Skip to main content
Log in

Multi-colour organic light-emitting displays by solution processing

  • Letter
  • Published:

From Nature

View current issue Submit your manuscript

Abstract

Organic light-emitting diodes (OLEDs) show promise for applications as high-quality self-emissive displays for portable devices such as cellular phones and personal organizers1,2,3,4. Although monochrome operation is sufficient for some applications, the extension to multi-colour devices—such as RGB (red, green, blue) matrix displays—could greatly enhance their technological impact. Multi-colour OLEDs have been successfully fabricated by vacuum deposition of small electroluminescent molecules, but solution processing of larger molecules (electroluminescent polymers) would result in a cheaper and simpler manufacturing process. However, it has proved difficult to combine the solution processing approach with the high-resolution patterning techniques required to produce a pixelated display. Recent attempts have focused on the modification of standard printing techniques, such as screen printing5,6,7 and ink jetting8, but those still have technical drawbacks. Here we report a class of electroluminescent polymers that can be patterned in a way similar to standard photoresist materials—soluble polymers with oxetane sidegroups that can be crosslinked photochemically to produce insoluble polymer networks in desired areas. The resolution of the process is sufficient to fabricate pixelated matrix displays. Consecutive deposition of polymers that are luminescent in each of the three RGB colours yielded a device with efficiencies comparable to state-of-the-art OLEDs and even slightly reduced onset voltages.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1
Figure 2: Performance of OLEDs based on crosslinkable polyspiro-derivatives.
Figure 3: Demonstration of the photoresist properties of crosslinkable polyspiro-derivatives.

Similar content being viewed by others

References

  1. Friend, R. H. et al. Electroluminescence in conjugated polymers. Nature 397, 121–128 (1999)

    Article  ADS  CAS  Google Scholar 

  2. Heeger, A. J. Light emission from semiconducting polymers: light-emitting diodes, light-emitting electrochemical cells, lasers and white light for the future. Solid State Commun. 107, 673–679 (1998)

    Article  ADS  CAS  Google Scholar 

  3. Kraft, A., Grimsdale, A. C. & Holmes, A. B. Angew. Chem. Int. Edn 37, 402–428 (1998)

    Article  Google Scholar 

  4. Salbeck, J. Electroluminescence with organic compounds. Ber. Bunsenges. Phys. Chem. 100, 1667–1677 (1996)

    Article  CAS  Google Scholar 

  5. Pardo, D. A., Jabbour, G. E. & Peyghambarian, N. Application of screen printing in the fabrication of organic light-emitting devices. Adv. Mater. 12, 1249–1252 (2000)

    Article  CAS  Google Scholar 

  6. Birnstock, J. et al. Screen-printed passive matrix displays based on light-emitting polymers. Appl. Phys. Lett. 78, 3905–3907 (2001)

    Article  ADS  CAS  Google Scholar 

  7. Birnstock, J. et al. Screen-printed passive matrix displays and multicolor devices. Proc. SPIE 4464, 68–73 (2001)

    Article  ADS  Google Scholar 

  8. Haskal, E. et al. Ink jet printing of passive matrix polymer light-emitting displays. SID Digest Tech. Pap. 33, 776–779 (2002)

    Article  CAS  Google Scholar 

  9. Seong, T. L. et al. A new patterning method for full-colour light-emitting diodes: laser-induced thermal imaging. SID Digest Tech. Pap. 33, 784–787 (2002)

    Article  Google Scholar 

  10. Trattnig, C., Pogantsch, A., Langer, G., Kern, W. & Zojer, E. Polymer-based red, green and blue emitting devices fabricated by reductive photopatterning. Appl. Phys. Lett. 81, 4269–4271 (2002)

    Article  ADS  CAS  Google Scholar 

  11. Müller, D. C. et al. Efficient blue organic light-emitting diodes with graded hole-transport layers. ChemPhysChem 1, 207–211 (2000)

    Article  Google Scholar 

  12. Bayerl, M. S. et al. Cross-linkable hole transport materials—Preparation of multilayer organic light-emitting diodes by spincoating. Macromol. Rapid Commun. 20, 224–227 (1999)

    Article  CAS  Google Scholar 

  13. Li, X. C. et al. A blue light emitting copolymer with charge transporting and photo-crosslinkable functional units. Synth. Met. 84, 437–438 (1997)

    Article  CAS  Google Scholar 

  14. Le Barney, P., Bouche, C. M., Facoetti, H., Soyer, F. & Robin, P. Synthesis of side chain electroluminescent polymers and properties of devices including them. Proc. SPIE 3148, 160–169 (1997)

    Article  ADS  Google Scholar 

  15. Bellmann, E. et al. New triarylamine-containing polymers as hole transport materials in organic light-emitting diodes: effect of polymer structure and crosslinking on device characteristics. Chem. Mater. 10, 1668–1676 (1998)

    Article  CAS  Google Scholar 

  16. Jiang, X., Liu, S., Ma, H. & Jen, A. K. High-performance blue light-emitting diode based on a binaphthyl-containing polyfluorene. Appl. Phys. Lett. 76, 1813–1815 (2000)

    Article  ADS  CAS  Google Scholar 

  17. Bacher, A. et al. Photo-cross-linked triphenylenes as novel insoluble hole transport materials in organic LEDs. Macromolecules 32, 4551–4557 (1999)

    Article  ADS  CAS  Google Scholar 

  18. Li, W. et al. Covalently interlinked organic LED transport layers via spin-coating/siloxane condensation. Adv. Mater. 11, 730–734 (1999)

    Article  CAS  Google Scholar 

  19. Chen, J. P. et al. Efficient, blue light-emitting diodes using cross-linked layers of polymeric arylamine and fluorene. Synth. Met. 107, 129–135 (1999)

    Article  CAS  Google Scholar 

  20. Becker, H., Heun, S., Treacher, K., Büsing, A. & Falcou, A. Materials and inks for full-colour PLED displays. SID Digest Tech. Pap. 33, 780–782 (2002)

    Article  CAS  Google Scholar 

  21. Fouassier, J-P. Photoinitiation, Photopolymerization, and Photocuring: Fundamentals and Applications 102–144 (Hanser/Gardner, Cincinnati, 1995)

    Google Scholar 

  22. Sasaki, H. & Crivello, J. V. The synthesis, characterization, and photoinitiated cationic polymerization of difunctional oxetanes. J. Macromol. Sci. A 29, 915–930 (1992)

    Article  Google Scholar 

  23. Penczek, S. & Kubisa, P. in Comprehensive Polymer Science (ed. Allen, G.) Vol. III, 751–786 (Pergamon, Oxford, 1989)

    Book  Google Scholar 

  24. Treacher, K. et al. Conjugated polymers containing spirobifluorene units and fluorene units, and the use thereof. German patent application DE 2001-10114477; WO 2002-077060.

Download references

Acknowledgements

Partial financial support was granted by the Deutsche Forschungsgemeinschaft, the Bundesministerium für Bildung und Forschung, the Fonds der Chemischen Industrie (Kekule grant for N.R.), and the Bavarian government through ‘Neue Werkstoffe’.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Klaus Meerholz.

Ethics declarations

Competing interests

The authors declare that they have no competing financial interests.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Müller, C., Falcou, A., Reckefuss, N. et al. Multi-colour organic light-emitting displays by solution processing. Nature 421, 829–833 (2003). https://doi.org/10.1038/nature01390

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nature01390

  • Springer Nature Limited

This article is cited by

Navigation