Abstract
Cell-free systems using crude cell extracts present appealing opportunities for designing biosynthetic pathways and enabling sustainable chemical synthesis. However, the lack of tools to effectively manipulate the underlying host metabolism in vitro limits the potential of these systems. Here, we create an integrated framework to address this gap that leverages cell extracts from host strains genetically rewired by multiplexed CRISPR-dCas9 modulation and other metabolic engineering techniques. As a model, we explore conversion of glucose to 2,3-butanediol in extracts from flux-enhanced Saccharomyces cerevisiae strains. We show that cellular flux rewiring in several strains of S. cerevisiae combined with systematic optimization of the cell-free reaction environment significantly increases 2,3-butanediol titers and volumetric productivities, reaching productivities greater than 0.9 g/L-h. We then show the generalizability of the framework by improving cell-free itaconic acid and glycerol biosynthesis. Our coupled in vivo/in vitro metabolic engineering approach opens opportunities for synthetic biology prototyping efforts and cell-free biomanufacturing.
Similar content being viewed by others
Introduction
Microbial bioconversion forms the cornerstone of the biotechnology industry with applications spanning from the food and beverage sector1 to the chemical, fuel, and nutraceutical industries2,3. Among the choice of microbes, the yeast Saccharomyces cerevisiae serves an important role as both a model host organism4,5,6,7 and a suitable industrial biocatalyst8. Through metabolic engineering, this host can be tailored for in vivo production of numerous heterologous products8, including the biofuel butanol9, antioxidant nutraceutical resveratrol10, versatile monomer 3-hydroxypropionic acid11, anti-malarial drug precursor artemisinin12, and diverse bioactive alkaloids13,14,15,16, among others. These production strains are substantially modified through both heterologous pathway complementation and rewiring of metabolic pathways to increase pools of precursor compounds, downregulate or eliminate competing pathways, and/or optimize cofactor regeneration routes2,3,17. Despite the success of these approaches, in vivo biosynthesis of chemical products directly competes with cell growth for carbon and energy while withstanding the constant metabolic burden of producing nonessential metabolites. This creates selective pressure against heterologous or overexpressed pathways18. Balancing this pressure to push forward innovative in vivo biochemical production platforms is a time- and labor-intensive challenge.
In contrast to in vivo biosynthesis, many seminal studies of fundamental biological phenomena have embraced cell-free approaches to elucidate mechanisms behind the genetic code19, eukaryotic translation20,21, and fermentation by yeast22,23, devoid of growth constraints. Platforms for cell-free gene expression (CFE)24,25,26 and cell-free metabolic engineering (CFME)27,28,29,30,31 have recently matured as complementary approaches for bio-discovery and the design of both enzymes and metabolic pathways. Without the cellular impediments of homeostatic maintenance, cell division, and membrane transport, in vitro metabolic systems enable the rapid assembly and testing of large combinations of biosynthetic enzymes. This ultimately provides a biological analogue of combinatorial synthetic chemistry with similar implications for scalability and throughput32,33,34. Such systems have been applied to a growing repertoire of metabolic pathways, including 2,3-butanediol (BDO)35,36, butanol and isobutanol33,37, 3-hydroxybutyrate38, styrene39, the monoterpenes limonene, bisabolene, and pinene34,40, and cannabinoids41, among others28,32. Cell-free systems also offer the ability to explore biosynthetic capabilities using the maximum catalytic rate of enzymes27,29 as well as toxic molecules and chemical conditions outside homeostatic ranges42, such as untreated substrates35, cytotoxic products43, and cytotoxic concentrations of product39. In the case of S. cerevisiae, extracts have been evaluated for the facile assessment of enzyme activity in fatty acids biosynthesis44 and propanediol production45 as well as bio-ethanol production at elevated temperatures46, but the biosynthetic potential of yeast extract remains mostly unexplored for value-added chemical products.
We posit that combining cell-based metabolic engineering for strain optimization with in vitro metabolism platforms can accelerate the ability to build, study, and optimize biosynthetic pathways. Specifically, in vivo systems offer genetic tractability to manipulate and optimize cellular metabolism, while cell-free systems offer a high degree of flexibility to vary enzyme stoichiometry, study enzyme variants, alter cofactor conditions, and assess substrate specificity27,34,47,48.
Here, we set out to create an integrated cellular/cell-free metabolic engineering workflow coupling in vivo genetic rewiring with in vitro activated metabolism. We first established a metabolically active yeast extract capable of converting glucose to both native and heterologous metabolites (ethanol and BDO, respectively). Then using CRISPR-dCas9 rewiring, we demonstrated that extracts constituted from altered cells can exhibit productivities exceeding 10 mM/h and obtain titers of nearly 100 mM BDO (0.9 g/L-h and 9 g/L, respectively). This titer is nearly 3-fold greater than the unmodified extract, and the productivity is comparable to that observed in living cells when normalized on the basis of cell mass. Finally, we exhibited the flexibility and effectiveness of this integrated metabolic engineering approach by showing improved productivities for two additional metabolites, itaconic acid, and glycerol, by generating extracts from genetically rewired yeasts. Collectively, these results demonstrate that cell-based engineering strategies can activate and enhance the metabolic potential of in vitro systems to produce useful small molecules.
Results
Cell extracts from S. cerevisiae produce native and heterologous metabolites
In this study, we aimed to advance and interweave rapid, cell-free technologies and cell-based systems that have been genetically rewired for high flux toward a particular branch of metabolism. The goal was to increase in vitro metabolic potential using value-added chemical products as a model. Before testing the impact of genetic rewiring in cells on cell-free metabolism, we first sought to activate metabolic pathways in yeast cell extracts to convert glucose to both ethanol and 2,3-butanediol (BDO) via native and heterologous enzymes, respectively. Commercial BDO is normally generated from petrochemical processes for applications in flavoring, synthetic rubber, and fuels49,50, making it an appealing target for biosynthesis both in vivo51,52 and in vitro35,36,53. Despite decades of research using yeast cell extracts to elucidate biological principles20,22, few studies have assessed small molecule biosynthesis from heterologous pathways with S. cerevisiae extracts. As such, a yeast cell-free system for heterologous metabolite biosynthesis had not previously been rigorously tested or optimized. To establish such a platform, we began with an extract preparation protocol optimized for S. cerevisiae cell-free gene expression (CFE)54,55. In brief, yeast cultures were grown in 1 L flasks, washed and resuspended in buffer, lysed via high-pressure homogenization, and clarified by centrifugation (Fig. 1a). It was necessary to characterize the metabolic activity of S. cerevisiae cell extract produced through this method, since it was optimized for transcription and translation with catabolism only assessed in the context of ATP regeneration56.
a Schematic overview of yeast cell extract preparation for cell-free reactions. b Metabolic map showing wild-type yeast metabolism in black, heterologous enzymes for BDO strains in blue, and CRISPR effectors expressed by rewired BDO strain. c Initial cell-free comparison of wildtype, BDO, and rewired BDO cell extracts converting glucose to native and heterologous metabolites. Extract from the metabolically rewired BDO strain produces more BDO and less ethanol than extract from the unmodified BDO strain (***p = 0.001 as determined by a two-tailed Student’s t-test). Data represent mean ± standard deviation of n = 3 technical replicates. Source data are provided as a Source Data file.
Both a BY4741 wildtype yeast strain expected to convert glucose to ethanol22 and a BY4741 strain producing BDO52 were prepared into an extract to assess metabolic activity in vitro. The BDO strain expressed AlsD and AlsS from Bacillus subtilis to convert pyruvate to acetoin and NoxE from Lactococcus lactis for NAD recycling52 (Fig. 1b). The resulting cell extracts were combined with 120 mM glucose, 1 mM cofactors NAD, ATP, and CoA, as well as salts and buffer and incubated for 20 h at 30 °C. HPLC analysis confirmed that the yeast extracts retained metabolic activity for both native and heterologous pathways (Fig. 1c) with ethanol being produced from both extracts and the desired BDO product being synthesized at lower levels than ethanol, as would be expected from simple heterologous pathway complementation52. Nevertheless, these experiments validated that S. cerevisiae extracts and the conditions utilized here were suitable to produce both endogenous and heterologous metabolites.
Cell extracts from metabolically rewired strains have increased flux toward BDO
The optimization of CFE systems has incorporated several engineered strains for increased protein synthesis yields27,57,58,59 and for specialized applications, such as producing proteins with disulfide bonds60 or noncanonical amino acids61,62. In contrast, nearly all cell-free, crude extract-based metabolite biosynthesis to date has relied on strains with wildtype metabolism expressing pathway enzymes36,38,47 with few examples of strain or extract modifications to increase in vitro product titers63,64. Therefore, we sought to test the central hypothesis of this work with the system described above in place. Specifically, we utilized a modified S. cerevisiae strain that was metabolically rewired for increased BDO production using multiplexed CRISPR-dCas9 modulation65 to simultaneously downregulate ADH1,3,5 and GPD1 to reduce byproduct formation while upregulating endogenous BDH1 to increase flux to BDO (Fig. 1b)52. Cell-free reactions containing extract from the rewired BDO strain indeed retained altered flux to produce on average 46% more BDO and 32% less ethanol than extracts produced from the unmodified BDO strain (Fig. 1c). Moreover, although the BDO pathway itself reduces BY4741 growth rates, the additional rewiring did not further impede cell growth (Supp. Figure 1a) and thus did not extend the extract preparation protocol. Downregulation of transcription for most byproduct genes was confirmed by qPCR, and BDH1 was slightly upregulated (Supp. Figure 1b).
While successful, we wondered whether the cell growth phase at harvest impacted overall cell-free performance. Surprisingly, extracts obtained from cells grown to variable cell densities (OD600 2–8) resulted in comparable concentrations of BDO and byproducts in vitro (Supp. Figure 2b). Based on this robustness (which is atypical for cell-free protein synthesis yields55,66), we selected a harvest OD600 of approximately 8 for subsequent experiments to maximize the volume of recovered extract. Despite the confirmed decrease in GPD1 transcription after CRISPR-mediated rewiring (Supp. Figure 1b), reactions with rewired BDO extracts produced comparable glycerol titers to reactions with unmodified BDO extracts (Supp. Figure 2b). We targeted GPD1 as the dominant, cytosolic isozyme of glycerol-3-phosphate dehydrogenase, but the mitochondrial GPD2 isozyme could also lead to glycerol production67. However, simultaneously decreasing abundance of ADH and GPD enzymes leads to osmotic stress and NADH recycling deficiencies that might not be sufficiently balanced by heterologous NoxE expression and could, therefore, decrease flux toward BDO68,69. Overflow metabolism could also be difficult to overcome through transcriptional rewiring with the large bolus of glucose added to cell-free reactions. These considerations led us to use ethanol as the primary readout for byproduct formation during BDO biosynthesis. Having demonstrated the premise that in vivo metabolic engineering techniques can increase in vitro BDO biosynthesis, we sought to further improve product titers by two approaches as described in the following two sections: reaction optimization and strain background selection.
Cell-free metabolic engineering (CFME) increases BDO titer
As the first layer of optimization, we applied CFME techniques to increase BDO titers27,28,29. To do so, extract concentration, reaction pH, cofactor concentrations, and glucose concentration were sequentially optimized. Low extract concentrations resulted in the incomplete conversion of acetoin to BDO, while high extract concentrations resulted in greater ethanol production, with 6 mg yeast extract protein/mL exhibiting optimal performance (Fig. 2a). As a unique advantage of in vitro systems over in vivo hosts, it was possible to easily alter the reaction pH by directly adding acid or base, thereby revealing different pH optima for ethanol and BDO biosynthesis (Fig. 2b). From this analysis, we found that reactions started at pH 8 were more productive for BDO than those conducted at the initial condition of pH ~7.5. Similar investigations of pH impact on native and heterologous pathways in cell-free systems support this finding39,42,46. Next, we were able to alter the concentrations of key cofactors including NAD, ATP, and CoA. These experiments revealed that the most productive reactions contained 1 mM NAD and 2 mM ATP (Fig. 2c), whereas additional CoA did not significantly impact BDO production (as expected for a pathway without CoA-bound intermediates) (Supp. Figure 3).
a The concentration of rewired BDO cell extract was adjusted to maximize conversion of acetoin to BDO while minimizing ethanol production. b pH was varied in physiologically compatible ranges that would not be possible in vivo to highlight the disparate pH optima for BDO and ethanol biosynthesis in vitro. c NAD and ATP concentrations were covaried to optimize the cofactor pool. d Glucose concentration was varied from 20–200 mM to compare the ratio of BDO to ethanol and the final BDO titer. Data represent mean ± standard deviation of n = 3 technical replicates. Source data are provided as a Source Data file.
Finally, we evaluated the impact of substrate concentrations on cell-free metabolism and uncovered a balance between heterologous small molecule production and overflow metabolism to native byproducts. Specifically, reactions with lower glucose levels (i.e., < 100 mM) favored BDO production and restricted ethanol whereas reactions with more elevated glucose levels saw a substantial overflow of carbon flux toward ethanol and led to decreases in BDO production (Fig. 2d). To maximize the total BDO titer, we subsequently chose 160 mM glucose as it sat at the inflection point between BDO-favoring and ethanol-overflow metabolism regimes. Through this CFME approach, it was possible to increase BDO titer by ~40% with only small differences between initial reaction composition and final parameter selection, thus demonstrating the tunability of CFME systems (compare production in Fig. 1c relative to Fig. 2d).
Strain background selection influences metabolic activity and rewiring
After optimizing the physiochemical environment of cell-free reactions, we sought to evaluate whether the chassis strain selection was critical for in vitro metabolism. To do so, we utilized three strain backgrounds (BY4741, CEN.PK, and Sigma) each rewired using a multiplexed CRISPR-dCas9 approach (Supp. Table 1) and applied the optimized reaction conditions described above (6 mg/mL cell extract, pH 8, 1 mM NAD, 2 mM ATP, and 160 mM glucose). The corresponding extracts for these strains exhibited different behaviors. Cell-free reactions using the BY4741 and Sigma yeast extracts displayed similar biochemical profiles with metabolic rewiring increasing BDO production and decreasing ethanol production, whereas the CEN.PK extracts produced comparable BDO titers with and without rewiring (Fig. 3a). Notably, extract with the highest BDO titers in vitro was derived from the strain that produced the greatest BDO titer in vivo52 (Supp. Figure 4). Specifically, reactions driven by an extract from the rewired BDO Sigma strain produced 96% more BDO and 63% less ethanol than reactions with an extract from the unmodified BDO Sigma background strain. In contrast, glycerol byproduct concentrations remained comparable across all 9 yeast extracts (Supp. Fig. 5). This effort highlights the potential to compare relative pathway performance between cell and cell-free platforms, as we have observed before33.
a Panel of cell-free reactions containing yeast extracts from 3 strain backgrounds with the optimized conditions from Fig. 2. All extracts retained metabolic activity, consuming glucose and producing ethanol and BDO. Extract from the rewired BDO Sigma strain produced the highest BDO titer and was characterized further. b Time course of cell-free reactions containing extract from the rewired BDO Sigma strain showing rapid glucose consumption. c Fed-batch reaction with additions of 45 mM glucose, 1 mM NAD, and 2 mM ATP at 1.5 h intervals. Data represent mean ± standard deviation of n = 3 technical replicates, and time courses represent separate samples quenched at each time point. Source data are provided as a Source Data file.
Finally, to better understand the dynamics of yeast cell-free biosynthesis reactions, we conducted a time course using extract derived from the rewired Sigma strain. These reactions exhibited a substantial increase in volumetric productivity compared to the corresponding strain grown in vivo52 with all the glucose consumed and 80% of the BDO produced within 5 h of incubation (Fig. 3b). Differences in these profiles to the in vivo instantaneous rates of BDO synthesis in the late exponential to early stationary phase (when cells were harvested for extract preparation) suggest further differences between the in vivo and in vitro kinetics beyond biomass production (Supp. Figure 4). Cell-free reactions produced BDO at 10.4 ± 0.2 mM/h (0.93 ± 0.02 g/L-h) to reach 62.4 ± 1.2 mM BDO in 6 h. We next compared this rate to cellular production using empirical values to convert extract protein concentration into relative biomass from the harvested cells. One gram of cells produces ~1 mL of extract, the rewired BDO Sigma extract contained 27 ± 3 mg protein per mL (Supp. Table 2), and optimized reactions contained 6 mg protein per mL. Combining these values results in 216 ± 28 mg cell biomass/mL cell-free reaction, which includes both unlysed cells and insoluble components lost during centrifugation. Comparing BDO synthesis in vivo and in vitro over time (Supp. Table 3) indicates that the cell-free system produces BDO more rapidly than cellular fermentation (Supp. Table 4). However, at the point where product formation stops or significantly slows, (~6 h in vitro and 48 h in vivo), the mass normalized productivity is comparable between the two systems (0.055 ± 0.0038 mmol BDO/h/g cells in vivo and 0.048 ± 0.0062 mmol BDO/h/g cells in vitro) (Supp. Table 4). While similar, direct comparisons are difficult due to the number of assumptions involved. For example, our analysis here only accounts for the time between glucose addition and product analysis (i.e., the biochemical conversion in vivo or in vitro). Extract preparation adds additional time to the overall cell-free process, but product formation still occurs during cell growth prior to lysis. Nevertheless, genetic rewiring that serves to increase desired metabolite production in vivo likewise improves production in vitro.
Based on these rapid cell-free reaction rates, we hypothesized that a fed-batch approach could further maximize BDO titer while maintaining relatively short reaction times36. To accomplish this, it was necessary to increase NAD and ATP supply to enable full glucose utilization with fed-batch spiking (Supp. Fig. 6a, b). Ultimately, fed-batch reactions receiving additional glucose, NAD, and ATP (45, 1, and 2 mM, respectively) at 1.5 h intervals displayed a reduced rate of BDO synthesis, but a higher overall titer of 99.3 ± 2.3 mM (Fig. 3c). The decreased yield observed in this fed-batch system and the requirement of cofactor spiking suggest limitations due to cofactor recycling and/or overflow metabolism, which could potentially be alleviated by increasing NoxE expression or reducing the magnitude of glucose spikes through a continuous feed70.
Extending the integrated cellular/cell-free metabolic engineering approach to alternative metabolites
After demonstrating the impact of using genetically rewired strains to increase flux for cell-free BDO production, we assessed whether the integrated in vivo metabolic rewiring and in vitro biochemical transformation approach was generalizable for alternate products. Specifically, we sought to increase the biological production of itaconic acid, a versatile biochemical precursor for plastics and resins71,72, and glycerol, a ubiquitous additive in commodity chemicals, food products, and industrial sectors73,74. The selection of itaconic acid and glycerol can demonstrate yeast CFME for a low-flux, heterologous pathway, and a high-flux, native pathway, respectively (Fig. 4a). The base strain for itaconic acid production expressed the cis-aconitate decarboxylase gene, CAD1, from Aspergillus terreus, and the enhanced strain expressed this gene in the background with genomic knockouts of ade3 and bna272. The base strain for glycerol production contained an empty plasmid backbone, while the enhanced strain contained a plasmid to overexpress GPD1 and GPP174. Extracts from base strains and metabolically rewired strains were established for both products using methods developed above (Supp. Tables 1–2). An initial pair of glycerol strains was generated through CRISPR-mediated metabolic rewiring with guide RNAs targeting positive effectors to upregulate GPD1 and GPP174, and the resulting extract from the rewired strain produced 18.7% more glycerol than extract from the control strain (Supp. Fig. 7a). This demonstrates the generalizability of in vivo CRISPR-dCas9 rewiring to increase in vitro biosynthesis, but these extracts were unable to consume high concentrations of glucose. For this reason, we carried out further glycerol biosynthesis reactions with extracts from the plasmid-rewired strains to maximize cell-free glycerol titers.
a Metabolic map showing the conversion of glucose to glycerol via dihydroxyacetone phosphate (DHAP) and glycerol-3-phosphate (G3P) or itaconic acid via citrate and cis-aconitate (c-A). b, c Initial cell-free reaction conditions confirm that strains engineered for increased product titers result in cell extracts with greater flux toward products of interest (***p ≤ 0.001 compared to base strain). From a two-tailed Student’s t-test, p = 8.45 × 10−5 for itaconic acid, p = 7.16 × 10−6 for glycerol, and p = 2 × 10−3 for ethanol. d-e Yeast cell-free reactions with optimized conditions rapidly convert glucose into products, resulting in comparable concentrations to in vivo efforts in significantly less time. Data represent mean ± standard deviation of n = 3 technical replicates, and time courses represent separate samples quenched at each time point. Source data are provided as a Source Data file.
Initial reaction conditions reinforce the observations from the BDO extract optimizations that metabolic rewiring in vivo transfers to cell extracts with similarly altered flux. Cell-free reactions containing extract from the enhanced strains produced 94% more itaconic acid and 39% more glycerol than the corresponding reactions with an extract from base strains (Fig. 4b, c). Optimization of reaction conditions further boosted these titers by more than 3-fold (Supp. Figs. 7b, 8b) with tuned reaction conditions producing up to 0.85 ± 0.17 mM itaconic acid in 7 h from 240 mM glucose (Fig. 4d) and up to 472.4 ± 19.3 mM glycerol in 20 h from 500 mM glucose (Fig. 4e). Similar to BDO biosynthesis, the in vitro platform enables relatively high volumetric productivities of 0.12 ± 0.02 mM/h (15.9 ± 3.0 mg/L-h) itaconic acid and 54 ± 0.28 mM/h (4.98 ± 0.03 g/L-h) glycerol in the first 8 h when considering only the time of in vitro bioconversion, since glucose is also converted to the product during cell growth. As a means of studying metabolic limitations, we observed that reactions with an extract from the enhanced strain also produced more itaconic acid than extract from the base strain when provided with citrate instead of glucose as the substrate, suggesting that flux limitations likely stem from the tricarboxylic acid cycle (Supp. Fig. 8a).
Discussion
In this study, we developed an integrated in vivo/in vitro metabolic engineering approach to activate cell-free metabolism by genetically modulating metabolic pathways in yeast source strains used for extract generation. Notably, we found that metabolic rewiring in these strains improves desired productivities in vitro. This reflects previous efforts to engineer strains for CFE to increase protein yields27,57,58 and enable specialized applications60,61,62 through gene knockouts and/or complementation, but the focus here was on reshaping metabolic flux for small molecule synthesis rather than translation. To our knowledge, this is the first report using multiplexed dCas9 modulation to enhance cell-free biosynthesis, using multiple gRNAs that can be implemented and adjusted more rapidly than knocking out enzymes in vivo63 or selectively removing them in vitro64. Our approach has several key features.
First, we found that rewiring source strains used in extract generation coupled to physiochemical optimization lead to significant increases in volumetric productivities. Specifically, we achieved productivities of 10.4 ± 0.2 mM/h for BDO, 0.12 ± 0.02 mM/h for itaconic acid, and 54 ± 0.28 mM/h for glycerol in cell-free biosynthesis reactions, representing increases up to 3-fold above unmodified extracts. Further process optimization and analysis will be required to precisely determine and improve normalized productivities based on the cellular biomass used to generate extracts, but it is worth noting that the product formation reported is product synthesized beyond the biosynthesis that occurs in vivo prior to extracting preparation. This means that cell-free reactions can potentially be used to extend the useful lifespan of cell cultures for metabolite production without the contamination risk or selective pressures associated with continuous culture systems. Fine-tuning the metabolic landscape both before and after cell lysis improves control over biosynthesis by increasing the number of levers available for engineering.
Second, the integrated in vivo/in vitro framework demonstrates the potential for S. cerevisiae extracts in metabolite synthesis. Since Buchner’s original work in yeast extracts led to a Nobel Prize22,23, cell-free biosynthesis efforts in crude extracts have primarily focused on E. coli-based systems27,33,34,36,38 due to the extensive history of optimization for CFE with this bacterium24. Although yeast has been critical to the development of industrial biotechnology, relatively low batch CFE yields56,75 have limited applications of yeast extracts primarily to endogenous metabolic pathways44,45,46. The methodology developed here results in highly productive cell-free reactions, and extending this approach to the biosynthesis of other products could enable new opportunities for studying fundamental metabolic bottlenecks and assessing auxiliary enzymes or cofactors for pathway optimization. With these biochemical analyses in mind, coupling the in vivo/in vitro approach with the immense library of engineered yeast strains from academic and industrial labs could catalyze breakthroughs in the biological production of diverse commodity chemicals and medically relevant compounds3,12,13,14.
Third, the rewiring and lysis approach is generalizable. We successfully applied our framework to multiple base strains of S. cerevisiae (i.e., BY4741, CEN.PK, Sigma) for rapid biosynthesis of native and heterologous chemical products from 3 distinct branches of metabolism as a proof of concept. The broad applicability of CRISPR/dCas9 modulation across species76,77 and the growing repertoire of protocols for cell extract preparation from diverse organisms59,75,78 present an immense application space of rewired metabolism in cell-free contexts. This could include increasing the productivity of established E. coli CFME platforms for high-value molecules30,79,80 and materials38,81 with the potential for scaling up cell-free reactions31,82. Furthermore, this workflow could lead to robust cell-free systems comprising metabolically rewired extracts from species with appealing metabolic capabilities but low-yielding or undeveloped CFE platforms, such as Yarrowia lipolytica83, Pichia pastoris84,85, and Streptomyces spp86,87,88,89,90, increasing opportunities for cell-free prototyping and biomanufacturing applications.
Looking forward, we anticipate that our in vivo/in vitro approach to combine cellular metabolic engineering strategies for flux rewiring with cell-free reaction optimization will enable new directions in cell-free synthetic biology.
Methods
Strains and media
Strains were grown in yeast synthetic complete (YSC) media containing 1.71 g/L yeast nitrogen base (Sunrise Science Products), 5 g/L ammonium sulfate, 20 g/L glucose, and a complete supplement mixture (CSM) with the appropriate dropout(s) to enforce plasmid retention (Sunrise Science Products) according to product specifications. All strains used in this study are described in Supp. Table 1.
Metabolic rewiring via CRISPR
The details of CRISPR rewiring for S. cerevisiae BDO strains were previously described52. Overall, dCas9-VPR is expressed as a dual-mode regulator under the control of TDH3 promoter on a p415 Mumberg plasmid. On the same plasmid, a single guide RNA (sgRNA) cassette including sgRNAs targeting ADH1, ADH3, ADH5, and GPD1 at ORFs and BDH1 at the promoter region is expressed under the control of TEF1 promoter. gRNA sequences are provided in Supp. Table 5. The design of tRNA-sgRNA bricks is applied in the sgRNA cassette (Supp. Table 6). After being expressed, tRNAs will be cut by RNase P and Z to release the processed sgRNAs. For the control strains, a p415 plasmid containing the same TDH3-dCas9-VPR but no sgRNA cassette is used.
The details of CRISPR rewiring for S. cerevisiae glycerol strains were previously described74. Overall, dCas9-VPR is expressed as a gene activator under the control of TDH3 promoter on a p415 Mumberg plasmid. On the same plasmid, two individual sgRNAs targeting GPD1 and GPP1 at promoter regions are expressed under the control of SNR52 promoters. gRNA sequences are provided in Supp. Table 5. For the control strains, a p415 plasmid containing the same TDH3-dCas9-VPR but no sgRNAs is used.
Quantitative PCR
Quantitative PCR (qPCR) was performed to measure the expression of genes that are targeted by the CRISPR/dCas9 modulation in both rewired and control BY4741-BDO strains. Yeast cultures in biological triplicates were inoculated at OD = 0.05 and grown for 19 h at 30 °C to mid-log phase (OD = 0.9–1.2). RNA was extracted using Zymolyase digestion of the yeast cell wall followed by purification using the Quick-RNA MiniPrep kit according to the manufacturer’s instructions (Zymo Research Corp). cDNA was generated from the purified RNA using the Protoscript II Reverse Transcriptase (NEB) with 20 μM d(T)23VN primer. For qPCR experiments, primers for ADH1, ADH3, ADH5, GPD1, BDH1, and ALG9 (Supp. Table 7) were designed using the PrimerBlast tool91 and obtained from Integrated DNA Technologies. Quantitative PCR was performed on a ViiA7 qPCR system (Life Technologies) using SYBR Green Master Mix (Applied Biosystems) with ROX as a passive reference. qPCR was performed according to the manufacturer’s instructions with an annealing temperature of 60 °C and 50 ng of total cDNA product per 10 µL reaction in a 384-well optical plate. All reactions were run in technical triplicates. The data from two biological replicates of rewired strains and three biological replicates of control strains were analyzed. The ALG9 gene was used as a housekeeping gene. The gene expression between rewired and control strains was compared by calculating the difference in the threshold cycle (△Ct) between the individual target genes and ALG9. Error bars represent the standard deviation of △Ct from the biological replicates, and p-values are derived from two-tailed Student’s t-tests.
Buffers and chemicals
Buffer A contained 30 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) adjusted to pH 7.4 with potassium hydroxide, 100 mM potassium glutamate, 2 mM magnesium glutamate, and 2 mM dithiothreitol (DTT). Mannitol Buffer A was identical to Buffer A with the addition of 8.5% (w/v) D-mannitol. Concentrated DTT was added immediately prior to the use of each buffer. All chemicals were purchased from Sigma-Aldrich unless otherwise noted.
Cell extract preparation
Yeast extracts were prepared based on a method modified from previous studies in cell-free protein synthesis54,55. Starter cultures were grown from glycerol stocks to saturation at 30 °C and 250 rpm. These starter cultures were used to inoculate 1 L of appropriate CSM dropout media at OD600 0.1–0.2 in 2.5 L Tunair™ shake flasks (Millipore Sigma) as determined by measurement on a NanoDrop 2000c (ThermoFisher Scientific). Cells were grown to exponential phase (OD600 considerations discussed above), and then cultures were transferred to 1 L centrifuge bottles and pelleted with a 10-min spin at 4000 × g in a rotor cooled to 4 °C. The supernatant was discarded, and each cell pellet was divided into two 50 mL conical tubes. Pellets were resuspended with 10 mL ice-cold Mannitol Buffer A per conical tube and pelleted with a 5 min spin at 4000 × g in a rotor cooled to 4 °C to wash the cells. The supernatant was discarded, and this wash step was repeated 2 more times for a total of 3 washes. Cell suspensions were combined for the final spin to generate a single cell pellet per strain harvested, and cell pellets were weighed prior to flash-freezing in liquid nitrogen.
Frozen cell pellets were thawed on ice for 1 h and resuspended with 1 mL Mannitol Buffer A per gram cell mass. These suspensions were lysed with one pass through an EmulsiFlex‐B15 homogenizer (Avestin) at ~90 psi air pressure (26,000–28,000 psi homogenization pressure). Cellular debris was removed with a 5 min spin at 20,000 × g, and the supernatant was collected for a second spin to remove residual debris. The supernatant from the second spin was transferred to a 3.5 kDa Slide-a-Lyzer™ dialysis cassette (ThermoFisher) and dialyzed for 2 h at 4 °C in 1 L Buffer A with 0.5 mM phenylmethylsulfonyl fluoride (PMSF) and a single buffer exchange after the first hour. Dialyzed extracts were centrifuged again for 5 min at 20,000 × g to remove precipitated proteins. The supernatant was aliquoted and flash-frozen in liquid nitrogen, and extracts were stored at −80 °C until use. The protein content of extracts was determined using a Bradford assay for technical triplicates of 4000-fold, 7000-fold, and 10,000-fold dilutions with bovine serum albumin standards using a BioTek Gen5 microplate reader. All extracts used in this study are described in Supp. Table 2.
Cell-free biosynthesis reactions
20 µL reactions were set up in 1.5 mL tubes and initially run for 20 h in triplicates. Initial reactions for BDO production contained 8 mM magnesium glutamate, 10 mM ammonium glutamate, 134 mM potassium glutamate, 120 mM glucose, 100 mM BisTris buffer, 1 mM adenosine triphosphate (ATP), 1 mM nicotine adenine dinucleotide (NAD), 1 mM coenzyme A (CoA), and 8 mg/mL yeast extract. These parameters were optimized for BDO production in Fig. 3. pH of these reactions was adjusted using glacial acetic acid or potassium hydroxide prior to the addition of yeast extract and cofactors, and initial pH was measured after the addition of all reaction components using an Orion™ ROSS Ultra™ Refillable pH/ATC Triode™ (Thermo Scientific). Initial reactions for itaconic acid and glycerol production contained the same concentrations of salts, glucose, buffer, and CoA as the initial BDO reactions. However, NAD and ATP were increased to 3 mM to facilitate glucose consumption prior to cofactor optimization, and extract concentration was set at 6 mg/ml.
In vivo measurements
Cultures of BDO-producing S. cerevisiae strains were inoculated into 25 mL of YSC media within 250 mL shake flasks (PYREX) at OD600 0.01 in biological triplicates and cultivated at 30 °C. Corresponding cultures were started at three different time points (0, 8, and 14 h) to accomplish 24h-sampling. 1 mL samples were taken intermittently and centrifuged at 16,000 g. The supernatant was filtered with a 0.2 µm sterile syringe filter (VWR International) prior to high-performance liquid chromatography (HPLC) analysis for the production of BDO and the consumption of glucose. Samples were separated using an HPLC Ultimate 3000 (Dionex) equipped with an Aminex HPX-87H ion exclusion column (BioRad) and analyzed using the Chromeleon 7.2 Chromatography Data System (Dionex). A 10 µL injection volume was used in an isocratic mobile phase of 5 mM H2SO4 (pH = 2) at a flow rate of 0.6 mL/min. The column temperature was 60 °C and a refractive index detector (RID) was used at a temperature of 25 °C. A 50 g/L standard stock was made from 98% 2,3-butanediol (Sigma) and serially diluted from 20 g/L to 0.625 g/L to make BDO standards. A 40 g/L standard stock was made from D-(+)-Glucose Anhydrous (MP Biomedicals) and serially diluted from 20 g/L to 0.625 g/L to make glucose standards.
In vitro Metabolite analysis
Reactions were quenched with 20 µL of 10% (w/v) trichloroacetic acid, and precipitated proteins were removed by centrifugation for 10 min at 20,000 × g. The supernatant was transferred to vials and 5 µL were injected on an Agilent 1260 HPLC system. Metabolites were separated with 5 mM sulfuric acid flowing at 0.6 mL/min on a Rezex™ ROA-Organic Acid H+ (8%) LC Column (Aminex) at 20 °C. Metabolite concentrations were determined using a refractive index detector (RID) or a diode array detector (DAD) at 210 nm based on the retention time of standard solutions for each compound. Cell-free reactions were performed in triplicates, and error bars on all figures represent the standard deviation of 3 technical replicates. Significant differences between conditions were determined with a two-tailed Student’s t-test, and time courses were completed with separate samples for each time point prepared from a single master mix. Data were analyzed and visualized using Agilent ChemStation and Microsoft Excel prior to assembly with graphics in Adobe Illustrator.
Reporting summary
Further information on research design is available in the Nature Research Reporting Summary linked to this article.
Data availability
All data generated and analyzed for this study are presented in the manuscript or supplementary information or are available upon request from the corresponding author. There are no restrictions on data availability, and the source data are provided with this publication. Source data are provided with this paper.
References
Legras, J. L. et al. Adaptation of S. cerevisiae to fermented food environments reveals remarkable genome plasticity and the footprints of domestication. Mol. Biol. Evol. 35, 1712–1727 (2018).
Nielsen, J. & Keasling, J. D. Engineering cellular metabolism. Cell 164, 1185–1197 (2016).
Ekas, H., Deaner, M. & Alper, H. S. Recent advancements in fungal-derived fuel and chemical production and commercialization. Curr. Opin. Biotechnol. 57, 1–9 (2019).
Ostergaard, S., Olsson, L. & Nielsen, J. Metabolic engineering of Saccharomyces cerevisiae. Microbiol. Mol. Biol. Rev. 64, 34–50 (2000).
Nevoigt, E. Progress in metabolic engineering of Saccharomyces cerevisiae. Microbiol. Mol. Biol. Rev. 72, 379–412 (2008).
Hong, K. K. & Nielsen, J. Metabolic engineering of Saccharomyces cerevisiae: a key cell factory platform for future biorefineries. Cell Mol. Life Sci. 69, 2671–2690 (2012).
Nielsen, J. & Jewett, M. C. Impact of systems biology on metabolic engineering of Saccharomyces cerevisiae. FEMS Yeast Res. 8, 122–131 (2008).
Lian, J., Mishra, S. & Zhao, H. Recent advances in metabolic engineering of Saccharomyces cerevisiae: New tools and their applications. Metab. Eng. 50, 85–108 (2018).
Schadeweg, V. & Boles, E. Increasing n-butanol production with Saccharomyces cerevisiae by optimizing acetyl-CoA synthesis, NADH levels and trans-2-enoyl-CoA reductase expression. Biotechnol. Biofuels 9, 257 (2016).
Li, M., Schneider, K., Kristensen, M., Borodina, I. & Nielsen, J. Engineering yeast for high-level production of stilbenoid antioxidants. Sci. Rep. 6, 36827 (2016).
Ji, R. Y. et al. Metabolic engineering of yeast for the production of 3-Hydroxypropionic acid. Front. Microbiol. 9, 2185 (2018).
Paddon, C. J. & Keasling, J. D. Semi-synthetic artemisinin: a model for the use of synthetic biology in pharmaceutical development. Nat. Rev. Microbiol. 12, 355–367 (2014).
Galanie, S., Thodey, K., Trenchard, I. J., Interrante, M. F. & Smolke, C. D. Complete biosynthesis of opioids in yeast. Science 349, 1095–1100 (2015).
Milne, N. et al. Metabolic engineering of Saccharomyces cerevisiae for the de novo production of psilocybin and related tryptamine derivatives. Metab. Eng. 60, 25–36 (2020).
Pyne, M. E. et al. A yeast platform for high-level synthesis of tetrahydroisoquinoline alkaloids. Nat. Commun. 11, 3337 (2020).
Srinivasan, P. & Smolke, C. D. Biosynthesis of medicinal tropane alkaloids in yeast. Nature 585, 614–619 (2020).
Tyo, K. E., Alper, H. S. & Stephanopoulos, G. N. Expanding the metabolic engineering toolbox: more options to engineer cells. Trends Biotechnol. 25, 132–137 (2007).
Wu, G. et al. Metabolic burden: cornerstones in synthetic biology and metabolic engineering applications. Trends Biotechnol. 34, 652–664 (2016).
Nirenberg, M. & Matthaei, J. The dependence of cell-free protein synthesis in E. Coli upon naturally ocurring or synthetic polyribonucleotides. PNAS 47, 1588–1602 (1961).
Iizuka, N., Najita, L., Franzusoff, A. & Sarnow, P. Cap-dependent and cap-independent translation by internal initiation of mRNAs in cell extracts prepared from Saccharomyces cerevisiae. Mol. Cell. Biol. 14, 7322–7330 (1994).
Gasior, E., Herrera, S. F., Sadnik, I., McLaughlin, C. S. & Moldave, K. The preparation and characterization of a cell-free system from saccharomyces cerevisiae that translates natural messenger ribonucleic acid. J. Biol. Chem. 254, 3965–3969 (1979).
Buchner, E. Alkoholische gährung ohne hefezellen. Ber. der Dtsch. chemischen Ges. 30, 117–124 (1897).
Kohler, R. Reception of eduard buchner’s discovery of cell-free fermentation. J. Hist. Biol. 5, 327–353 (1972).
Silverman, A. D., Karim, A. S. & Jewett, M. C. Cell-free gene expression: an expanded repertoire of applications. Nat. Rev. Genet. 21, 151–170 (2020).
Hodgman, C. E. & Jewett, M. C. Cell-free synthetic biology: thinking outside the cell. Metab. Eng. 14, 261–269 (2012).
Hershewe, J., Kightlinger, W. & Jewett, M. C. Cell-free systems for accelerating glycoprotein expression and biomanufacturing. J. Ind. Microbiol. Biotechnol. 47, 977–991 (2020).
Swartz, J. R. Expanding biological applications using cell-free metabolic engineering: an overview. Metab. Eng. 50, 156–172 (2018).
Dudley, Q. M., Karim, A. S. & Jewett, M. C. Cell-free metabolic engineering: biomanufacturing beyond the cell. Biotechnol. J. 10, 69–82 (2015).
Lim, H. J. & Kim, D. M. Cell-free metabolic engineering: recent developments and future prospects. Methods Protoc. https://doi.org/10.3390/mps2020033 (2019).
Bogart, J. W. et al. Cell-free exploration of the natural product chemical space. Chembiochem. https://doi.org/10.1002/cbic.202000452 (2020).
Rasor, B. J. et al. Toward sustainable, cell-free biomanufacturing. Current Opin Biotechnol. 69, 136-144 (2021).
Bowie, J. U. et al. Synthetic biochemistry: the bio-inspired cell-free approach to commodity chemical production. Trends Biotechnol. https://doi.org/10.1016/j.tibtech.2019.12.024 (2020).
Karim, A. S. et al. In vitro prototyping and rapid optimization of biosynthetic enzymes for cell design. Nat. Chem. Biol. 16, 912–919 (2020).
Dudley, Q. M., Nash, C. J. & Jewett, M. C. Cell-free biosynthesis of limonene using enzyme-enriched Escherichia coli lysates. Synth. Biol. 4, ysz003 (2019).
Kay, J. E. & Jewett, M. C. A cell-free system for production of 2,3-butanediol is robust to growth-toxic compounds. Metab. Eng. Commun. https://doi.org/10.1016/j.mec.2019.e00114 (2020).
Kay, J. E. & Jewett, M. C. Lysate of engineered Escherichia coli supports high-level conversion of glucose to 2,3-butanediol. Metab. Eng. 32, 133–142 (2015).
Sherkhanov, S. et al. Isobutanol production freed from biological limits using synthetic biochemistry. Nat. Commun. 11, 4292 (2020).
Kelwick, R. et al. Cell-free prototyping strategies for enhancing the sustainable production of polyhydroxyalkanoates bioplastics. Synthetic Biol. https://doi.org/10.1093/synbio/ysy016 (2018).
Grubbe, W. S., Rasor, B. J., Krüger, A., Jewett, M. C. & Karim, A. S. Cell-free biosynthesis of styrene at high titers. Metab. Eng. 61, 89–95 (2020).
Korman, T. P., Opgenorth, P. H. & Bowie, J. U. A synthetic biochemistry platform for cell free production of monoterpenes from glucose. Nat. Commun. 8, 15526 (2017).
Valliere, M. A. et al. A cell-free platform for the prenylation of natural products and application to cannabinoid production. Nat. Commun. 10, 565 (2019).
Karim, A. S., Rasor, B. J. & Jewett, M. C. Enhancing control of cell-free metabolism through pH modulation. Synthetic Biol. https://doi.org/10.1093/synbio/ysz027 (2019).
Rollin, J. A., Tam, T. K. & Zhang, Y. H. P. New biotechnology paradigm: cell-free biosystems for biomanufacturing. Green Chem. https://doi.org/10.1039/c3gc40625c (2013).
Li, X. et al. Overproduction of fatty acids in engineered Saccharomyces cerevisiae. Biotechnol. Bioeng. 111, 1841–1852 (2014).
Cameron, D. C., Altaras, N. E., Hoffman, M. L. & Shaw, A. J. Metabolic engineering of propanediol pathways. Biotechnol. Prog. 14, 116–125 (1998).
Khattak, W. A. et al. Yeast cell-free enzyme system for bio-ethanol production at elevated temperatures. Process Biochem. 49, 357–364 (2014).
Karim, A. S. & Jewett, M. C. A cell-free framework for rapid biosynthetic pathway prototyping and enzyme discovery. Metab. Eng. 36, 116–126 (2016).
Claassens, N. J., Burgener, S., Vogeli, B., Erb, T. J. & Bar-Even, A. A critical comparison of cellular and cell-free bioproduction systems. Curr. Opin. Biotechnol. 60, 221–229 (2019).
Kim, S. J., Kim, J. W., Lee, Y. G., Park, Y. C. & Seo, J. H. Metabolic engineering of Saccharomyces cerevisiae for 2,3-butanediol production. Appl Microbiol. Biotechnol. 101, 2241–2250 (2017).
Hakizimana, O., Matabaro, E. & Lee, B. H. The current strategies and parameters for the enhanced microbial production of 2,3-butanediol. Biotechnol. Rep. 25, e00397 (2020).
Kim, S. & Hahn, J. S. Efficient production of 2,3-butanediol in Saccharomyces cerevisiae by eliminating ethanol and glycerol production and redox rebalancing. Metab. Eng. 31, 94–101 (2015).
Deaner, M., Holzman, A. & Alper, H. S. Modular Ligation extension of guide RNA Operons (LEGO) for multiplexed dCas9 regulation of metabolic pathways in saccharomyces cerevisiae. Biotechnol J. https://doi.org/10.1002/biot.201700582 (2018).
Zhang, L. et al. An artificial synthetic pathway for acetoin, 2,3-butanediol, and 2-butanol production from ethanol using cell free multi-enzyme catalysis. Green. Chem. 20, 230–242 (2018).
Choudhury, A., Hodgman, C. E., Anderson, M. J. & Jewett, M. C. Evaluating fermentation effects on cell growth and crude extract metabolic activity for improved yeast cell-free protein synthesis. Biochem. Eng. J. 91, 140–148 (2014).
Hodgman, C. E. & Jewett, M. C. Optimized extract preparation methods and reaction conditions for improved yeast cell-free protein synthesis. Biotechnol. Bioeng. 110, 2643–2654 (2013).
Anderson, M. J., Stark, J. C., Hodgman, C. E. & Jewett, M. C. Energizing eukaryotic cell-free protein synthesis with glucose metabolism. FEBS Lett. 589, 1723–1727 (2015).
Contreras-Llano, L. E. et al. Holistic engineering of cell-free systems through proteome-reprogramming synthetic circuits. Nat. Commun. 11, 3138 (2020).
Schoborg, J. A., Clark, L. G., Choudhury, A., Hodgman, C. E. & Jewett, M. C. Yeast knockout library allows for efficient testing of genomic mutations for cell-free protein synthesis. Synth. Syst. Biotechnol. 1, 2–6 (2016).
Cole, S. D., Miklos, A. E., Chiao, A. C., Sun, Z. Z. & Lux, M. W. Methodologies for preparation of prokaryotic extracts for cell-free expression systems. Synth. Syst. Biotechnol. 5, 252–267 (2020).
Dopp, J. L. & Reuel, N. F. Simple, functional, inexpensive cell extract for in vitro prototyping of proteins with disulfide bonds. Biochem. Eng. J. https://doi.org/10.1016/j.bej.2020.107790 (2020).
Martin, R. W. et al. Cell-free protein synthesis from genomically recoded bacteria enables multisite incorporation of noncanonical amino acids. Nat. Commun. 9, 1203 (2018).
Adachi, J. et al. Cell-free protein synthesis using S30 extracts from Escherichia coli RFzero strains for efficient incorporation of non-natural amino acids into proteins. Int. J. Mol. Sci. https://doi.org/10.3390/ijms20030492 (2019).
Dudley, Q. M., Anderson, K. C. & Jewett, M. C. Cell-free mixing of Escherichia coli crude extracts to prototype and rationally engineer high-titer mevalonate synthesis. ACS Synth. Biol. 5, 1578–1588 (2016).
Garcia, D. C. et al. A lysate proteome engineering strategy for enhancing cell-free metabolite production. Metab. Eng. Commun. 12, e00162 (2021).
Qi, L. S. et al. Repurposing CRISPR as an RNA-guided platform for sequence-specific control of gene expression. Cell 152, 1173–1183 (2013).
Kwon, Y. C. & Jewett, M. C. High-throughput preparation methods of crude extract for robust cell-free protein synthesis. Sci. Rep. 5, 8663 (2015).
Eriksson, P., Andre, L., Ansell, R., Blomberg, A. & Adler, L. Cloning and characterization of GPD2, a second gene encoding sn-glycerol 3-phosphate dehydrogenase (NAD +) in Saccharomyces cerevisiae, and its comparison with GPD1. Mol. Microbiol. 17, 95–107 (1995).
Ng, C. Y., Jung, M. Y., Lee, J. & Oh, M. K. Production of 2,3-butanediol in Saccharomyces cerevisiae by in silico aided metabolic engineering. Microb Cell Fact https://doi.org/10.1186/1475-2859-11-68 (2012).
Hubmann, G., Guillouet, S. & Nevoigt, E. Gpd1 and Gpd2 fine-tuning for sustainable reduction of glycerol formation in Saccharomyces cerevisiae. Appl Environ. Microbiol. 77, 5857–5867 (2011).
Vemuri, G. N., Eiteman, M. A., McEwen, J. E., Olsson, L. & Nielsen, J. Increasing NADH oxidation reduces overflow metabolism in Saccharomyces cerevisiae. PNAS 104, 2402–2407 (2007).
Steiger, M. G., Blumhoff, M. L., Mattanovich, D. & Sauer, M. Biochemistry of microbial itaconic acid production. Front. Microbiol. 4, 23 (2013).
Blazeck, J. et al. Metabolic engineering of Saccharomyces cerevisiae for itaconic acid production. Appl Microbiol. Biotechnol. 98, 8155–8164 (2014).
Tan, H. W., Abdul Aziz, A. R. & Aroua, M. K. Glycerol production and its applications as a raw material: a review. Renew. Sustain. Energy Rev. 27, 118–127 (2013).
Deaner, M. & Alper, H. S. Systematic testing of enzyme perturbation sensitivities via graded dCas9 modulation in Saccharomyces cerevisiae. Metab. Eng. 40, 14–22 (2017).
Gregorio, N. E., Levine, M. Z. & Oza, J. P. A user’s Guide to cell-free protein synthesis. Methods Protocols https://doi.org/10.3390/mps2010024 (2019).
Liu, Z., Dong, H., Cui, Y., Cong, L. & Zhang, D. Application of different types of CRISPR/Cas-based systems in bacteria. Micro. Cell Fact. 19, 172 (2020).
Raschmanova, H., Weninger, A., Glieder, A., Kovar, K. & Vogl, T. Implementing CRISPR-Cas technologies in conventional and non-conventional yeasts: current state and future prospects. Biotechnol. Adv. 36, 641–665 (2018).
Yim, S. S. et al. Multiplex transcriptional characterizations across diverse bacterial species using cell-free systems. Mol. Syst. Biol. 15, e8875 (2019).
Dudley, Q. M., Karim, A. S., Nash, C. J. & Jewett, M. C. In vitro prototyping of limonene biosynthesis using cell-free protein synthesis. Metab. Eng. 61, 251–260 (2020).
Li, J., Zhang, L. & Liu, W. Cell-free synthetic biology for in vitro biosynthesis of pharmaceutical natural products. Synth. Syst. Biotechnol. 3, 83–89 (2018).
Kelwick, R. J. R., Webb, A. J. & Freemont, P. S. Biological materials: the next frontier for cell-free synthetic biology. Front. Bioeng. Biotechnol. 8, 399 (2020).
Bundy, B. C. et al. Cell-free biomanufacturing. Curr. Opin. Chem. Eng. 22, 177–183 (2018).
Ma, J., Gu, Y., Marsafari, M. & Xu, P. Synthetic biology, systems biology, and metabolic engineering of Yarrowia lipolytica toward a sustainable biorefinery platform. J. Ind. Microbiol. Biotechnol. 47, 845–862 (2020).
Aw, R. & Polizzi, K. M. Biosensor-assisted engineering of a high-yield Pichia pastoris cell-free protein synthesis platform. Biotechnol. Bioeng. 116, 656–666 (2019).
Zhang, L., Liu, W. Q. & Li, J. Establishing a Eukaryotic Pichia pastoris cell-free protein synthesis system. Front. Bioeng. Biotechnol. 8, 536 (2020).
Moore, S. J., Lai, H. E., Needham, H., Polizzi, K. M. & Freemont, P. S. Streptomyces venezuelae TX-TL - a next generation cell-free synthetic biology tool. Biotechnol. J. https://doi.org/10.1002/biot.201600678 (2017).
Zhuang, L. et al. Total in vitro biosynthesis of the nonribosomal macrolactone peptide valinomycin. Metab. Eng. 60, 37–44 (2020).
Moore, S. J. et al. A streptomyces venezuelae cell-free toolkit for synthetic biology. ACS Synth. Biol. 10, 402–411 (2021).
Li, J., Wang, H., Kwon, Y. C. & Jewett, M. C. Establishing a high yielding streptomyces-based cell-free protein synthesis system. Biotechnol. Bioeng. 114, 1343–1353 (2017).
Xu, H., Liu, W. Q. & Li, J. Translation related factors improve the productivity of a streptomyces-based cell-free protein synthesis system. ACS Synth. Biol. 9, 1221–1224 (2020).
Ye, J. et al. Primer-BLAST: a tool to design target-specific primers for polymerase chain reaction. BMC Bioinforma. 13, 134 (2012).
Acknowledgements
We thank Ashty Karim and Bastian Vögeli for helpful discussions regarding experiments and figures for this work. In addition, we thank Nigel Mouncey, Yasuo Yoshikuni, Susannah Tringe, and Rex Malmstrom from the U.S. Department of Energy Joint Genome Institute for conversations throughout the development of the project. This work was supported by an Emerging Technologies Opportunity Program (ETOP) award under Subcontract No. 7399340 from the U.S. Department of Energy Joint Genome Institute, a DOE Office of Science User Facility, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. M.C.J. gratefully acknowledges the David and Lucile Packard Foundation and the Camille Dreyfus Teacher–Scholar Program. B.J.R. is supported by a National Defense Science and Engineering Graduate Fellowship (Award ND-CEN-017-095).
Author information
Authors and Affiliations
Contributions
B.J.R. and H.B. performed in vitro experiments and analyzed data. X.Y. collected and analyzed in vivo data. H.S.A. and M.C.J. performed supervisory roles. All authors conceived of experiments and contributed to writing and editing the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Rasor, B.J., Yi, X., Brown, H. et al. An integrated in vivo/in vitro framework to enhance cell-free biosynthesis with metabolically rewired yeast extracts. Nat Commun 12, 5139 (2021). https://doi.org/10.1038/s41467-021-25233-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-021-25233-y
- Springer Nature Limited
This article is cited by
-
Shifting redox reaction equilibria on demand using an orthogonal redox cofactor
Nature Chemical Biology (2024)
-
Crude enzyme immobilization-based cell-free system for efficient N-acetylneuraminic acid biosynthesis aided by N-terminal coding sequence screening
Systems Microbiology and Biomanufacturing (2023)
-
Cell-free prototyping enables implementation of optimized reverse β-oxidation pathways in heterotrophic and autotrophic bacteria
Nature Communications (2022)