Abstract
Faults often form through reactivation of pre-existing structures, developing geometries and mechanical properties specific to the system’s geologic inheritance. Competition between fault geometry and other factors (e.g., lithology) to control slip at Earth’s surface is an open question that is central to our knowledge of fault processes and seismic hazards. Here we use remote sensing data and field observations to investigate the origin of the 2019 M7.1 Ridgecrest, California, earthquake rupture geometry and test its impact on the slip distribution observed at Earth’s surface. Common geometries suggest the fault system evolved through reactivation of structures within the surrounding Independence dike swarm (IDS). Mechanical models testing a range of fault geometries and stress fields indicate that the inherited rupture geometry strongly controlled the M7.1 earthquake slip distribution. These results motivate revisiting the development of other large-magnitude earthquake ruptures (1992 M7.3 Landers, 1999 M7.1 Hector Mine) and tectonic provinces within the IDS.
Similar content being viewed by others
Introduction
Fault slip distributions are a fundamental metric in earthquake science, illuminating the physical laws and conditions governing deformation1,2, as well as the processes that allow fault systems to grow and interact over geologic time3,4,5. Improved knowledge of fault slip distributions also advances seismic risk mitigation efforts, including the design of fault-crossing infrastructure (e.g., Trans-Alaska oil pipeline6) and potentially reducing uncertainty in ground-motion models7. The vast majority of slip measurements along active faults are made at Earth’s surface. Thus, many insights gained from analyzing slip distributions depend implicitly on the physics of surface rupture, and its relation to slip along deeper portions of faults where most of the seismic moment is released, two factors that remain poorly understood.
In an idealized mechanical model—a planar fault in a homogeneous, isotropic, linear elastic material with uniform driving stress – the along-strike slip distribution is elliptical and smoothly varying8, which is atypical for slip distributions observed in nature. For instance, coseismic slip distributions often are asymmetric4 and/or characterized by significant short-length-scale variations9. Recent investigations of fault slip distributions at Earth’s surface have focused on the effects of off-fault plasticity10,11,12, structural complexity (e.g., steps and multiple fault strands)13, fault zone maturity5, and along-strike lithologic heterogeneities14. Yet even in a homogeneous continuum, mechanical models have shown that nonelliptical slip distributions can result from fault nonplanarity15,16, which also can control dynamic rupture propagation and arrest17,18,19,20.
Many crustal faults develop along pre-existing structures21 (e.g., joints22 and dikes23), which often leads to nonplanarity during progressive slip, growth, and linkage of non-coplanar segments24,25. Even during a single event, an earthquake rupture may activate pre-existing structures leading to unexpected propagation paths. For instance, the southernmost section of the 2013 M7.7 Balochistan, Pakistan, earthquake rupture produced a zigzag pattern, where alternating kilometer-scale segments apparently exploited a penetrative fabric that accommodates regional shortening at the plate margin26. Similarly, secondary ruptures associated with the 1905 M~8 Bulnay, Mongolia, earthquake likely followed pre-existing (unspecified) structures, whereas the damage distribution appeared to be lithologically-controlled27. Despite the ubiquity of fault nonplanarity, however, the relative sensitivity of slip at Earth’s surface to rupture geometry versus other factors (e.g., lithology and structural complexity) remains unknown.
The arid setting and thorough documentation28 of the 2019 M7.1 Ridgecrest earthquake rupture make it an ideal target for investigating the effects of geologic inheritance and fault geometry on earthquake slip distributions. The M7.1 mainshock was the latter of two surface-breaking earthquakes that ruptured the Salt Wells Valley and Paxton Ranch fault zones, located north of the Garlock Fault and east of the Sierra Nevada where the southern Walker Lane meets the Eastern California Shear Zone28 (ECSZ; Fig. 1). Right-lateral shear deformation likely initiated in the Walker Lane and ECSZ ~6–12 Ma29,30 and their faults are frequently described as structurally immature, because they record relatively low (<25 km) cumulative displacement31. Nonetheless, California’s three largest surface-rupturing earthquakes over the last three decades, including the 1992 M7.3 Landers, 1999 M7.1 Hector Mine, and 2019 M7.1 Ridgecrest earthquakes, in addition to the 1872 M7.4 Owens Valley earthquake, occurred in this region32. Notably, these events all ruptured Mesozoic granitic bedrock intruded by the late Jurassic Independence dike swarm33 (IDS; Fig. 1).
The IDS is a significant northwest-trending tectonic feature in eastern California, 10–40 km wide and stretching >600 km from the central Sierra Nevada to the southern Mojave Desert33,34,35,36,37 (Fig. 1). Abrupt IDS emplacement at 148 Ma has been attributed to injection either during a brief period of extension following the Nevadan Orogeny35 or into a left-oblique shear zone that emerged along the magmatic arc as relative plate motions shifted38. The latter interpretation is supported by individual dike trends oriented ~10–30° counterclockwise to the overall IDS trend and sinistral shear fabrics that developed within and along the dikes during and immediately following emplacement33,38. Compositional analyses of the dikes and their host plutons suggest predominantly vertical propagation from a mafic magmatic source at an unknown depth33,39. Given the average (1.5 m) and maximum (18 m) reported apertures, the dikes likely extended subvertically for at least several kilometers in their initial state39,40,41 (Supplementary Note 1). Previous studies proposed that during intrusion, the dikes exploited a pre-existing regional joint set based on the abundance of dike-parallel opening-mode fractures in the host granitoids surrounding the dikes35,38. Dike-parallel fractures, however, can also form during emplacement due to the tensile stresses that develop around pressurized crack tips42.
The northwest-trending tectonic fabric defined by the IDS is particularly strong within the Argus Range and Spangler Hills adjacent to the Ridgecrest ruptures (Fig. 2). Paleomagnetic data and comparison to dike orientations in the Sierra Nevada indicate that dikes within this region have not experienced significant vertical axis block rotation since emplacement43. Local trend variations within the block may have developed due to the intrusion of younger plutons or to shear displacement resolved along the dikes24, evidenced by the mylonitic fabrics along their boundaries39. Intruding Jurassic granitoids, the dikes range in composition from mafic to felsic35,39,44, with many of the mafic dikes hydrothermally altered to produce chlorite and epidote under greenschist facies conditions34,44. Amphibole geobarometry and microstructural analyses indicate that the structural level of the IDS currently exposed in the Spangler Hills (Fig. 2) was emplaced at 4–8 km depth and subsequently exhumed through uplift and erosion39. The modern depth extent of the dikes is speculated to be ~5 km, though there is significant uncertainty in this estimate given the unknown initial source depth39. Thus, faults hosting the Ridgecrest ruptures developed in a setting with pervasive pre-existing structures genetically linked to the IDS within the shallowest ~5 km of Earth’s crust.
a Field measurements28 indicate elevated right-lateral horizontal offset within a 12-km-long maximum slip zone (MSZ) along the M7.1 rupture. The slip distribution does not correlate with changes in basin thickness63, geomorphic features (i.e., Pleistocene lakes)37, or geologic units59 (gr—Mesozoic granitic rocks, Ql—quaternary lacustrine deposits, Qal—quaternary alluvium; see Supplementary Table 1 for full list); b Variations in rupture trend roughly follow the surrounding Independence dike swarm (IDS). The trend is averaged over 1 km increments of the rupture and 1 km2 grid cells for the dikes. The base map is a digital surface model derived from pre-event optical imagery100.
During the 2019 Ridgecrest earthquake sequence (Fig. 2a)28, a M6.4 foreshock produced left-lateral surface rupture across the northeast-trending Salt Wells Valley Fault Zone28. At depth, the foreshock also activated a segment of the right-lateral northwest-trending Paxton Ranch Fault Zone, producing an L-shaped rupture45,46. Approximately, 34 h later, the M7.1 mainshock further ruptured the Paxton Ranch Fault Zone with most surface offset focused onto one principal fault strand and relatively minor offset (<~30% cumulative offset) on slightly oblique subsidiary strands spanning a ~2.5 km-wide-zone in the central portion of the rupture28. The surface rupture terminates in structurally complex regions, marked by orthogonal left-lateral and normal faults in the northwest and horsetail-like splay faults in the southeast47. Neglecting the structurally complex rupture termination zones and where vertical offset measurements were not recorded, the median ratio of vertical-to-horizontal offset is 0.1528. Because it dominates the slip vector, we focus on the horizontal component of offset and refer to it as slip.
Field measurements reveal elevated right-lateral slip, generally 3–4 m, within a discrete ~12-km-long section of the M7.1 rupture in the epicentral region28 (Fig. 2a). This maximum slip zone (MSZ) is bound to the northwest and southeast by steep slip gradients (>1 m/km), where slip abruptly decreases to an average of 0.2 m and 0.7 m, respectively28. Distributions of fault-parallel displacement derived from optical imagery broadly conform to the field-based slip distribution but indicate greater localization within the MSZ and distributed (i.e., off-fault, diffuse) deformation in the sections bounding the MSZ48,49,50,51. Additionally, many seismically- and geodetically-constrained coseismic slip models52 and dynamic rupture simulations53,54 show elevated slip in the epicentral region from Earth’s surface down to at least several kilometers depth.
Here we combine field and remote sensing observations to show that the 2019 M7.1 Ridgecrest source faults likely evolved through the reactivation of pre-existing IDS structures. We use mechanical modeling to find that the inherited fault geometry strongly controlled the resulting earthquake slip distribution. Additionally, we discuss how the pre-existing dikes may have influenced the development of other fault zone properties, including the frictional strength and orthogonal fault patterns. Based on these findings, we hypothesize that the Walker Lane and ECSZ tectonic provinces may have preferentially formed along a zone of crustal weakness created by the IDS.
Results
Reactivation of Independence dike swarm structures
We made field observations to characterize the IDS structures and to investigate whether they participated in the M7.1 Ridgecrest rupture. Dikes exposed ~3 km away from the rupture are accompanied by pervasive fracturing of the host granitoid, including at least two fracture sets that are approximately parallel and orthogonal to the dikes (Fig. 3, Supplementary Fig 1). Some exposed fracture surfaces have a light green appearance, suggestive of the hydrothermal minerals (e.g., chlorite and epidote) observed along the altered dikes44. Additionally, we observe increased fracture density adjacent to the dike-host contact at several outcrops (Fig. 3b, Supplementary Fig 1), consistent with fracture formation during dike emplacement42. Dike-orthogonal fractures also have been linked to the emplacement process55 or may be related to a stress transition that occurs when fracture spacing reaches a threshold value56. Thus, like elsewhere in the IDS35, the granitic bedrock hosting the Ridgecrest ruptures contains a strong structural fabric defined by the dikes and their associated fracture sets.
a Southeast view of outcrop showing an apparent dike thickness of ~3.5 m and multiple fracture sets in the granitic host, including dike-parallel (white) and -orthogonal (magenta) sets. b Dense dike-parallel fractures adjacent to dike-host contact dip steeply toward the northeast. c Example of exposed fracture surface with light green coloration and orientation similar to that of the dike-host contact. Location: 35.659448°, −117.434252° (see Fig. 2).
Because parent and descendant structures typically share common geometries22, we test whether the dikes and M7.1 rupture show similar variations in their orientations. Dikes are identifiable in satellite imagery57 and airborne lidar-derived digital elevation models58 as predominantly dark, narrow curvilinear ridges. From this imagery, we made >5,000 trend measurements for dikes located within ~15 km of the M7.1 rupture trace and calculated the mean dike trend within 1 km2 grid cells (Fig. 2b). Most dikes trend ~310° in the southeast, progressively rotate clockwise toward the northwest reaching trends of ~330°, and then rotate back counterclockwise to trends of ~310° in the northwest section of the study area. Spatial variations of the M7.1 rupture orientation, averaged over 1-km-long segments, roughly follow those of the surrounding dike swarm (Fig. 2b). An apparent discrepancy between the rupture and dike orientations in the central portion of the rupture (near 450 km Easting, 3950 km Northing in Fig. 2b) may reflect the fact that within grid cells, dikes are not homogeneously oriented, and the fault system may have reactivated structures not aligned with the mean orientation. Additionally, although the bedrock is mapped everywhere as undifferentiated Mesozoic granitic rock59, this section of the rupture is bound to the northeast by an elongate northwest-trending body lighter in color compared to elsewhere (Supplementary Fig 2). Thus, strength contrasts between neighboring plutons also may have localized deformation and influenced fault geometry within this region.
Variations in the inferred rupture and dike dips suggest a common geometry in three dimensions. Relocated seismicity catalogs45,60 indicate that although a complex array of cross-faults persists throughout the seismogenic layer, the primary rupture appears to simplify to a nearly planar geometry at depths greater than ~6 km. At shallower depths, the inferred rupture dip varies along strike, from moderately northeast in the southern (70–75°) and central (55–70°) portions of the rupture to steeply southwest (85°) in the northern portion of the rupture61,62. We use structure contour analysis to estimate nearly identical dike dips within these regions: 71° NE, 53° NE, and 84° SW, respectively (Supplementary Fig 3).
Field observations provide additional evidence for shear reactivation of IDS structures. Previous studies documented incipient sinistral mylonitic fabrics along dike boundaries in the Spangler Hills that likely developed under midcrustal conditions shortly following intrusion39. We observe evidence (e.g., slickenlines; Supplementary Fig 4) for midcrustal reactivation of mineralized fractures, as well. Specific to the 2019 M7.1 earthquake, we identified multiple sites where the rupture aligns closely with individual dike segments (Fig. 4, Supplementary Fig 5). In Fig. 4, we interpret dike segments where dark tonal contrasts coincide with topographic lineaments. In outcrop, we observe that these rocks contain abundant northwest-trending anastomosing shear fractures (Fig. 4c) and evidence for increasing comminution approaching M7.1 rupture (Fig. 4d).
a Orthophoto58 showing tonal lineaments subparallel to rupture, bracketed by yellow and red triangles, respectively. b Digital elevation model58 showing narrow ridges that correspond to the tonal lineaments in (a), along with the clearly expressed rupture. c Subvertical outcrop exposure of one of the interpreted dikes, with pervasive anastomosing shear fractures. d Oblique southeast view of the interpreted dike located closest to the surface rupture, again with pervasive fracturing that transitions to an apparently pulverized texture with increasing proximity to the rupture. Hammer for scale. Location: 35.696488°, −117.547989° (see Fig. 2).
Mechanical heterogeneities along the rupture
We consider whether the slip distribution reflects changes in lithologic units mapped at Earth’s surface or basin thickness inferred from gravity data63, finding that the slip distribution is largely independent of these factors (Fig. 2a). Both within and outside the MSZ, the rupture intersects granitic bedrock, alluvium, and lacustrine deposits. Basin thickness increases along the western edge of the MSZ, from 0 km (bedrock outcrops) in the southeast to 2 km in the northwest63. We, therefore, conclude that the concentration of slip in the MSZ is not controlled by along-strike variations in near-surface lithology or basin thickness.
Instead, the slip distribution correlates closely with changes in the surface rupture orientation (Fig. 2). Within the MSZ, the principal rupture trend is rotated ~20° clockwise compared to the rupture trend outside the MSZ. This suggests that fault geometry relative to the background stress field played an important role in controlling the slip distribution. To explain this, we calculate fault tractions using the background stress field constrained by focal mechanism inversions64 and the rupture geometry. Along the rupture, the orientation of the maximum horizontal compressive stress, SHmax, varies subtly from 004° to 011° with an average of 006°. We estimate the magnitudes of SHmax and Shmin at 2 km depth to be 128 MPa and 36 MPa, respectively, based on borehole constraints from the Coso geothermal field65, located ~25 km northwest of the MSZ. Previous studies constrained the stress fields within the Coso and Ridgecrest regions to be similarly oriented64,66, and the stress gradients are comparable with previous modeling studies of Ridgecrest54 and Landers67. We choose a depth of 2 km because the focal mechanism inversion study64 is poorly constrained at shallower depths. Under these loading conditions, fault tractions are sensitive to the observed variations in fault strike, but largely unaffected by inferred variations in fault dip (Supplementary Fig 6). This supports the use of a 2D model to evaluate how changes in fault strike affect the resulting slip distribution.
We use Cauchy’s formula68 to compute normal and shear tractions in 1 km increments along the principal rupture (Methods, Supplementary Fig 7), first assuming a uniform background stress field with the average SHmax orientation. The prestress ratio, f0, is calculated as the ratio of shear to normal tractions along the fault69, with greater values indicating a stress state more favorable for fault slip. We find that the prestress ratio is greatest within the MSZ (Fig. 5a), providing a straightforward mechanical explanation for elevated slip there. We also consider changes in tractions along the M7.1 rupture due to the nonuniform background stress field, in which the orientation of SHmax varies spatially (Fig. 5b), and due to the M6.4 foreshock (Fig. 5c). Changes in the prestress ratio due to these factors are generally on the order of ±0.05 and ±0.02, respectively, significantly less than along-strike variations due to fault geometry alone (0.03 − 0.68; Fig. 5a).
a Uniform background stress field assuming the average near-field SHmax64. Maximum f0 = 0.68; Minimum f0 = 0.03. RB1 and RB2 denote the locations of two releasing bends. b Changes in the prestress ratio relative to (a) due to the nonuniform background stress field. Colorbar is saturated. Maximum Δf0 = 0.17; Minimum Δf0 = −0.04. c Changes in the prestress ratio due to the M6.4 foreshock (source geometry46 shown in black). Colorbar is saturated. Maximum Δf0 = 0.11; Minimum Δf0 = −0.08.
Slip sensitivity to fault geometry and background stress field
We construct finite-element models in PyLith v2.2.270 to evaluate the sensitivity of the slip distribution to variations in the background stress field and geometry of the primary fault strand. The quasi-static, plane strain models include a fault embedded in a homogeneous, isotropic, linear elastic material with properties taken from lab tests of Coso granodiorite71. Fault slip is governed by the Coulomb criterion, and we test three fault geometries to represent the M7.1 Ridgecrest rupture: planar, coarse nonplanar (5-km geometry resolution), and fine nonplanar (500-m geometry resolution). All models use a 100-m element size along the fault. Full details are given in the Methods section, Supplementary Figs. 8 and 9, Supplementary Note 2, and Supplementary Table 2.
With a uniform background stress field (Fig. 5a), the planar fault produces the expected elliptical slip distribution and poorly matches the field and geodetic data (Fig. 6). By accounting for geometric changes at the 5-km scale, the model with the coarse nonplanar fault captures the general shape of the field data, with maximum slip occurring just south of the epicenter. Modeled slip is reduced by ~80% in the southern half of the rupture. Models including the fine nonplanar fault provide additional detail in the slip distribution. For instance, within the MSZ, the model produces two local slip minima, in agreement with the geodetic data and the moving average of the field data28. These minima correspond to kilometer-scale bends in the surface rupture, where its trend rotates clockwise, nearing alignment with SHmax, and resolved shear tractions are greatly reduced (Supplementary Fig 7, 10). Implementing a nonuniform background stress field results in a slight increase and decrease in slip in the southeast and northwest portions of the rupture, respectively. Incorporating the M6.4 foreshock stress changes has the greatest effect where the foreshock and mainshock ruptures intersect, but a minimal effect elsewhere. Thus, although some72 have suggested that the foreshock stress changes may have triggered the mainshock, our models indicate that the resulting slip distribution was largely unaffected.
Error bars denote field uncertainty and 1σ uncertainty, respectively. Model fault geometries are given on the right, and background stress fields are shown in Fig. 5. Models with the planar and coarse nonplanar fault geometry use a coefficient of friction, μ = 0.475. Models with fine nonplanar fault geometry use μ = 0.425. Releasing bend (RB1 and RB2) locations are shown in Fig. 5a.
Discussion
Our analysis indicates that during the M7.1 Ridgecrest earthquake, along-strike changes in rupture trend within the existing background stress field strongly controlled the slip distribution at Earth’s surface. Whereas others28 have speculated that the high slip gradients bounding the MSZ resulted from cross-fault dynamics, we show that these gradients can be reproduced by a simple quasi-static model that includes the observed surface rupture geometry (Fig. 6). We find that lithologic variations did not significantly affect the slip distribution, possibly because the alluvial and lacustrine deposits are relatively thin (<500 m) over much of the rupture (Fig. 2a). Furthermore, contrary to previous work showing reduced fault slip in structurally complex regions13, the MSZ occurs in the only portion of the surface rupture with significant slip (>50 cm) on subparallel secondary strands. Thus, additional work is needed to constrain under what conditions surface slip becomes sensitive to lithology and structural complexity.
Although the observed slip distribution likely resulted from fault traction variations governed by the near-surface geometry, the rupture appears to simplify to an approximately planar structure at depths exceeding ~3–4 km62 or 6 km45,60,61. We therefore expect slip to be more symmetrically distributed at these depths in the absence of other heterogeneities1, which future studies may test through comparison with finite fault models. We speculate that the change in rupture geometry at depth may reflect the modern vertical extent of the IDS dikes, which have experienced 4–8 km of exhumation and erosion since emplacement39. This notion is supported by the fact that rupture dip variations in the shallow crust, which currently lack an explanation, closely match those inferred for the dikes (Supplementary Fig 3). Seismologic and geodetic inversions from previous earthquakes indicate that deep and surface slip distributions do not always strictly correlate with one another73. Our analysis suggests that surface slip may be controlled by the geometry of shallow structures and should be considered with caution when extrapolated to study fault processes at seismogenic depths.
Our model results are consistent with the findings of near-field geodetic studies that estimate an average of 30–35% distributed deformation, with the greatest values occurring outside of the MSZ49,50,51. Processes leading to this distributed deformation and an associated reduction in fault slip likely were confined to the shallowest ~2 km of Earth’s crust50. Our analysis considers the fault slip distribution expected to develop under the stress state found immediately below this region at 2 km depth. The fine nonplanar model produces a slip distribution that closely matches the field data within the MSZ but overestimates the field data elsewhere (with the exception of at ~−20 km from the epicenter where there are overlapping rupture strands not included in the model; Fig. 6). This result is consistent with the hypothesis that all slip reached the surface from 2 km depth within the MSZ, whereas other portions of the rupture experienced a reduction in shallow slip associated with distributed deformation.
Our results (Fig. 6) suggest that knowledge of fault geometry and the background stress field may aid in forecasting the general shape of a slip distribution during a surface-rupturing event. Previous studies found that cumulative slip distributions (i.e., summed slip over many earthquake cycles) share general characteristics with those that develop during individual earthquakes, suggesting that although the details of individual ruptures may differ, slip on average tends to concentrate in some regions over others4. This concentration may be controlled by the presence of geometric or structural barriers, and the resulting stress perturbations along the fault may be relieved by distributed permanent deformation4 and/or aseismic fault slip. Examples of repeated slip distributions include (1) the pair of Parkfield, California, earthquakes in 1966 and 2004, which produced similar slip distributions along both the San Andreas Fault and Southwest Fracture Zone, despite a distance of 25 km between epicenters74, and (2) the pair of Imperial Valley, California, earthquakes in 1940 and 1979 that produced similar slip distributions along the northern third of the Imperial Fault75,76. The Ridgecrest mainshock is bound by two significant structural barriers: the Coso geothermal field to the north and the Garlock fault to the south. Observations of distributed deformation49,50,51 and afterslip77,78 in regions complementing the coseismic slip distribution are further indications that a Ridgecrest-type event could recur.
In addition to the slip distribution, we find that fault geometry may have controlled the dynamic rupture characteristics of the earthquake. Geophysical and geodetic data can be explained by models including multiple distinct ruptures with delayed initiation times53, or alternatively by a rupture that transitions from crack-like within the MSZ to pulse-like elsewhere72. This transition may reflect saturation of the seismogenic layer as the rupture reached lengths greater than ~15 km79. Additionally, theoretical models80 and laboratory experiments69 indicate that this transition is consistent with an elevated prestress ratio along the MSZ, in agreement with our calculations (Fig. 5). Previous work72 invoked Coulomb stress changes from the M6.4 foreshock to explain the transition in rupture mode, yet the variations in the prestress ratio along the nonplanar rupture with the uniform background stress field (Fig. 5a) far exceed those associated with the M6.4 stress changes (Fig. 5c). We, therefore, expect that the same rupture modes could have emerged even in the absence of the foreshock.
The geometry of the M7.1 surface rupture appears to be inherited from structures associated with the IDS, based on their common spatial variations in orientation (Figs. 2a and 7; Supplementary Fig 3) and shear fabrics observed in interpreted dike segments aligned with the M7.1 surface rupture (Fig. 4). Previous studies have suggested that dike swarms may control the geometry of younger rift-related faults23 and potentially influence the locations and orientations of intraplate earthquake ruptures81. Near Ridgecrest, abundant dikes, dike-parallel fractures, and associated hydrothermal alteration minerals (e.g., chlorite, epidote) constitute a fabric of frictionally weak surfaces that predated the development of the Paxton Ranch Fault Zone. Shear reactivation of pre-existing fractures is commonly observed in exhumed granitic plutons82,83, including in the Sierra Nevada, where overprinting textures of quartz mylonite, epidote-chlorite cataclasite, and pseudotachylyte indicate an evolution from opening-mode fracturing to ductile shearing, and then to seismogenic faulting during exhumation and cooling22,84. A similar progression may be responsible for the development of the Paxton Ranch Fault Zone, and, ultimately for the 2019 M7.1 Ridgecrest earthquake slip distribution (Fig. 7).
a Dike emplacement at 148 Ma may have exploited a regional joint set35 and/or produced a set of dike-parallel fractures42 (Fig. 3). b Soon after emplacement, the dikes were reactivated as left-lateral mylonitic shear zones under mid-crustal conditions39. Mineralized fractures also accommodated mid-crustal shear deformation (Supplementary Fig. 4). This shearing and/or intrusion of neighboring plutons may have caused the observed variations in dike orientation (Fig. 2)24. c Following exhumation, we suggest that the dikes and fractures were again reactivated in right-lateral shear as the Paxton Ranch Fault Zone developed and eventually hosted the 2019 M7.1 Ridgecrest earthquake (Fig. 4). The inherited geometry led to spatially varying shear (Ts) and normal (Tn) tractions along the fault (Fig. 5) that controlled the slip distribution (Fig. 6). σsmax and σnmean represent the maximum shear stress and mean normal stress, respectively.
Beyond geometry, the IDS may have influenced the development of other fault zone properties. For instance, the presence of frictionally weak (coefficient of friction, μ ~0.4–0.585,86) alteration minerals within the dikes and fractures may explain why our mechanical models (Fig. 6) require μ = 0.425-0.475 to fit the data (Supplementary Fig 11), lower than the expected range of values for crustal rocks (0.6 < μ < 0.8587). Previous work using Mohr–Coulomb–Anderson theory found that the dihedral angle between sets of apparently conjugate faults at Ridgecrest indicates μ ∼0.4–0.666 or, accounting for finite strain and rotation since the initiation of the ECSZ, μ ∼0.688. These analyses implicitly assume an initially homogeneous crust and neglect the potential impact of mechanical anisotropy imparted by the IDS prior to fault initiation. Importantly, when SHmax is oblique (~25–75°) to anisotropy, fault development does not follow standard Mohr–Coulomb–Anderson theory. Rather, slip preferentially occurs along the pre-existing planes, leading to asymmetric fault development about SHmax, reduced crustal strength, and up to 90° dihedral angles89. Thus, investigations into the origin of orthogonal faulting at Ridgecrest, where SHmax is oriented ~25–55° to the IDS fabric, would benefit from considering the possible contribution of crustal anisotropy. Additionally, mechanical anisotropy affects the distribution and mechanisms of deformation around faults90 and thus may be an important consideration in studies of damage zone processes.
Recognizing its potential impact on the development of the Ridgecrest source faults raises the question of whether the IDS influenced other fault systems within its footprint (Fig. 1). Previous studies noted that most of the surface ruptures for the 1992 M7.3 Landers and 1999 M7.1 Hector Mine earthquakes occurred along known faults within the tectonic fabric of the ECSZ91,92. Upon inspection of satellite imagery57, we identify numerous dark northwest-trending lineaments, suggestive of IDS dikes, aligned with sections of the Landers and Hector Mine surface ruptures32 (Supplementary Fig 12). These observations motivate revisiting the interpretation of these events through the lens of the IDS. Furthermore, the colocation of the IDS with the ECSZ and southern Walker Lane (Fig. 1) raises the larger question of whether those shear zones preferentially developed in an anisotropic zone of crustal weakness created by the IDS along the ancestral magmatic arc. If so, then labeling of these fault systems as immature31,45 contradicts that they include structures with 148 Ma of geologic history. These structures evolved through multiple pulses of deformation along subduction and transform plate boundary settings93, fluid circulation, and mineral alteration34,44, all while being exhumed several kilometers through Earth’s crust39. This rich geologic history is the foundation for active faulting in eastern California and may help resolve topics (e.g., orthogonal faulting45,88, initiation of the ECSZ94, and Walker Lane95) that have long intrigued the earthquake science community.
Methods
Analysis of rupture data
We analyzed previously published field data28 to evaluate the relation between slip and rupture orientation (Fig. 2). In this analysis, we included mapped ruptures with >2 measurements of fault offset and at least one measurement exceeding 50 cm horizontal offset (~10% of the maximum offset). These criteria left us with the primary rupture and three subsidiary strands shown in Fig. 2b. To calculate trend, we performed least-squares regression in MATLAB96 of the published28 measurement locations in 1 km increments along each rupture strand.
Dike identification and analysis
A total of >5000 dike segments were mapped at the ~1:7500 scale using Google Earth57 satellite imagery in QGIS97 with the WGS 84 / UTM Zone 11 N coordinate reference system. The mapping effort focused on dikes located within ~15 km of the M7.1 rupture, with most dikes located northeast of the rupture. Each dike was mapped as a single line or as a series of linear segments, depending on whether the dike was approximately linear, curvilinear, or segmented. Because the purpose of the mapping was to determine the variation in dike azimuth, the map does not provide information about the dimensions (e.g., length and aperture) or dip of the dikes. We determined the trend and centroid coordinates for each dike segment using the field calculator in QGIS97 and calculated the mean dike trend in 1 km2 grid cells in MATLAB96. We report only the grid cells that contained more than five dike centroids.
Background stress field orientations and magnitudes
Orientations of the background stress field were taken from Hardebeck64, who determined the stress field using focal mechanism inversions for southern California earthquakes from 1981 up to the time of the M6.4 foreshock. The Hardebeck (2020) model provides the orientation of the 3D stress tensor on a grid with 2 km spacing in the region immediately surrounding the M7.1 Ridgecrest rupture. We determine the orientations of the principal stresses by calculating the eigenvalues and eigenvectors of the in-plane stresses, Sin-plane = [See Sen; Sne Snn], where the n and e subscripts refer to north and east, respectively. The minimum (most compressive) principal stress orientation is the orientation of SHmax, the maximum horizontal compressive stress. The maximum (least compressive) principal stress orientation is the orientation of Shmin, the minimum horizontal compressive stress. We estimate the magnitudes of the principal stresses using borehole constraints from the Coso geothermal field65. Based on estimated SHmax and Shmin vertical gradients of 64 MPa/km and 18 MPa/km, respectively, we calculate SHmax and Shmin to be 128 MPa and 36 MPa, respectively, at 2 km depth. We calculate the static stress change due to the M6.4 foreshock along the model faults (Fig. 5c) using the Liu et al.46 L-shaped finite source model64.
Traction calculations
We computed normal tractions, Tn, and shear tractions, Ts, on the fault using Cauchy’s formula68:
where σ1 and σ2 are the maximum and minimum in-plane principal stresses, respectively, and β is the angle between σ1 and the unit normal of the fault surface. We calculated tractions with a uniform horizontal spacing of 100 m. The fault orientation was calculated to be the average within ±100 m, and the orientation of the maximum principal stress was taken from the closest location in the Hardebeck64 model. For the model with a uniform background stress field, the maximum principal stress orientation used was the average of those used in the nonuniform model.
Finite-element model
We used PyLith v2.2.270 to carry out the finite-element analysis. The 2D model domain is 500 km × 500 km and contains a fault embedded at its center (Supplementary Fig 8). Three fault geometries are used to represent the M7.1 Ridgecrest rupture in the finite-element models. We created the two nonplanar fault geometries by tracing the primary rupture in Google Earth Pro57, capturing trend variations at approximately the 5-km and 500-m scale. These traces define the coarse nonplanar and fine nonplanar fault geometries, respectively. The planar fault geometry assumes the total cumulative length of the fine nonplanar geometry (38.5 km) with an orientation (318°) determined from the least-squares regression of the primary rupture28.
We used CUBIT 15.598 to generate the mesh for each of these geometries (Supplementary Fig 9). The mesh includes spatially varying element sizes, with 100-m node spacing along the fault that gradually increases away from the fault with a bias factor of 1.05 to ~20-km spacing at the model boundaries. The planar, coarse nonplanar, and fine nonplanar fault models include 56,062 elements, 55,926 elements, and 55,454 elements, respectively. We verified the mesh quality using the condition number metric98, which for each mesh averaged 1.01 and had a maximum of 1.3. We confirmed convergence by repeating model runs with 200-m, 100-m, and 50-m node spacing along the fault (Supplementary Fig 13).
The model domain is defined as a homogeneous, isotropic linear elastic medium with parameters determined by laboratory testing of Coso granodiorite71: density = 2658 kg/m3, Young’s modulus = 74.1 GPa, Poisson’s ratio = 0.277. Spontaneous fault slip is governed by the Coulomb criterion68 with no cohesion and the coefficient of friction, μ = 0.425 or 0.475. Model results are sensitive to the choice of friction, and these values were chosen to best fit the field data (Supplementary Fig 11).
Fault slip is driven by prescribed fault traction perturbations (Fig. 5) with model boundaries fixed in both the x- and y-directions. Supplementary Table 2 summarizes the solver settings. Because we use an iterative solver, we specify a minimum tolerance for slip (values below the tolerance are set to zero). We benchmarked this model set-up against an analytical solution for slip along a planar fault resulting from uniform driving stress8, finding a close match between the results (Supplementary Note 3, Supplementary Fig 13).
Data availability
Field data28 documenting the rupture geometry and slip distribution are available at https://doi.org/10.5066/P986ILE2. The displacement profile derived from optical imagery51 in Fig. 6 is available at https://doi.org/10.5281/zenodo.3937853. Dike interpretations in Figs. 2 and 4 were based on Google Earth57 satellite imagery linked to QGIS97, along with orthoimagery and lidar58, available at https://hddsexplorer.usgs.gov and https://opentopography.org, respectively. Background stress field orientations and M6.4 static stress changes are from Hardebeck (2020)64.
Code availability
MATLAB scripts and PyLith input files central to our analysis are available at https://doi.org/10.5281/zenodo.7121268. MATLAB96 is a proprietary computing software package developed by MathWorks and available at https://www.mathworks.com/products/matlab.html. PyLith v2.2.270 is an open-source finite-element code published under the MIT license and made available through the Computational Infrastructure for Geodynamics at https://geodynamics.org/resources/pylith.
References
Bürgmann, R., Pollard, D. D. & Martel, S. J. Slip distributions on faults: effects of stress gradients, inelastic deformation, heterogeneous host-rock stiffness, and fault interaction. J. Struct. Geol. 16, 1675–1690 (1994).
Nevitt, J. M. & Pollard, D. D. Impacts of off-fault plasticity on fault slip and interaction at the base of the seismogenic zone. Geophys. Res. Lett. 44, 1714–1723 https://doi.org/10.1002/2016gl071688 (2017).
Scholz, C., Dawers, N. H., Yu, J.-Z. & Anders, M. H. Fault growth and fault scaling laws: preliminary results. J. Geophys. Res. 98, 21951–21961 https://doi.org/10.1029/93JB01008 (1993).
Manighetti, I., Campillo, M., Sammis, C., Mai, P. M. & King, G. Evidence for self-similar, triangular slip distributions on earthquakes: Implications for earthquakes and fault mechanics. J. Geophys. Res. 110, 1–25 https://doi.org/10.1029/2004JB003174 (2005).
Perrin, C., Manighetti, I., Ampuero, J.-P., Cappa, F. & Gaudemer, Y. Location of largest earthquake slip and fast rupture controlled by along-strike change in fault structural maturity due to fault growth. J. Geophys. Res. 121, 3666–3685 https://doi.org/10.1002/2015JB012671 (2016).
Honegger, D. G., Nyman, D. J., Johnson, E. R., Cluff, L. S. & Sorensen, S. P. Trans-Alaska pipeline system performance in the 2002 Denali fault, Alaska, earthquake. Earthq. Spectra 20, 707–738 (2004).
Thompson, E. M. & Baltay, A. S. The case for mean rupture distance in ground-motion estimation. Bull. Seismol. Soc. Am. 108, 2462–2477 https://doi.org/10.1785/0120170306 (2018).
Pollard, D. D. & Segall, P. Theoretical displacements and stresses near fractures in rock: with applications to faults, joints, veins, dikes and solution surfaces. in Fracture Mechanics of Rock (ed B. K. Atkinson) 277–349 (American Press Inc., 1987).
Rockwell, T. K. & Klinger, Y. Surface rupture and slip distribution of the 1940 Imperial Valley Earthquake, Imperial Fault, Southern California: implications for rupture segmentation and dynamics. Bull. Seismol. Soc. Am. 103, 629–640 https://doi.org/10.1785/0120120192 (2013).
Nevitt, J. M. et al. Mechanics of near-field deformation during co- and post-seismic shallow fault slip. Sci. Rep. 10, 5031 https://doi.org/10.1038/s41598-020-61400-9 (2020).
Kaneko, Y. & Fialko, Y. Shallow slip deficit due to large strike-slip earthquakes in dynamic rupture simulations with elasto-plastic off-fault response. Geophys. J. Int. 186, 1389–1403 (2011).
Roten, D., Olsen, K. & Day, S. Off‐fault deformations and shallow slip deficit from dynamic rupture simulations with fault zone plasticity. Geophys. Res. Lett. 44, 7733–7742 https://doi.org/10.1002/2017GL074323 (2017).
Milliner, C. W. D. et al. Resolving fine-scale heterogeneity of co-seismic slip and the relation to fault structure. Sci. Rep. 6, 27201 https://doi.org/10.1038/srep27201 (2016).
Zinke, R., Hollingsworth, J. & Dolan, J. F. Surface slip and off‐fault deformation patterns in the 2013 Mw 7.7 Balochistan, Pakistan earthquake: Implications for controls on the distribution of near‐surface coseismic slip. Geochem. Geophys. Geosyst. 15, 5034–5050 https://doi.org/10.1002/2014GC005538 (2014).
Ritz, E., Pollard, D. D. & Ferris, M. The influence of fault geometry on small strike-slip fault mechanics. J. Struct. Geol. 73, 49–63 https://doi.org/10.1016/j.jsg.2014.12.007 (2015).
Dieterich, J. H. & Smith, D. E. Nonplanar faults: Mechanics of slip and off-fault damage. in Mechanics, Structure and Evolution of Fault Zones Pageoph Topical Volumes (eds Y. Ben-Zion & C. Sammis) 1799–1815 (Birkhäuser Basel, 2009).
Kame, N., Rice, J. R. & Dmowska, R. Effects of prestress state and rupture velocity on dynamic fault branching. J. Geophys. Res. 108 https://doi.org/10.1029/2002JB002189 (2003).
Anderson, G., Aagaard, B. & Hudnut, K. Fault interactions and large complex earthquakes in the Los Angeles area. Science 302, 1946–1949 https://doi.org/10.1126/science.1090747 (2003).
Bouchon, M., Campillo, M. & Cotton, F. Stress field associated with the rupture of the 1992 Landers, California, earthquake and its implications concerning the fault strength at the onset of the earthquake. J. Geophys. Res. 103, 091–021,097 (1998).
Harris, R. A., Dolan, J. F., Hartleb, R. & Day, S. M. The 1999 Izmit, Turkey, earthquake: a 3D dynamic stress transfer model of intraearthquake triggering. Bull. Seismol. Soc. Am. 92, 245–255 (2002).
Crider, J. G. & Peacock, D. C. P. Initiation of brittle faults in the upper crust: a review of field observations. J. Struct. Geol. 26, 691–707 https://doi.org/10.1016/j.jsg.2003.07.007 (2002).
Segall, P. & Pollard, D. D. Nucleation and growth of strike slip faults in granite. J. Geophys. Res. 88, 555–568 (1983).
Phillips, T. B., Magee, C., Jackson, C. A.-L. & Bell, R. E. Determining the three-dimensional geometry of a dike swarm and its impact on later rift geometry using seismic reflection data. Geology 46, 119–122 https://doi.org/10.1130/G39672.1 (2018).
Martel, S. J. Mechanical controls on fault geometry. J. Struct. Geol. 21, 585–596 (1999).
Martel, S. J., Pollard, D. D. & Segall, P. Development of simple strike-slip fault zones, Mount Abbot Quadrangle, Sierra Nevada, California. Geol. Soc. Am. Bull. 100, 1451–1465 (1988).
Vallage, A., Klinger, Y., Lacassin, R., Delorme, A. & Pierrot‐Deseilligny, M. Geological structures control on earthquake ruptures: The Mw 7.7, 2013, Balochistan earthquake, Pakistan. Geophys. Res. Lett. 43, 155–163 https://doi.org/10.1002/2016GL070418 (2016).
Choi, J.-H. et al. Geologic inheritance and the earthquake process: the 1905 M ≥ 8 Tsetserleg-Bulnay strike-slip earthquake sequence, Mongolia. J. Geophys. Res. 123, 1925–1953 https://doi.org/10.1002/2017JB013962 (2018).
DuRoss, C. B. et al. Surface displacement distributions for the July 2019 Ridgecrest, California, earthquake ruptures. Bull. Seismol. Soc. Am. https://doi.org/10.1785/0120200058 (2020).
Dokka, R. K. & Travis, C. J. Role of the Eastern California Shear Zone in accommodating Pacific-North American Plate motion. Geophys. Res. Lett. 17, 1323–1326 https://doi.org/10.1029/GL017i009p01323 (1990).
Wesnousky, S. G. Active faulting in the Walker Lane. Tectonics 24, 1–35 https://doi.org/10.1029/2004TC001645 (2005).
Dolan, J. F. & Haravitch, B. D. How well do surface slip measurements track slip at depth in large strike-slip earthquakes? The importance of fault structural maturity in controlling on-fault slip versus off-fault surface deformation. Earth Planet. Sci. Lett. 388, 38–47 (2014).
USGS and CGS. Quaternary Fault and Fold Database of the United States. https://www.usgs.gov/natural-hazards/earthquake-hazards/faults (2022).
Carl, B. S. & Glazner, A. F. Extent and significance of the Independence dike swarm, Eastern California. Geol. Soc. Am. Mem. 195, 117–130 (2002).
Moore, J. G. & Hopson, C. A. The Independence dike swarm of Eastern California. Am. J. Sci. 259, 241–259 https://doi.org/10.2475/ajs.259.4.241 (1961).
Chen, J. H. & Moore, J. G. Late Jurassic Independence dike swarm in Eastern California. Geology 7, 129–133 https://doi.org/10.1130/0091-7613(1979)7<129:LJIDSI>2.0.CO;2 (1979).
James, E. W. Southern extension of the Independence dike swarm of Eastern California. Geology 17, 587–590 https://doi.org/10.1130/0091-7613(1989)017<0587:SEOTID>2.3.CO;2 (1989).
Thompson Jobe, J. A. et al. Evidence of Previous Faulting along the 2019 Ridgecrest, California, Earthquake ruptures. Bull. Seismol. Soc. Am. 110, 1427–1456 https://doi.org/10.1785/0120200041 (2020).
Glazner, A. F., Bartley, J. M. & Carl, B. S. Oblique opening and noncoaxial emplacement of the Jurassic Independence dike swarm, California. J. Struct. Geol. 21, 1275–1283 https://doi.org/10.1016/S0191-5128141(99)00090-5 (1999).
Glazner, A. F., Carl, B. S., Coleman, D. S., Miller, J. S. & Bartley, J. M. Chemical variability and the composite nature of dikes from the Jurassic Independence dike swarm, eastern California. in Ophiolites, Arcs, and Batholiths: A Tribute to Cliff Hopson: Geological Society of America Special Paper 438 (eds J. E. Wright & J. W. Shervais) 455–480 (2008).
Vermilye, J. M. & Scholz, C. H. Relation between vein length and aperture. J. Struct. Geol. 17, 423–434 https://doi.org/10.1016/0191-8141(94)00058-8 (1995).
Klimczak, C., Schultz, R. A., Parashar, R. & Reeves, D. M. Cubic law with aperture-length correlation: implications for network scale fluid flow. Hydrogeol. J. 18, 851–862 https://doi.org/10.1007/s10040-009-0572-6 (2010).
Delaney, P. T., Pollard, D. D., Ziony, J. I. & McKee, E. H. Field relations between dikes and joints: emplacement processes and paleostress analysis. J. Geophys. Res. 91, 4920–4938 https://doi.org/10.1029/JB091iB05p04920 (1986).
Hopson, R. F., Hillhouse, J. W. & Howard, K. A. Dike orientations in the Late Jurassic Independence dike swarm and implications for vertical-axis tectonic rotations in eastern California. in Ophiolites, Arcs, and Batholiths: A Tribute to Cliff Hopson Vol. Special Paper 438 (eds J. E. Wright & J. W. Shervais) 481–498 (The Geological Society of America, 2008).
McManus, S. G. & Clemens-Knott, D. Geochemical and Oxygen Isotope Constraints on the Petrogenesis of the Independence dike swarm, San Bernadino Co., CA. In Geology of the Western Cordillera: Perspectives from Undergraduate Research Vol. 82 (eds Girty, G. H., Hanson, R. E. & Cooper, J. D.) 91–102 (Pacific Section S.E.P.M., 1997).
Ross, Z. E. et al. Hierarchical interlocked orthogonal faulting in the 2019 Ridgecrest earthquake sequence. Science 366, 346–351 https://doi.org/10.1126/science.aaz0109 (2019).
Liu, C., Lay, T., Brodsky, E. E., Dascher-Cousineau, K. & Xiong, X. Coseismic rupture process of the large 2019 ridgecrest earthquakes from joint inversion of geodetic and seismological observations. Geophys. Res. Lett. 46, 11820–11829 https://doi.org/10.1029/2019GL084949 (2019).
Ponti, D. J. et al. Documentation of surface fault rupture and ground‐deformation features produced by the 4 and 5 July 2019 Mw 6.4 and Mw 7.1 Ridgecrest Earthquake Sequence. Seismol. Res. Lett. 91, 2942–2959 https://doi.org/10.1785/0220190322 (2020).
Milliner, C. & Donnellan, A. Using Daily Observations from Planet Labs Satellite Imagery to Separate the Surface Deformation between the 4 July M w 6.4 Foreshock and 5 July M w 7.1 Mainshock during the 2019 Ridgecrest Earthquake Sequence. Seismol. Res. Lett. 91, 1986–1997 https://doi.org/10.1785/0220190271 (2020).
Gold, R. D., DuRoss, C. B. & Barnhart, W. D. Coseismic surface displacement in the 2019 Ridgecrest Earthquakes: comparison of field measurements and optical image correlation results. Geochem. Geophys. Geosyst. 22, 1–22 (2021).
Antoine, S. L. et al. Diffuse deformation and surface faulting distribution from submetric image correlation along the 2019 Ridgecrest, California, Ruptures. Bull. Seismol. Soc. Am. 111, 2275–2302 https://doi.org/10.1785/0120210036 (2021).
Milliner, C. et al. Bookshelf kinematics and the effect of dilatation on fault zone inelastic deformation: examples from optical image correlation measurements of the 2019 Ridgecrest Earthquake Sequence. J. Geophys. Res. 126, 1–20 https://doi.org/10.1029/2020JB020551 (2021).
Wang, K., Dreger, D. S., Tinti, E., Bürgmann, R. & Taira, T. Rupture Process of the 2019 Ridgecrest, California M w 6.4 Foreshock and M w 7.1 Earthquake Constrained by Seismic and Geodetic Data. Bull. Seismol. Soc. Am. 110, 1603–1626 https://doi.org/10.1785/0120200108 (2020).
Hirakawa, E. & Barbour, A. J. Kinematic rupture and 3D wave propagation simulations of the 2019 M w 7.1 Ridgecrest, California, earthquake. Bull. Seismol. Soc. Am. 110, 1644–1659 https://doi.org/10.1785/0120200031 (2020).
Lozos, J. C. & Harris, R. A. Dynamic rupture simulations of the M6.4 and M7.1 July 2019 Ridgecrest, California, earthquakes. Geophys. Res. Lett. 47 https://doi.org/10.1029/2019GL086020 (2020).
Townsend, M. R., Pollard, D. D., Johnson, K. & Culha, C. Jointing around magmatic dikes as a precursor to the development of volcanic plugs. Bull. Volcanol. 77, 1–13 https://doi.org/10.1007/s00445-015-0978-z (2015).
Bai, T., Montesi, L., Gross, M. R. & Aydin, A. Orthogonal cross joints: do they imply a regional stress rotation? J. Struct. Geol. 24, 77–88 https://doi.org/10.1016/S0191-8141(01)00050-5 (2002).
Google. Google Earth Pro. https://www.google.com/earth/versions/#earth-pro (2022).
Hudnut, K. W. et al. Airborne lidar and electro‐optical imagery along surface ruptures of the 2019 Ridgecrest earthquake sequence, southern California. Seismol. Res. Lett. https://doi.org/10.1785/0220190338 (2020).
Jennings, C. W., Burnett, J. L. & Troxel, B. W. Geologic map of California, Olaf P. Jenkins Edition, Trona sheet. (1962).
Shelly, D. R. A high-resolution seismic catalog for the initial 2019 Ridgecrest Earthquake Sequence: foreshocks, aftershocks, and faulting complexity. Seismol. Res. Lett. 91, 1971–1978 https://doi.org/10.1785/0220190309 (2020).
Plesch, A., Shaw, J. H., Ross, Z. E. & Hauksson, E. Detailed 3D fault representations for the 2019 Ridgecrest, California, Earthquake Sequence. Bull. Seismol. Soc. Am. 110, 1818–1831 https://doi.org/10.1785/0120200053 (2020).
Jin, Z. & Fialko, Y. Finite slip models of the 2019 Ridgecrest earthquake sequence constrained by space geodetic data and aftershock locations. Bull. Seismol. Soc. Am. 110, 1660–1679 https://doi.org/10.1785/0120200060 (2020).
Langenheim, V. Setting of the Ridgecrest and Searles Valley earthquakes from gravity and magnetic data. Geol. Soc. Am. Annu. Meet. https://doi.org/10.1130/abs/2019AM-342022 (2019).
Hardebeck, J. L. A stress-similarity triggering model for aftershocks of the Mw 6.4 and 7.1 Ridgecrest earthquakes. Bull. Seismol. Soc. Am. 110, 1716–1727 https://doi.org/10.1785/0120200015 (2020).
Davatzes, N. C. & Hickman, S. H. The Feedback Between Stress, Faulting, and Fluid Flow: Lessons from the Coso Geothermal Field, CA, USA. World Geothermal Congress 1–15 (2010).
Fialko, Y. Estimation of absolute stress in the hypocentral region of the 2019 Ridgecrest, California, Earthquakes. J. Geophys. Res. 126, 1–16 https://doi.org/10.1029/2021JB022000 (2021).
Madden, E. H. & Pollard, D. D. Integration of surface slip and aftershocks to constrain the 3D structure of faults involved in the M 7.3 Landers Earthquake, southern California. Bull. Seismol. Soc. Am. 102, 321–342 https://doi.org/10.1785/0120110073 (2012).
Jaeger, J. C., Cook, N. G. W. & Zimmerman, R. W. Fundamentals of Rock Mechanics. 475 (Blackwell Publishing, 2007).
Lu, X., Lapusta, N. & Rosakis, A. J. Pulse-like and crack-like ruptures in experiments mimicking crustal earthquakes. Proc. Natl Acad. Sci. USA 104, 18931–18936 https://doi.org/10.1073/pnas.0704268104 (2007).
Aagaard, B., Knepley, M. & Williams, C. PyLith v2.2.1. (Computational Infrastructure for Geodynamics, 2017).
Morrow, C. A. & Lockner, D. A. Physical properties of two core samples from well 34-9RD2 at the Coso Geothermal Field, Calififornia. U. S. Geological Survey. Open-File Report 2006-1230, 1–32 (2006).
Chen, K. et al. Cascading and pulse-like ruptures during the 2019 Ridgecrest earthquakes in the Eastern California Shear Zone. Nat. Commun. 11, 22 https://doi.org/10.1038/s41467-019-13750-607w (2020).
Delouis, B., Giardini, D., Lundgren, P. & Salichon, J. Joint inversion of InSAR, GPS, teleseismic, and strong-motion data for the spatial and temporal distribution of earthquake slip: application to the 1999 Izmit Mainshock. Bull. Seismol. Soc. Am. 92, 278–299 https://doi.org/10.1785/0120000806 (2002).
Rymer, M. J. et al. Surface fault slip associated with the 2004 Parkfield, California, Earthquake. Bull. Seismol. Soc. Am. 96, S11–S27 https://doi.org/10.1785/0120050830 (2006).
Sharp, R. V. Comparison of 1979 surface faulting with earlier displacements in the Imperial Valley. U. S. Geol. Surv. Profess. Pap. 1254, 213–221 (1982).
King, N. E. & Thatcher, W. The coseismic slip distributions of the 1940 and 1979 Imperial Valley, California, earthquakes and their implications. J. Geophys. Res. 103, 18069–18086 https://doi.org/10.1029/98JB00575 (1998).
Yue, H. et al. The 2019 Ridgecrest, California earthquake sequence: evolution of seismic and aseismic slip on an orthogonal fault system. Earth Planet. Sci. Lett. 570, 1–11 https://doi.org/10.1016/j.epsl.2021.117066 (2021).
Qiu, Q., Barbot, S., Wang, T. & Wei, S. Slip complementarity and triggering between the foreshock, mainshock, and afterslip of the 2019 Ridgecrest rupture sequence. Bull. Seismol. Soc. Am. 110, 1701–1715 https://doi.org/10.1785/0120200037 (2020).
Ampuero, J.-P. & Mao, X. Upper Limit on Damage Zone Thickness Controlled by Seismogenic Depth. in Fault Zone Dynamic Processes: Evolution of Fault Properties During Seismic Rupture, Geophysical Monograph 227 (eds M. Y. Thomas, T. M. Mitchell, & H. S. Bhat) (John Wiley & Sons, Inc., 2017).
Zheng, G. & Rice, J. R. Conditions under which velocity-weakening friction allows a self-healing versus a cracklike mode of rupture. Bull. Seismol. Soc. Am. 88, 1466–1483 (1998).
Dineva, S., Eaton, D., Ma, S. & Mereu, R. The October 2005 Georgian Bay, Canada, Earthquake Sequence: Mafic Dykes and their role in the mechanical heterogeneity of Precambrian Crust. Bull. Seismol. Soc. Am. 97, 457–473 https://doi.org/10.1785/0120060176 (2007).
Nevitt, J. M., Warren, J. M., Kidder, S. & Pollard, D. D. Comparison of thermal modeling, microstructural analysis, and Ti-in-quartz thermobarometry to constrain the thermal history of a cooling pluton during deformation in the Mount Abbot Quadrangle, CA. Geochem. Geophys. Geosyst. 18, 1270–1297 https://doi.org/10.1002/2016gc006655 (2017).
Pennacchioni, G. & Zucchi, E. High temperature fracturing and ductile deformation during cooling of a pluton: the Lake Edison granodiorite (Sierra Nevada batholith, California). J. Struct. Geol. 50, 54–81 https://doi.org/10.1016/j.jsg.2012.06.001 (2013).
Griffith, W. A., Di Toro, G., Pennacchioni, G. & Pollard, D. D. Thin pseudotachylytes in faults of the Mt. Abbot quadrangle, Sierra Nevada: physical constraints for small seismic slip events. J. Struct. Geol. 30, 1086–1094 https://doi.org/10.1016/j.jsg.2008.05.003 (2008).
Morrow, C. A., Moore, D. E. & Lockner, D. A. The effect of mineral bond strength and adsorbed water on fault gouge frictional strength. Geophys. Res. Lett. 27, 815–818 https://doi.org/10.1029/1999GL008401 (2000).
Fagereng, A. & Ikari, M. J. Low-temperature frictional characteristics of chlorite-epidote-amphibole assemblages: implications for strength and seismic style of retrograde fault zones. J. Geophys. Res. 125, 1–16 https://doi.org/10.1029/2020JB019487 (2020).
Byerlee, J. Friction of rocks. Pure Appl. Geophys. 116, 615–626 https://doi.org/10.1007/Bf00876528 (1978).
Fialko, Y. & Jin, Z. Simple shear origin of the cross-faults ruptured in the 2019 Ridgecrest earthquake sequence. Nat. Geosci. 14, 513–518 https://doi.org/10.1038/s41561-021-00758-5 (2021).
Peacock, D. C. P. & Sanderson, D. J. Effects of layering and anisotropy on fault geometry. J. Geol. Soc. Lond. 149, 793–802 https://doi.org/10.1144/gsjgs.149.5.0793 (1992).
Misra, S., Ellis, S. & Mandal, N. Fault damage zones in mechanically layered rocks: the effects of planar anisotropy. J. Geophys. Res. 120, 5432–5452 https://doi.org/10.1002/2014JB011780 (2015).
Sieh, K. et al. Near-field investigations of the landers earthquake sequence, April to July 1992. Science 260, 171–176 https://doi.org/10.1126/science.260.5105.171 (1993).
Treiman, J. A., Kendrick, K. J., Bryant, W. A., Rockwell, T. K. & McGill, S. F. Primary surface rupture associated with the Mw 7.1 16 October 1999 Hector Mine Earthquake, San Bernadino County, California. Bull. Seismol. Soc. Am. 92, 1171–1191 https://doi.org/10.1785/0120000923 (2002).
Atwater, T. Implications of plate tectonics for the Cenozoic Tectonic Evolution of Western North America. Geol. Soc. Am. Bull. 81, 3513–3536 https://doi.org/10.1130/0016-6657606(1970)81[3513:IOPTFT]2.0.CO;2 (1970).
Dokka, R. K. & Travis, C. J. Late Cenozoic strike-slip faulting in the Mojave Desert, California. Tectonics 9, 311–340 https://doi.org/10.1029/TC009i002p00311 (1990).
Wesnousky, S. G. The San Andreas and Walker Lane fault systems, western North America: transpression, transtension, cumulative slip and the structural evolution of a major transform plate boundary. J. Struct. Geol. 27, 1505–1512 (2005).
MathWorks. MATLAB R2021a. https://www.mathworks.com/products/matlab.html (2021).
QGIS.org. QGIS Geographic Information System. Open Source Geospatial Foundation Project. http://qgis.org. (2020).
Sandia National Laboratories. CUBIT 15.5 User Documentation. Sandia Technical Report, SAND2019 3478W. (2019).
NASA SRTM. NASA Shuttle Radar Topography Mission (SRTM) Global. Distributed by OpenTopography, https://doi.org/10.5069/G9445JDFhttps://doi.org/10.5069/G9445JDF (2013).
Barnhart, W. D. 2019 Ridgecrest, CA Pre-Earthquake Digital Surface Model. Distributed by OpenTopography, https://doi.org/10.5069/G998854C (2019).
Acknowledgements
We thank Ruth Harris, Ramon Arrowsmith, and Andy Barbour for providing constructive feedback on an early version of this manuscript. This work benefitted from discussions with David Pollard and Meredith Townsend and would not have been possible without childcare support from Teresa and Andy Nevitt during the COVID-19 pandemic. Brian Carl provided a map from his PhD thesis of the Independence dikes in the Spangler Hills. Kelly Blake, Jade Zimmerman, and Eric Cassady facilitated field access at the Naval Air Weapons Station China Lake. Digital elevation models in Figs. 1, 2, and 4 were provided by the OpenTopography Facility with support from the National Science Foundation under NSF Award Numbers 1948997, 1948994, and 1948857. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
Author information
Authors and Affiliations
Contributions
J.M.N. conceived the study, analyzed the published field data, mapped and analyzed the dikes, made the field observations, calculated the tractions, developed and ran the finite-element models, and interpreted the results. B.A.B. analyzed the published field data and interpreted the results. J.L.H. provided the background stress field at 2 km depth and calculated stress changes due to the M6.4 foreshock. B.T.A. developed the finite-element models. All authors contributed to the writing of the paper.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Yuri Fialko and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Nevitt, J.M., Brooks, B.A., Hardebeck, J.L. et al. 2019 M7.1 Ridgecrest earthquake slip distribution controlled by fault geometry inherited from Independence dike swarm. Nat Commun 14, 1546 (2023). https://doi.org/10.1038/s41467-023-36840-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-36840-2
- Springer Nature Limited