabrication and nanophotonic waveguide integration of silicon carbide colour centres with preserved spin-optical coherence. Nat. Mater. 21, 67–73 (2022).
Abobeih, M. H. et al. Atomic-scale imaging of a 27-nuclear-spin cluster using a quantum sensor. Nature 576, 411–415 (2019).
Cujia, K. S., Herb, K., Zopes, J., Abendroth, J. M. & Degen, C. L. Parallel detection and spatial mapping of large nuclear spin clusters. Nat. Commun. 13, 1260 (2022).
Zhao, N., Hu, J.-L., Ho, S.-W., Wan, J. T. K. & Liu, R. B. Atomic-scale magnetometry of distant nuclear spin clusters via nitrogen-vacancy spin in diamond. Nat. Nanotechnol. 6, 242–246 (2011).
Schwartz, I. et al. Blueprint for nanoscale nmr. Sci. Rep. 9, 6938 (2019).
Perunicic, V. S., Hill, C. D., Hall, L. T. & Hollenberg, L. A quantum spin-probe molecular microscope. Nat. Commun. 7, 12667 (2016).
Wang, Z.-Y., Haase, J. F., Casanova, J. & Plenio, M. B. Positioning nuclear spins in interacting clusters for quantum technologies and bioimaging. Phys. Rev. B 93, 174104 (2016).
Unden, T. et al. Coherent control of solid state nuclear spin nano-ensembles. npj Quantum Inf. 4, 39 (2018).
Cai, J., Retzker, A., Jelezko, F. & Plenio, M. B. A large-scale quantum simulator on a diamond surface at room temperature. Nat. Phys. 9, 168–173 (2013).
Geng, J., Vorobyov, V., Dasari, D. & Wrachtrup, J. Ancilla assisted discrete time crystals in non-interacting spin systems. Preprint at https://doi.org/10.48550/arXiv.2107.11748 (2021).
Davis, E. J. et al. Probing many-body dynamics in a two-dimensional dipolar spin ensemble. Nat. Phys. 19, 836–844 (2023).
Bartling, H. P. et al. Entanglement of spin-pair qubits with intrinsic dephasing times exceeding a minute. Phys. Rev. X 12, 011048 (2022).
Kalb, N. et al. Entanglement distillation between solid-state quantum network nodes. Science 356, 928–932 (2017).
Waldherr, G. et al. Quantum error correction in a solid-state hybrid spin register. Nature 506, 204–207 (2014).
Taminiau, T. H., Cramer, J., van der Sar, T., Dobrovitski, V. V. & Hanson, R. Universal control and error correction in multi-qubit spin registers in diamond. Nat. Nanotechnol. 9, 171–176 (2014).
Abobeih, M. H. et al. Fault-tolerant operation of a logical qubit in a diamond quantum processor. Nature 606, 884–889 (2022).
Shi, F. et al. Single-protein spin resonance spectroscopy under ambient conditions. Science 347, 1135–1138 (2015).
Zopes, J. & Degen, C. Reconstruction-free quantum sensing of arbitrary waveforms. Phys. Rev. Appl. 12, 054028 (2019).
Zopes, J., Herb, K., Cujia, K. S. & Degen, C. L. Three-dimensional nuclear spin positioning using coherent radio-frequency control. Phys. Rev. Lett. 121, 170801 (2018).
Xie, T. et al. 99.92%-fidelity cnot gates in solids by noise filtering. Phys. Rev. Lett. 130, 030601 (2023).
Wise, D. F., Morton, J. J. & Dhomkar, S. Using deep learning to understand and mitigate the qubit noise environment. PRX Quantum 2, 010316 (2021).
Lovchinsky, I. et al. Nuclear magnetic resonance detection and spectroscopy of single proteins using quantum logic. Science 351, 836–841 (2016).
Ajoy, A., Bissbort, U., Lukin, M. D., Walsworth, R. L. & Cappellaro, P. Atomic-scale nuclear spin imaging using quantum-assisted sensors in diamond. Phys. Rev. X 5, 011001 (2015).
Schwartz, I. et al. Robust optical polarization of nuclear spin baths using Hamiltonian engineering of nitrogen-vacancy center quantum dynamics. Sci. Adv. 4, eaat8978 (2018).
Taminiau, T. H. et al. Detection and control of individual nuclear spins using a weakly coupled electron spin. Phys. Rev. Lett. 109, 137602 (2012).
Gross, J. L. & Yellen, J. (eds) Handbook of Graph Theory. Discrete Mathematics and Its Applications. (CRC Press, Boca Raton, 2004).
Ungar, A., Cappellaro, P., Cooper, A. & Sun, W. K. C. Control of an Environmental Spin Defect beyond the Coherence Limit of a Central Spin. PRX Quantum. 5, 010321 (2024).
Martina, S., Hernández-Gómez, S., Gherardini, S., Caruso, F. & Fabbri, N. Deep learning enhanced noise spectroscopy of a spin qubit environment. Mach. Learn.: Sci. Technol. 4, 02LT01 (2023).
Jung, K. et al. Deep learning enhanced individual nuclear-spin detection. npj Quantum Inf. 7, 41 (2021).
Nizovtsev, A. P. et al. Non-flipping 13 C spins near an NV center in diamond: hyperfine and spatial characteristics by density functional theory simulation of the C 510 [NV]H 252 cluster. N. J. Phys. 20, 023022 (2018).
Yang, W., Ma, W.-L. & Liu, R.-B. Quantum many-body theory for electron spin decoherence in nanoscale nuclear spin baths. Rep. Prog. Phys. 80, 016001 (2016).
Hoyng, P. An error analysis of power spectra. Astron. AstroPhys. 47, 449–452 (1976).
Acknowledgements
We thank V. V. Dobrovitski for useful discussions, and H.P. Bartling and S.J.H. Loenen for experimental assistance. This work is part of the research program NWA-ORC (NWA.1160.18.208 and NWA.1292.19.194), (partly) financed by the Dutch Research Council (NWO). This work was supported by the Dutch National Growth Fund (NGF), as part of the Quantum Delta NL program. This work was supported by the Netherlands Organisation for Scientific Research (NWO/OCW) through a Vidi grant. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 852410). This work was supported by the Netherlands Organization for Scientific Research (NWO/OCW), as part of the Quantum Software Consortium Program under Project 024.003.037/3368. S.A.B. and L.C.B. acknowledge support from the National Science Foundation under grant ECCS-1842655, and from the Institute of International Education Graduate International Research Experiences (IIE-GIRE) Scholarship. S.A.B. acknowledges support from an IBM PhD Fellowship.
Author information
Authors and Affiliations
Contributions
GLvdS, DK, and THT devised the experiments. GLvdS performed the experiments and collected the data. CEB, JR, SAB, LCB, MHA, and THT performed and analyzed preliminary experiments. GLvdS, DK, CEB, and JR prepared the experimental apparatus. GLvdS, DK, and THT analyzed the data. MM and DJT grew the diamond sample. GLvdS and THT wrote the manuscript with input from all authors. THT supervised the project.
Corresponding author
Ethics declarations
Competing interests
T.H. Taminiau, G.L. van de Stolpe, C.E. Bradley, J. Randall, and D.P. Kwiatkowski declare competing interests in the form of a Dutch patent application. Patent applicant: Technische Universiteit Delft. Name of inventor(s): Taminiau, Tim Hugo; van de Stolpe, Guido Luuk; Bradley, Conor Eliot; Randall, Joe; Kwiatkowski, Damian Patryk. Application number: NL2035279. Status of application: filed, waiting for search report. Covered aspects: Full content of manuscript. M.H. Abobeih, S.A. Breitweiser, L.C. Basset, M. Markham, and D.J. Twitchen declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Ren-Bao Liu, and the other, anonymous, reviewers for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
van de Stolpe, G.L., Kwiatkowski, D.P., Bradley, C.E. et al. Mapping a 50-spin-qubit network through correlated sensing. Nat Commun 15, 2006 (2024). https://doi.org/10.1038/s41467-024-46075-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-46075-4
- Springer Nature Limited
This article is cited by
-
Accurate hyperfine tensors for solid state quantum applications: case of the NV center in diamond
Communications Physics (2024)