Abstract
Membrane efflux pumps play a major role in bacterial multidrug resistance. The tripartite multidrug efflux pump system from Escherichia coli, AcrAB-TolC, is a target for inhibition to lessen resistance development and restore antibiotic efficacy, with homologs in other ESKAPE pathogens. Here, we rationalize a mechanism of inhibition against the periplasmic adaptor protein, AcrA, using a combination of hydrogen/deuterium exchange mass spectrometry, cellular efflux assays, and molecular dynamics simulations. We define the structural dynamics of AcrA and find that an inhibitor can inflict long-range stabilisation across all four of its domains, whereas an interacting efflux substrate has minimal effect. Our results support a model where an inhibitor forms a molecular wedge within a cleft between the lipoyl and αβ barrel domains of AcrA, diminishing its conformational transmission of drug-evoked signals from AcrB to TolC. This work provides molecular insights into multidrug adaptor protein function which could be valuable for developing antimicrobial therapeutics.
Similar content being viewed by others
Introduction
Multidrug resistance refers to the ability of bacterial pathogens to survive lethal doses from many structurally diverse compounds1. Bacterial multidrug resistance continues to spread at alarming rates, threatening human health globally. In 2019, bacterial multidrug resistance directly caused 1.27 million deaths worldwide, which was more than HIV and malaria combined2.
A major mechanism of multidrug resistance is the activity of efflux pumps3,4. Efflux pumps are commonly overexpressed in response to antibiotic exposure, and can export a wide range of chemically diverse compounds, lowering intracellular antibiotic concentration and conferring drug resistance1. The Hydrophobic and Amphiphilic Resistance Nodulation and Cell Division (HAE-RND) family of transporters play a key role in bacterial multidrug resistance. Escherichia coli AcrAB-TolC is the prototypical member of this family with homologues across other gram-negative ESKAPE bacteria5,6,7. It is a tripartite protein complex which spans the membrane envelope of gram-negative bacteria, where AcrB is the inner membrane transporter of the complex, AcrA the periplasmic adaptor protein (PAP) from the Membrane Fusion Protein (MFP) family of proteins, and TolC the outer membrane channel (Fig. 1a). Energised by the proton motive force, AcrB transports substrates, including antibiotics, from the intracellular environment to the outside of the cell, through a sealed channel formed by AcrA and TolC (Fig. 1a)8,9.
a Schematic of AcrAB-TolC complex embedded in the cell envelope. LPS Lipopolysaccharide. b Structure of AcrA isolated from the entire AcrAB-TolC complex (PDB:5O66)23. c Three constructs of AcrA. AcrAL contains Cys25 which is lipidated after signal peptide 1-24 cleavage. AcrAS contains a Cys25Met mutation, and therefore lacks the lipidation and signal peptide. AcrASD contains two AcrAS sequences connected by a TRRIT linker. d Native-MS characterisation of the AcrA constructs at pH 6.0. Proteins buffer was exchanged in 100 mM ammonium acetate buffer prior to MS. AcrAL required the presence of 2× critical micelle concentration (CMC) of DDM at 0.03%. AcrAL presents as a mix of monomers and dimers, AcrAS as monomers and AcrASD as a dimer. Spectra collected on biological replicates and by two different native-MS systems, a time of flight and an orbitrap system, provide confidence these spectral signatures are not artefacts of protein preparation or MS detection67. Envelopes marked with an asterisk (*) represent the higher charge state indicative of intrinsic disorder. Masses found in Supplementary Table 1.
Efforts have been made to develop efflux pump inhibitors (EPIs) against these systems to ‘revive’ the activities of various pre-existing antibiotics, which a bacterial population has become resistant to10. Until now, the focus has been to generate EPIs targeting the AcrB transporter itself. However, previously identified EPIs have failed to progress to clinical trials, due to toxicity issues and the promiscuous nature of AcrB to transport its inhibitors11,12. Thus, there is a need to explore other avenues in the quest to generate successful EPIs, with AcrA emerging as a potential target for inhibition10,13. Recently, NSC 60339 was identified as an AcrA inhibitor through a joint experimental-computational screen10. Previous work suggested NSC 60339 could cause a conformational change in AcrA, and proposed a possible binding site at the interface between the lipoyl and αβ barrel domains, termed site IV (Fig. 1b)10,14. Moreover, AcrA has recently been shown to have more diverse functions, being identified as a bacterial ‘necrosignal’ within E. coli swarms15: when a subpopulation of the swarm dies, dead cells release the necrosignal AcrA, which binds TolC on the outside of other live cells, stimulating efflux within the affected area and the upregulation of various efflux pumps16. Interestingly, recent work has also shown that NSC 60339 can inhibit AcrA-mediated necrosignalling ability16. Understanding the molecular mechanisms of AcrA inhibition is therefore important for future EPI and necrosignalling drug discovery. However, a mechanism of AcrA inhibition remains elusive.
AcrA acts as a flexible adaptor protein between AcrB and TolC, with its elongated shape essential for this function17,18,19. It has been proposed to form a trimer of dimers in the assembled complex to maintain a sealed channel, and accommodate the conformational movement of AcrB as it cycles through its rotational efflux mechanism20. After signal peptide cleavage AcrA is lipidated at Cys25, which anchors it to the inner membrane, although previous studies have shown that the presence of the lipid moiety is not required for AcrA function17,18,21,22. AcrA consists of four linearly arranged domains, the α-helical hairpin, lipoyl, αβ barrel and membrane proximal (MP) domains, each connected by small flexible linkers (Fig. 1b). The αβ barrel and MP domains interact with AcrB, whereas the α-helical domain interacts with the periplasmic, α-helical coiled coils of TolC, where it is proposed to regulate its ‘open’ and ‘closed’ states23.
Here, we used a combination of native and hydrogen/deuterium exchange mass spectrometry (nMS and HDX-MS), molecular dynamics (MD) simulations, biophysical and cellular efflux assays to determine a mechanism of action for the AcrA inhibitor, NSC 6033910,14. Our results suggest that NSC 60339 acts as a molecular wedge within a cleft between the lipoyl and αβ barrel domains of AcrA, reducing its structural dynamics across all four domains. Furthermore, we investigated an efflux substrate, novobiocin, which is known to bind to AcrA, but does not inhibit efflux, revealing minimal change in AcrA dynamics in the presence of novobiocin. We also performed in vivo efflux assays with AcrA mutants, to investigate whether deliberately targeting AcrA at the lipoyl-αβ barrel and the αβ barrel-MP flexible linkers could affect efflux. This confirmed the lipoyl-αβ cleft as a druggable site for targeting AcrA during efflux and revealed a possible site between the αβ barrel-MP domains for future drug design. Overall, our results suggest that NSC 60339 inhibits efflux via restriction of AcrA structural dynamics, which could reduce the efficiency of AcrAB-TolC functional rotation and possibly perturb interactions within the complex itself during efflux and necrosignalling.
Results
To best mimic the periplasmic environment of AcrA - the cytosol is on average 1.7 pH units higher than the external environment—we performed our investigations at pH 6.024,25,26. This will also ensure that our findings are consistent with previous microbiological and biochemical work performed on NSC 60339, which was completed at pH 6.010,14,27. Consequently, our HDX labelling times were amended to accurately represent typical labelling times at physiological pH (see Methods), as pH influences the exchange rates of HDX.
AcrA consists of both structured and disordered regions
To understand AcrA structural dynamics we optimised our sample for investigation by HDX-MS, which provides molecular level information on protein conformation and dynamics28. HDX occurs when amide hydrogens on the peptide backbone become accessible to deuterated buffer, and undergo isotopic exchange with D2O. Accessibility results from structural unfolding and hydrogen bond breakage, thus unstructured regions exhibit rapid exchange when exposed to solvent, whereas regions with stable secondary structures exhibit slower exchange as these regions are protected and stabilised by hydrogen bonding networks. To enable reliable interpretation of the effect of inhibitor and substrate interactions on AcrA dynamics, we explored constructs that would ensure sample homogeneity (Fig. 1c). We monitored oligomeric homogeneity by nMS, which allows intact proteins to be transferred to the gas phase while preserving non-covalent interactions and, thus, is adept at reporting on protein oligomeric states29,30.
We first purified AcrA containing its signal peptide (residues 1–24), which is cleaved after lipidation at Cys25 (AcrAL) (Fig. 1c)27. This construct is associated with the membrane and was therefore purified from the membrane in n-dodecyl-β-d-maltopyranoside (DDM) detergent micelles. nMS revealed AcrAL existed as a mixture of monomers and dimers at pH 6.0 (Fig. 1d); at pH 7.4 AcrAL had increased heterogeneity, forming monomers and up to pentamers (Supplementary Fig. 1). This degree of heterogeneity would complicate HDX-MS interpretation, therefore, we considered AcrA lacking the lipidation (AcrAS), which has previously been shown to retain its functionality and has been utilised in several other studies16,17,18,27. AcrAS lacks its signal peptide (residues 1–24) and has its Cys25 replaced by a starting methionine (Met25). It is expressed and purified from the cytosol and lacks lipidation on its N-terminus. nMS studies of AcrAS revealed it was entirely monomeric at both pH 7.4 and 6.0 (Fig. 1d and Supplementary Fig. 1). Therefore, we decided to proceed with the AcrAS construct for our investigations at pH 6.0.
As AcrA forms a trimer of dimers in the assembled complex8, we also explored an AcrA pseudo-dimer construct (AcrASD) (Fig. 1c). This will enable us to probe the effect of dimerisation on AcrA structural dynamics, and how NSC 60339 inhibition is affected by the presence of a dimer interface. The construct contained two AcrAS sequences connected by a five amino acid linker, and nMS confirms it to be a homogenous pseudo-dimer at pH 6.0 (Fig. 1d).
Aside from elucidating stoichiometry, charge state distributions (CSDs) seen in nMS spectra can report on conformational properties31,32. Interestingly, our nMS spectra indicate AcrA could contain areas of intrinsic disorder in all constructs. nMS spectra of all three constructs present at least two CSDs, reflecting populations of folded and more unstructured conformers occurring during protein ionisation into the gas phase (Fig. 1d and Supplementary Fig. 1). It has been found that mixed CSDs such as these are diagnostic of folded proteins containing areas of intrinsic disorder33. This area is likely to be the MP domain as previously postulated, as it is often unresolved in crystal structures18,34.
Next, we used HDX-MS to assess the intrinsic dynamics of our AcrA constructs. After quench and digestion optimisation on AcrAS (see ‘Methods’ and Supplementary Fig. 2), we could achieve > 95% sequence coverage for our HDX-MS investigations. A relative fractional deuterium uptake analysis of AcrAS reveals areas with time-dependent exchange, characteristic of a folded protein with differences in secondary structure and dynamics (Supplementary Fig. 3). The α-helices show a strong level of protection throughout the entire HDX time course, suggesting this is the most structurally stable area of AcrA. However, peptides within areas of the MP (residues 25–42, 375–380) and αβ barrel domains (residue 264-275) demonstrated near-maximum deuterium incorporation even at the earliest time points (10 s), which is indicative of unstructured regions35. This further supports that the MP domain predominantly contains areas of intrinsic disorder. Expanding on this notion further, we evaluated the structure of AcrA as predicted by AlphaFold2 (Supplementary Fig. 4)36,37. AlphaFold2 provides a per-residue confidence score (pLDDT) between 0-100 for each residue; regions with a score of < 50 may be unstructured. Regions 1–36 and 379–397 are both in the MP domain and contain many residues with a pLDDT score < 50. This is in agreement with our mass spectrometry results that the MP domain contains unstructured regions. Thus, we classify AcrA as a folded protein with areas of intrinsic disorder. This likely benefits AcrA functionally as a PAP, as the periplasm is a dynamic environment that can change size under different conditions, and AcrA is required to be flexible enough to accommodate these changes to maintain a sealed channel in the assembled complex38.
An efflux pump inhibitor, NSC 60339, causes long-range restriction of the AcrA backbone
To explore the effects of NSC 60339 inhibition on AcrAS, we performed differential HDX (ΔHDX) between AcrAS + NSC 60339 and AcrAS alone. ΔHDX analyses the difference between two states and is a sensitive approach to characterise, and localise, the effect of a condition on the structural dynamics of a protein39. For a given peptide, we calculate the amount of deuterium incorporated in each protein state (no drug/NSC 60339/novobiocin) by comparing the centroid m/z for a given time point to a non-deuterated reference sample. In Fig. 2a, we can see that for a representative peptide (residues 308–323), after 1 min the amount of deuterium incorporated is the same for AcrAS without drug and with novobiocin, yet in the presence of NSC 60339 there is > 1 Da reduction in deuterium uptake.
a The m/z spectrum for peptide 308-323 under non-deuterating conditions and deuterating conditions with DMSO, NSC 60339 and novobiocin. The centroid is represented by the dotted line, and the mass change of the deuterated samples is written in Daltons. b Chiclet plot displaying the differential HDX (ΔHDX) plots for AcrAS +/− NSC 60339 for all time points collected. Blue signifies areas with decreased HDX between states. We defined significance to be ± ≥ 0.33 Da change (see ‘Methods’ and Supplementary Fig. 9) with a P value ≤ 0.01 in a two-sided Welch’s t test (8 independent measurements: nbiological = 2 and ntechnical = 4). White areas represent regions with insignificant ΔHDX. Source data are provided as a Source data file. c ΔHDX for ((AcrAS + NSC 60339) – AcrAS) for the latest time point is painted onto the AcrA structure (PDB:5O66) using HDeXplosion and Chimera23,55,56. Zoomed in insert of site IV is shown, with the side chains of implicated residues highlighted14. d Uptake plots for three peptides in different domains of AcrA. Uptake plots are the average deuterium uptake and error bars indicate the standard deviation (8 independent measurements: nbiological = 2 and ntechnical = 4).
In the presence of NSC 60339, AcrAS exhibited stabilisation across all four domains (Fig. 2b, c), with the site IV region—identified as a possible binding site within a cleft between lipoyl and αβ barrel domains by computational modelling and Trp fluorescence spectroscopy14—being affected (Figs. 2c and 3a, b). Portions of site IV exhibited a significant decrease in deuterium uptake in the presence of NSC 60339 (Fig. 2b–d), with peptides including residues F81 and F254 showing decreased uptake. Residues F81 (lipoyl domain) and F254 (αβ barrel domain) are both implicated in NSC 60339 binding with F81 also being essential for efflux function. HDX reduction within these areas may be due to drug binding stabilising the local area through direct interactions with amide hydrogens, or a reduction in solvent accessibility within the implicated domains. Based on the docked structure (Fig. 3a), F81 and F254 bracket site IV but do not make direct contact with NSC 60339. However, in MD simulations, F254 shows reduced fluctuations (Fig. 3d) and both F81 and F254 show reduced solvent-accessible surface area (SASA; Supplementary Fig. 5), demonstrating how binding of NSC 60339 can have allosteric effects on different regions of AcrA. Our HDX-MS and MD data, together with the previous work, supports that site IV is the binding site of NSC 60339.
a Docked structure of NSC 60339 (centre) to AcrA from Darzynkiewicz et al.14. F81 and F254 are shown above and below NSC 60339, respectively. b Zoomed-in view of the NSC 60339 binding pocket cleft. AcrA is shown in a surface representation. c NSC 60339 structure; calculated pKa values for the dihydroimidazoline groups are > 9, suggesting that it is dicationic at pH 6.068. d AcrA coloured according to the difference in root-mean-square fluctuations (RMSF) between simulations of the bound and apo states, averaged over four replicas for each. Red indicates that the RMSF is greater in the bound state while blue indicates it’s greater in the apo state (the colour range is from −2 Å, blue, to 2 Å, red as indicated by the colour bar). RMSF was calculated over the last 70 ns of each 100-ns simulation.
Aside from site IV, our HDX results reveal that NSC 60339 induces long range stabilisation of AcrA structural dynamics away from the NSC 60339 binding site. The α-helical hairpins show stabilisation on both helices and the flexible linker, primarily in the later time points. This is likely due to the stabilisation exhibited by the lipoyl domain due to NSC 60339, restricting the ability of AcrA to freely position the helices, possibly reducing its conformational plasticity. Additionally, the MP domain exhibits extensive protection in the presence of NSC 60339. The largest degree of protection in the MP domain occurs between residues 308–324, with multiple peptides within this region showing a sustained protection throughout the entire HDX time course (Fig. 2b, c). Our findings support that the effects seen in these domains are a downstream effect of NSC 60339 rather than secondary binding sites. Root Mean Square Fluctuations (RMSF) from our MD simulations of the bound and apo states show a high degree of stabilisation of residues 308–324 even compared to other residues (Fig. 3d and Supplementary Fig. 6), supporting our HDX data and providing confidence that NSC 60339 can cause long range stabilisation of dynamics away from the proposed binding site. It has also been shown that AcrA lacking the MP domain is still bound by NSC 60339, advocating that its stabilisation is allosteric to NSC 60339 binding to site IV14. In contrast to the MP domain, the difference in RMSF for the lipoyl domain was modest (Fig. 3d and Supplementary Fig. 6); however, portions of the lipoyl domain did see reduced SASA, possibly explaining the increased protection observed by HDX-MS (Supplementary Fig. 5). Interestingly, some areas of the MP, lipoyl and αβ barrel domains experienced increased SASA in the MD simulations but showed reduced RMSF or HDX (Supplementary Fig. 5). This observation supports that, even with increased solvent accessibility, enhanced protection of the backbone amide to HDX in these regions is likely dominated by its restricted structural dynamics.
As a control and a comparison to NSC 60339, we investigated the effect of novobiocin on AcrAS dynamics. Novobiocin is a substrate of AcrAB-TolC, binds to AcrA and yet does not classify as an EPI10. As before, we performed differential HDX on AcrAS + novobiocin and AcrAS alone (Fig. 2d and Supplementary Fig. 7). Our results show that novobiocin has little observed effect on AcrA structural dynamics within our HDX experiments, which is in stark contrast to NSC 60339. The peptide uptake plots in Fig. 2d show three peptides across three domains that exhibit statistically significant protection when inhibited by NSC 60339 (blue plot). The black plot represents the uptake for a peptide in the presence of novobiocin, and the green plot represents AcrAS alone. As the uptake plots show, there is no difference in deuterium incorporation between AcrAS alone and with novobiocin, even though the percentage of protein:ligand complex was the same (see Methods). As a supporting experiment, we monitored novobiocin binding to AcrAS using nMS (Supplementary Fig. 8 and Supplementary Table 2) and observed the protein:ligand complex. Overall, we observe that while it is a substrate of AcrA, novobiocin does not have global effects on structural dynamics like NSC 60339 (Supplementary Fig. 9). This supports our premise that NSC 60339 is a successful inhibitor of AcrA due to its ability to stabilise AcrA across all four of its domains. AcrA relies on its dynamism and flexibility to function as a PAP19, so restricting this conformational ability may be a promising target for inhibition in general.
NSC 60339 acts in a similar fashion against an AcrA pseudo-dimer
To characterise the effect of dimerisation on AcrA structural dynamics we performed differential HDX between the monomer and dimer (Supplementary Fig. 10). AcrASD experienced areas of decreased HDX compared to AcrAS, and therefore a stabilisation across all four domains. The area that exhibited the largest decrease in ΔHDX was the α-helical hairpins in the latest time point (10 min). This protection could be explained by complementary packing of the α-helical hairpins in the dimer leading to a stabilisation of its structure and possible solvent exclusion in the binding interface40. The MP domain also exhibited protection at the later time points between residues 306–342 and the αβ barrel (residues 261–288) in the early time points (10–60 s), suggesting dimerisation may also provide more structural order to these regions.
Our HDX-MS investigation shows that the AcrASD has unique dynamics compared to the monomer, even though it possesses similar thermal stability to the AcrAS construct, as judged by circular dichroism (CD, Supplementary Fig. 11). This may aid in its association in a complex with AcrB. To test this, we compared the binding of AcrAS and AcrASD to AcrB in SMALP (Styrene Maleic Acid Lipid Particles) nanodiscs using SMA-PAGE, which is a native-PAGE method adapted for use with SMALPs (Supplementary Fig. 12)41,42. It yields stoichiometric information and can reveal protein complex formation. AcrAS appears to bind trimeric AcrB SMALPs in a 1:1 model, as previously reported, yet AcrASD appears to bind trimeric AcrB in a range of different stoichiometries, which were not resolved by SMA-PAGE analysis, suggesting dimerisation promotes higher-order AcrA interaction(s) with trimeric AcrB embedded in a lipid environment27.
To characterise AcrASD interactions with NSC 60339, we used a surface plasmon resonance (SPR) binding assay. For this purpose, AcrAS and AcrASD were immobilised onto a chip at similar densities of 4743 and 4054 response units (RU), respectively and increasing concentrations of NSC 60339 from 6 μM to 200 μM were injected over the immobilised proteins. This was an effective way to qualitatively confirm similar binding of NSC 60339 to the two AcrA variants which suggests that pseudo-dimerisation does not affect the mode of interaction of NSC 60339 with the AcrA binding site (Supplementary Fig. 11).
To investigate if AcrA dimerisation has an effect on NSC 60339 inhibition, we repeated our differential HDX experiments with the AcrASD construct (Fig. 1c). Our results show that NSC 60339 acts in a similar way when AcrA is a dimer (Fig. 4a). There is statistically significant protection across all four domains as seen with AcrAS, with pronounced HDX protection across the lipoyl domain, where site IV is located, suggesting the drug is acting in a similar area. Furthermore, AcrASD exhibits extensive protection in the MP domain, with the core of this stabilisation happening at the same region (residues 306–324). There is also a stabilisation across the α2 helix in the α-helical hairpin; however, fewer peptides and a smaller region compared to AcrAS. One possibility for this may be due to the packing of the hairpins in the dimer already making the region more stable compared to the monomer (Supplementary Fig. 10). Thus, the hairpins may be less effected by NSC 60339 inhibition in the dimer.
a Chiclet plot displaying the differential HDX (ΔHDX) plots for AcrASD +/− NSC 60339 for all time points collected. Blue signifies areas with decreased HDX between states. We defined significance as a ± ≥ 0.35 Da change (see ‘Methods’), with a P value ≤ 0.01 in a two-sided Welch’s t test (7 independent measurements: nbiological = 2 and ntechnical = 3-4). White areas represent regions with insignificant ΔHDX. Source data are provided as a Source data file. b ΔHDX for ((AcrASD + NSC 60339) – AcrASD) for the 10 min time point is painted onto the AcrA structure (PDB:5O66) using HDeXplosion and Chimera23,55,56. c Simulated AcrASD coloured according to the difference in RMSF over the last 70 ns of 100-ns simulations of the bound and apo states, averaged over four replicas for each. Blue indicates that the RMSF is greater in the apo state than the bound state while white indicates they are similar in both states (the colour range is from −2 Å, blue, to 0 Å, white).
Interestingly, we see there is a reduced region of the αβ barrel domain being stabilised, on the other side of site IV. When AcrASD is inhibited with NSC 60339, only residues 232–246 and 249–261 show significant protection, whereas AcrAS shows protection between residues 228–260 and 52–62, which may suggest a difference in how the drug is interacting within the binding site.
Overall, NSC 60339 appears to be inhibiting AcrASD in a similar way, by reducing AcrA’s structural dynamics across the entire protein. To support this hypothesis, we also ran simulations of the bound and apo states of a modelled AcrASD starting from an existing crystal structure (PDB 2F1M)18. A notable reduction in the RMSF for the bound state was observed over most of both copies of the protein compared to the apo state (Fig. 4c and Supplementary Fig. 13).
As before, we also investigated the effect of novobiocin on AcrASD. Novobiocin appeared to have little effect on the structural dynamics of AcrASD, consistent with what our results showed for AcrAS (Supplementary Fig. 14). As with AcrAS, we were able to capture the protein:ligand complex during nMS (Supplementary Fig. 8 and Supplementary Table 2).
Specific targeting of AcrA flexible domain linkers impairs efflux ability in vivo
To determine whether targeting the flexible hinge regions of AcrA could lead to inhibition of antibiotic efflux by AcrAB-TolC in vivo, we next developed a covalent efflux inhibition assay using live E. coli cells. For this purpose, we constructed the plasmid borne acrAB with acrA variants containing unique Cys substitutions in the flexible linkers between the MP and αβ barrel (Leu50Cys, Ile52Cys, Arg225 Cys, Glu229Cys, Asn232Cys) and between the αβ barrel and lipoyl domains (Arg183Cys, Thr205Cys, Asp284Cys) (Fig. 5c). Cells producing the WT and AcrA(Cys)B variants were treated with a Cys-reactive probe MTS-rhodamine 6G (MTS-R6G). This probe is a substrate of AcrAB-TolC and its covalent binding to Cys residues of AcrA located in positions important for conformational flexibility and/or function of the protein is expected to inhibit efflux activity of AcrAB-TolC pump. In this assay, we used hyperporinated E. coli Δ9-Pore cells lacking all nine TolC-dependent transporters and carrying the plasmid borne AcrA(Cys)AcrB variants43. Hyperporination of the OM has eliminated the permeability barrier of the OM and facilitated MTS penetration into the periplasm to reach AcrA(Cys). Cells were pre-treated with MTS, the unreacted probe washed away and the kinetics of efflux of a fluorescent substrate Hoechst 33342 (Hoechst) was analysed.
a Covalent efflux inhibition assay experimental process. MTS-R6G is the Cys reactive probe and Hoechst 33342 is the fluorescent efflux substrate. b E. coli Δ9-Pore cells producing AcrAB-TolC complex carrying the indicated AcrA variants were split into two aliquots and one of the aliquots was treated with a Cys-reactive probe MTS. After incubation for 15 min at 37 °C, cells were washed and the intracellular accumulation of Hoechst was analysed as described previously61. Kinetic data were fitted into a burst-single exponential decay function and the calculated initial rates of Hoechst accumulation (μM/s) are plotted as a function of the externally added concentration of Hoechst61. Plots are the mean and error bars indicate standard deviation (n = 3) from independent measurements. Source data provided as Source data file. c AcrA structure (PDB 5O66) with mutated residues highlighted23. Blue residues have no effect on efflux and orange residues had an effect.
We found that the MTS-R6G pre-treatment of cells producing wildtype AcrAB-TolC or carrying an empty vector did not affect the Hoechst accumulation, suggesting that the two intrinsic Cys residues of AcrB located in the transmembrane domain of the protein do not affect the outcome of the assay (Fig. 5b). We next compared Hoechst accumulation levels in the cells producing different AcrA(Cys) variants and with and without pre-treatment with MTS-R6G. All pumps assembled with AcrA(Cys) variants were as efficient in efflux of Hoechst as the wildtype pump, which is consistent with their ability to protect Δ9-Pore cells from novobiocin, erythromycin and SDS (Supplementary Table 3). The exception is AcrA(Leu50Cys) which appeared to be fully functional in MIC measurement (Supplementary Table 3) but was only partially efficient in efflux of Hoechst (Fig. 5b).
The pre-treatment with MTS-R6G inhibited the activity of AcrA Leu50Cys, Thr205Cys and Asn232Cys variants only, whereas no significant inhibition was seen for other analysed AcrA(Cys) variants (Fig. 5b and Supplementary Fig. 15). Hence, only these Cys residues of AcrA are vulnerable to MTS-R6G binding and inhibition, whereas other Cys residues are either inaccessible in the AcrAB-TolC complex or binding of MTS in these sites does not affect the function of the complex. None of these residues are implicated in the characterised AcrA:AcrB binding sites, so the inhibitory effect on efflux is not due to perturbed interactions in the assembly of AcrAB-TolC44. One possibility for this inhibitory effect is that MTS binding causes the reduction in AcrA conformational flexibility, but definite conclusions on restricted dynamics cannot be drawn here. However, the results show that these three sites within the flexible hinges between AcrA domains are critical for efflux of the AcrAB-TolC pump.
T205 is in site IV, the proposed binding site of NSC 60339, and further evidences this area is a druggable site for AcrA inhibition. Interestingly, two other residues were mutated in site IV, yet had no effect on efflux (R183 and D284). These residues reside on the periphery of site IV (Fig. 5b) and are likely less critical for AcrA function than T205, which in the core of the cleft. Furthermore, T205 showed significant protection in the presence of NSC 60339 in both AcrA constructs, highlighting its importance for AcrA flexibility. The two other residues that had an inhibitory effect on efflux are located away from site IV, at the flexible linker between the αβ barrel-MP domains. N232C and L50C are both located at the bottom of this region and orientated in the same direction (Fig. 5c). The other residues that had no effect on efflux were positioned above N232 and L50 and orientated in the opposite direction. Interestingly, both positions were also found in significantly protected peptides in the presence of NSC 60339 across our HDX-MS experiments. This finding suggests NSC 60339 is stabilising this area downstream from its binding site. Therefore, this provides another druggable site on AcrA for the future design of EPIs.
Discussion
In summary, our findings support that NSC 60339 positions itself in the cleft between the lipoyl and αβ barrel domains (site IV) and causes long-range restriction in backbone dynamics of AcrA across all four of its domains. This behaviour was observed in both monomer and pseudo-dimer constructs. We propose NSC 60339 acts as a molecular wedge within this cleft, significantly restricting the structural dynamics of AcrA, which could have implications for the conformational transitions required during the functional rotation of the AcrAB-TolC pump (Fig. 6). A recent study of the assembled AcrAB-TolC efflux pump in situ confirms that one of the AcrA protomers in the AcrA dimer is anchored to the inner membrane and interacts with AcrB, while also stretching to interact with the peptidoglycan layer and TolC45. The N-terminal region of the second protomer is suggested to interact with the AcrB PC2 subdomain, which undergoes extensive conformational changes throughout the rotational mechanism23. This architecture could allow AcrA to communicate conformational changes in AcrB, to TolC, as it cycles through the rotational mechanism, resulting in TolC transitioning to the ‘open’ state. Thus, NSC 60339 inhibition may result in AcrA losing its ability to accommodate changes across the periplasm and communicate the conformational changes of AcrB to TolC, required for efflux. This could affect the pump in several ways; (1) The interaction of AcrA with AcrB and TolC may become disrupted as AcrA becomes more rigid, (2) AcrA may not be able to maintain a sealed channel during functional rotation, and 3) TolC may not be ‘opened’ as efficiently.
Under normal conditions, as AcrB cycles through its three states of its rotational mechanism (L Loose, T Tight, O Open) the conformational transition information is transmitted through AcrA to TolC, ensuring it is in the ‘open’ state for efflux. AcrA becomes conformationally restricted once NSC 60339 ‘wedges’ between its lipoyl and αβ barrel domains, reducing its ability to transmit the conformational movements of AcrB and, subsequently, inhibiting functional rotation and efflux. Schematic based on in situ structure reported in Chen et al.45.
Recent work has identified AcrA as a necrosignal15,16. Dead cells release AcrA, which binds to TolC in the outer membrane of live cells to send a signal, increasing drug efflux and the expression of other pumps. It has been shown that NSC 60339 can inhibit both efflux and necrosignalling in AcrA16. Furthermore, while novobiocin does not inhibit efflux, as its primary target in bacteria is DNA Gyrase, it can also inhibit necrosignalling, albeit not to the same degree as NSC 6033946. It is proposed that AcrA interacts with TolC via its α-helical hairpin contacting the TolC pore. We show that a global stabilisation of AcrA by NSC 60339 may explain its necrosignalling inhibition ability, possibly by reducing its ability to bind to TolC on the outside of cells. However, novobiocin has also been shown to inhibit necrosignalling in AcrA, and we did not observe a significant effect of its binding on AcrA structural dynamics. Therefore, novobiocin may inhibit necrosignalling in a different fashion, or the structural dynamics may only form part of AcrA’s necrosignalling ability. The necrosignal function of AcrA has only recently been discovered and, therefore, further investigations into the mechanisms of necrosignalling are required to understand this ability, and how best to inhibit it to combat bacterial multidrug resistance generation via this process.
Overall, in this work we propose a mechanism of action for the AcrA inhibitor NSC 60339. This provides a model for targeting the AcrAB-TolC multidrug efflux pump, providing a platform to understand and develop the next generation of EPIs. AcrA has been seen to exhibit interchangeability with other PAPs in non-cognate systems, highlighting its flexibility47. Therefore, uncovering the structural dynamics of AcrA is essential to understanding its role as a flexible PAP within an array of assembled multidrug efflux complexes. More generally, we show how HDX-MS can be used in combination with MD simulations, high-resolution structural information and microbiology assays to understand these dynamics and to determine the molecular mechanisms of inhibition, as previously seen with AcrB48.
Methods
Cloning, expression, and purification
AcrAS
AcrAS lacking the signal peptide residues 1–24, and the site of lipidation Cys25, was cloned in a pET28a plasmid with a 6xHis and LE linker (all primers used for cloning can be found in Supplementary Table 4)17,27. AcrAS is purified from the cytoplasmic fraction as previously reported17. Briefly, pET28a containing AcrAS was transformed into E. coli C43(DE3) ΔacrAB cells. 7 ml of an overnight Luria-Bertani (LB) culture was added to 1 L of pre-warmed LB culture (x6) containing 30 μg/ml kanamycin and grown at 37 °C until an OD600 of 0.6 was reached. The culture was induced with 1 mM IPTG and grown for 3 h at 37 °C. The cells were harvested by centrifugation at 4200 × g for 30 min and washed with ice cold phosphate buffer saline (PBS).
Cell pellets were frozen at −20 °C, and then thawed and resuspended in Buffer A (50 mM sodium phosphate, 150 mM NaCl, 5 mM imidazole, pH 7.4) and supplemented with a protease inhibitor (Roche), 100 mM PMSF, 2 μl Benzonase, 5 mM β-ME and lysozyme. The cell suspension was lysed by sonication at an amplitude of 40, 6 × 15 s with 90 s breaks. Insoluble material was removed by centrifugation at 20,000 × g for 30 min at 4 °C. Membranes were pelleted at 200,000 × g for 1 h at 4 °C.
The supernatant containing the cytosolic fraction was collected and filtered through a 0.22 μm filter (Thermo Fisher Scientific). The sample was loaded onto a 1 ml HiTrap column (GE Healthcare) equilibrated in Buffer B (50 mM sodium phosphate, 300 mM NaCl, 20 mM imidazole, 10% Glycerol, pH 7.4). The column was washed with 20 column volumes (CV) of Buffer B, 10 CV of Buffer B with 50 mM imidazole, and eluted with Buffer B containing 500 mM imidazole. AcrAS was directly loaded onto a HiLoad 16/600 Superdex 200 pg size exclusion chromatography (SEC) column (GE Healthcare) equilibrated in Buffer C (50 mM sodium phosphate, 150 mM NaCl, 10% Glycerol, pH 7.4). A 1 ml min−1 flow rate was used for the HiTrap and SEC column. Peak fractions of AcrAS were pooled and flash frozen at −80 °C. SDS-PAGE and nMS was used to assess purity and concentration was determined via Nanodrop.
AcrAL
AcrAL containing the full length AcrA was amplified from E. coli genomic DNA and cloned into a pET28a plasmid using NcoI and XhoI restriction enzymes, with an LE linker and 6xHis. Cell expression, growth, and lysis was the same as AcrAS.
Membranes were pelleted at 200,000 × g for 1 h at 4 °C. Membrane pellets were resuspended to 40 mg/ml in ice cold Buffer A supplemented with 100 mM PMSF and a protease inhibitor tablet and homogenised with a Potter-Elvehjem Teflon pestle and glass tube. AcrAL was solubilised from homogenised membranes with 1% (w/v) n-dodecyl-β-D-maltoside (DDM) detergent (Anatrace) at 4 °C. Insoluble material was removed by centrifugation at 100,000 × g for 30 min at 4 °C. The HiTrap and SEC stages are the same as above, except the buffers all contained 0.03% (w/v) DDM.
AcrASD
AcrASD containing one AcrAS molecule with a Cys25Ala mutation, a TRRIT linker, and a second AcrAS molecule lacking residues 1–25, and containing an LE linker and 6xHis was cloned into a pET21d+ plasmid using NcoI and XhoI restriction enzymes. For ease of screening potential positives, a BamHI site was engineered into the linker region. Cell expression, growth, and purification was identical to AcrAS except 100 μg/ml ampicillin was used in the cell growth.
AcrB
AcrB was expressed and purified as previously reported48. Briefly, pET15b plasmid containing AcrB was transformed into E.coli C43(DE3) ΔacrAB cells. 7 ml of an overnight LB culture was added to 1 L of pre-warmed LB culture (×6) containing 100 μg/ml ampicillin and grown at 37 °C until an OD600 of 0.6-0.8 was reached. The culture was induced with 1 mM IPTG and grown for 16–18 h at 18 °C. The cells were harvested by centrifugation at 4200 × g for 30 min and washed with ice cold PBS.
The cell pellet was resuspended in Buffer A (50 mM sodium phosphate, 150 mM NaCl, pH 7.4) and supplemented with a protease inhibitor (Roche), 100 μM PMSF, 2 μl Benzonase and 5 mM β-ME. The cell suspension was passed twice through a microfluidizer processor (Microfluidics) at 25,000 psi and 4 °C. Insoluble material was removed by centrifugation at 20,000 × g for 30 min at 4 °C. Membranes were pelleted at 200,000 × g for 1 h at 4 °C (Thermo Fisher Scientific). Membrane pellets were resuspended to 40 mg/ml in ice cold Buffer A supplemented with 100 μM PMSF and a protease inhibitor tablet and homogenised with a Potter-Elvehjem Teflon pestle and glass tube.
AcrB was extracted from the homogenised membranes with 2.5% (w/v) SMA 2000 copolymer for 2 h at room temperature to form native nanodiscs. Insoluble material was removed by centrifugation at 100,000 × g for 30 min at 4 °C. The sample was incubated with 1 ml super nickel NTA agarose affinity resin (Generon) equilibrated in Buffer B (50 mM sodium phosphate, 300 mM NaCl, 20 mM imidazole, 10% Glycerol, pH 7.4) overnight at 4 °C with gentle agitation. The sample was transferred to a gravity flow column and washed with 20 CV of Buffer B, 10 CV of Buffer B with 50 mM imidazole, and eluted with Buffer B containing 500 mM imidazole. AcrB was then buffer exchanged to Buffer C (50 mM sodium phosphate, 150 mM NaCl, 10% Glycerol, pH 7.4) using a PD-10 desalting column (GE Healthcare) and flash frozen at −80 °C. SDS-PAGE was used to assess purify and concentration was determined via Nanodrop.
Native mass spectrometry
Purified AcrAS, AcrASD, AcrAL were exchanged into a volatile solution (100 mM ammonium acetate, pH 6.0/7.4) +/−0.03% DDM using a centrifugal exchange device (Micro Bio-Spin 6, Bio-Rad) according to the manufacturer’s instructions, or via a SEC Superdex 10/200 Increase column at a 0.4 ml/min flow rate. Native mass spectrometry experiments were performed on a Synapt G2-Si mass spectrometer (Waters), or The Q-Exactive Plus UHMR (Thermo Fisher Scientific).
Each sample was loaded into homemade gold-coated borosilicate glass capillaries and mounted onto a Synapt G2-Si mass spectrometer (Waters), where native mass spectrometry experiments were performed. Nano-electrospray ionisation (nESI) was performed, and generated protein ions were drawn into the vacuum of the mass spectrometer. The following instrument parameters were carefully optimised to avoid ion activation and protein unfolding: capillary voltage: 1.4 kV, sampling cone: 30 V, trap DC bias: 15 V, trap collision energy: 2 V, and transfer collision energy: 2 V. Pressures were set to 5.91 × 10−2 mbar in the source region (backing) and to 1.58 × 10−2 mbar in both trap and transfer collision cells (collision gas: He).
For AcrAL, a higher energy was required to release the protein from its hydrophobic environment. The sampling cone therefore was set to 120 V and the trap collision energy 50-200 V. The other instrument parameters were kept the same.
Only AcrAS/SD were measured using The Q-Exactive Plus UHMR (Thermo Fisher Scientific). With samples containing novobiocin, the drug was added to the protein and left to incubate for 30 min prior to MS analysis. The UHMR settings used were: 1.5 kV spray voltage, capillary temperature 60 °C, IST off, Extended trapping 60.
Data were processed and analysed using MassLynx v.4.1 (Waters) and UniDec (v.4.2.2)49.
Preparation of ligands for hydrogen deuterium exchange mass spectrometry
NSC 60339 and novobiocin was purchased from MedChemExpress and Caymen Chemical, respectively. Stock solutions of NSC 60339 (10 mM) and novobiocin (600 μM) were made in 100% DMSO and sonicated for 2–3 h to ensure solubility. Obtaining a maximal percentage of protein:drug complex during deuterium labelling is an important consideration for HDX-MS experiments. NSC 60339 and novobiocin both bind to AcrAS with μM affinity (NSC 60339 with a KD of 78 μM and novobiocin with a KD of 4.3 μM, as measured by previous SPR measurements at pH 6.0)10. To ensure we had maximum protein:drug complex present in our labelling conditions, we used the equation below50:
Protein was incubated with 500 μM NSC 60339 or 30 μM of novobiocin before being diluted into labelling buffer containing the same concentration of drug. 5% DMSO was kept consistent throughout experimentation to ensure drug solubility.
Hydrogen deuterium exchange mass spectrometry
HDX-MS experiments were performed on a nanoAcquity ultra-performance liquid chromatography (UPLC) Xevo G2-XS QTof mass spectrometer system (Waters). Optimised peptide identification and peptide coverage for AcrAS/SD was performed from undeuterated controls. The optimal sample workflow for HDX-MS of AcrAS/SD was as follows: 5 μl of AcrAS/SD (20 μM) was diluted into 95 μl of either equilibration buffer (50 mM sodium phosphate, 150 mM NaCl, 5% DMSO, +/−NSC 60339/Novobiocin, pH 6.0) or labelling buffer (deuterated equilibration buffer) at 20 °C. After fixed times of deuterium labelling, the samples were mixed with 100 μl of quench buffer (formic acid, 1.6 M GuHCl, 0.1% Fos-choline, pH 1.9) to provide a quenched sample at pH 2.4. 70 μl of quenched sample was then loaded onto a 50 μl sample loop before being injected onto an online Enzymate™ pepsin digestion column (Waters) in 0.1% formic acid in water (200 μl/min flow rate) at 20 °C. The peptic fragments were trapped onto an Acquity BEH c18 1.7 μM VANGUARD pre-column (Waters) for 3 min. The peptic fragments were then eluted using an 8–35% gradient of 0.1% formic acid in acetonitrile (40 μl/min flow rate) into a chilled Acquity UPLC BEH C18 1.7 μM 1.0 × 100 mm column (Waters). The trap and UPLC were both maintained at 0 °C. The eluted peptides were ionised by electrospray into the Xevo G2-XS QTof mass spectrometer. MSE data were acquired with a 20–30 V trap collision energy ramp for high-energy acquisition of product ions. Argon was used as the trap collision gas at a flow rate of 2 ml/min. Leucine enkephalin was used for lock mass accuracy correction and the mass spectrometer was calibrated with sodium iodide. The online Enzymate™ pepsin digestion column (Waters) was washed three times with pepsin wash (1.5 Gu-HCl, 4% MeOH, 0.8% formic acid, 0.1% Fos-choline), and a blank run was performed between each sample with pepsin wash without Fos-choline, to prevent significant peptide carryover between runs.
All deuterium time points and controls were performed in triplicate/quadruplicate. Sequence identification was performed from MSE data of digested undeuterated samples of AcrAS/SD using ProteinLynx Global Server 3.0.2 software (Waters). The output peptides were then filtered using DynamX (v. 3.0) using these parameters: minimum intensity of 1481, minimum and maximum peptide sequence length of 5 and 20 respectively, minimum MS/MS products of 1, minimum products per amino acid of 0.11, and a maximum MH+ error threshold of 5 ppm51. All the spectra were visually examined and only those with a suitable signal to noise ratio were used for analysis. The amount of relative deuterium uptake for each peptide was determined using DynamX (v. 3.0) and are not corrected for back exchange since only relative differences were used for analysis and interpretation and there was no benefit from normalising the data52. The only exception is for the HDX heatmap of AcrAS, to which back exchange correction was applied (Supplementary Fig. 3). The relative fractional uptake (RFU) was calculated from the following equation, where Y is the deuterium uptake for peptide a at incubation time t, and D is the percentage of deuterium in the final labelling solution:
A significance level cut off was decided for each dataset based on the quality of the data as previously defined53,54. Confidence intervals for differential HDX measurements of any individual time point were determined according to a two-sided Welch’s T test using HDeXplosion software55. Only peptides which satisfied the corresponding ΔHDX cutoff and a confidence interval of 99% were considered significant. All ΔHDX structure figures were generated from the data using HDeXplosion and Chimera55,56. All supporting data and meta-data are reported in the Source data file (Supplementary Figs. 3, 7, 9, 10, and 14).
Maximally labelled control (MaxD)
5 μl of protein (+/−5% DMSO) was diluted in 95 μl labelling buffer (+/−5% DMSO) at labelled at pH 6.0 for 251 min at 50 °C. This is following the previously determined protocol of labelling for 10 min at pH 7.4 at ~5 °C below the Tm of the protein57. This is to ensure maximum deuterium incorporation of unfolded protein. The deuterium content in the reaction mixture is identical to the corresponding HDX experiment. After 251 min, the proteins were left at room temperature for 2 min, then on ice for 2 min before being flash frozen and stored at −80 °C until LC-MS analysis.
SMA-PAGE native gels
Novex Tris-Glycine Gels (4-20%) were used for the native SMA-PAGE gels (Thermo Fisher Scientific). All native gels were run using Tris-Glycine running buffer (25 mM Tris pH 8.8, 192 mM Glycine). The native loading dye was Novex Tris-Glycine Native Sample Buffer (Thermo Fisher Scientific). SMA-PAGE gels were run at 150 V for 90–120 min at 4 °C. To detect protein, gels were stained with Quick Coomassie Stain (NeoBiotech) according to the manufacturers instructions.
Surface plasmon resonance
AcrAS and AcrASD protein were immobilised using the amine coupling method. For this purpose, CM5 chip (BiaCore) surfaces were activated with 0.05 M N-hydroxysuccinimide and 0.2 M N-ethyl-N-(3 -diethylaminopropyl) carbodiimide. AcrAS and AcrASD were injected over surfaces immediately after activation. After immobilisation, the excess of reactive groups was blocked by injecting 0.5 M ethanolamine HCl (pH 8.0). The immobilisation and subsequent binding experiments were conducted in running buffer containing 20 mM HEPES-KOH (pH 7.0), 150 mM NaCl, and 0.03% DDM supplemented with 5% DMSO. The CM5 chip contains four chambers, whereas the first (control surface) was activated and processed in the same way but the protein was omitted during the immobilisation step. The second and third chambers contained the immobilised AcrAS and AcrASD (ligand). The immobilised densities of both proteins (ligand) were 4743 and 4054 response units (RU), respectively. The sensorgrams were collected and analysed as described before58,59.
Site-directed mutagenesis
All amino acid substitutions in acrA were introduced by QuickChange II XL Site-Directed Mutagenesis Kit using p151acrABHis as the template60. Primer design and Polymerase chain reaction (PCR) reaction for each substitution were performed by following manufacturer’s protocol.
E. coli Δ9-Pore strain (acrB ΔacrD ΔacrEF::spc ΔemrB ΔemrY ΔentS::cam ΔmacB ΔmdtC ΔmdtF attTn7::mini-Tn7T Tpr araC ParaBAD fhuAΔC/Δ4L) was constructed previously43. This strain was used in antibiotic susceptibility and covalent inhibition studies.
Minimal inhibitory concentrations
Susceptibilities of the E. coli Δ9-Pore cells containing plasmid-borne AcrA(Cys)AcrB variants against SDS, Novobiocin, Erythromycin, and Vancomycin, were determined by two-fold broth microdilution. Briefly, overnight cultures were sub-cultured in LB broth (tryptone, 10 g/l; yeast extract, 5 g/l; NaCl, 5 g/l), and cells were grown at 37 °C in a shaker at 225 rpm until OD600 reach to 0.2–0.3. For the proper expression of the pore, L-arabinose (final concentration of 0.1%) was added to each culture, and cells were further grown until OD600 reached 1.0. The minimum inhibitory concentration of each bacterial strain against different antibiotics was measured in 96-well plates. Exponentially growing cells were added to each well and incubated for 18 h. Plates were scanned to determine the final OD600 by Spark 10M microplate reader (TECAN).
Covalent inhibition experiments
Overnight culture of E. coli ∆9-Pore cells carrying p151-AcrABHis plasmid with the indicated substitutions in AcrA were sub-cultured with 0.1% arabinose for 6 h to achieve an OD600 of 1.0. For covalent inhibition of AcrA, cells were split into two aliquots and one aliquot was incubated with 20 μM MTS for 15 min at 37 °C. The comparator cell aliquot was incubated with a blank solvent (dimethyl sulfoxide) under the same conditions. After incubation, cells were washed twice with HMG buffer (50 mM HEPES-KOH buffer pH 7.0, 1 mM magnesium sulfate and 0.4 mM glucose) and resuspended in HMG buffer to an OD600 of ~1.0, at room temperature. Different concentrations of Hoechst were tested to measure the substrate efflux efficiency of each mutant cells by measuring kinetics of Hoechst accumulation at λex = 350 nm and λem = 450 nm. Data were normalised and kinetic parameters were calculated as described previously using a MATLAB program61. Briefly, the time courses of Hoechst uptake (Supplementary Fig. 13) were fit to the burst-single exponential decay function F = A1 + A2 ∙ (1−exp(−kt)), where A1 and A2 describe the magnitude of the fast and slow steps, respectively, and k is the rate of the slow step. The fast and slow steps were attributed to Hoechst binding to the lipids (i.e. in the periplasm) and chromosomal DNA (i.e. in the cytoplasm), respectively. The initial rates for Hoechst accumulation in the cytoplasm were calculated as VI = A2 ∙ k and plotted in Fig. 5b and Supplementary Fig. 15.
Circular dichroism (CD) spectroscopy
All CD spectra were measured in an Aviv Circular Dichroism Spectrophotometer, Model 410. A final protein concentration of 0.4/0.26 mg/ml was used in a quartz rectangular Suprasil demountable cell of 1.0 mm pathlength. Each sample was scanned twice from 260 to 190 nm at 1 nm intervals, with an averaging time of 0.5 s, at temperatures ranging from 25 to 90 °C, with 5 °C increments. DMSO was kept at 0.5%. Spectra analysed on SigmaPlot.
Molecular dynamics simulations
MD simulations of the NSC 60339-bound monomer were initialised using the docked structure from Darzynkiewicz et al.14, while those of the apo used the same structure with the compound removed. Each of the two systems was solvated in an ~(170-Å)3 cubic water box in order to allow for tumbling of the protein without using orientational restraints and ionised with 150 mM NaCl, resulting in a system size of ~476,000 atoms (Supplementary Fig. 16). The dimer system was constructed starting from the AcrA dimer structure in PDB 2F1M18. The MP domain was added based on the monomer structure, and residues in the lipoyl and αβ barrel domains were adjusted to match their positions in the NSC 60339-bound structure, after which the compound was modelled in to both copies of AcrA. Apo and bound systems were solvated in an ~(210-Å)3 cubic water box and ionised with 150 mM NaCl, resulting in a system size of ~906,000 atoms.
Each system was equilibrated for 0.5 ns with all protein and ligand atoms restrained, followed by 4.5 ns with only the protein backbone and ligand atoms restrained. Then, each system was equilibrated for 100 ns in triplicate. Simulations were run using either NAMD2.1462 or NAMD363 depending on the computational resource used, and the CHARMM36m force field64. Force-field parameters for NSC-60339 were generated using the CGenFF webserver65 and are provided as Supplementary Data 2. A time step of 2 fs was used, with short-range non-bonded interactions (cut off of 12 Å with a switching function starting at 10 Å) updated every time step and long-range electrostatics updated every other time step using the particle mesh Ewald method66. A constant temperature of 310 K was maintained using Langevin dynamics, while a constant pressure of 1 atm was maintained using a Langevin piston. All results presented were averaged over three replicas.
All system preparation and analysis were carried out using VMD. RMSF and SASA were measured using VMD’s ‘measure rmsf’ and ‘measure sasa’ functions. In the case of RMSF, the fluctuations are measured using the average position over the sampled frames as a reference. The root-mean-square deviation (RMSD) for individual domains were tracked and are plotted in Supplementary Fig. 17 for the AcrAS and Supplementary Fig. 18 for AcrASD.
Reporting summary
Further information on research design is available in the Nature Portfolio Reporting Summary linked to this article.
Data availability
The HDX-MS data generated in this study have been provided in the Source data file, and the HDX-MS summary tables and uptake plots have been provided as Supplementary Data 1 and 3. Furthermore, the mass spectrometry proteomics data have been deposited to the ProteomeXchange Consortium via the PRIDE partner repository with the dataset identifier PXD041359. The MD simulations generated in this study have been provided as Supplementary Data 2. The protein structures from other publications referenced in this paper are accessible under the PDB accession codes 5O66 and 2F1M. The AlphaFold2 structure was generated from the UniProt entry P0AE06. Source data are provided with this paper.
References
Sun, J., Deng, Z. & Yan, A. Bacterial multidrug efflux pumps: mechanisms, physiology and pharmacological exploitations. Biochem. Biophys. Res. Commun 453, 254–267 (2014).
Murray, C. J. et al. Global burden of bacterial antimicrobial resistance in 2019: a systematic analysis. Lancet 399, 629–655 (2022).
Levy, S. B. & Bonnie, M. Antibacterial resistance worldwide: causes, challenges and responses. Nat. Med. 10, S122–S129 (2004).
Nikaido, H. Multidrug resistance in bacteria. Annu. Rev. Biochem. 78, 119–146 (2009).
Nikaido, H. & Zgurskaya, H. I. AcrAB and related multidrug efflux pumps of Escherichia coli. J. Mol. Microbiol. Biotechnol. 3, 215–218 (2001).
Tseng, T. T. et al. The RND permease superfamily: an ancient, ubiquitous and diverse family that includes human disease and development proteins. J. Mol. Microbiol. Biotechnol. 1, 107–125 (1999).
Rice, L. B. Federal funding for the study of antimicrobial resistance in nosocomial pathogens: no ESKAPE. J. Infect. Dis. 197, 1079–1081 (2008).
Du, D. et al. Structure of the AcrAB-TolC multidrug efflux pump. Nature 509, 512–515 (2014).
Symmons, M. F., Bokma, E., Koronakis, E., Hughes, C. & Koronakis, V. The assembled structure of a complete tripartite bacterial multidrug efflux pump. Proc. Natl Acad. Sci. USA 2009, 26–31 (2009).
Abdali, N. et al. Reviving antibiotics: efflux pump inhibitors that interact with AcrA, a membrane fusion protein of the AcrAB-TolC multidrug efflux pump. ACS Infect. Dis. 3, 89–98 (2017).
Lomovskaya, O. & Bostian, K. A. Practical applications and feasibility of efflux pump inhibitors in the clinic - a vision for applied use. Biochem. Pharmacol. 71, 910–918 (2006).
Lamut, A., Peterlin Mašič, L., Kikelj, D. & Tomašič, T. Efflux pump inhibitors of clinically relevant multidrug resistant bacteria. Med. Res. Rev. 39, 2460–2504 (2019).
Alav, I., Bavro, V. N. & Blair, J. M. A. A role for the periplasmic adaptor protein AcrA in vetting substrate access to the RND efflux transporter AcrB. Sci. Rep. 12, 1–13 (2022).
Darz, Z. M. et al. Identification of binding sites for efflux pump inhibitors of the AcrAB-TolC component AcrA. Biophys. J. 116, 648–658 (2019).
Bhattacharyya, S., Walker, D. M. & Harshey, R. M. Dead cells release a ‘necrosignal’ that activates antibiotic survival pathways in bacterial swarms. Nat. Commun. 11, 1–12 (2020).
Bhattacharyya, S., Bhattacharyya, M., Pfannenstiel, D. M., Nandi, A. K. & Hwang, Y. Efflux-linked accelerated evolution of antibiotic resistance at a population edge. Mol. Cell 82, 4368–4385 (2022).
Zgurskaya, H. I. & Nikaido, H. AcrA is a highly asymmetric protein capable of spanning the periplasm. J. Mol. Biol. 285, 409–420 (1999).
Mikolosko, J., Bobyk, K., Zgurskaya, H. I. & Ghosh, P. Conformational flexibility in the multidrug efflux system protein AcrA. Structure 14, 577–587 (2006).
Hazel, A. J. et al. Conformational dynamics of AcrA govern multidrug efflux pump assembly. ACS Infect. Dis. 5, 1926–1935 (2019).
Pos, K. M. Drug transport mechanism of the AcrB efflux pump. Biochim. Biophys. Acta Proteins Proteomics 1794, 782–793 (2009).
Ge, Q., Yamadah, Y. & Zgurskaya, E. The C-terminal domain of AcrA is essential for the assembly and function of the multidrug efflux pump AcrAB-TolC. J. Bacteriol. 191, 4365–4371 (2009).
Hayashi, K. et al. AcrB-AcrA fusion proteins that act as multidrug efflux transporters. J. Bacteriol. 198, 332–342 (2016).
Wang, Z. et al. An allosteric transport mechanism for the AcrAB-TolC multidrug efflux pump. Elife 6, 1–19 (2017).
Ip, H., Stratton, K., Zgurskaya, H. & Liu, J. pH-induced conformational changes of AcrA, the membrane fusion protein of Escherichia coli multidrug efflux system. J. Biol. Chem. 278, 50474–50482 (2003).
Wang, B., Weng, J., Fan, K. & Wang, W. Interdomain flexibility and pH-induced conformational changes of AcrA revealed by molecular dynamics simulations. J. Phys. Chem. B 116, 3411–3420 (2012).
Wilks, J. C. & Slonczewski, J. L. pH of the cytoplasm and periplasm of Escherichia coli: rapid measurement by green fluorescent protein fluorimetry. J. Bacteriol. 189, 5601–5607 (2007).
Tikhonova, E. B., Yamada, Y. & Zgurskaya, H. I. Sequential mechanism of assembly of multidrug efflux pump AcrAB-TolC. Chem. Biol. 18, 454–463 (2011).
Masson, G. R. et al. Recommendations for performing, interpreting and reporting hydrogen deuterium exchange mass spectrometry (HDX-MS) experiments. Nat. Methods 16, 595–602 (2019).
Liko, I., Allison, T. M., Hopper, J. T. & Robinson, C. V. Mass spectrometry guided structural biology. Curr. Opin. Struct. Biol. 40, 136–144 (2016).
Sharon, M., Ilag, L. L. & Robinson, C. V. Evidence for micellar structure in the gas phase. J. Am. Chem. Soc. 129, 8740–8746 (2007).
Santambrogio, C., Natalello, A., Brocca, S., Ponzini, E. & Grandori, R. Conformational characterization and classification of intrinsically disordered proteins by native mass spectrometry and charge-state distribution analysis. Proteomics 19, 1–9 (2019).
Beveridge, R. et al. A mass-spectrometry-based framework to define the extent of disorder in proteins. Anal. Chem. 86, 10979–10991 (2014).
Borysik, A. J., Kovacs, D., Guharoy, M. & Tompa, P. Ensemble methods enable a new definition for the solution to gas-phase transfer of intrinsically disordered proteins. J. Am. Chem. Soc. 137, 13807–13817 (2015).
Higgins, M. K., Bokma, E., Koronakis, E., Hughes, C. & Koronakis, V. Structure of the periplasmic component of a bacterial drug efflux pump. Proc. Natl Acad. Sci. USA 101, 9994–9999 (2004).
Fowler, M. L. et al. Using hydrogen deuterium exchange mass spectrometry to engineer optimized constructs for crystallization of protein complexes: case study of PI4KIIIβ with Rab11. Protein Sci. 25, 826–839 (2016).
Jumper, J. et al. Highly accurate protein structure prediction with AlphaFold. Nature 596, 583–589 (2021).
Varadi, M. et al. AlphaFold Protein Structure Database: massively expanding the structural coverage of protein-sequence space with high-accuracy models. Nucleic Acids Res. 50, D439–D444 (2022).
Miller, S. I. & Salama, N. R. The gram-negative bacterial periplasm: size matters. PLoS Biol. 16, 1–7 (2018).
Chalmers, M. J., Busby, S. A., Pascal, B. D., West, G. M. & Griffin, P. R. Differential hydrogen/deuterium exchange mass spectrometry analysis of protein-ligand interactions. Expert Rev. Proteomics 8, 43–59 (2011).
Efimov, A. V. Complementary packing of α-helices in proteins. FEBS Lett. 463, 3–6 (1999).
Pollock, N. L. et al. SMA-PAGE: a new method to examine complexes of membrane proteins using SMALP nano-encapsulation and native gel electrophoresis. Biochim. Biophys. Acta Biomembr 1861, 1437–1445 (2019).
Dörr, J. M. et al. The styrene–maleic acid copolymer: a versatile tool in membrane research. Eur. Biophys. J. 45, 3–21 (2016).
Krishnamoorthy, G. et al. Breaking the permeability barrier of Escherichia coli by controlled Hyperporination of the outer membrane. Antimicrob. Agents Chemother. 60, 7372–7381 (2016).
McNeil, H. E. et al. Identification of binding residues between periplasmic adapter protein (PAP) and RND efflux pumps explains PAP-pump promiscuity and roles in antimicrobial resistance. PLoS Pathog. 15, 1–28 (2019).
Chen, M. et al. In situ structure of the AcrAB-TolC efflux pump at subnanometer resolution. Structure 30, 107–113 (2022).
Alt, S., Mitchenall, L. A., Maxwell, A. & Heide, L. Inhibition of DNA gyrase and DNA topoisomerase IV of Staphylococcus aureus and Escherichia coli by aminocoumarin antibiotics. J. Antimicrob. Chemother. 66, 2061–2069 (2011).
Alav, I., Bavro, V. N. & Blair, J. M. A. Interchangeability of periplasmic adaptor proteins AcrA and AcrE in forming functional efflux pumps with AcrD in Salmonella enterica serovar Typhimurium. J. Antimicrob. Chemother. 76, 2558–2564 (2021).
Reading, E. et al. Perturbed structural dynamics underlie inhibition and altered efflux of the multidrug resistance pump AcrB. Nat. Commun. 11, 1–11 (2020).
Marty, M. T. et al. Bayesian deconvolution of mass and ion mobility spectra: from binary interactions to polydisperse ensembles. Anal. Chem. 87, 4370–4376 (2015).
Yang, L., Broderick, D., Jiang, Y., Hsu, V. & Maier, C. S. Conformational dynamics of human FXR-LBD ligand interactions studied by hydrogen/deuterium exchange mass spectrometry: Insights into the antagonism of the hypolipidemic agent Z-guggulsterone. BBA Proteins Proteomics 1844, 1684–1693 (2014).
Sørensen, L. & Salbo, R. Optimized workflow for selecting peptides for HDX-MS data analyses. J. Am. Soc. Mass Spectrom. 29, 2278–2281 (2018).
Eggertson, M. J., Fadgen, K., Engen, J. R. & Wales, T. E. Considerations in the analysis of hydrogen exchange mass spectrometry data. Methods Mol. Biol. 2051, 407–435 (2020).
Calvaresi, V. et al. Conformational dynamics of free and membrane-bound human Hsp70 in model cytosolic and endo-lysosomal environments. Commun. Biol. 4, 1–11 (2021).
Houde, D., Berkowitz, S. A. & Engen, J. R. The utility of hydrogen/deuterium exchange mass spectrometry in biopharmaceutical comparability studies. J. Pharm. Sci. 100, 2071–2086 (2012).
Zhang, N., Yu, X., Zhang, X. & Arcy, S. D. HD-eXplosion: visualization of hydrogen – deuterium exchange data as chiclet and volcano plots with statistical filtering. Bioinformatics 37, 1926–1927 (2021)
Pettersen, E. F. et al. UCSF Chimera — a visualization system for exploratory research and analysis. J. Comput. Chem. 25, 1605–1612 (2004).
Peterle, D., Wales, T. E. & Engen, J. R. Simple and fast maximally deuterated control (maxD) preparation for hydrogen-deuterium exchange mass spectrometry experiments. Anal. Chem. 94, 10142–10150 (2022).
Li, W. et al. Direct inhibition of MmpL3 by novel antitubercular compounds. ACS Infect. Dis. 5, 1001–1012 (2019).
Tikhonova, E. B., Dastidar, V., Rybenkov, V. V. & Zgurskaya, H. I. Kinetic control of TolC recruitment by multidrug efflux complexes. Proc. Natl Acad. Sci. USA 106, 16416–16421 (2009).
Tikhonova, E. B. & Zgurskaya, H. I. AcrA, AcrB, and TolC of Escherichia coli form a stable intermembrane multidrug efflux complex. J. Biol. Chem. 279, 32116–32124 (2004).
Westfall, D. A. et al. Bifurcation kinetics of drug uptake by Gram-negative bacteria. PLoS ONE 12, 1–18 (2017).
Phillips, J. C. et al. Scalable molecular dynamics with NAMD. J. Comput. Chem. 26, 60–76 (2005).
Phillips, J. C. et al. Scalable molecular dynamics on CPU and GPU architectures with NAMD. J. Chem. Phys. 153, 1–33 (2020).
Huang, J. et al. CHARMM36m: an improved force field for folded and intrinsically disordered proteins. Nat. Methods 176, 139–148 (2017).
Vanommeslaeghe, K. et al. CHARMM General Force Field (CGenFF): a force field for drug-like molecules compatible with the CHARMM all-atom additive biological force fields. J. Comput. Chem. 31, 671–690 (2010).
Darden, T., York, D. & Pedersen, L. Particle mesh Ewald: an N·log(N) method for Ewald sums in large systems. J. Chem. Phys. 98, 10089–10092 (1993).
Zubarev, R. A. & Makarov, A. Orbitrap mass spectrometry. Anal. Chem. 85, 5288–5296 (2013).
Haynes, K. M. et al. Identification and structure-activity relationships of novel compounds that potentiate the activities of antibiotics in Escherichia coli. J. Med. Chem. 60, 6205–6219 (2017).
Acknowledgements
Work at King’s College London was supported by a UKRI Future Leaders Fellowship (MR/S015426/1) to E.R. and a King’s College London PhD studentship to B.R.L. This work was also supported by US National Institutes of Health grant R01-AI052293 to H.I.Z., J.M.P., and J.C.G. Computational resources were provided through XSEDE (TG-MCB130173), which is supported by the US National Science Foundation (NSF; ACI-1548562). This research used resources at the Compute and Data Environment for Science (CADES) at ORNL, which is managed by UT Battelle, LLC, for DOE under contract DE-AC05–00OR22725. This work also used the Hive cluster, which is supported by the NSF (1828187) and is managed by the Partnership for an Advanced Computing Environment (PACE) at GT. The Q-Exactive Plus UHMR at the University of Leeds used for native MS was funded by The Wellcome Trust (208385/Z/17/Z). A.J.H. was funded by a BBSRC IPA grant (BB/R018561/1/) in collaboration with GSK and UCB Pharma. The authors thank Valeria Calvaresi for advice with HDX analysis and statistics.
Author information
Authors and Affiliations
Contributions
B.R.L., J.C.G., H.I.Z., and E.R. designed the project; B.R.L., L.M.N.S., D.H., and E.R. performed all mass spectrometry experiments and analysis, except for UHMR measurements that were conducted by A.H. and F.S.; B.R.L., M.M., E.R., and H.I.Z. cloned, purified, and characterised all protein constructs. M.R.U. and H.I.Z. performed bacterial efflux and susceptibility assays and analysis; K.M.K., J.M.P., and J.C.G. carried out molecular docking and dynamics experiments and post-molecular dynamics analyses; F.S., J.M.P., D.H., J.C.G., H.I.Z., and E.R. supervised or financially supported the project; B.R.L., J.C.G., H.I.Z., and E.R. wrote the manuscript with input from the other authors.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Jani Bolla, Beibei Wang, and the other, anonymous, reviewer for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Russell Lewis, B., Uddin, M.R., Moniruzzaman, M. et al. Conformational restriction shapes the inhibition of a multidrug efflux adaptor protein. Nat Commun 14, 3900 (2023). https://doi.org/10.1038/s41467-023-39615-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-39615-x
- Springer Nature Limited