Abstract
Here we retrieve global daily 1 km gapless PM2.5 concentrations via machine learning and big data, revealing its spatiotemporal variability at an exceptionally detailed level everywhere every day from 2017 to 2022, valuable for air quality monitoring, climate change, and public health studies. We find that 96%, 82%, and 53% of Earth’s populated areas are exposed to unhealthy air for at least one day, one week, and one month in 2022, respectively. Strong disparities in exposure risks and duration are exhibited between developed and developing countries, urban and rural areas, and different parts of cities. Wave-like dramatic changes in air quality are clearly seen around the world before, during, and after the COVID-19 lockdowns, as is the mortality burden linked to fluctuating air pollution events. Encouragingly, only approximately one-third of all countries return to pre-pandemic pollution levels. Many nature-induced air pollution episodes are also revealed, such as biomass burning.
Similar content being viewed by others
Introduction
Ambient air pollution poses a major global environmental concern, ranked as the fourth highest risk factor for human health, causing ~6.7 million global deaths in 2019 according to the Global Burden of Disease study1. Exposure to PM2.5 (particulate matter with aerodynamic diameters ≤ 2.5 µm) pollution is associated with a variety of circulatory and respiratory diseases2,3,4,5, contributing to 4 million deaths globally in 2020. PM2.5 emitted from different sources may have different health risks, especially ultrafine particles from urban traffic or combustion, including black-carbon-containing particles from wildfire smoke6,7,8,9. Besides long-term effects, short-term exposure to high levels of pollution is also a focal point in environmental health studies10,11,12,13,14. With the accumulating evidence of the health effects of PM2.5, the World Health Organization (WHO) updated its short-term and long-term air quality guidelines in 2021, aimed at a continual reduction in air pollution15. Despite a steady increase in PM2.5 monitoring capabilities over the last decade, many people still live far from monitors. The lack of daily global high-resolution PM2.5 data has been hindering our ability to assess air pollution exposure and health effects in all parts of the world.
Regional PM2.5 estimates have been extensively studied from the satellite perspective using retrieved aerosol optical depth (AOD) products16,17,18,19, but only a handful of studies have been conducted on the global PM2.5 scale. Lary et al.20 trained an ensemble machine-learning model to estimate daily PM2.5 from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) and Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue AOD products at a 10 km resolution. van Donkelaar et al.21 derived global daily PM2.5 from MODIS and Multiangle Imaging Spectroradiometer (MISR) AOD products via a vertical conversion factor determined from the 3-D Goddard Earth Observing System (GEOS)-Chem chemical transport model (CTM) at a 10 km resolution. Yu et al.22 developed a stacked machine-learning model to estimate global daily 10 km PM2.5 from 2000 to 2019, integrating GEOS-Chem PM2.5 simulations with meteorological and geographical data but omitting AOD. Recently, the spatial resolution of PM2.5 has improved to 1 km through the inclusion of the MODIS Multi-Angle Implementation of Atmospheric Correction (MAIAC) AOD product23, combining the Geographically Weighted Regression (GWR) and CTM models. However, global 1 km PM2.5 estimates are only available on annual24,25 or monthly26 scales.
Global, daily, high-resolution, and high-quality PM2.5 data are particularly in demand for a wide range of studies, from air quality to climate change and public health, but monitoring it from space is extremely challenging. PM2.5 can vary dynamically in space and time, especially over land, exhibiting strong spatiotemporal heterogeneities27 caused by many complex and diverse factors. They are sensitive not only to pollution emission profiles, the density of the human population, and meteorological conditions, but also to regionally variant geographic location and terrain conditions28. Observing the heterogeneities requires dense in situ monitoring networks, which only exist in a handful of countries for limited periods. They are very unevenly distributed, dense in developed and populated regions but sparse or missing in under-developed and rural regions, posing great challenges in spatial extrapolation17. Space-borne remote sensing offers global and uniform coverage, but it is only feasible under clear-sky conditions. The ubiquitous presence of clouds (60–70% globally) would lead to very large data gaps17,29, seriously hindering our ability to observe air pollution routinely, exacerbated by inherent difficulties in separating clouds from severe haze and heavy smoke, both of particular concern to the public.
These challenges can be tackled by applying machine learning (ML) models to a variety of datasets. A state-of-the-art ML model allows for the extraction and integration of virtually all information pertaining to PM2.5 from ground measurements, satellite remote sensing products, CTM simulations of aerosols and PM2.5, as well as population density, topography, atmospheric reanalysis of meteorological fields, pollutant emission inventory, and economic level of regional development. In particular, our ML-extended model takes advantage of model simulations and accounts for the spatiotemporal autocorrelations and differences in air pollutants. It first solves the missing data in satellite aerosol products over cloudy and snow/ice surfaces, then retrieves PM2.5 from gap-filled AOD. This leads to spatially complete and more accurate daily PM2.5 information for exposure risk and health burden assessments.
Following painstaking efforts in choosing/refining ML models and compiling big datasets from a wide range of sources, we generated a long-term (1 January 2017 to 31 December 2022) global (over land), daily, 1 km resolution, gapless PM2.5 dataset for the first time, and used it to address some important questions, such as (1) What are the local, regional, and global PM2.5 concentrations on a given day?; (2) What is the daily risk exposure to PM2.5 pollution and its associated impact on public health?; (3) How big is the impact of wildfires and COVID-19 episodes on local to global scales?; among others.
Results and discussion
Model validation and uncertainty
Our model can accurately estimate daily PM2.5 concentrations at most ground-based monitoring stations, as confirmed by high sample-based cross-validated coefficients of determination (CV-R2 > 0.6), low root-mean-square error (RMSE < 10 μg m−3), and normalized RMSE scaling by mean (NRMSE < 0.6) values at more than 80% of the stations (Fig. 1a, b). On average, our model achieves a highly reliable overall accuracy, with an average sample-based CV-R2 of 0.91 and RMSE (NRMSE) of 9.2 μg m−3 (0.37) for daily retrievals, with accuracies improving on monthly (e.g., CV-R2 = 0.97 and RMSE = 4.15 μg m−3) and annual (e.g., CV-R2 = 0.98 and RMSE = 2.77 μg m−3) scales (Fig. 1c–e). Additionally, independent spatiotemporal cross-validation results highlight the model’s capability in accurately predicting daily PM2.5 levels at locations (i.e., station-, grid-, and state-based CV-R2 = 0.87, 0.79, and 0.76, and RMSE = 10.94, 14.17, and 16.03 μg m−3, respectively) as well as on dates lacking ground measurements (i.e., day-, week-, and month-based CV-R2 = 0.81, 0.73, and 0.71, and RMSE = 13.49, 15.01, and 16.46 μg m−3, respectively) (Supplementary Fig. S1). Moreover, our model exhibits a comparable “within” R2 of 0.82 to the (station-based) space CV-R2 (0.87), indicating its ability to accurately predict local and daily variations in PM2.5 pollution, going beyond capturing only the differences in average values across locations or between seasons. Also, the model’s strong performance in continent-stratified CV (cluster CV-R2 = 0.54–0.89) further underscores its robustness in handling large areas with limited training stations (Supplementary Table S1).
Day-to-day gapless PM2.5 variations
To portray global variations, Fig. 2 presents our 1 km gapless PM2.5 retrievals on an individual day (8 October 2020). In general, the spatial patterns of satellite-derived PM2.5 retrieval were highly consistent with ground measurements both globally (sample-based CV-R2 = 0.92) and regionally (Fig. 2a–h). Air quality was very good (PM2.5 < 8 μg m−3) in Canada, the eastern United States (US), Europe, and Australia (Fig. 2c, d, f). By contrast, severe PM2.5 pollution occurred in the Beijing-Tianjin-Hebei region in eastern China, the Indo-Gangetic Plain in northern India (Fig. 2g, h), and Zambia in southern Africa, especially around their respective metropolises (i.e., Beijing, New Delhi, and Lusaka), strongly linked with their high population densities and intensive human activities leading to large anthropogenic emissions. Extremely high PM2.5 levels (> 80 μg m−3) were also caused by smoke from both natural and human-induced fires such as those in the western US (especially in California) and in central South America (Fig. 2a, b). Additionally, high PM2.5 concentrations were detected in the Sahara in northern Africa (Fig. 2e) and the Taklamakan Desert in northwestern China, both associated with dust storms. Conventional satellite-based remote sensing approaches are only applicable to clear-sky pixels, resulting in very spotty distributions of PM2.5, as illustrated in Supplementary Fig. S2 in contrast to the smooth image of Fig. 2, significantly impeding the ability to discern spatial patterns of PM2.5 pollution, especially on small scales, and markedly increasing the probability of missing crucial high-pollution events.
Our gap-filling method27 allows us to capture PM2.5 pollution much more thoroughly to observe strong region-to-region and day-to-day variations throughout the year around the world. While the retrieved PM2.5 may be misleading in pointing out the sources of pollution because pollution is inherently both situ and transboundary, they still portray the severity and variations of air pollution problems at various scales, ranging from local and regional to national and continental levels. We can, e.g., clearly see the disparity between developed and developing worlds (categorized by the World Population Review) (Fig. 3a–c) with much lower and higher PM2.5 loads, respectively, approximately half (48%). The influences of natural variables may also be inferred: for instance, a shallow planetary boundary layer likely plays a major role in ubiquitous pollution maxima during northern winters30. Daily data are invaluable in accurately pinpointing the dates and locations of extreme high-pollution events from natural disasters, such as the wildfires/bushfires that have devastated the United States (US), Brazil, and Australia during the fire seasons, as well as spring dust storms in Nigeria (outlined by red dashed ellipses in Fig. 3d–g). Notably, they provide a clear picture of the spatial dynamics of smoke emissions at various stages of wildfire, encompassing the initial ignition, spreading, intensification, and final suppression, as demonstrated by two examples from the western US (Supplementary Fig. S3) and eastern Australia (Supplementary Fig. S4). Additionally, these data excel in identifying the timing of high-pollution events caused by anthropogenic emissions, as observed in China and India (Fig. 3h, i). They are particularly useful for the continuous monitoring of regional severe haze episodes over time and space, offering insights from the formation to the end, as evident in two examples from eastern China (Supplementary Fig. S5) and northern Asia (Supplementary Fig. S6).
Last, we employed Explainable Machine Learning (XAI) to interpret the driving factors behind daily PM2.5 variations by calculating the permutation importance for each feature (Supplementary Note 1 and Fig. S7). Our findings revealed that satellite AOD and modeled PM2.5 as the primary global contributors, accounting for 51%, followed by meteorological variables (especially relative humidity and planetary boundary-layer height) ranging from 20% to 73%, and aerosol hygroscopicity. The roles of contributing factors vary from region to region due to different causes, which may help provide more effective policies to combat air pollution.
Daily health-risk exposure to PM2.5 pollution
In 2022, global daily population-weighted PM2.5 generally satisfied the WHO-recommended short-term interim targets 1 and 2 (i.e., S-IT1 and S-IT2: daily PM2.5 = 75 and 50 μg m−3, respectively) and came close to achieving the interim target 3 (i.e., S-IT3: daily PM2.5 = 37.5 μg m−3), with only a few exceptions (3%) on certain days. However, a concerning 57% of the days did not meet the interim target 4 (i.e., S-IT4: daily PM2.5 = 20 μg m−3), and even worse, all days (100%) exceeded the air quality guidance (i.e., S-AQG: daily PM2.5 = 15 μg m−3) level (Fig. 3a). Daily PM2.5 of developed countries achieved all short-term interim targets, but 15% of the days still exceeded the S-AQG level (Fig. 3b). By contrast, in developing countries, all days met the S-IT1 and S-IT2 targets, but 12% and 66% of the days failed to meet the S-IT3 and S-IT4 targets, respectively, and not a single day met the S-AQG level (Fig. 3c). Overall, only a small percentage of countries (13%) exceeded the S-IT1 target at least once. However, as more stringent air quality standards were imposed, the proportions steadily increased, with 28%, 38%, and 66% of countries failing to meet the S-IT2, S-IT3, and S-IT4 targets, respectively (Fig. 4a–d).
The top 20 countries worldwide recording the highest daily PM2.5 exposure risk primarily came from North Africa and the Middle East (65%), and South and East Asia (25%), among which Kuwait, Pakistan, India, and China topped the list, with all days (100%) surpassing the S-AQG level (Fig. 4e and Supplementary Table 2). A staggering 87%, 80%, and 67% of countries experienced unhealthy air for at least 1, 7, and 30 days, respectively. This phenomenon worsened significantly at the city level, with nearly all (~99.7%) of 1860 major cities (defined as urban agglomerations with populations greater than 300 thousand, according to the United Nations World Urbanization Prospects) being exposed to PM2.5 risk (within 10 × 10 km2 around city centers) for at least one day, with exposure periods for 7 days and 30 days reaching 97% and 91%, respectively (Fig. 4e). Despite the proportions consistently decreasing with more stringent targets, a considerable number of cities still faced severe air pollution, with daily PM2.5 levels exceeding the S-IT1 target for 44% (26% and 12%) of cities for 1 day (7 and 30 days) (Fig. 4a). Among the top 20 cities, 16, including the capitals of four countries, experienced the most frequent exposure risk, with all days (100%) above the S-AQG level, and 10 of them were from Pakistan (Supplementary Table 3).
Figure 5 provides a comprehensive global assessment of the population PM2.5 daily exposure risk for 2022 at a fine 1 km2 grid in terms of WHO’s recommended short-term four interim targets and air quality guideline level. Except for densely populated areas like the Indo-Gangetic and North China Plains, most regions showed a relatively small number of days with severe pollution above the two S-IT1 and S-IT2 targets of less than 20% (Fig. 5a, b). The proportions were much smaller in many developed countries like those in North America and Europe. However, with the continuous promotion of interim targets 3 and 4, both the areas covered and their respective exposure risk to moderate PM2.5 pollution increased (Fig. 5c, d). Regarding the S-AQG level (Fig. 5e), nearly all global inhabited areas were exposed to short-term PM2.5 risks, including some developed countries like Italy (A), Poland, and Slovakia, and mega-cities like Los Angeles in the USA (B), with more than 40% of days above the S-AQG level. High daily exposure risks (> 70%) were concentrated in developing countries, particularly those in South Asia. Similar conditions were also observed in many big cities or localities, including Mexico City in Mexico (C), Región Metropolitana de Santiago in Chile (D), Sao Paulo in Brazil (E), Gauteng in South Africa (F), Tehran in Iran (G), Krung Thep in Thailand (H), Ho Chi Minh in Viet Nam (I), and Pyongyang in North Korea (J).
In general, ~23%, 41%, 56%, 80%, and 96% of Earth’s populated areas exceeded the WHO S-IT1 through S-IT4 targets and the S-AQG level (Fig. 5i–v), respectively, at least once in 2022. The respective proportions are 13%, 24%, 33%, 52%, and 82% for 7 days, and 5%, 15%, 22%, 32%, and 53% for 30 days in a year. Notably, significant differences existed between developed and developing countries. While the exposure areas for at least 1 day above S-AQG are comparable (96% vs. 96%), the difference rapidly widened with higher exposure risks, e.g., S-IT4 (73% vs. 88%), S-IT3 (39% vs. 75%), S-IT2 (19% vs. 64%), and S-IT1 (6% vs. 41%). More importantly, this gap (e.g., S-AQG) grew significantly by expanding the exposure period to 7 days (74% vs. 90%) and 30 days (29% vs. 78%), emphasizing the greater short-term exposure risk in middle- and low-income counties (Fig. 5vi). Arguably, when the exposure days are related to wildfire or agricultural biomass burning and come in succession rather than randomly during the year, they potentially may lead to more adverse health effects9,31,32. These findings also illustrate the global extent of air quality challenges and the need for comprehensive efforts to tackle air pollution and work towards meeting international air quality standards.
Short-term PM2.5 change and mortality burden
El Niño year 2020 stands alone, resulting in large regional contrasting differences: stronger than usual wildfire activity and biomass burning led to a large number of smoke-related PM2.5 emissions, resulting in elevated levels of positive PM2.5 anomalies in global hot and dry regions during the fire seasons, including the western part of North America33,34,35, most areas of South America36,37,38, and eastern Australia (Supplementary Fig. S8). Specifically, during the month with the most wildfire records in 2020, population-weighted PM2.5 levels were 224%, 80%, and 143% higher in the western US in September, central South America in October, and southeastern Australia in January (outlined in blue in the figure), respectively, compared to historical (2018–2019) levels. Subsequently, we computed the difference in cumulative premature deaths attributed to short-term PM2.5 exposure between fire and normal years. Enhanced wildfire smoke-related PM2.5 emissions in the western US (September), Brazil (October), and southeastern Australia (January) led to additional deaths of 832 (95% confidence level, or CI: 567, 1122), 449 (95% CI: 305, 592), and 93 (95% CI: 63, 122) people, respectively. However, the above-mentioned seasonal effects, limited in their geographical extent, are superimposed on the longer-term near-global-scale changes brought about by the reduced pollution associated with the COVID-19 pandemic.
To quantify the short-term impact of the COVID-19 lockdown on air quality, we first examined the time series of daily PM2.5 variations in the pandemic year 2020, and preceding (2018–2019) and subsequent (2021–2022) baseline years as a function of the Oxford Coronavirus Government Response Tracker (OxCGRT) Stringency Index (SI) in two populous countries (Supplementary Fig. S9). PM2.5 pollution responded swiftly to epidemic containment measures: when the SI experienced sharp rises, PM2.5 dropped rapidly, whereas when restrictions eased, PM2.5 recovered gradually. Remarkably, during the strictest control periods, significant improvements in air quality were observed in China (4 February to 6 March 2020: SI = 79–82)39 and India (1 March to 12 April 2020: SI = 87–100)40 compared to the pre-pandemic era, especially in their highly populated provinces (e.g., Shandong and Henan) or states (e.g., Uttar Pradesh and Madhya Pradesh). The average declines in population-weighted PM2.5 concentrations were 14% and 21%, saving 3111 (95% CI: 2132, 4066) and 7667 (95% CI: 5251, 10,027) lives, respectively. Interestingly, during the post-pandemic era, a striking spatially contrasting pattern emerged as PM2.5 rebounded strongly across the entirety of India, with a notable increase of 27%, resulting in an additional loss of 6653 (95% CI: 4557, 8700) lives. By contrast, in China, PM2.5 did not fully recover and even remained about 4% lower than in 2020, saving 450 (95% CI: 310, 586) lives. This disparity can be primarily attributed to China’s rigid determination to prevent the epidemic under the ‘zero-COVID’ policy (especially after the Omicron outbreak in late 2021)41, as well as the persistent efforts to reduce pollutant emissions42.
A deeper understanding has been attempted to tackle the following important scientific and social questions. What was the global-scale impact of the COVID-19 lockdown on air quality, and did PM2.5 experience a rebound during the post-pandemic era? Also, what were the benefits or losses of the COVID-19 epidemic to public health? To address these questions, we calculated the changes in PM2.5 and attributed premature deaths during the most stringent lockdown periods both before and after the pandemic for each respective country (Fig. 6). Across the globe, most countries had enacted strict measures to counter epidemics (average lockdown duration = 44 days), e.g., ~94% of them recorded a maximum SI surpassing 60, with an average value of 83. This manifested as negative PM2.5 anomalies seen in ~80% of global countries, with larger reductions (> 30%) observed in countries in South Asia, northern Europe, and North Africa (Fig. 6a), primarily attributed to a significant decrease in emissions of major pollutants43, aligning with findings reported in previous studies44,45,46,47. By contrast, opposite growth trends were observed in only a handful of coastal countries in southern South America, Southeast Asia, and southern Europe48. Overall, the global population-weighted PM2.5 in 2020 decreased by ~9% during the lockdown period relative to the pre-pandemic years. The improved air quality resulting from COVID-19 lockdowns yielded significant health benefits for the majority of countries worldwide (Fig. 6b), especially those with dense populations. This led to a notable reduction in the number of premature deaths attributed to short-term PM2.5 exposure, amounting to approximately 19,031 (95% CI: 13,020, 24,915) people on a global scale. Nevertheless, COVID-19 itself was responsible for ~3.3 million deaths in 202049.
In the post-pandemic era, noteworthy disparities emerged in the global change in PM2.5 pollution and the associated mortality burden. Substantial increases in both PM2.5 levels and associated premature deaths were observed across most countries in North America, Europe, North Africa, the Middle East, and South Asia (Fig. 6c, d), primarily attributed to a rapid surge in anthropogenic emissions. By contrast, opposite declining trends were found in the majority of countries spanning South America, South Africa, East and Southeast Asia, and Oceania. In general, approximately 59% of countries have undergone a rebound in PM2.5 levels, while the rest have kept below those of 2020. Although these shifts have yielded both favorable and adverse outcomes for air quality and public health, global PM2.5 levels have encountered an approximate 6% increase, leading to an additional global burden of premature deaths, estimated at around 14,444 (95% CI: 9889, 18,896) people. Nevertheless, only 32% of countries have returned to the levels of pollution seen before the pandemic.
Benefits of 1-km-resolution daily PM2.5 data
To evaluate the added value of the 1 km product for investigating air quality and public health, we conducted a sensitivity analysis by aggregating the 1 km data to 10 km. While the results are similar at the global and country levels, substantial differences exist at finer scales (Supplementary Fig. S10). Compared with 10 km data, our 1 km PM2.5 data pinpoints the PM2.5 pollution and exposure risk at the city level, which concerns the public, as evidenced by a more detailed assessment of pollution inhomogeneity and changes within cities, and the identification of local pollution emissions in populated districts and along transportation routes (brown lines in the figure). This enables us to gain more insights into urban-rural differences, especially in major cities of the world, such as New York City, Sao Paulo, and Johannesburg (the largest cities in the United States, Brazil, and South Africa, respectively), and Rome, Tehran, Seoul, Jakarta, and Guangzhou (the capitals of Italy, Iran, South Korea, Indonesia, and Guangdong Province, China, respectively). In general, the use of 10 km data underestimates daily city-level PM2.5 pollution levels (associated with premature mortality) and especially exposure risk, with an average difference of approximately 5% (4%) and 14% relative to the 1 km data. This underestimation is particularly pronounced within core urban regions, which exhibit larger spatial heterogeneities compared to the suburbs, attributed to the loss of spatial details at coarser resolutions, aligning with the findings of previous studies50,51,52. These results highlight the importance of finer spatial-resolution data for targeted air quality monitoring and health assessment, particularly within urban or suburban scales.
Strengths and Summary
The first global, daily, gapless 1 km PM2.5 dataset has been generated under the veil of big data by incorporating ample input data, such as worldwide ground-based observations related to the surface and population, satellite remote sensing products, meteorological reanalysis, and emission inventories. In particular, MODIS MAIAC satellite AOD retrievals and GEOS Forward Processing (GEOS-FP) AOD simulations are used together to fill the spatial gaps due to the presence of clouds, increasing the data availability by 36%. We have developed a high-performance and explainable ensemble-learning model, which solves the spatiotemporal heterogeneities of air pollutants, as confirmed by various independent spatial and temporal cross-validation approaches. The resulting GlobalHighPM2.5 (i.e., global high-resolution and high-quality PM2.5) dataset, offering global 1 km gapless PM2.5 distributions and variations on a daily basis, will help investigate the health effects of acute PM2.5 exposure, a realm that remains relatively unexplored, particularly at finer urban scales. Compared to the currently available 10 km datasets, the much-improved 1 km grid resolves city districts based on residents’ income levels, providing valuable utility for environmental justice studies.
Taking advantage of this dataset, we conducted an in-depth examination of global daily PM2.5 fluctuations and driving factors, population-exposure risks, and associated mortality burden in each 1 km2 grid. Strong day-to-day PM2.5 variations, inclusive of extreme high-pollution episodes originating from natural disasters and anthropogenic emissions, are well captured. The use of XAI reveals that aerosols and meteorological factors contribute 51% and 34%, respectively, to the variability of global daily PM2.5 estimates. In 2022, 87% of countries, along with nearly all major cities (~99.7%), experienced unhealthy air quality on at least one day. The global fractions of the Earth’s populated area surpassing the WHO-recommended daily PM2.5 exposure thresholds of 15, 25, 37.5, 50, and 75 µg m−3 were 96%, 80%, 56%, 41%, and 23%, respectively. The discrepancies between developed and developing countries rapidly grow as exposure risk levels rise and exposure periods expand. Achieving the objectives of the WHO air quality guidelines globally thus remains a challenge requiring a joint international effort. Our dataset also proved invaluable in capturing the intricate dynamics of PM2.5 pollution and health outcomes resulting from acute events like the global spread of COVID-19. PM2.5 pollution in 80% of countries has decreased, presumably in response to the implementation of the strictest lockdown measures, saving approximately 19.0 (95% CI: 13.0, 24.9) thousand lives. However, after the pandemic, 59% of countries have experienced a rebound in PM2.5 pollution compared to 2020, resulting in 14.4 (95% CI: 9.9, 18.9) thousand lives lost; merely 32% of countries have reverted to the PM2.5 levels experienced prior to the pandemic.
Methods
Big data
Hourly PM2.5 measurements from 2017 and 2022 were collected at approximately ~9500 ground-based monitoring stations around the world (Supplementary Fig. S11). Sources of data include OpenAQ, the China National Environmental Monitoring Centre, the US Environmental Protection Agency, the Canadian National Air Pollution Surveillance Program, the European Air Quality e-Reporting, and other national networks (e.g., South Africa, New Zealand, and Brazil). A substantial majority (~74%) of the stations have been and continue to be dedicated to collecting long-term observations spanning at least two years. Raw data has undergone further quality control measures, including the removal of outliers, such as negative, repeating (occurring for more than three continuous hours), and extreme (exceeding the 99.9th quantiles) values. Subsequently, days having at least 20% of valid hourly PM2.5 measurements were identified and averaged to obtain daily means at each monitoring site22,53. To ensure consistency with auxiliary variables, all daily PM2.5 measurements were adjusted to the UTC time zone and then used for independent training and validation of ML models.
Satellite AOD plays an increasing role in the global mapping of PM2.5 as the number of ground PM2.5 monitoring stations decreases54. The MAIAC AOD product (MCD19A2) has the highest spatial resolution of 1 km among all MODIS operational aerosol products over land with considerable accuracy23. This product was thus selected as the main predictor for estimating PM2.5 concentrations. Terra (~10:30 AM overpass time) and Aqua (~13:30 PM overpass time) MAIAC daily 1 km AOD retrievals at 550 nm with recommended quality assurances53 from 2017 to 2022 were used. Spatially complete AOD assimilations (550 nm) from the GEOS-FP system every 3 hours at a horizontal resolution of 0.25° × 0.3125° were employed to fill satellite AOD gaps. The global AErosol RObotic NETwork (AERONET) network provides instantaneous AOD measurements made at ~500 stations over land every 15 min (Supplementary Fig. S11). Only recommended high-quality (Level 2.0) AOD data55 at 550 nm interpolated by the quadratic polynomial fitting method56 were used to validate the satellite gap-filled AODs.
First, hourly PM2.5 simulations from the GEOS Composition Forecast (GEOS-CF) system at a horizontal resolution of 0.25° × 0.25° were employed57. Considering secondary formation via chemical reactions, four main precursors of PM2.5, i.e., ammonia, nitrogen oxides, sulfur dioxide, and volatile organic compounds, are also involved, provided by the Copernicus Atmosphere Monitoring Service (CAMS) global high-resolution (~0.1° × 0.1°, monthly) emission inventory58. Meteorological variables and their vertical profiles affect air pollution, including temperature, humidity, wind, pressure, precipitation, evaporation, and boundary-layer height. Therefore, these meteorological data were collected from hourly ERA5-Land (~0.1° × 0.1°) and ERA5 global (~0.25° × 0.25°) reanalysis datasets59,60. In addition, population density, economic level, land cover, and terrain changes impacting air pollution were also considered, directly or indirectly represented by highly relevant and available satellite remote sensing products, i.e., global high-resolution annual WorldPop unconstrained population (1 km)61, monthly Visible Infrared Imaging Radiometer Suite (VIIRS) nighttime lights (500 m)62, monthly MOD13A3 normalized difference vegetation index (NDVI; 1 km), and Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM; 90 m) products. In total, 19 independent variables (Supplementary Table 4) were included in this study. Here, the higher-spatial-resolution variables were aggregated, while the low-spatial-resolution variables were resampled to uniform 0.01° × 0.01° grids using the bilinear interpolation approach19 and used for subsequent air pollution modeling.
Air pollution modeling
Here, a tree-based ensemble-learning extremely randomized trees (extra-trees)63 was adopted for modeling air pollutants, whose unique advantages include stronger randomness and an anti-interference ability with reference to other similar types of models of superior performance19,64. The model performance can be significantly improved if the spatiotemporal heterogeneity of air pollution is considered during modeling53. Therefore, for global modeling, we developed a 4-Dimensional Space-Time Extra-Trees (4D-STET) model by introducing Euclidean spherical space and triangular spiral time into the original ML model (Supplementary Note 2) to better describe both the autocorrelations and differences of individual points in spatial locations (e.g., different global hemispheres) and temporal series (e.g., seasonal cycles)65, as evidenced by the superior model performance compared to the traditional method (Supplementary Table 5).
The 4D-STET framework (Supplementary Fig. S12) includes two steps:
-
1.
For satellite AOD gap filling, Terra and Aqua MAIAC AOD retrievals were first combined via linear regression conversion models to minimize the biases caused by different observation times and to expand the spatial coverage53. Available MAIAC AOD retrievals were then used as true values to train the 4D-STET model together with the main GEOS-FP AOD simulations and potentially influencing factors, i.e., spatially continuous meteorological fields (i.e., boundary-layer height, temperature, humidity, wind, and pressure), land cover, and elevation, as well as spatiotemporal terms. Missing satellite retrievals can thus be computed to generate daily gapless AODs (Supplementary Note 3).
Filling in both satellite scanning gaps and missing values in MAIAC AOD retrievals over cloudy and snow/ice-covered scenes and some heavy pollution episodes (Supplementary Fig. S13) with the developed ML model significantly increased the spatial coverage from 64% to 100%, providing spatially continuous AOD information at each 1 km grid cell on any given day (Supplementary Fig. S14). AOD is well reconstructed not only in clean-air regions like North America and most of Europe but also over highly polluted and cloudy regions, including India and eastern China (outlined by red rectangles in the figure), with a higher fraction of missing retrievals in MAIAC AOD products. Our daily gap-filled AODs agree reasonably well with AERONET ground-based AOD measurements, with an average correlation (R) of 0.73, which is only marginally lower when compared to AOD retrievals without gap-filling (R = 0.74). While gap-filling can inherently introduce some uncertainties, it is a potent technique to achieve full AOD coverage. Leveraging the advanced ML model alongside nonlinear interpolation techniques could help minimize this uncertainty. The substantial increase in daily spatial coverage (~36%), accompanied by a nearly three-fold expansion in the training sample size, could arguably outweigh the slight accuracy loss (~1%) in the gap-filled AOD data.
-
2.
For the surface PM2.5 estimation, their ground measurements were regarded as targets, and satellite gap-filled AODs, GEOS-CF PM2.5 simulations, and CAMS pollutant emissions were regarded as main predictors. Auxiliary variables affecting PM2.5 pollution, including all meteorological fields (i.e., boundary-layer height, temperature, humidity, wind, pressure, precipitation, and evaporation), NDVI, nighttime lights, DEM, population, and spatiotemporal terms, were input to the 4D-STET model to establish a robust AOD-PM2.5 relationship. Last, the trained model was employed to retrieve daily PM2.5 concentrations for each grid using gapless AOD and other auxiliary variables, relying on the reconstructed relationship (Supplementary Note 3).
Model validation approach
Sample-based, station-based, and day-based ten-fold cross-validation (10-CV) methods66, three widely used techniques, were used to validate the model, i.e., all data samples, ground monitors, and days were each randomly divided into ten folds, of which nine were used for modeling and one for independent validation. This process ran ten times, in turn, to get the final accuracy after averaging. They were used to evaluate the overall accuracy of the model and its predictive ability in areas and on days without any available observations53. Considering the unbalanced distribution of observation stations and the spatiotemporal cluster characteristics of PM2.5 pollution, we conducted additional cluster-based spatial (including grid-based and state-based) and temporal (including week-based and month-based) CV approaches22,67 to enhance our evaluation by expanding the space and time intervals. The cluster-based spatial CV followed a procedure similar to the station-based CV but utilized grid cells (1° × 1°) and states as geographic units instead. Our dataset comprised ~1930 grid cells and 700 states across the globe, which were then randomly divided into 10 equal folds. Similarly, the cluster-based temporal CV followed a procedure similar to the day-based CV but utilized weeks and months as date units. This enabled us to effectively isolate spatiotemporal autocorrelations among observation stations and thoroughly evaluate the spatiotemporal predictive ability of our model. In the space CV, we also calculated the “within” R2 by including separate intercepts for each station and each year and assessed the model performance in capturing within-location variations over time68. Last, concerning the spatial aggregation in global ground stations, we implemented the continent-stratified CV method by stratifying the monitoring sites within each continent (i.e., North America, South America, Africa, Europe, Asia, and Oceania) and conducting separate space CV22,69 to evaluate the model’s performance across diverse site densities.
Short-term exposure risk assessment
Population-health exposure risks related to daily ambient PM2.5 pollution were assessed according to the global air quality guidelines updated by the WHO in 202115 over a given location. Specifically, daily exposure risks were calculated by counting the proportion of days in a year with daily PM2.5 concentrations exceeding the WHO-recommended short-term air quality guideline (AQG) level (daily PM2.5 = 15 μg m−3) and four interim targets, i.e., IT4 (25 μg m−3), IT3 (37.5 μg m−3), IT2 (50 μg m−3), and IT1 (75 μg m−3), respectively. Alternatively, for every day, we can evaluate the proportion of the global populated area (using the 1 km × 1 km gridded global population database) with PM2.5 pollution exceeding the recommended daily air quality standards.
Impact of the COVID-19 lockdown
2020 was an extraordinary year. Besides being an El Niño fire year, COVID-19 broke out at the beginning of the year and rapidly spread across the world70. In response, countries implemented diverse policies, and the Oxford Coronavirus Government Response Tracker (OxCGRT) project developed a daily Stringency Index (SI, ranging from 0 to 100, reflecting the strictness of responses) based on various relevant metrics closely tied to human activities for each country (see details in Hale et al., 2021)71. This index provides a means to quantify the short-term impact of COVID-19 lockdowns on global air quality. Specifically, we first utilized the SI to identify periods marked by the most stringent measures enacted in each country, defined as the duration showcasing the most significant escalation and decline of the OxCGRT SI, wherein the maximum value surpasses 20. Subsequently, we investigated the improvement and rebound of air quality by calculating the changes in PM2.5 concentrations and associated mortality burden during the most stringent lockdown period for the pre-pandemic (2018–2019) and the post-pandemic (2021–2022) eras compared to the pandemic year (2020). To minimize the influence of meteorological conditions or extreme events like wildfires on our assessment, we used the data that had been adjusted for meteorological factors accordingly72.
Acute mortality burden estimation
Health effects, as well as health exposure guidelines, are generally characterized as long-term, short-term, or acute. While long-term exposure is generally well characterized by annual PM2.524, our daily global PM2.5 data allows us to investigate the health impact of exposure to short-term PM2.5 pollution, a topic attracting more and more public attention. However, unlike long-term studies1, no unified exposure-response function is available10,11,12,13. The acute mortality burden attributable to daily PM2.5 exposure was thus assessed by employing an exposure-response function determined by a meta-analysis from a recent review study14, e.g., the relative risk for mortality from all causes is 1.0065 (95% CI: 1.0044–1.0086) with an increase in daily PM2.5 concentration per 10 μg/m3. The short-term mortality burden attributable to daily PM2.5 pollution can be expressed as:
where \({{MB}}_{g,d}\) represents the short-term mortality burden with estimated premature deaths in grid g on day d; \({{RR}}_{g,d}({C}_{g,d})\) represents the relative risk subject to the daily PM2.5 exposure level in grid g on day d; \({{POP}}_{g,y}\) represents the population in grid g in year y; \({{BMR}}_{i,j,y,c}\) represents the baseline mortality rate for country c in year y; and N represents the number of days in the year. The population data is obtained from the 1 km WorldPop product. To mitigate the impact of the model bias, we made additional adjustments by aligning WorldPop’s grid-specific population number with the country-specific population number reported by the United Nations.
Data availability
Source Data and the global gapless high-resolution and high-quality PM2.5 (GlobalHighPM2.5) dataset generated in this study have been deposited in the Zenodo database [10.5281/zenodo.6449740] and are publicly available. Other data used in this study are provided in the supporting information (Supplementary Note 4).
Code availability
All analyses and visualizations in this study are facilitated by data and codes, which have been deposited in the Zenodo database [https://doi.org/10.5281/zenodo.6449740]. Other mapping and data processing are conducted using ArcGIS, Microsoft Excel, and Python.
References
Murray, C. J. L. et al. Global burden of 87 risk factors in 204 countries and territories, 1990-2019: a systematic analysis for the Global Burden of Disease Study 2019. Lancet 396, 1223–1249 (2020).
Southerland, V. A. et al. Global urban temporal trends in fine particulate matter (PM2.5) and attributable health burdens: estimates from global datasets. Lancet Planet. Health 6, e139–e146 (2022).
Bowe, B. et al. The 2016 global and national burden of diabetes mellitus attributable to PM2.5 air pollution. Lancet Planet. Health 2, e301–e312 (2018).
Pope, C. A. et al. Lung cancer and cardiovascular disease mortality associated with ambient air pollution and cigarette smoke: shape of the exposure-response relationships. Environ. Health Perspect. 119, 1616–1621 (2011).
Turner, M. C. et al. Outdoor air pollution and cancer: an overview of the current evidence and public health recommendations. CA Cancer J. Clin. 70, 460–479 (2020).
Schraufnagel, D. E. The health effects of ultrafine particles. Exp. Mol. Med. 52, 311–317 (2020).
Sinharay, R. et al. Respiratory and cardiovascular responses to walking down a traffic-polluted road compared with walking in a traffic-free area in participants aged 60 years and older with chronic lung or heart disease and age-matched healthy controls: a randomised, crossover study. Lancet 391, 339–349 (2018).
Chen, G. et al. Mortality risk attributable to wildfire-related PM2.5 pollution: a global time series study in 749 locations. Lancet Planet. Health 5, e579–e587 (2021).
Aguilera, R., Corringham, T., Gershunov, A. & Benmarhnia, T. Wildfire smoke impacts respiratory health more than fine particles from other sources: observational evidence from Southern California. Nat. Commun. 12, 1493 (2021).
Chen, R. et al. Fine particulate air pollution and daily mortality. a nationwide analysis in 272 Chinese cities. Am. J. Respir. Crit. Care. Med. 196, 73–81 (2017).
Di, Q. et al. Association of short-term exposure to air pollution with mortality in older adults. JAMA 318, 2446–2456 (2017).
Kloog, I., Ridgway, B., Koutrakis, P., Coull, B. A. & Schwartz, J. D. Long- and short-term exposure to PM2.5 and mortality: using novel exposure models. Epidemiology 24, 555–561 (2013).
Liu, C. et al. Ambient particulate air pollution and daily mortality in 652 cities. N. Engl. J. Med. 381, 705–715 (2019).
Orellano, P., Reynoso, J., Quaranta, N., Bardach, A. & Ciapponi, A. Short-term exposure to particulate matter (PM10 and PM2.5), nitrogen dioxide (NO2), and ozone (O3) and all-cause and cause-specific mortality: Systematic review and meta-analysis. Environ. Int. 142, 105876 (2020).
WHO. WHO global air quality guidelines. Particulate matter (PM2.5 and PM10), ozone, nitrogen dioxide, sulfur dioxide and carbon monoxide. Geneva: World Health Organization. (2021).
Li, Y. et al. Satellite remote sensing for estimating PM2.5 and its components. Curr. Pollut. Rep. 7, 72–87 (2021).
Shin, M. et al. Estimating ground-level particulate matter concentrations using satellite-based data: a review. GIScience Remote Sens. 57, 174–189 (2020).
Xu, X., Zhang, C. & Liang, Y. Review of satellite-driven statistical models PM2.5 concentration estimation with comprehensive information. Atmos. Environ. 256, 118302 (2021).
Wei, J. et al. Reconstructing 1-km-resolution high-quality PM2.5 data records from 2000 to 2018 in China: spatiotemporal variations and policy implications. Remote Sens. Environ. 252, 112136 (2021).
Lary, D. J. et al. Estimating the global abundance of ground level presence of particulate matter (PM2.5). Geospat. Health 8, S611–S630 (2014).
Donkelaar, A. V. et al. Global estimates of ambient fine particulate matter concentrations from satellite-based aerosol optical depth: development and application. Environ. Health Perspect. 118, 847–855 (2010).
Yu, W. et al. Global estimates of daily ambient fine particulate matter concentrations and unequal spatiotemporal distribution of population exposure: a machine learning modelling study. Lancet Planet Health 7, e209–e218 (2023).
Lyapustin, A., Wang, Y., Korkin, S. & Huang, D. MODIS collection 6 MAIAC algorithm. Atmos. Meas. Tech. 11, 5741–5765 (2018).
van Donkelaar, A. et al. Global estimates of fine particulate matter using a combined geophysical-statistical method with information from satellites, models, and monitors. Environ. Sci. Technol. 50, 3762–3772 (2016).
Hammer, M. S. et al. Global estimates and long-term trends of fine particulate matter concentrations (1998-2018). Environ. Sci. Technol. 54, 7879–7890 (2020).
van Donkelaar, A. et al. Monthly global estimates of fine particulate matter and their uncertainty. Environ. Sci. Technol. 55, 15287–15300 (2021).
Wei, J. et al. Ground-Level NO2 surveillance from space across China for high resolution using interpretable spatiotemporally weighted artificial intelligence. Environ. Sci. Technol. 56, 9988–9998 (2022).
Liang, F. C. et al. The 17-y spatiotemporal trend of PM2.5 and its mortality burden in China. Proc. Natl. Acad. Sci. USA 117, 25601–25608 (2020).
Christopher, S. A. & Gupta, P. Satellite remote sensing of particulate matter air quality: the cloud-cover problem. J. Air Waste Manag. Assoc. 60, 596–602 (2010).
Li, Z. et al. Aerosol and boundary-layer interactions and impact on air quality. Natl. Sci. Rev. 4, 810–833 (2017).
Sigsgaard, T. et al. Health impacts of anthropogenic biomass burning in the developed world. Eur. Respir. J. 46, 1577–1588 (2015).
Karanasiou, A. et al. Short-term health effects from outdoor exposure to biomass burning emissions: a review. Sci. Total. Environ. 781, 146739 (2021).
Ren, L. et al. Widespread wildfires over the western United States in 2020 linked to emissions reductions during COVID-19. Geophys. Res. Lett. 49, e2022GL099308 (2022).
Findlay, A. Pantanal fires. Nat. Clim. Chang. 12, 118–118 (2022).
Zhou, X. et al. Excess of COVID-19 cases and deaths due to fine particulate matter exposure during the 2020 wildfires in the United States. Sci. Adv. 7, eabi8789 (2021).
van der Velde, I. R. et al. Vast CO2 release from Australian fires in 2019–2020 constrained by satellite. Nature 597, 366–369 (2021).
Ward, M. et al. Impact of 2019–2020 mega-fires on Australian fauna habitat. Nat. Ecol. Evol. 4, 1321–1326 (2020).
Godfree, R. C. et al. Implications of the 2019–2020 megafires for the biogeography and conservation of Australian vegetation. Nat. Commun. 12, 1023 (2021).
Liu, F. et al. Abrupt decline in tropospheric nitrogen dioxide over China after the outbreak of COVID-19. Sci. Adv. 6, eabc2992 (2020).
Soni, P. Effects of COVID-19 lockdown phases in India: an atmospheric perspective. Environ. Dev. Sustain. 23, 12044–12055 (2021).
Goldberg, E. E., Lin, Q., Romero-Severson, E. O. & Ke, R. Swift and extensive Omicron outbreak in China after sudden exit from ‘zero-COVID’ policy. Nat. Commun. 14, 3888 (2023).
Li, S. et al. Emission trends of air pollutants and CO2 in China from 2005 to 2021. Earth Syst. Sci. Data 15, 2279–2294 (2023).
Cooper, M. J. et al. Global fine-scale changes in ambient NO2 during COVID-19 lockdowns. Nature 601, 380–387 (2022).
Venter, Z. S., Aunan, K., Chowdhury, S. & Lelieveld, J. COVID-19 lockdowns cause global air pollution declines. Proc. Natl; Acad. Sci. USA 117, 18984–18990 (2020).
Venter, Z. S., Aunan, K., Chowdhury, S. & Lelieveld, J. Air pollution declines during COVID-19 lockdowns mitigate the global health burden. Environ. Res. 192, 110403 (2021).
Liu, F., Wang, M. & Zheng, M. Effects of COVID-19 lockdown on global air quality and health. Sci. Total. Environ. 755, 142533 (2021).
He, C. et al. Global, continental, and national variation in PM2.5, O3, and NO2 concentrations during the early 2020 COVID-19 lockdown. Atmos. Pollut. Res. 12, 136–145 (2021).
Hammer, M. S. et al. Effects of COVID-19 lockdowns on fine particulate matter concentrations. Sci. Adv. 7, eabg7670 (2021).
Wang, H. et al. Estimating excess mortality due to the COVID-19 pandemic: a systematic analysis of COVID-19-related mortality, 2020–21. Lancet 399, 1513–1536 (2022).
Paolella, D. A. et al. Effect of model spatial resolution on estimates of fine particulate matter exposure and exposure disparities in the United States. Environ. Sci. Technol. Lett. 5, 436–441 (2018).
Korhonen, A. et al. Influence of spatial resolution on population PM2.5 exposure and health impacts. Air Qual. Atmos. Health 12, 705–718 (2019).
Bai, H., Wu, H., Gao, W., Wang, S. & Cao, Y. Influence of spatial resolution of PM2.5 concentrations and population on health impact assessment from 2010 to 2020 in China. Environ. Pollut. 326, 121505 (2023).
Wei, J. et al. Estimating 1-km-resolution PM2.5 concentrations across China using the space-time random forest approach. Remote Sens. Environ. 231, 111221 (2019).
Tian, Z., Wei, J. & Li, Z. How important is satellite-retrieved aerosol optical depth in deriving surface PM2.5 using machine learning? Remote Sens. 15, 3780 (2023).
Giles, D. M. et al. Advancements in the Aerosol Robotic Network (AERONET) Version 3 database – automated near-real-time quality control algorithm with improved cloud screening for Sun photometer aerosol optical depth (AOD) measurements. Atmos. Meas. Tech. 12, 169–209 (2019).
Wei, J. et al. MODIS Collection 6.1 3 km resolution aerosol optical depth product: global evaluation and uncertainty analysis. Atmos. Environ. 240, 117768 (2020).
Keller, C. A. et al. Description of the NASA GEOS composition forecast modeling system GEOS-CF v1.0. J. Adv. Model Earth Syst. 13, e2020MS002413 (2021).
Granier, C. et al. The Copernicus Atmosphere Monitoring Service global and regional emissions (April 2019 version) Copernicus Atmosphere Monitoring Service (CAMS) report. https://doi.org/10.24380/dObn-kx24316 (2019).
Hersbach, H. et al. The ERA5 global reanalysis. Q. J. R. Meteorol. Soc. 146, 1999–2049 (2020).
Muñoz-Sabater, J. et al. ERA5-Land: a state-of-the-art global reanalysis dataset for land applications. Earth Syst. Sci. Data 13, 4349–4383 (2021).
Lloyd, C. T. et al. Global spatio-temporally harmonised datasets for producing high-resolution gridded population distribution datasets. Big Earth Data 3, 108–139 (2019).
Elvidge, C. D., Zhizhin, M., Ghosh, T., Hsu, F.-C. & Taneja, J. Annual time series of global VIIRS nighttime lights derived from monthly averages: 2012 to 2019. Remote Sens. 13, 922 (2021).
Geurts, P., Ernst, D. & Wehenkel, L. Extremely randomized trees. Mach. Learn. 63, 3–42 (2006).
Wei, J. et al. Himawari-8-derived diurnal variations in ground-level PM2.5 pollution across China using the fast space-time Light Gradient Boosting Machine (LightGBM). Atmos. Chem. Phys. 21, 7863–7880 (2021).
Wei, J. et al. Separating daily 1 km PM2.5 inorganic chemical composition in China since 2000 via deep learning integrating ground, satellite, and model data. Environ. Sci. Technol. 57, 18282–18295 (2023).
Rodriguez, J. D., Perez, A. & Lozano, J. A. Sensitivity analysis of k-fold cross validation in prediction error estimation. IEEE Trans. Pattern Anal. Mach. Intell. 32, 569–575 (2010).
Meyer, H., Reudenbach, C., Hengl, T., Katurji, M. & Nauss, T. Improving performance of spatio-temporal machine learning models using forward feature selection and target-oriented validation. Environ. Model. Softw. 101, 1–9 (2018).
Childs, M. L. et al. Daily local-level estimates of ambient wildfire smoke PM2.5 for the contiguous US. Environ. Sci. Technol. 56, 13607–13621 (2022).
Xue, T. et al. Estimating spatiotemporal variation in ambient ozone exposure during 2013–2017 using a data-fusion model. Environ. Sci. Technol. 54, 14877–14888 (2020).
WHO. Coronavirus Disease (COVID-19) Pandemic. The World Health Organization (2020).
Hale, T. et al. A global panel database of pandemic policies (Oxford COVID-19 government response tracker). Nat. Hum. Behav. 5, 529–538 (2021).
Goldberg, D. L. et al. Disentangling the impact of the COVID-19 lockdowns on urban NO2 from natural variability. Geophys. Res. Lett. 47, e2020GL089269 (2020).
Acknowledgements
This work was supported by the NASA Applied Science Programs 80NSSC21K1980 (Z.L.) and 80NSSC21K0428 (Ju.W.). The MODIS algorithm maintenance program provides support to A.L. The authors greatly thank Lorena Castro from the University of Iowa for collecting and processing the OpenAQ data, Tianshu Xu from the Beijing Normal University for collecting relevant data and calculating the health burden, and Maureen Cribb from the University of Maryland for editing and polishing the paper.
Author information
Authors and Affiliations
Contributions
Z.L. and Ji.W. conceived and designed the study. Ji.W. performed the research and wrote the initial draft of this paper. Z.L., Ji.W., A.L., Ju.W., O.D., J.S., L.S., C.L., and T.Z. reviewed and edited the paper. Ju.W. also provided computing resources and some additional information, including observational data. S.L. assisted in processing the relevant data and calculating the exposure results.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Wei, J., Li, Z., Lyapustin, A. et al. First close insight into global daily gapless 1 km PM2.5 pollution, variability, and health impact. Nat Commun 14, 8349 (2023). https://doi.org/10.1038/s41467-023-43862-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-43862-3
- Springer Nature Limited
This article is cited by
-
Effects of urban-induced mutations on ecology, evolution and health
Nature Ecology & Evolution (2024)