Abstract
Predominantly linear use of wood curtails the potential climate-change mitigation contribution of forestry value-chains. Using lifecycle assessment, we show that more cascading and especially circular uses of wood can provide immediate and sustained mitigation by reducing demand for virgin wood, which increases forest carbon sequestration and storage, and benefits from substitution for fossil-fuel derived products, reducing net greenhouse gas emissions. By United Kingdom example, the circular approach of recycling medium-density fibreboard delivers 75% more cumulative climate-change mitigation by 2050, compared with business-as-usual. Early mitigation achieved by circular and cascading wood use complements lagged mitigation achieved by afforestation; and in combination these measures could cumulatively mitigate 258.8 million tonnes CO2e by 2050. Despite the clear benefits of implementing circular economy principles, we identify many functional barriers impeding the structural reorganisation needed for such complex system change, and propose enablers to transform the forestry value-chain into an effective societal change system and lead to coherent action.
Similar content being viewed by others
Introduction
The forestry value chain is a key pillar of the ‘circular economy’ (CE)1,2,3,4,5 as a major source of renewable biomaterial and can deliver multifaceted climate-change mitigation benefits, including carbon sequestration and avoided emissions from fossil-fuel-derived product substitution6. Global consumption of primary processed wood products is predicted to rise by between 60%7 and 170%8 by 2050, but current value-chains are suboptimal9 and would not sustainably meet future demand under the predominant linear economy model10. There is considerable scope to increase the sustainability of forestry value chains and increase their contribution to achieving net-zero greenhouse gas (GHG) emissions11, in alignment with Paris Agreement12 goals. Currently, decarbonisation and circular economy policies tend to have a narrow sectoral focus, e.g. on the development of zero-emissions energy generation, afforestation for residual carbon offsetting, or increasing use of renewable materials in place of fossil-fuel-derived materials13. Yet there appears to be little cross-sectoral integration of these sustainability objectives and little focus on more circular use and recycling of wood as part of a coherent decarbonisation strategy14,15. There is, therefore, a need for prospective lifecycle assessment (LCA) with widely-defined (multi-use) boundaries, like the present study, to quantify the additional mitigation potential of implementing CE principles in the forestry value-chain, to provide critical evidence for systemic change necessary to deliver rapid and sustained climate-change mitigation.
Transitioning to a CE is a ‘wicked’ problem16,17,18 requiring large socio-economic structural changes and industrial re-organisation19. Hundreds of organisations operate in the forestry value chain at a national level; increasing to many thousands at a global level. To overcome the ‘organising’ challenge that results in suboptimal climate-change mitigation, the forestry value-chain must function as a societal change system (SCS), with shared overarching goals and principles guiding coherent and convergent action20. A high-functioning SCS needs to perform seven critical change functions: system visioning; system organising; resourcing; learning; measuring; advocating; and prototyping to achieve change effectively20. However, no analysis of the forestry value chain as a SCS has yet been performed. Barriers to CE have previously been identified and catalogued as external factors impacting action at an organisation level21,22 (e.g., political, economic, sociological, technological, legal and environmental factors), but not against value-chain system-functioning criteria. SCS analysis of the forestry value chain is needed to identify attributes that limit the system-change functions to determine pragmatic steps to overcome these barriers.
This study aims to address these two important evidence gaps, to inform effective policy and industry actions targeting net-zero GHG emissions. First, we identify wood-use strategies that substantially increase climate-change mitigation by applying dynamic, consequential LCA23 to four wood-use scenarios over a 28-year study period to 2050. Second, we propose key enablers of system change by interviewing forestry value-chain actors on perceived barriers to circularity and by analysing responses against a societal change matrix (of functions needed to achieve system change20). By combining insights from LCA and SCS analysis, we identify what to change and how to change it.
Results and discussion
Analysis of wood use strategies in a UK context
Differentiating value chains using LCA and SCS requires high-resolution data—achieved here using a detailed case study of the UK domestic forestry value chain. UK softwood production and processing supplies around 20% of domestic needs; the UK relies heavily on imports but exports very little24. Since the wood flows out of UK forests mostly remain within national boundaries, traceability is high—making the UK an ideal case study for LCA of a whole forestry value-chain (from the forest through to harvested-wood-product (HWP) end-of-life). We use consequential LCA23 to assess the climate-change mitigation impact—measured as 100-yr global warming potential (GWP) expressed as carbon dioxide equivalent (CO2e) emissions—for business-as-usual (‘BAU’) UK-forestry value-chain softwood use during 2022–2050, accounting for the effects of progressive industrial decarbonisation (i.e. increasing deployment of zero-emissions technology). We then assess three alternative wood-use scenarios to calculate the climate-change mitigation impact of enhanced ‘cascading’, ‘circular’ and ‘cascading&circular’ uses (see below, Methods). Enhanced ‘cascading’ involves more production of sawn wood and less production of wood panels from virgin wood in the UK. Enhanced ‘circular’ involves the manufacture of recycled medium-density fibreboard (MDF) from recovered waste MDF (using currently available commercial technology). ‘Cascading&circular’ combines the two. Confining scenarios to proven cascading and circular uses ensures robust LCA and is a conservative approach (alternative options discussed in Supplementary Methods 1). We modelled the impact of delaying the implementation of these scenarios from year 5 to year 10.
Carbon emissions distribution across value-chain
To observe relative GWP contributions of different components in the value-chain for the ‘BAU’, ‘cascading’, ‘circular’ and ‘cascading&circular’ scenarios, we analyse relevant CO2e emission sources (Scopes 1–4, defined in Fig. 1) in the year 2035.
In all four scenarios, wood panel production is the biggest CO2e emitter—contributing 63% of ‘BAU’ net Scope 1–3 GWP burden, of which around 40% is attributed to Scope 3 emissions from the use of resins (Fig. 1). ‘BAU’ MDF production also involves high Scope 1–3 emissions and high consumption of virgin material (see below, Methods), implying substantial opportunity to reduce GWP burden. ‘Avoided emissions—product substitution’ contributes the largest GWP credits (i.e. emission reductions) across all scenarios (delivered by woodfuel substituting for fossil fuel and sawnwood substituting for concrete in construction, in similar magnitudes). Avoided emissions offsets all value-chain emissions and delivers net negative Scope 1–4 emissions of −2.1 to −3.9 million tonnes of CO2e in 2035.
Compared to ‘BAU’, the ‘cascading’ wood flow scenario has higher ‘sawmill’ emissions, more HWP carbon storage, and lower ‘wood panel production’ emissions, resulting in 35% lower Scope 1–3 emissions overall (Fig. 1). Therefore, greater cascading use is beneficial from a national emissions accounting perspective (since these Scope 1–3 emissions are UK-attributed). However, it does not significantly enhance net GWP reduction (i.e. Scope 1–4 emissions) since imported HWP volumes (and associated emissions) adjust to balance changes in UK production and maintain stable UK consumption (Fig.1). The 7% additional GWP reduction in the ‘cascading’ scenario derives from increased HWP carbon storage in UK-produced sawn wood. ‘Avoided emissions—product substitution,’ credits are unchanged from ‘BAU’ to ‘cascading’ since UK-HWP consumption is static and emissions from UK- and imported-HWP production are equivalent.
Circular use reduces the demand for virgin wood
The greatest differentiating factor across the four scenarios is the net carbon sequestration gain from reduced harvesting (in non-domestic forests) in the circular wood flow scenarios (‘circular’ and ‘cascading&circular’) (Fig. 1). Circular wood flow scenarios reduce consumption of virgin wood relative to ‘BAU’, increasing ‘avoided emissions—reduced harvest’ and delivering GWP credits that offset all (125% of) ‘BAU’ Scope 1–3 emissions. Circular scope 1–3 process emissions are also reduced (because of lower energy demand for recycled-MDF production compared to MDF production), along with imported HWP emissions (due to a net increase in UK-HWP production). Despite reduced avoidance of fossil-fuel emissions due to less waste-wood fuel availability than under ‘BAU’, the ‘circular’ and ‘cascading&circular’ scenarios achieve 85% and 87% larger net (Scope 1–4) GWP reductions in 2035 than under ‘BAU’, and 73% and 75% larger reductions than the ‘cascading’ scenario, respectively.
The largest GWP reduction is achieved by the combined ‘cascading&circular’ scenario, which is 1% more effective at reducing GWP impact than ‘circular’ alone (Fig. 1). This subtle enhancement is because the ‘circular’ scenario also achieves improved cascading use compared to ‘BAU’ wood use due to redirection of virgin material at the forest gate from wood panel production to sawmills. Therefore, the additional cascading material flow enhancements in the combined ‘cascading&circular’ scenario only led to marginal further GWP reductions. Overall, all modelled cascading and circular changes to material flow from ‘BAU’ result in larger GWP reductions, both when considering net Scope 1–3 and net Scope 1–4 GWP emissions.
Climate-change mitigation of circular wood use is resilient to industrial decarbonisation
The relative GWP performance across the four wood-use scenarios in 2035 (Fig. 1) carries over to the dynamic annual net GWP impacts throughout the period 2022–2050 (Fig. 2a–d). Every year, the ‘cascading&circular’ scenario delivers the smallest GWP burden (or largest GWP reduction), followed closely by ‘circular’, whereas ‘cascading’ provides only marginal additional GWP-reduction over ‘BAU’. We apply the same progressive industrial decarbonisation factors to the relevant value-chain components (i.e. processing emissions) in all four scenarios so that both net Scope 1–3 GWP burdens (Fig. 2a, b) and net Scope 1–4 GWP reductions (Fig. 2c, d) shrink over time—the latter reflecting diminishing ‘avoided emissions—product substitution’. Net Scope 1–4 GWP reductions for ‘circular’ and ‘cascading&circular’ wood-use scenarios are less affected by industrial decarbonisation since diminishing (avoided emission) factors do not apply to the dominant biogenic carbon storage credits (‘change in HWP C storage’ and ‘avoided emissions—reduced harvest’).
Early implementation optimises impact
Since annual Scope 1–4 GWP reductions shrink over time, prompt transition to ‘circular’ and ‘cascading’ wood use in the first five years achieves both an earlier and faster rate of cumulative GWP reduction than delaying action by a further five years (Fig. 2c, d). When implemented in year 5, the ‘cascading&circular’ scenario achieves an average annual GWP reduction of −3.7 million tonnes CO2e per year post-implementation and a cumulative reduction of −96.6 million tonnes CO2e by 2050 (Figs. 2c and 3c). However, when implemented in year 10, the respective GWP reductions are −3.4 and −87.5 million tonnes CO2e (Figs. 2d and 3d).
Circularity creates a carbon sink
A ‘net-zero’ (Scopes 1–3) GWP forestry value chain is only achievable by 2050 if circular wood use is implemented. Dynamic results show that annual Scope 1–3 GWP impact (typically the basis for industry-level decarbonisation targets) reduces over time with industrial decarbonisation (Fig. 2a, b). However, these emissions will only reach or surpass net zero by 2050 if ‘circular’ or ‘circular&cascading’ wood use is implemented in parallel with industrial decarbonisation. Implementing the ‘circular’ or ‘circular&cascading’ scenarios achieves (Scope 1–3) net zero by 2050 and thereafter becomes a net carbon sink (Fig. 2a, b).
‘BAU’ annual net Scope 1–3 GWP impact will eventually become net zero when the industry fully decarbonises. ‘BAU’ Scope 1–4 GWP impact will become net zero at the same time since imported-HWP countries are assumed to decarbonise at the same rate as the UK, so ‘avoided emissions—product substitution’ will also become zero. However, while Scope 1–3 emissions and ‘avoided emissions—product substitution’ diminish over time, circular wood use continues to provide annual GWP credits via ‘HWP C storage’ and ‘avoided emissions—reduced harvesting’. Therefore, only ‘circular’ or ‘cascading&circular’ wood use can lead to the forestry value-chain becoming an enduring (Scope 1–4) net carbon sink (even before considering the potential contributions of afforestation and bioenergy with carbon capture and storage (BECCS)).
Circular wood use complements afforestation as a ‘net zero’ strategy
Implementing ‘circular’ or ‘circular&cascading’ wood use achieves considerable immediate GWP reduction, followed by a smaller yet sustained reduction to 2050 (Figs. 2c, d and 3c, d). In comparison, the GWP reduction attainable through ‘afforestation’ (defined in Fig. 3) builds gradually and increases pace as 2050 approaches (Fig. 3c, d). The best-case combined GWP impact of ‘afforestation’ and ‘circular&cascading’ wood use is −258.8 million tonnes CO2e by 2050, while ‘afforestation’ alone will only achieve −162.3 million tonnes CO2e by this year (Fig. 3c). Significant further GWP reduction from ‘afforestation’ will continue to accrue after 2050 from ongoing carbon sequestration in forest growth, and later from HWP6. Therefore, as part of a national net-zero strategy, circular wood use is complementary to the GWP impact of afforestation.
Barriers to circularity
We gathered information on experiential knowledge of barriers to decarbonisation and transitioning to a CE via in-depth semi-structured interviews with seventeen individuals from diverse organisations across the UK forestry value-chain (tree nursery, tree planting, forest management, harvesting, sawmilling, wood panel manufacturing, biotechnology, carbon markets, land agents and trade organisations). We organised and defined the barriers identified by participants under the seven change-function categories needed for an effective SCS20. Twenty-four barriers to change are identified and indicate weaknesses in the performance of every SCS change function in the forestry value chain (Tables 1 and 2).
Shared ‘system visioning’ is the bond needed to create coherent action in multi-stakeholder collaborations25, beginning with a broad global vision that provides common guidance for principles adapted to local conditions20. During interviews, we found there is no clear unifying global vision for the role of forestry in a net-zero CE. Rather, a narrow focus on the fragmented implementation of zero emissions technologies to decarbonise particular operations and subsectors predominates. Participants reported organisation strategy focussing only on decarbonisation or no strategy at all (Table 1). Thus, despite being long-established, we deduce that the UK forestry value chain is not organised appropriately to facilitate complex system change. A SCS requires ‘organising’ of effort and stakeholders in ways that provide coherent aggregation of voice at scale in order to be heard. This can include collaborations and networks of organisations20, such as trade organisations, which are numerous in the UK forestry value chain. During interviews, participants reported a lack of willingness to collaborate and co-ordinate between value-chain stakeholders and stakeholder groups (Table 1), which limits the organising of efforts, shared learning, and therefore effective SCS function.
Mind-set and capacity for learning are key at the individual, organisational, and system levels. Addressing complex change challenges demands new ways of thinking about problems and of taking action. ‘Learning’ change initiatives can include advancement and sharing of knowledge from the prototyping of new technologies or business models; they can also include multi-stakeholder networks that focus on establishing events, interactions, and publications to support realising the vision20. During interviews, we identified a culture where sharing of knowledge and experience is not consistent across the value chain. Interviewees reported slow public release of new forestry research; and a number of important knowledge gaps, such as the exploitable material properties of alternative commercial tree species and the carbon impact of silvicultural practises across different soil types. Wood processors conveyed a negative attitude towards shared learning on the implementation of decarbonisation initiatives (Table 1). Overall, we observed low awareness of the potential role of forestry value chains in a CE.
Adequate financial and personnel resources are essential for change agents to be able to perform their role, individually and collectively20. However, shared ‘resourcing’ barriers are identified by participants from across the value chain, with low operating profit margins and uncertain future wood supply concerns dominating; the latter is compounded by uncertain government land-use subsidies, a convoluted woodland-creation approval process and unpredictable revenue from voluntary carbon markets impeding afforestation. Participants reported that these barriers delay stakeholder decision-making, restrict the ability or willingness to invest in change initiatives, and impede recruitment and retention of skilled labour (Table 2).
A change system requires a social dynamic that motivates and drives change20. However, we found that value-chain stakeholders feel little social pressure to change from either industry peers or consumers—perhaps reflecting an apparent absence of change stewards ‘advocating’ for circular wood value chains. We also found that conservatism towards change and innovation limits ‘prototyping’ of new technologies and also new ways of organising, new policies, new financial products, and ideas to influence consumption. Few examples of large-scale CE demonstration projects have materialised to date (Table 2).
In order to appraise the wider GWP impact and circularity of the forestry value-chain, more holistic ‘measuring’ is needed at the value-chain level to benchmark, reveal opportunities for improvement and then monitor improvements20 toward implementation of CE principles. Participants reported that limited transparency of “waste” wood flows is a barrier to effective value-chain measuring that limits the development of waste-wood markets. There is also a lack of practicable metrics for stakeholders at an organisational level to quantify baseline GWP and circularity performance and to monitor progress (Table 2).
Change initiatives for progress
A shared CE vision for the forestry value chain, functioning as an effective SCS, needs to be agreed upon internationally (Table 1). An effective SCS forestry value-chain could incorporate climate-smart forestry26,27, cascading wood uses28,29, “cyclical materials flows, renewable energy sources and cascading energy flows… to limit the throughput flow of materials and energy to a level that nature tolerates…, respecting their natural reproduction rates”5.
Even with a shared CE vision, coherent-convergent action across the forestry value chain is challenging because of the diverse sub-sectors and scales of businesses, from owner-operators to subsidiaries of global corporations. Trade organisations could play an important organising and influencing role20 in transitioning the forestry value chain towards an effective SCS. However, despite the many shared barriers to change reported across the diverse stakeholders interviewed, there remains a lack of collaboration across numerous trade bodies representing industry sub-sectors. Trade bodies could become multi-stakeholder ‘bridging leaders’30,31 of change by aligning in their individual32 efforts towards the shared vision (Table 1 and Fig. 4).
We suggest that an international group of progressive forestry and wood organisations collaborate to define a shared long-term strategic vision for the role of the forestry value chain in delivering a net-zero CE and develop a roadmap (in consultation with value chain stakeholders) to guide coherent–convergent action, identifying key opportunities and enablers for change, based on scientific evidence. This is foundational for effective change. The next critical step is consistent, widespread advocacy of the vision and roadmap, in order to create energy for change and turn aspiration into action. Change stewards, including trade bodies, must advocate within the forestry value chain to drive collaboration, knowledge-sharing and innovation (supported by creating spaces for stakeholders to collaborate and exchange ideas); and outside the forestry value chain to lobby the government for coherent supporting policies across relevant domains (agriculture/land use, built environment, waste management, climate and environment, energy). Unity of message, aligned to the shared vision, is critical.
Since our LCA analysis provides clear evidence of the climate-change mitigation benefits of circular and cascading forestry value chains, mandates or incentives to recycle waste wood could represent critical control points to maximise climate-change mitigation arising from commercial forestry. Mandating detailed reporting of wood flows—particularly recovered wood use—could reveal opportunities for CE initiatives (such as MDF recycling, recycled-MDF production and increasing sawn wood production) and enable measuring, target-setting and monitoring of progress. It could facilitate enforcement of higher wood recycling rates, as well as broader implementation of extended producer responsibility33 to drive recyclability of HWP by making producers responsible for management of their products when they become waste. Mandatory decommissioning plans at the design phase of construction projects over a threshold value; along with a mandatory materials inventory (including technical specifications, such as timber grade) post-construction phase, could drive up recoverability and recycling of used construction materials. However, to ensure the true development of CE at a global level and to prevent leakage, there also needs to be strong governance on the use of biomass for bioenergy. A key benefit of circular wood use is reduced demand for virgin wood (Figs. 1–3), which would be undermined if the use of virgin wood for bioenergy increased to replace recycled waste wood (fuel).
Creating a funding mechanism for implementing and scaling-up circular economy initiatives in forestry value chains is needed to overcome resourcing barriers in this financially constrained sector. Forestry value-chain businesses are not directly credited for most emissions-reduction or carbon-sequestration gains from improved circularity (Fig. 1) and they will not be motivated or have sufficient resources to invest in operational or structural changes without financial support.
Finally, simplifying and accelerating the planning approval process for productive forest planting would reduce costs, complexity and delays to afforestation. These policy changes would also convey public support for productive forestry, indirectly enhancing staff recruitment prospects and the growth of the sector. This will help to ensure the longevity of domestic wood supply and the ability to meet future demand sustainably, as well as providing important carbon sequestration in the short- and long-term.
In conclusion, we present new evidence substantiating the climate-change mitigation benefit of organising more circular forestry value chains and demonstrate how such value chains could interact with commercial afforestation to deliver immediate and sustained decarbonisation. Using UK examples, we show that implementing ‘cascading and circular’ wood use could deliver 78% more cumulative climate-change mitigation by 2050 than the decarbonisation of linear wood value chains alone. Future expansion of this analysis to include currently speculative circular initiatives is likely to identify further mitigation benefits. Circular wood use can reduce Scope 1–3 process emissions, particularly for recycled-MDF manufacturing, though this is not true across all value chains since extra process steps and energy demand can also lead to higher direct emissions5,34. Most mitigation is achieved via product substitution and increased carbon storage in HWP and forests (via reduced harvest demand, thereby sparing global forest resources for in-situ carbon storage or other benefits). Due to the international trade of wood products, these impacts will cross geo-political boundaries. Going beyond business-level emissions’ accounting is therefore imperative to realise the significant contribution that a more circular forestry value chain could make towards a net-zero circular economy. Governments can support change at scale by introducing coherent policy, regulation, green procurement and financial incentives.
Lack of organisation across the forestry value chain is impeding a transition towards circularity. There is an urgent need for a globally shared vision of CE forestry value chains to organise collective efforts and create energy for change, leading to coherent-convergent action by all. Consistent advocating will create social pressure20 and could stimulate broader collective support for the CE vision, inside and outside the value-chain: in policy, finance, technology and consumer domains. Failing to become an effective SCS and implement circularity initiatives heightens the risk of overshooting Paris Agreement-aligned GHG emissions targets, or worse, increasing biogenic carbon emissions due to forest degradation caused by harvest rates rising with global demand for wood, exacerbated by linear wood use.
Methods
The study was conducted with approval from the College of Environmental Sciences and Engineering—Research Ethics Committee at Bangor University, under the Approval Number COESE2022EF01A.
Goal of the LCA
Dynamic consequential life cycle assessment23 was performed on the UK forestry value chain to calculate the GWP impact of four UK wood flow scenarios (Fig. 5) over the period 2022 to 2050 to quantify the potential climate-change mitigation effect of increasing cascading and circular wood uses. We also compared the GWP impact of the four wood flow scenarios against a UK afforestation scenario to benchmark the impact of increasing cascading and circular wood uses against another core, forest-related ‘net-zero’ GHG emissions strategy.
Wood flow scenarios
The four wood flow scenarios assessed include business as usual (‘BAU’) UK wood use (Fig. 5a) and three scenarios representing increased cascading and circular uses of wood (Fig. 5b–d). Full descriptions of these are provided in Fig. 5, along with graphical representations in the form of Sankey diagrams.
The pathways and scenarios we selected for analysis were governed by the stringent data requirements of the rigorous LCA methodology that we have utilised. We carefully surveyed a range of other existing pathways and scenarios, however due to their complexity and major gaps in available data, none of them met the criteria of being suitable for rigorous LCA. This limitation was particularly acute for upcoming technologies. We provide a further assessment of our choice of wood flow scenarios in Supplementary Methods 1 and consider our approach to be conservative with respect to the conclusions derived.
In the circular and cascading scenarios, we minimised direct changes to ‘BAU’ UK production of (virgin, i.e. not including waste wood) ‘woodfuel’, ‘fence poles’ and ‘other’ HWP as much as possible in order to clearly observe the impacts of the intended key material flow changes, described below. However, due to the complex and dynamic nature of wood flow some changes across UK HWP production volumes were unavoidable. In cascading scenarios (Fig. 5b, d), more material is directed to sawmills, which increases the supply of sawmill residues to woodfuel. We reduced the flow of logs from the forest gate to woodfuel to counter this and to minimise change to the net ‘BAU’ (virgin) UK woodfuel production.
While the total volume (i.e., domestically produced plus imported) of each HWP type is kept the same in all the scenarios, as the domestic value-chain changes from ‘BAU’, the import volumes change in each scenario to maintain the total balance. Therefore, in circular and cascading scenarios (Fig. 5b–d), imported HWP volumes (not shown in Fig. 5) adjust in response to changes in UK HWP production in order to maintain constant UK supply, with the exception of increasing imported woodfuel to replace recycled waste MDF in the circular scenarios (Fig. 5c, d). The latter results in a real net reduction in UK woodfuel consumption in circular scenarios.
Afforestation scenario
The afforestation scenario involves planting 20,000 ha per year from 2022 to 2050, with 50% commercial conifer forest (Sitka spruce) and 50% 50:50 conifer:broadleaf forest (Sitka spruce; Douglas fir; Corsican pine: silver birch; rowan; oak). Harvesting of commercial conifer forest is assumed to commence 50 years after planting, which is beyond the time period considered in this study.
Scope of the LCA
The LCA scope includes ‘UK forestry operations’, ‘UK wood processing’, ‘UK HWP C sequestration’ and ‘UK-bioenergy production’ associated with softwood produced from UK forests, except pulpwood (accounting for 5% of UK harvest) (Fig. 6). Pulp and paper manufacturing is highly partitioned from the rest of the value chain and is excluded from the study. Annual UK softwood harvest is assumed to be constant at 9.5 million green tonnes per year24.
Since we are considering the consequential impact of shifting from ‘BAU’ wood use and because the annual UK harvest rate is constant in all scenarios, UK ‘forest ecosystem’ C sequestration is set to zero in all scenarios. However, for circular scenarios (Fig. 5c, d) that use less virgin wood, gains in forest C sequestration from reducing non-domestic harvesting are calculated (‘Avoided emissions—reduced harvest’).
HWP C-sequestration benefits are also set to zero for ‘BAU’, since we are considering the consequential impact of shifting from ‘BAU’ wood use. ‘HWPs C sequestration’ accounts for an increase/decrease in the UK HWP C pool relative to the ‘BAU’ due to changes in ‘UK wood processing’ (Fig. 6) in the circular and cascading wood flow scenarios (Fig. 5b–d).
To clearly observe the consequential impacts of increasing cascading and circular wood uses, embodied emissions from processing and transport of ‘BAU’ imported HWPs are set to zero. The GWP impact of changes to ‘BAU’ HWP imports (in scenarios 5b–d) is calculated—‘Imported HWP processing (change from ‘BAU’)’ and ‘Imported HWP transport (change from ‘BAU’)’.
Results are presented under Scopes 1 & 2, Scope 3 and Scope 4 emissions’ categories (defined in Fig. 6) in order to provide further insight into where emissions arise in the value chain.
Process emissions
Process GHG emissions are calculated for: ‘UK forestry operations’ (including tree seedling production, site preparation, planting, harvesting and timber transport (from forest to wood processor); ‘UK sawmilling’; ‘UK wood panel production’ (particleboard, MDF and recycled-MDF)); ‘UK woodfuel production’; ‘imported-HWP processing’ (change from ‘BAU’) and ‘imported-HWP transport’ (change from ‘BAU’). GHG emissions are calculated from secondary data (Ecoinvent v.3.539 using OpenLCA v1.7.4), scaled to the four material flows (Fig. 5). The production and transport of all material and energy inputs were accounted for, as were the construction or manufacture of infrastructure and capital equipment. Full life cycle inventories (and impact calculations) are provided in Supplementary Data 1–4 and Source Data, with an example inventory table for the ‘BAU’ wood-flow scenario in Supplementary Table 1. Given that the focus of this paper is on climate-change mitigation, only the global warming potential (IPCC 2013 GWP 100a35) impact category was evaluated, expressed as kg CO2e. The LCA scope includes direct and indirect GHG emissions from wood production, processing, transport and use (Fig. 6). The GHG emissions from wood processing are treated as the same per unit product for equivalent UK- and imported-HWPs, on the basis that most sawmills use wood residues for heat energy and assuming similar average electricity generation emissions and sawmill efficiency across dominant source countries for UK softwood imports.
Terrestrial carbon
Harvest reduction due to recycling MDF (leading to ‘Avoided emissions—reduced harvest’) was calculated as the volume of recycled MDF converted to green tonnes equivalent using conversion factors developed by Forest Research36. We assume that harvest reduction occurs in countries from which imported-HWP are exported, but model forest growth of commercial forest that is typical of UK systems as a proxy for this international effect. Specifically, we assume that a Sitka spruce forest equal to the total area of UK commercial forest, 710,000 ha, shifts from a 50-year harvest rotation, to a 54-year rotation – with the resulting annual harvest reducing by the defined amount. ‘Avoided emissions—reduced harvest’ is calculated as the annualised, 28-year (study period) average gain in forest ecosystem (soil and biomass) carbon as a result of shifting to the longer rotation.
Forest growth, decay and harvest volumes were calculated using the Carbon Budget Model for the Canadian Forest Sector (CBM-CFS3)37, which complies with carbon estimation methods outlined in the 2003 Intergovernmental Panel on Climate Change (IPCC) Good Practice Guidance For Land Use, Land-Use Change and Forestry38, and the 2006 IPCC Guidelines for National GHG Inventories39. It was parameterised using best-fit yield tables from Forest Yield, the standard yield model for forest management in the UK40. For mixed-species forests (defined in the afforestation scenario), aggregate group yield classes (YC) were calculated based on weighted mean YCs. CBM-CFS3 outputs include annual soil and biomass carbon stocks. Calculations thereby account for the decline in annual increment as trees age past the standard rotation age in ‘circular’ scenarios of ‘Avoided emissions—reduced harvest’.
HWP carbon storage
Retirement rates of HWP were calculated according to the IPCC41 simple decay approach. Thus, there is a carbon transfer from domestic forest carbon pools to HWP at the point of harvest, which is emitted from the HWP pool at the time of end-of-life of that HWP. We account for the annual release of carbon to the atmosphere from HWP (including fuelwood), where wood came from domestic harvest. We do not account for imported HWP carbon storage because this is credited back to the exporting countries and would not change in the absence of UK imports. We use IPCC42 and modified HWP decay factors43 to calculate HWP retirement emissions. Emissions from landfill disposal of retired HWP (very low in the UK6) are excluded. ‘UK-HWP C sequestration (change from BAU)’ is calculated as the annualised, 50-year average gain in UK-HWP C as a result of change to UK HWP production in cascading and circular scenarios (Fig. 5b–d) compared to ‘BAU’.
Substitution credits
Substitution credits were calculated following the same method as Forster et al.6 and summarised in the following text. Fuel-to-energy conversion factors (for natural gas and wood chips) were taken from Ecoinvent data (Ecoinvent v.3.539 using OpenLCA v1.7.4) unit processes44 to calculate fossil fuel (natural gas) substitution by dedicated biomass energy generation and incineration with energy recovery for wood waste. Emissions avoidance through the substitution of mineral construction materials was estimated by translating the final mass of construction timber (150 tonnes at 20% moisture per hectare of the thinned forest) into an area of the timber-framed wall using industry-standard design: 0.0175 m3 of timber per 1 m2 wall (BRE IMPACT database45 accessed via eToolLCD® software). 1 m2 of timber frame wall replaces 1 m2 of single skin, 140-mm concrete block and mortar (sand:cement ratio 10:3) wall with 10-mm jointing in typical UK house construction. Avoided emissions were then calculated using emission factors from Ecoinvent for the manufacture of concrete blocks, sand and cement. Substitution credits are subject to progressive decarbonisation factors, outlined in the following section.
Progressive industrial decarbonisation
Projected industrial decarbonisation factors are applied to all process emissions across forestry operations, wood processing and transport—for domestic and imported HWP. They are also applied to substitution credits for avoided (natural gas) electricity generation and concrete production. Decarbonisation assumptions are elaborated in Supplementary Methods 2. Bioenergy with carbon capture and storage (BECCS) deployment is not accounted for, owing to the short time horizon of the study and unpredictable timeline for BECCS technology readiness.
SCS analysis
We captured experiential knowledge of key stakeholders operating in the forestry value chain to identify perceived barriers to CE and then performed SCS analysis to understand the value chain’s capacity for change.
Participants
Fifteen individuals from the membership of the UK Confederation of Forest Industries (Confor) were selected, in consultation with Confor senior leadership, to participate in semi-structured, one-to-one interviews; thirteen agreed to take part. Four participants from outside Confor’s membership were also invited in order to strengthen representation of sub-sectors not prevalent in the membership base, including wood recycling and wood panel manufacturing. We were unable to recruit a participant from the forestry investment sector. Seventeen individuals were interviewed in total. Informed consent was obtained from all participants.
Participants were selected for their level of experience (seniority), area of expertise (sub-sector) and spread of geographical location (to capture variation in experiences from across the UK). Participants mostly represented private sector organisations, but public forestry organisations were also included. Interviews took place online via Microsoft Teams or by telephone. Most interviews lasted between 45 and 60 min, with five lasting 30–45 min. Fourteen were video and audio recorded (with automated transcription). Three were not recorded and notes were taken manually.
Interviews
Participants were asked about decarbonisation and circularity initiatives in their business to determine the experiences (successes and challenges) of each interviewee’s organisation with regard to energy use, energy reduction, carbon reduction and wood-use efficiency. They were then asked broader questions about their sub-sector and the whole value chain regarding barriers and enablers of change towards decarbonisation and circular economy.
Analysis of interview content
Directed content analysis46,47 was applied to whole-interview video recordings and manual notes using a combination of deductive and inductive approaches47. First, we developed an analysis matrix based on the five change sub-systems (column headers) and seven change functions of an effective change system (row headers) to organise the interview data. Synthesised and anonymised interview data is provided in S9.
The five change sub-systems are Technology—research organisations and companies developing new technologies and innovations; Policy—governmental bodies, including regulators and legislators, and other stakeholders that engage in co-production or influencing of rules and policies; Producer—the infrastructure that produces, processes and distributes wood-based products; Consumer—demand for wood-based products and the influence of demand; and Finance—public and private sector capital and organisations innovating in and influencing financial markets.
Every change sub-system must perform the following seven change functions for an effective change system. System Visioning—a shared vision that creates coherence among stakeholders and changes initiatives; System Organising—organising of effort and stakeholders in ways that provide coherent aggregation of voices at scale; Resourcing—provision of financial and personnel resources needed for action; Learning—development and exchange of knowledge arising from prototyping; Prototyping—Developing and testing of new technologies, ways of organising, policies, financial products and ideas; Measuring—assessing progress towards the vision, and identifying opportunities for improvement; and Advocating—social pressure and energy for change. (Definitions adapted from Waddell20).
We synthesised the interview data for the five sub-systems into one whole system, with the barriers still categorised under the seven change functions. We then followed inductive analysis principles to develop further categories within the bounds of the seven change functions in the matrix to describe and group the barriers to change. For example, within the ‘system organising vision’ function category, the following sub-categories were created to group and describe the barriers reported by participants within this function: ‘limited willingness to collaborate’, ‘incoherent policy’, ‘poor waste sorting system’, ‘fragmented land ownership’ and ‘no-centralised co-ordination of multiple small operators.’ This was performed for all seven change-function categories. The concepts discussed were complex and sometimes interconnected, so manual coding was applied to avoid the risk of missing relevant information.
Data availability
Source data are provided in this paper. The data generated in this study are provided in the Supplementary Information and Source Data files. Background data were generated using the publicly available CBM-CFS3 model and extracted from the Ecoinvent v.3.539 database. All subsequent calculations were undertaken using standard MS Excel functions. Source data are provided in this paper.
References
Murray, A., Skene, K. & Haynes, K. The circular economy: an interdisciplinary exploration of the concept and application in a global context. J. Bus. Ethics 140, 369–380 (2017).
Barros, M. V., Salvador, R., do Prado, G. F., de Francisco, A. C. & Piekarski, C. M. Circular economy as a driver to sustainable businesses. Clean. Environ. Syst. 2, 100006 (2021).
Kirchherr, J., Reike, D. & Hekkert, M. Conceptualizing the circular economy: an analysis of 114 definitions. Resources. Resour. Conserv. Recycl. 127, 221–232 (2017).
Ellen MacArthur Foundation. Circular Economy Introduction. Available at https://ellenmacarthurfoundation.org/topics/circular-economy-introduction/overview. Accessed 2nd December 2022.
Korhonen, J., Honkasalo, A. & Seppälä, J. Circular economy: the concept and its limitations. Ecol. Econ. 143, 37–46 (2018).
Forster, E. J., Healey, J. R., Dymond, C. & Styles, D. Commercial afforestation can deliver effective climate change mitigation under multiple decarbonisation pathways. Nat. Commun. 12, 3831 (2021).
FAO. Global forest sector outlook 2050: Assessing future demand and sources of timber for a sustainable economy—background paper for The State of the World’s Forests 2022. FAO Forestry Working Paper, No. 31. Rome. Provisional (2022).
van Romunde, R. Gresham House, Global Timber Outlook 2020: An In-depth Report on the Global Forestry Industry. Octagon Point, 5 Cheapside, London EC2V 6AA (2020).
United Nations (UNECE) and FAO. Circularity concepts in forest-based industries. United Nations Publication ECE/TIM/SP/49 ISSN: 1020 7228 (2021).
Egenolf, V., Distelkamp, M., Morland, C., Beck-O’Briena, M. & Bringezua, S. The timber footprint of German bioeconomy scenarios compared to the planetary boundaries for sustainable roundwood supply. Sustain. Prod. Consum. 33, 686–699 (2022).
Jahan, I., Zhang, G., Bhuiyan, M. & Navaratnam, S. Circular economy of construction and demolition wood waste—a theoretical framework approach. Sustainability 14, 10478 (2022).
United Nations Framework Convention on Climate Change. Paris Agreement. Adoption of the Paris Agreement, 21st Conference of the Parties, Paris: United Nations (2015).
Committee on Climate Change. The Sixth Carbon Budget—The UK’s path to Net Zero. Presented to the Secretary of State pursuant to section 34 of the Climate Change Act 2008. Committee on Climate Change, London (2020).
European Commission. Directorate-General for Communication. Circular Economy Action Plan—For a Cleaner and More Competitive Europe. Publications Office of the European Union https://data.europa.eu/doi/10.2779/05068 (2020).
Ludvig, A. et al. Comparing policy options for carbon efficiency in the wood value-chain: evidence from Austria. J. Clean. Prod. 292, 125985 (2021).
Churchman, C. W. Guest editorial: wicked problems. Manag. Sci. 14, B141–B142 (1967).
Rittel, H. W. J. & Webber, M. M. Dilemmas in a general theory of planning. Policy Sci. 4, 155–169 (1973).
Waddock, S., Meszoely, G. M., Waddell, S. & Dentoni, D. The complexity of wicked problems in large scale change. J. Organ. Change Manag. 28, 993–1012 (2015).
Fragkos, P. Analysing the systemic implications of energy efficiency and circular economy strategies in the decarbonisation context. AIMS Energy 10, 191–218 (2022).
Waddell, S. Societal change systems: a framework to address wicked problems. J. Appl. Behav. Sci. 52, 422–449 (2016).
Kirchherr, J. et al. Barriers to the circular economy: evidence from the European Union (EU). Ecol. Econ. 150, 264–272 (2018).
Neves, S. A. & Marques, A. C. Drivers and barriers in the transition from a linear economy to a circular economy. J. Clean. Prod. 341, 130865 (2022).
Weidema, B. P., Ekvall, T. & Heijungs, R. Guidelines for application of deepened and broadened LCA. Deliverable D18 of work package 5 of the EU 6th Framework Co-ordination Action for innovation in Life-Cycle Analysis for Sustainability (CALCAS) project. Grant agreement ID: 37075 https://lca-net.com/files/calcas_report_d18.pdf. Last accessed 13 September, 2023 (2009).
Forest Research. Forestry Statistics 2022. A Compendium of Statistics about Woodland, Forestry and Primary Wood Processing in the United Kingdom. https://www.forestresearch.gov.uk/tools-and-resources/statistics/forestry-statistics/forestry-statistics-2022/. Accessed 21 May 2022.
Gray, B. G. Collaborating: Finding Common Ground for Multiparty Problems. (Jossey-Bass Publishers, San Francisco, CA, 1989).
Verkerk, P. J. et al. Climate-Smart Forestry: the missing link. For. Policy Econ. 115, 102164 (2020).
Nabuurs, G. J. et al. Climate-Smart Forestry: mitigation impacts in three European regions. From Science to Policy 6. (European Forest Institute, Joensuu, Finland, 2018).
Odegard, I., Croezen, H. & Bergsma, G. Cascading of Biomass. 13 Solutions for a Sustainable Bio-based Economy. Making Better Choices for Use of Biomass Residues, By-products and Wastes. Copyright CE Delft, Delft. https://cedelft.eu/wp-content/uploads/sites/2/2021/04/CE_Delft_2665_Cascading_of_Biomass_def.pdf. Last accessed 13 September, 2023 (2012)
Navare, K., Muys, B., Vrancken, K. C. & Van Acker, K. Circular economy monitoring—how to make it apt for biological cycles? Resour. Conserv. Recycl. 170, 105563 (2021).
Brown, L. D. Bridging organizations and sustainable development. Hum. Relat. 44, 807–831 (1991).
Brown, L. D. Bridge-building for social transformation. Stanford Social Innovation Review 34–39 Winter (2015).
Matsueda, N. Collective versus individual lobbying. Eur. J. Polit. Econ. 63, 101859 (2020).
European Parliament. Directive 2008/98/ec of the European parliament and of the council of 19 November 2008 on waste and repealing certain Directives. Annex 1, Chapter 2, Article 8. Extended producer responsibility. OJ L 312 22.11.2008 (2015). Last accessed 13 September, 2023.
Jarre, M., Petit-Boix, A., Priefer, C., Meyer, R. & Leipold, S. Transforming the bio-based sector towards a circular economy—what can we learn from wood cascading? For. Policy Econ. 110, 101872 (2020).
Stocker, T. F. et al. Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Cambridge University Press, Cambridge, United Kingdom and New York, NY, USA. https://www.ipcc.ch/report/ar5/wg1/. Last accessed 13 September 2023 (2013).
Forest Research. Tools and resources. 2018 conversion factors. https://www.forestresearch.gov.uk/tools-and-resources/statistics/forestry-statistics/forestry-statistics-2018/sources/timber-2/conversion-factors/. Last accessed 20 October, 2023 (2018).
Kurz, W. A. et al. CBM-CFS3: A model of carbon-dynamics in forestry and land-use change implementing IPCC standards. Ecol. Model. 220, 480–504 (2009).
IPCC. Good Practice Guidance for Land Use, Land-Use Change and Forestry. (Published by the Institute for Global Environmental Strategies (IGES) for the IPCC, 2003) https://www.ipcc.ch/site/assets/uploads/2018/03/GPG_LULUCF_FULLEN.pdf. Last accessed 13 September, 2023 (2003).
IPCC. 2006 IPCC Guidelines for National Greenhouse Gas Inventories Volume 4 Chapter 4 http://www.ipcc-nggip.iges.or.jp/public/2006gl/pdf/4_Volume4/V4_04_Ch4_Forest_Land.pdf (2006). Last accessed 13 September, 2023.
Matthews, R. W., Jenkins, T. A. R., Mackie, E. D. & Dick, E. C. Forest Yield: A handbook on forest growth and yield tables for British forestry. https://www.forestresearch.gov.uk/research/forest-yield-a-handbook-on-forest-growth-and-yield-tables-for-british-forestry/. Last accessed 13 September, 2023 (2016)
IPCC. 2006 IPCC Guidelines for National Greenhouse Gas Inventories Volume 4 Chapter 12. https://www.ipcc-nggip.iges.or.jp/public/2006gl/pdf/4_Volume4/V4_12_Ch12_HWP.pdf. Last accessed 13 September, 2023 (2006).
IPCC. 2006 IPCC Guidelines for National Greenhouse Gas Inventories Chapter 3 Appendix 3a https://www.ipcc-nggip.iges.or.jp/public/gpglulucf/gpglulucf_files/Chp3/App_3a1_HWP.pdf. Last accessed 13 September, 2023.
Dymond, C. C. Forest carbon in North America: annual storage and emissions from British Columbia’s harvest, 1965–2065. Carbon Balance Manag. 7, 8 (2012).
Wernet, G. et al. The ecoinvent database version 3 (part I): overview and methodology. Int. J. Life Cycle Assess. 21, 1218–1230 (2016).
BRE. IMPACT database v5 (accessed via etool LCA software) (2018).
Arrasoudi, A., Nabavi, F. H., Armat, M. R., Ebadi, A. & Vaismoradi, M. Directed qualitative content analysis: the description and elaboration of its underpinning methods and data analysis process. J. Res. Nurs. 23, 42–55 (2008).
Elo, S. & Kyngas, S. H. The qualitative content analysis process. J. Adv. Nurs. 62, 107–115 (2008).
Bhatia, P., Ranganathan, J. & World Business Council for Sustainable Development (WBCSD). The GHG Protocol. A Corporate Accounting and Reporting Standard Revised Edition. https://ghgprotocol.org/sites/default/files/standards/ghg-protocol-revised.pdf. Last accessed 13 September, 2023 (2001)
Russell, S. Estimating and Reporting the Comparative Emissions Impacts of Products. Working Paper: World Resources Institute, Washington DC, USA (2019).
Wood Panel Industry Federation. Industry Statistics. https://wpif.org.uk/Industry_Statistics. Last accessed 20 October, 2023 (2022).
Wood Recyclers Association. UK Waste Wood Market Statistics 2020. Obtained from correspondence with Wood Recyclers Association (2022).
Acknowledgements
This work was funded by the UK Natural Environment Research Council (NERC) Envision Doctoral Training Program NE/L002604/1 (awarded to E.F.). Additional CASE studentship funding was provided (to E.F.) by Woodknowledge Wales (Ffarm Moelyci, Felin Hen Road, Tregarth, LL57 4BB, UK) and Coed Cymru (The Forest Hub, Unit 6, Dyfi Eco Park, Machynlleth, Powys, SY20 8AX, UK). The authors are grateful to all interviewees for taking part in this study and to Stuart Goodall from the Confederation of Forest Industries (Confor) for his support in identifying and recruiting interviewees.
Author information
Authors and Affiliations
Contributions
E.F. led the original conception of the study, undertook data collection and analysis, and drafted the paper. D.S. and J.H. participated in the original conception of the study, informed the study design and edited the manuscript. G.N. participated in the original conception of the study and edited the paper.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Prodyut Dhar, Kranti Navare, and the other anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Forster, E.J., Healey, J.R., Newman, G. et al. Circular wood use can accelerate global decarbonisation but requires cross-sectoral coordination. Nat Commun 14, 6766 (2023). https://doi.org/10.1038/s41467-023-42499-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-42499-6
- Springer Nature Limited