Abstract
The development of novel methodologies for the introduction of the sulfoxonium group under mild conditions is appealing but remains underexplored. Herein we report the synthesis of a class of hypervalent iodine reagents with a transferrable sulfoxonium group. These compounds enable mixed iodonium-sulfoxonium ylide reactivity. These well-defined reagents are examined in visible-light-promoted cyclization reactions with a wide range of unsaturated bonds including alkenes, alkynes, nitriles, and allenes. Two distinct cyclization pathways are identified, which are controlled by the substituent of the unsaturated bond. The cycloaddition protocol features simple operation, mild reaction conditions, and excellent functional group tolerance, affording a broad range of sulfoxonium-containing cyclic structures in moderate to excellent yields. Furthermore, the sufoxonium group in the product can be transformed into diverse functional groups and structural motifs via single electron transfer and transition-metal catalysis.
Similar content being viewed by others
Introduction
Hypervalent sulfur-containing compounds are defined as molecules in which the central sulfur atoms are bonded to more than four pairs of valence electrons1. During the past few decades, studies of hypervalent sulfur compounds have undergone tremendous growth owing to their biological relevance and chemical versatility2,3,4,5,6. There has been a remarkable renewal of interest in molecular design, synthesis, and reactivity exploration of hypervalent sulfur compounds, such as sulfonamides7,8 and sulfones9,10,11, etc. In contrast, sulfoxonium, a class of S(VI) compounds with a S = O double bond and three attached carbons remain underexplored. Compared to its S(IV) analogs, sulfonium salts12,13,14,15,16, sulfoxonium compounds exhibit higher nucleofugality, increased stability, and decreased basicity. Among them, sulfoxonium ylides have been explored as a diazo-free carbene precursor in synthesis17,18,19,20,21. It has been established that sulfoxonium ylides readily form metal-carbenoids in the presence of transition metals and undergo X–H insertion22,23,24,25,26,27,28,29 and C–H activation reactions30,31,32,33,34. Recently, the groups of Burtoloso35 and Sun36 demonstrated that sulfoxonium ylides could be protonated using a chiral Brønsted acid and subsequently undergo enantioselective displacement to form chiral C–S and C–N bonds (Fig. 1a). Despite these advances, exploration of sulfoxonium ylides and their derivatives has been very limited, largely due to the narrow scope of accessible sulfoxonium compounds. The most common method to prepare sulfoxonium salts is the nucleophilic displacement of electrophilic halides with dimethyloxosulfonium methylide (the Corey-Chaykovsky reagent, Fig. 1b)37. Monofunctional sulfoxonium ylides could be further branched by reacting with arynes38 or (hetero)aryl electrophiles39,40. An alternative approach applies insertion reactions of sulfoxides into active methylene compounds41 or carbenes42,43,44,45,46, which could be generated by thermal, photonic, or transition-metal decomposition of diazo compounds42,43,44 or iodonium ylides45,46. Notwithstanding the development, the structural diversity of known sulfoxonium ylides remains very limited. Installation of an additional functional group at the ylide carbon is particularly challenging. In this work, we report a general method to prepare an I(III)/S(VI) reagent and describe its reactivity towards unsaturated bonds.
Results
Synthesis of the I(III)/S(VI) reagent
In sulfoxonium ylide-mediated insertion reactions, the sulfoxonium group inevitably falls off to give the key carbene intermediate. To access structurally complex sulfoxonium compounds, we decided to develop a sulfoxonium transfer process using an I(III)/S(VI) reagent. Hypervalent iodine(III) reagents have attracted widespread interest in the synthetic community owing to their capability of transferring functional groups of the same oxidation state47,48. In this context, several examples of defined hypervalent iodine reagents containing transferable hypervalent functional groups such as phosphonium49,50,51 and arsonium groups52,53 have been successfully developed for use in single-electron transfer (SET) or electrophilic substitution reactions. Among them, sulfur-containing hypervalent iodine reagents remains scarcely investigated and only one sulfonium variant has been reported by Podrugina and co-workers54. However, this S(IV) embedded structure was reported to be highly unstable above −10 °C and unable to be isolated. Little was known of its reactivity. We envisaged that a sulfoxonium substitution with a higher S oxidation state might stabilize the negative charge of ylide carbon, offering both stability and new reactivity of I, S-mixed ylides. In this context, we report the design, synthesis, and X-ray structural characterization of I(III)/S(VI) reagents and their use in photochemical cycloaddition reactions with various unsaturated bonds to afford [3 + 2] or [4 + 2] products containing sulfoxonium functionality (Fig. 1c).
Our initial efforts focused on the synthesis of the I(III)/S(VI) reagent 3 (Fig. 2). Concerning the stability of 3, we decided to first synthesize cyclic analogs with a stabilizing ortho-carboxylate group, a trick often applied to I(III) compounds47. 1-Acetoxy-1,2-benziodoxol-3(1H)-one 1a underwent smooth ligand exchange with α-ketosulfoxonium ylides 2 to give the desired products 3a and 3b in moderate yield using pyridine and trimethylsilyl triflate (Fig. 2). These compounds are white solids and have reasonable stability in either the solid state or in solution at ambient temperature over an extended time. The corresponding acyclic analogs were prepared from diacetoxyiodobenzene 1b using a strong Brønsted acid. Excellent yields were obtained on gram scales (see Supplementary Methods for more details). These acyclic reagents (3c-3w) are relatively less stable compared to 3a and 3b. They could be stored at −20 °C for several weeks, but gradually decompose at room temperature in a solid state. The counterion of these iodonium salts affects stability, wherein hexafluorophosphates 3c and tetrafluoroborates 3e are more stable than triflates 3d. Versatile substituted aryl- and heteroaryl- derivatives were prepared (3f-s), as well as alkyl substituted analogs (3t, u) using a set of uniform conditions.
The thermal ellipsoids are drawn at 50% probability. 3b: selected torsion: C23-C22-I1-C1 = −5.77(2)°; C22-I1-C1-C2 = 92.69(2)°. Select bond lengths: I-C1 = 2.059(3) Å, I-C22 = 2.130(2) Å, C1-S1 = 1.715(3) Å, C1-C2 = 1.431(3) Å, O2-C2 = 1.230(4) Å. Selected bond angles: C1-I-C22 = 97.35(1)°, C22-I1-O3 = 73.88(9)°. 3e: selected torsion: C1-I1-C11-C12 = −64.99(3)°; C11-I1-C1-F2 = 179.43(1) °. Select bond lengths: I1-C1 = 2.054(4) Å, I1-C11 = 2.111(4) Å, C1-S1 = 1.716(3) Å, C1-C2 = 1.429(6) Å, O1-C2 = 1.248(5) Å. Selected bond angles: C1-I1-C11 = 100.61(1)°, C1-I1-F2 = 80.33(1)°.
The structures of both cyclic (neutral, 3b) and acyclic (cationic, 3e) reagents were unambiguously established by a single-crystal X-ray diffraction analysis (Fig. 2). A closer examination revealed that both 3b and 3e adopt the typical T-shaped geometry of a hypervalent iodine atom47. For 3e, the lengths of both C-I bonds are similar to those in a diaryliodonium salt (2.0–2.1 Å), with a C1-I-C11 bond angle of 100.61(1)°. The distance between the iodine and the nearest fluorine atom on the tetrafluoroborate anion (I ∙ ∙ ∙ FBF3), is 2.965(3) Å with a C11-I1-F2 angle of 178.90(1) °, suggesting a type II halogen bonding contact55. The shortest S ∙ ∙ ∙ F distance is 3.802(3) Å, indicating the absence of secondary bonding between the sulfur atom and the anion56. Partial double-bond connectivity between C1 and C2 (C1-C2 = 1.429(6) Å) was noticed. The coplanar positioning of S1, C1, C2, and O1 atoms (torsion angle = −2.33(5)°) supports the presence of a delocalized S-ylide functionality (S1-C1 = 1.716(3) Å).
Reaction optimization
We next turned our attention to exploring the reactivity of the synthesized I(III)/S(VI) reagents. Considering the high leaving group ability of I(III)57, we envisioned that these molecules might be activated under photochemical conditions, enabling a sulfoxonium transfer to common chemical feedstocks via a sulfoxonium-substituted reactive intermediate. Inspired by the early work of Murphy and co-workers that employed blue LED (light emitting diode) to promote cyclopropanation of iodonium ylides with alkenes58, we commenced to explore the chemical reactivity of 3c towards 4.0 equiv. of 1-hexene in MeCN under blue LED (1 W, λmax452 nm) irradiation. To our delight, the photocycloaddition occurred smoothly to afford [4 + 2] product 5c in 95% isolated yield (Table 1, entry 1). To the best of our knowledge, this benzo-fused cyclic compound is a rare example of ketyl alkyl substituted sulfoxonium ylide. The counter ion of acyclic reagents (3d and 3e) had a moderate effect on the overall conversion (entries 2 and 3). No desired product was detected using the neutral cyclic reagent 3a, likely due to the lower tendency for neutral I(III) to be excited under visible light (entry 4). Solvent screening indicated that halogenated solvents such as DCM decreased reaction efficiency (entry 7). When MeOH was used, neither 5c or O-H insertion products was detected (entry 6). The [4 + 2] cycloaddition becomes sluggish under aerobic condition and no product was formed in the dark (entry 7 and 8). Using 2 equiv. of 1-hexene and irradiating the reaction mixture with white LED lead to slightly lower yields, and very little improvement was realized when prolonging the reaction time to 5 h (entries 9–11).
Examination of substrate scope
Having the optimized conditions in hand, we turned our attention to the substrate scope and limitations of the light-mediated tandem [4 + 2] cycloaddition of unactivated alkenes feedstocks 4 with reagent 3, and the results are summarized in Fig. 3. We were glad to find that this method was able to convert alkene feedstocks containing different straight-chain alkyl substrates into cyclic sulfoxonium ylides, with excellent chemoselectivity (5a-g). The functional group tolerance of this transformation is illustrated using substrates bearing cycloalkanes (5 h), aromatic rings (5i, j), ethers (5k), esters (5l, m), sulfonates (5n), sulfones (5o), and silanes (5p). The regioselectivity of this reaction was confirmed by converting product 5i to a known product (see Supplementary Methods for more details). Furthermore, directing groups were not needed to ensure site-selectivity for a substrate bearing two reactive alkenes (5q). Only the electron-rich terminal alkene was selectively cyclized. E/Z-mixtures of 4r (E/Z = 50:50) and 4s (E/Z = 63:37) resulted in the exclusive formation of trans-substituted 5r and 5s, respectively. These results demonstrated the feasibility of conducting a stereoconvergent cycloaddition reaction. Additional control experiments showed that alkene photoisomerization was not responsible for the stereochemical outcome observed with 5r and 5s. Cyclopentene, cyclohexene, and norbornene led to multi-fused cyclic products 5t, 5u, and 5v in 40%, 60%, and 80% yields, respectively. The crystal structure of 5u unambiguously confirmed these compounds as in cis-configuration. Moreover, 1,1-disubstituted alkene could react smoothly to give product 5w with a quarternary carbon center in high efficiency. Substrates with either methyl or cyclohexyl substituent at the 4-position of the phenyl ring respectively gave 5x in 70% and 5y in 90% yield. Decreasing the electron density on the phenyl group slowed down the cycloaddition and yields were attenuated (5z). Regarding ylides containing more than one nucleophilic site, the reaction afforded products as a mixture of isomers (5aa, ab). Furthermore, our strategy permitted the use of a diverse range of heteroarenes, enabling [4 + 2] processes with thiophenyl (5ac, ad), benzothiophenyl (5ae), and furyls (5af).
Reactions were performed by mixing alkene (0.8 mmol, 4 equiv.) and reagent 3 (0.2 mmol, 1 equiv.) in 1.0 mL of MeCN at room temperature, under irradiation of blue LED for 5 h, isolated yields. See Supplementary Methods for experimental details.
When styrene derivatives were used as a C2 synthon in the photocyclization reaction, instead of getting the 6-membered ring sulfoxonium ylides, we exclusively isolated dihydrofuranyl sulfoxonium products (Fig. 4). After irradiating with blue LED for 3 h, 3c reacted with 1,1-diphenylethylene to give tri-substituted dihydrofuran 7a in 95% yield. Other styrene derivatives, including those containing halogen (7b), phenyl (7c, d), ether (7e), and alkyl (7f) were well tolerated. It is possible that during this [3 + 2] cyclization event, the stability of the in situ generated carbocation dictated the cyclization point. When styrene was employed, the more stable benzylic cation reacted with the oxygen nucleophile (ketone), while a more reactive alkyl cation intermediate was preferentially incepted by the aromatic π-electrons in a Friedel-Crafts manner59,60. Ylides bearing a strong electron-withdrawing cyano-group exhibited poor reactivity, resulting in a 28% yield of 7g. This procedure was successfully applied to a wide range of reagents 3 functionalized with 1-naphthyl (7h), thiophenyl (7i), furyl (7j), and benzyl (7k). 1,1-Disubstituted olefins, which are commercially available or easily accessible from acetophenone, were suitable substrates (7l-n). When 1,2-disubstituted styrenes were used, a synthetic challenging tetrasubstituted dihydrofuran scaffold was prepared (7o and 7p) It is noteworthy that this [3 + 2] process is steoreoconvergent and only the trans-isomers were obtained exclusively, which was confirmed by X-ray diffraction analysis of 7p. Stilbene and β-methylstyrene with either olefin conformation (E or Z) delivered trans-products only (7o and 7p, respectively). (1-Cyclopropylvinyl)benzene reacted smoothly with 3c to the desired [3 + 2] product 7q, with no ring-opening product detected. This result suggests the corresponding benzylic radical was unlikely involved in this process.
Reactions were performed by mixing styrene (0.4 mmol, 2 equiv.) and reagent 3 (0.2 mmol, 1 equiv.) in 1.0 mL of MeCN at room temperature, under irradiation of blue LED for 3 h, isolated yields. See Supplementary Methods for experimental details.
To further explore the reactivity of reagent 3 under visible light radiation, we tested reactions against other unsaturated bonds, such as nitriles, alkynes, and allenes (Fig. 5). Due to the inert reactivity of nitriles, similar cyclization reactions under blue LED did not happen. To our delight, subjecting the I, S-ylide to nitrile as solvent under the irradiation of purple LED or in the presence of Rh2(OAc)4 at 25 °C led to a smooth conversion to the [3 + 2] cycloadduct, isoxazolyl sulfoxonium salts (9a-f) in high yields. More reactive alkynes were converted to multisubstituted furans following the [3 + 2] pathway (10a-c). Reactions of alkyl acetylenes afforded cyclic vinyl,ketyl-disubstituted sulfoxonium ylides via [4 + 2] (11a-c). When allenes were tested, the [4 + 2] cycloaddition at the terminal double bond occurred, resulting in product 13 in 72% yield. It is noteworthy that the reactions involving alkynes and allenes were carried out using acetonitrile as solvent indicating the reactivity of I(III)/S(VI) reagents was highly selective toward carbon-carbon triple bonds. Structurally sophisticated sulfoxonium molecules could be conveniently prepared, which would be highly challenging using existing methods.
Condition A: Reagent 3 (0.2 mmol, 1 equiv.) in 1.0 mL of nitrile solvents, under irradiation of 40 W purple LEDs for 3 h at RT; Condition B: Reagent 3 (0.2 mmol, 1 equiv.) and Rh2(OAc)4 (2 mol%) in 1.0 mL of nitrile solvents, RT, 10 min; Condition C: Alkynes (0.4 mmol, 2 equiv.)/allene (0.4 mmol, 2 equiv.) with reagent 3 (0.2 mmol, 1 equiv.) in 1.0 mL of MeCN at room temperature, under irradiation of blue LED for 3 h. Yields are those of isolated products. See Supplementary Methods for experimental details.
Mechanistic investigations
Mechanistic aspects of the photocycloaddition were investigated. For the [4 + 2] reaction using aliphatic alkenes, no desired products were formed in the presence of metal catalysts (Rh and Cu) or under dark conditions. When TEMPO was added as a radical scavenger, the desired reaction was suppressed (Fig. 6a, left). In contrast, the [3 + 2] cycloaddition involving 1,1-diphenylethylene (6a) could be promoted by these transition metals in the absence of light, albeit in slightly decreased yields (85% using Rh and 60% using Cu). Interestingly, the [3 + 2] cycloaddition was not significantly affected by TEMPO (Fig. 6a, right). These results indicated that two distinct reaction pathways were operative when aliphatic olefins and styrenes were used, respectively. Likely, the [4 + 2] cycloaddition involved radical intermediates and the [3 + 2] reaction was carbene/carbenoid mediated. The complete chemical reactivity was remarkable. The stereodivergent nature of both cycloadditions, when E and Z-alkenes were used, indicated a stepwise cyclization. Furthermore, we observed a substantial decrease in yield when I(III)/S(VI) reagents contained an electron-withdrawing group on the aryl moiety (Fig. 6b), suggesting the involvement of cations. We carried out a photo-promoted [4 + 2] reaction using an allyl amide substrate, in which the amide oxygen would intercept a cation, but not a radical. As expected, the reaction produced the corresponding oxazoline product 13 cleanly (Fig. 6c). We suspected that the cation species for both reaction pathways might be formed by the heterolytic opening of a donor-acceptor cyclopropane intermediate formed by photo-promoted addition of I, S-ylide to olefin. Unfortunately, we could not isolate this key species in these intermolecular reactions. Interestingly, intramolecular reactions did deliver the desired cyclopropane products 14, providing support for this hypothesis (Fig. 6d). Further studies are currently underway to fully elucidate the mechanistic details for the carbon-carbon forming processes and substrate-controlled reaction pathway divergence.
Synthetic derivatizations
The sulfoxonium products were demonstrated as versatile substrates for various transformations. As shown in Fig. 7, product 5i was reduced to cyclic ketone 15 using Raney-Nickel in refluxing isopropanol. Protonation of sulfoxonium ylide 5i with HOTf gave the corresponding sulfoxonium salt (16) in 90% yield and with a 1:1.5 dr ratio. The in situ generated sulfoxonium salt was converted into sulfide 17 in high dr using a Brønsted acid. Compound 7a was a competent electrophile in palladium-catalyzed cross-coupling reactions, leading to the formation of coupled product 18. The sulfoxonium functionality was demethylated by heating with KI in acetone, giving sulfoxide 19. Additionally, sulfoxonium could undergo SET processes using photoredox catalysis to generate the corresponding vinyl radical, which was functionalized to give vinyl dihydrofuran 20 in 70% yield. This oxidative radical polar crossover reaction was a rare example of using sulfoxonium as an oxidative radical precursor61,62,63.
a Raney-Nickel, i-PrOH, reflux. b TfOH, MeCN, RT. c Phosphoric acid, 4-methoxybenzenethiol, 80 °C. d p-Tolylboronicacid, Pd(MeCN)2Cl2, Cs2CO3, MeOH, 50 °C. e Potassium iodide, acetone, reflux. f {Ir[dF(CF3)ppy]2(dtbbpy)}PF6, 1,1-diphenylethylene, Na2CO3, MeCN, Blue LED, RT. See Supplementary Methods for experimental details.
Discussion
We designed and synthesized an I(III)/S(VI) reagent for sulfoxonium transfer reactions. These molecules revealed mixed I, S-ylide characteristics and demonstrated remarkable photocycloaddition reactivity towards a broad scope of unsaturated bonds under ambient blue LED radiation without the need for any catalyst and photosensitizer. Unusual chemical selectivity was observed, which was controlled by the type of unsaturated bonds. For aliphatic substituted double and triple bonds, a formal [4 + 2] cycloaddition occurred to give cyclic ketyl alkyl/vinyl sulfoxonium ylide products. When aryl-substituted unsaturated bonds were employed, a [3 + 2] prevailed, delivering structurally exotic cyclic vinyl sulfoxonium salts. The diverse reactivity of the sulfoxonium functionality in the products could be exploited in further chemical derivatizations.
Methods
General procedure for photochemical cycloaddition reaction with I(III)/S(VI) reagents
In a typical experiment, to a 10 mL oven-dried tube equipped with a stirring bar was added reagent 3e (108.8 mg, 0.2 mmol), cyclohexene 4u (65.7 mg, 0.8 mmol), anhydrous MeCN (1.0 mL). The reaction vial was capped with a rubber septum under an argon atmosphere, and it was fixed on a SynLED 4 × 4 photoreactor (SynLED discoverTM 452 nm, 1 W, designed and manufactured by Shenzhen SynLED Tech. Ltd.) for 5 h. The solvent was removed under vacuum and the crude mixture was purified by flash column chromatography to yield the corresponding products 5u (33.1 mg, 60%). The reactions with other kinds of unsaturated compounds were carried out similarly and the procedures are presented in Supplementary Methods.
Data availability
Detailed experimental procedures and characterization of structurally novel compounds, mechanistic studies, and DFT calculation results are available in Supplementary Methods. For NMR spectra of structurally novel compounds, see Supplementary Figures. The crystallographic data generated in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC) under deposition numbers 2068912 (3b), 2068911 (3e), 2128359 (5 u), 2128864(7p) 2152681 (9e), 2144537 (11a). These crystallographic data can be obtained free of charge from the Cambridge Crystallographic Data Centre via http://www.ccdc.cam.ac.uk/data_request/cif. Further relevant data are available from the corresponding author upon request.
References
Crabtree, R. H. Hypervalency, secondary bonding and hydrogen bonding: siblings under the skin. Chem. Soc. Rev. 46, 1720–1729 (2017).
Feng, M., Tang, B. H., Liang, S. & Jiang, X. Sulfur containing scaffolds in drugs: synthesis and application in medicinal chemistry. Curr. Top. Med. Chem. 16, 1200–1216 (2016).
Ilardi, E. A., Vitaku, E. & Njardarson, J. T. Data-mining for sulfur and fluorine: an evaluation of pharmaceuticals to reveal opportunities for drug design and discovery. J. Med. Chem. 57, 2832–2842 (2013).
Scott, K. A. & Njardarson, J. T. Analysis of US FDA-approved drugs containing sulfur atoms. Top. Curr. Chem. 376, 5 (2018).
Cinar, M. E. & Ozturk, T. Thienothiophenes, dithienothiophenes, and thienoacenes: syntheses, oligomers, polymers, and properties. Chem. Rev. 115, 3036–3140 (2015).
Devendar, P. & Yang, G-F. Sulfur-containing agrochemicals. Top. Curr. Chem. 375, 82 (2017).
Apaydın, S. & Török, M. Sulfonamide derivatives as multi-target agents for complex diseases. Bioorg. Med. Chem. Lett. 29, 2042–2050 (2019).
Mondal, S. & Malakar, S. Synthesis of sulfonamide and their synthetic and therapeutic applications: Recent advances. Tetrahedron 76, 131662 (2020).
Wang, M. & Jiang, X. The same oxidation-state introduction of hypervalent sulfur via transition-metal catalysis. Chem. Rec. 21, 3338–3355 (2021).
Zhu, C., Cai, Y. & Jiang, H. Recent advances for the synthesis of chiral sulfones with the sulfone moiety directly connected to the chiral center. Org. Chem. Front. 8, 5574–5589 (2021).
Back, T. G., Clary, K. N. & Gao, D. Cycloadditions and cyclizations of acetylenic, allenic, and conjugated dienyl sulfones. Chem. Rev. 110, 4498–4553 (2010).
Kaiser, D., Klose, I., Oost, R., Neuhaus, J. & Maulide, N. Bond-forming and -breaking reactions at sulfur(IV): sulfoxides, sulfonium salts, sulfur ylides, and sulfinate salts. Chem. Rev. 119, 8701–8780 (2019).
Tian, Z.-Y., Hu, Y.-T., Teng, H.-B. & Zhang, C.-P. Application of arylsulfonium salts as arylation reagents. Tetrahedron Lett. 59, 299–309 (2018).
Kozhushkov, S. I. & Alcarazo, M. Synthetic applications of sulfonium salts. Eur. J. Inorg. Chem. 2020, 2486–2500 (2020).
Zhang, C.-P., Tian, Z.-Y. & Ma, Y. Alkylation reactions with alkylsulfonium salts. Synthesis 54, 1478–1502 (2021).
Ritter, T. & Berger, F. Site-selective late-stage C–H functionalization via thianthrenium salts. Synlett 33, 339–345 (2021).
Bayer, A. & Vaitla, J. Sulfoxonium ylide derived metal carbenoids in organic synthesis. Synthesis 51, 612–628 (2018).
Burtoloso, A. C. B., Dias, R. M. P. & Leonarczyk, I. A. Sulfoxonium and sulfonium ylides as diazocarbonyl equivalents in metal-catalyzed insertion reactions. Eur. J. Org. Chem. 2013, 5005–5016 (2013).
Neuhaus, J. D., Oost, R., Merad, J. & Maulide, N. Sulfur-based ylides in transition-metal-catalysed processes. Top. Curr. Chem. 376, 15 (2018).
Bisag, G. D., Ruggieri, S., Fochi, M. & Bernardi, L. Sulfoxonium ylides: simple compounds with chameleonic reactivity. Org. Biomol. Chem. 18, 8793–8809 (2020).
Caiuby, C. A. D., Furniel, L. G. & Burtoloso, A. C. B. Asymmetric transformations from sulfoxonium ylides. Chem. Sci. 13, 1192–1209 (2022).
Leveille, A. N., Echemendía, R., Mattson, A. E. & Burtoloso, A. C. B. Enantioselective indole insertion reactions of α-carbonyl sulfoxonium ylides. Org. Lett. 23, 9446–9450 (2021).
Liu, X., Shao, Y. & Sun, J. Ruthenium-catalyzed chemoselective N–H bond insertion reactions of 2-pyridones/7-azaindoles with sulfoxonium ylides. Org. Lett. 23, 1038–1043 (2021).
Furniel, L. G., Echemendía, R. & Burtoloso, A. C. B. Cooperative copper-squaramide catalysis for the enantioselective N–H insertion reaction with sulfoxonium ylides. Chem. Sci. 12, 7453–7459 (2021).
Guo, W. et al. Chiral phosphoric acid catalyzed enantioselective synthesis of alpha-tertiary amino ketones from sulfonium ylides. J. Am. Chem. Soc. 142, 14384–14390 (2020).
Mangion, I. K. & Weisel, M. Gold (I) catalysis of X–H bond insertions. Tetrahedron Lett. 51, 5490–5492 (2010).
Dias, R. M. & Burtoloso, A. C. Catalyst-free insertion of sulfoxonium ylides into aryl thiols. a direct preparation of beta-keto thioethers. Org. Lett. 18, 3034–3037 (2016).
Li, J. et al. Iridium-catalyzed B-H bond insertion reactions using sulfoxonium ylides as carbene precursors toward alpha-boryl carbonyls. Org. Lett. 21, 9005–9008 (2019).
Zhang, S. S. et al. Iridium-catalyzed B-H insertion of sulfoxonium ylides and borane adducts: a versatile platform to alpha-boryl carbonyls. Chem. Commun. 56, 423–426 (2020).
Clare, D., Dobson, B. C., Inglesby, P. A. & Aïssa, C. Chemospecific cyclizations of α-carbonyl sulfoxonium ylides on aryls and heteroaryls. Angew. Chem. Int. Ed. 58, 16198–16202 (2019).
Wang, P., Xu, Y., Sun, J. & Li, X. Rhodium(III)-catalyzed chemo-divergent couplings of sulfoxonium ylides with oxa/azabicyclic olefins. Org. Lett. 21, 8459–8463 (2019).
Tang, Z., Zhou, Y. & Song, Q. Synthesis of furoxans and isoxazoles via divergent [2 + 1 + 1 + 1] annulations of sulfoxonium ylides and (t)BuONO. Org. Lett. 21, 5273–5276 (2019).
Chen, P., Nan, J., Hu, Y., Ma, Q. & Ma, Y. Ru(II)-catalyzed/NH2-assisted selective alkenyl C-H [5 + 1] annulation of alkenylanilines with sulfoxonium ylides to quinolines. Org. Lett. 21, 4812–4815 (2019).
Wen, S., Lv, W., Ba, D., Liu, J. & Cheng, G. Ruthenium(ii)-catalyzed chemoselective deacylative annulation of 1,3-diones with sulfoxonium ylides via C-C bond activation. Chem. Sci. 10, 9104–9108 (2019).
Momo, P. B. et al. Enantioselective S-H insertion reactions of alpha-carbonyl sulfoxonium ylides. Angew. Chem. Int. Ed. 59, 15554–15559 (2020).
Guo, W., Wang, M., Han, Z., Huang, H. & Sun, J. Organocatalytic asymmetric synthesis of α-amino esters from sulfoxonium ylides. Chem. Sci. 12, 11191–11196 (2021).
Corey, E. J. & Chaykovsky, M. Dimethyloxosulfonium methylide ((CH3)2SOCH2) and dimethylsulfonium methylide ((CH3)2SCH2). Formation and application to organic synthesis. J. Am. Chem. Soc. 87, 1353–1364 (1965).
Talero, A. G., Martins, B. S. & Burtoloso, A. C. B. Coupling of sulfoxonium ylides with arynes: a direct synthesis of pro-chiral aryl ketosulfoxonium ylides and its application in the preparation of alpha-aryl ketones. Org. Lett. 20, 7206–7211 (2018).
Janot, C., Palamini, P., Dobson, B. C., Muir, J. & Aissa, C. Palladium-catalyzed synthesis of bis-substituted sulfoxonium ylides. Org. Lett. 21, 296–299 (2019).
Yuan, Y. & Wu, X. F. Direct access to 1,1-dicarbonyl sulfoxonium ylides from aryl halides or triflates: palladium-catalyzed carbonylation. Org. Lett. 21, 5310–5314 (2019).
Huang, X., Goddard, R. & Maulide, N. A direct ylide transfer to carbonyl derivatives and heteroaromatic compounds. Angew. Chem. Int. Ed. 49, 8979–8983 (2010).
Ando, W., Yagihara, T., Tozune, S., Nakaido, S. & Migita, T. Synthesis of stable sulfonium and sulfoxonium ylides thermal-and photo-decomposition of diazo-carbonyl compounds in sulfides and sulfoxides. Tetrahedron Lett. 10, 1979–1982 (1969).
Dost, F. & Gosselck, J. Zur reaktion von α-carbonyldiazoverbindungen mit dimethyl-sulfoxid. Tetrahedron Lett. 11, 5091–5093 (1970).
Moody, C. J., Slawin, A. M. Z., Taylor, R. J. & Williams, D. J. Rhodium carbenoid mediated cyclisations. Synthesis and x-ray structures of cyclic sulphoxonium ylides. Tetrahedron Lett. 29, 6009–6012 (1988).
Vaitla, J., Hopmann, K. H. & Bayer, A. Rhodium-catalyzed synthesis of sulfur ylides via in situ generated iodonium ylides. Org. Lett. 19, 6688–6691 (2017).
Zhu, C. et al. Design, preparation, X-ray crystal structure, and reactivity of o-alkoxyphenyliodonium bis(methoxycarbonyl)methanide, a highly soluble carbene precursor. Org. Lett. 14, 3170–3173 (2012).
Yoshimura, A. & Zhdankin, V. V. Advances in synthetic applications of hypervalent iodine compounds. Chem. Rev. 116, 3328–3435 (2016).
Chen, C., Wang, X. & Yang, T. Recent synthetic applications of the hypervalent iodine(III) reagents in visible-light-induced photoredox catalysis. Front. Chem. 8, 551159 (2020).
Moriarty, R. M., Prakash, I., Prakash, O. & Freeman, W. A. Hypervalent iodine. Mixed iodonium ylides. J. Am. Chem. Soc. 106, 6082–6084 (1984).
Zhdankin, V. V. et al. Preparation and chemistry of phosphoranyl-derived iodanes. J. Org. Chem. 68, 1018–1023 (2003).
Zhdankin, V. V., Maydanovych, O., Herschbach, J., McDonald, R. & Tykwinski, R. R. Preparation, structure, and unexpected chemistry of phosphoranyl-derived benziodoxoles. J. Am. Chem. Soc. 124, 11614–11615 (2002).
Huang, Z., Yu, X. & Huang, X. α-Hypervalent iodine functionalized phosphonium and arsonium ylides and their tandem reaction as umpolung reagents. J. Org. Chem. 67, 8261–8264 (2002).
Huang, Z.-Z., Yu, X.-C. & Huang, X. Tandem reaction of α-hypervalent iodo functionalized phosphonium and arsonium ylides as umpolung reagents. Tetrahedron Lett. 43, 6823–6825 (2002).
Podrugina, T. A. et al. Mixed arsonium–iodonium and sulfonium–iodonium ylides: synthesis and characteristics. Tetrahedron 72, 6955–6962 (2016).
Metrangolo, P. & Resnati, G. Type II halogen···halogen contacts are halogen bonds. IUCrJ 1, 5–7 (2013).
Mantina, M., Chamberlin, A. C., Valero, R., Cramer, C. J. & Truhlar, D. G. Consistent van der Waals radii for the whole main group. J. Phys. Chem. A 113, 5806–5812 (2009).
Okuyama, T., Takino, T., Sueda, T. & Ochiai, M. Solvolysis of cyclohexenyliodonium salt, a new precursor for the vinyl cation: remarkable nucleofugality of the phenyliodonio group and evidence for internal return from an intimate ion-molecule pair. J. Am. Chem. Soc. 117, 3360–3367 (2002).
Chidley, T. et al. Blue LED irradiation of iodonium ylides gives diradical intermediates for efficient metal-free cyclopropanation with alkenes. Angew. Chem. Int. Ed. 58, 16959–16965 (2019).
Friedel, C. & Crafts, J. M. Organic chemistry. J. Chem. Soc. 32, 725–791 (1877).
Rueping, M. & Nachtsheim, B. J. A review of new developments in the Friedel–Crafts alkylation – From green chemistry to asymmetric catalysis. Beilstein J. Org. Chem. 6, 6 (2010).
Sharma, S., Singh, J. & Sharma, A. Visible light assisted radical-polar/polar-radical crossover reactions in organic synthesis. Adv. Synth. Catal. 363, 3146–3169 (2021).
Wiles, R. J. & Molander, G. A. Photoredox-mediated net-neutral radical/polar crossover reactions. Isr. J. Chem. 60, 281–293 (2020).
Tay, N. E. S., Lehnherr, D. & Rovis, T. Photons or electrons? A critical comparison of electrochemistry and photoredox catalysis for organic synthesis. Chem. Rev. 122, 2487–2649 (2021).
Acknowledgements
This work was funded by the National Natural Science Foundation of China (21825101, Y.H.; 22101079, Z.W.), Hong Kong RGC (16300320, Y.H.), and Shenzhen Science and Technology Innovation Commission (SGDX2019081623241924, Y.H.). Z.W. thanks the National Program for Thousand Young Talents of China. We thank Dr. Herman Sung from HKUST and Dr. Xiaoli Pei from Tokyo University for the X-ray diffraction analysis.
Author information
Authors and Affiliations
Contributions
Y.H. and Z.W. conceived and directed the project. L.L., K.D., Y.X., and Z.W. performed the synthetic experiments and analyzed the experimental data. C.M. and S.N. performed the DFT calculations. Y.H. and Z.W. wrote the manuscript with input from all authors. All authors have read and approved the final manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, L., Deng, K., Xing, Y. et al. Synthesis of I(III)/S(VI) reagents and their reactivity in photochemical cycloaddition reactions with unsaturated bonds. Nat Commun 13, 6588 (2022). https://doi.org/10.1038/s41467-022-34401-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-022-34401-7
- Springer Nature Limited