Abstract
Thin-film photovoltaics play an important role in the quest for clean renewable energy. Recently, methylammonium lead halide perovskites were identified as promising absorbers for solar cells1. In the three years since, the performance of perovskite-based solar cells has improved rapidly to reach efficiencies as high as 15%1,2,3,4,5,6,7,8,9,10. To date, all high-efficiency perovskite solar cells reported make use of a (mesoscopic) metal oxide, such as Al2O3, TiO2 or ZrO2, which requires a high-temperature sintering process. Here, we show that methylammonium lead iodide perovskite layers, when sandwiched between two thin organic charge-transporting layers, also lead to solar cells with high power-conversion efficiencies (12%). To ensure a high purity, the perovskite layers were prepared by sublimation in a high-vacuum chamber. This simple planar device structure and the room-temperature deposition processes are suitable for many conducting substrates, including plastic and textiles.
Similar content being viewed by others
References
Kojima, A., Teshima, K., Shirai, Y. & Miyasaka, T. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050–6051 (2009).
Kim, H.-S. et al. High efficiency solid-state sensitized solar cell-based on submicrometer rutile TiO2 nanorod and CH3NH3PbI3 perovskite sensitizer. Nano Lett. 13, 2412–2417 (2013).
Heo, J. H. et al. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors. Nature Photon. 7, 486–491 (2013).
Burschka, J. et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499, 316–319 (2013).
Ball, J. M., Lee, M. M., Hey, A. & Snaith, H. J. Low-temperature processed meso-superstructured to thin-film perovskite solar cells. Energy Environ. Sci. 6, 1739–1743 (2013).
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N. & Snaith, H. J. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science 338, 643–647 (2012).
Kim, H-S. et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, 591 (2012).
Etgar, L. et al. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells. J. Am. Chem. Soc. 134, 17396–17399 (2012).
Liu, M., Johnston, M. B. & Snaith, H. J. Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature 501, 395–398 (2013).
Hodes, G. Perovskite-based solar cells. Science 342, 317–318 (2013).
Kagan, C. R., Mitzi, D. B. & Dimitrakopoulos, C. D. Organic–inorganic hybrid materials as semiconducting channels in thin-film field-effect transistors. Science 286, 945–947 (1999).
Tanaka, K. et al. Comparative study on the excitons in lead-halide-based perovskite-type crystals CH3NH3PbBr3 and CH3NH3PbI3 . Solid State Commun. 127, 619–623 (2003).
Snaith, H. J. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells. J. Phys. Chem. Lett. 4, 3623–3630 (2013).
Stranks, S. D. et al. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 342, 341–344 (2013).
Sasabe, H. & Kido, J. Development of high performance OLEDs for general lighting. J. Mater. Chem. C 1, 1699–1707 (2013).
Riede, M., Mueller, T., Tress, W., Schueppel, R. & Leo, K. Small-molecule solar cells—status and perspectives. Nanotechnology 19, 424001 (2008).
Jeng, J-Y. et al. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells. Adv. Mater. 25, 3727–3732 (2013).
Sun, S. et al. The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells. Energy Environ. Sci. http://dx.doi.org/10.1039/C3EE43161D (2014).
Mitzi, D. B. in Progress in Inorganic Chemistry, Vol. 48 (ed. Karin, K.D.) 1–121 (John Wiley, 2007).
Yu, G., Gao, J., Hummelen, J. C., Wudl, F. & Heeger, A. J. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions. Science 270, 1789–1791 (1995).
Malinkiewicz, O., Lenes, M., Brine, H. & Bolink, H. J. Meniscus coated high open-circuit voltage bi-layer solar cells. RSC Adv. 2, 3335–3339 (2012).
Abrusci, A. et al. High-performance perovskite–polymer hybrid solar cells via electronic coupling with fullerene monolayers. Nano Lett. 13, 3124–3128 (2013).
Pawley, G. S. Unit-cell refinement from powder diffraction scans. J. Appl. Cryst. 14, 357–361 (1981).
TOPAS-Academic, Version 4.1, 2007, http://www.topas-academic.net (Coelho Software, Brisbane).
Takahashi, Y. et al. Charge-transport in tin-iodide perovskite CH3NH3SnI3: origin of high conductivity. Dalton Trans. 40, 5563–5568 (2011).
Acknowledgements
We thank A. Soriano-Portillo, J. Ferrando, A. K. Chandiran and E. Ortí for their assistance with the sample preparation and characterization, and careful proofreading of the manuscript. This work was supported by the European Community's Seventh Framework Programme (ORION, Grant 229036 and NANOMATCELL, Grant 308997), the Spanish Ministry of Economy and Competitiveness (MAT2011-24594), the Generalitat Valenciana (Prometeo/2012/053) and the Global Research Laboratory Program, Korea (GLOBASOL, Grant 309194).
Author information
Authors and Affiliations
Contributions
O.M. designed, prepared and characterized the devices, A.Y. and Y.H.L. characterized the devices, G.M.E. supervised the X-ray characterization and interpretation, M.G. supervised the work and wrote the manuscript, M.K.N. initiated the research, provided key materials and wrote the manuscript, H.J.B initiated the research, designed the devices, supervised the work and wrote the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary information
Supplementary information (PDF 592 kb)
Rights and permissions
About this article
Cite this article
Malinkiewicz, O., Yella, A., Lee, Y. et al. Perovskite solar cells employing organic charge-transport layers. Nature Photon 8, 128–132 (2014). https://doi.org/10.1038/nphoton.2013.341
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nphoton.2013.341
- Springer Nature Limited
This article is cited by
-
Recent progress in the development of high-efficiency inverted perovskite solar cells
NPG Asia Materials (2023)
-
Simulation of Planar Heterojunction CH3NH3PbI3 Solar Cell Employing SiGeSn Alloy as a Backplane
Silicon (2023)
-
Synergistic effect of integrating N-functionalized graphene and PEDOT:PSS as hole transporter bilayer for high-performance perovskite solar cells
Advanced Composites and Hybrid Materials (2023)
-
CuInS/ZnS quantum dots-sensitized solar cells by introducing ZnS passivation layer
Journal of Materials Science: Materials in Electronics (2023)
-
Modelling and Simulation of Planar Heterojunction Perovskite Solar Cell featuring CH3NH3PbI3, CH3NH3SnI3, CH3NH3GeI3 Absorber Layers
Silicon (2023)