Abstract
Leg dynamics are often ignored in the real-time control of walking robots because of the high gearing used in leg transmissions. However, the use of a gear reduction high enough to discount Coriolis and centripetal components yields additional non-desired dynamics, which are friction, backlash and elasticity. In such cases, simplifying robot dynamics without considering the effect of gear dynamics leads to unavoidable errors. In order to make dynamic equations reflect the reality of the physical system, it is of paramount importance to model the most significant effects acting on the system. Robot dynamics could then be analyzed and related to trajectory parameters for motion-control purposes. In this paper, a method to derive the dynamics of a robot leg as a function of leg-trajectory parameters is proposed. The method experimentally finds the simplified equations of motion that reflect the reality of the physical system. The resulting model is an accurate and simple representation of the system dynamics, taking into account the most relevant dynamics affecting the system. The simplification of the model allows it to be used in a real-time dynamic-control system.
Similar content being viewed by others
References
Armstrong, B.: On finding excitation trajectories for identification experiments involving systems with nonlinear dynamics, Internat. J. Robotic Res. 8(6) (1989), 28–48.
Bennani, M. and Giri, F.: Dynamic modelling of a four-legged robot, J. Intelligent Robotic Systems 17 (1996), 419–428.
Craig, J. J.: Introduction to Robotics, 2nd edn, Addison-Wesley, Reading, MA, 1989.
Dettman, J.: Mathematical Methods in Physics and Engineering, Dover, New York, 1988.
Fu, K. S., Gonzalez, R. C., and Lee, C. S. G.: Robotics, McGraw-Hill, 1987.
Garcia, E. and Gonzalez de Santos, P.: Using soft computing techniques for improving foot trajectories in walking machines, J. Robotic Systems 18(7) (2001), 343–356.
Garcia, E., Gonzalez de Santos, P., and Canudas de Wit, C. Velocity dependence in the cyclic friction arising with gears, Internat. J. Robotic Res. 21(9) (2002), 761–771.
Lamit, L. G.: Pro/ENGINEER 2000i2, BROOKS/COLE, Thomson Learning, 2001.
Manko, D.: A General Model of Legged Locomotion on Natural Terrain, Kluwer Academic Publishers, Dordrecht, 1992.
Mayeda, H., Osuka, K., and Kangawa, A.: A new identification method for serial manipulator arms, in: IFAC 9th World Congress, Budapest, 1984, Vol. 6, pp. 74–79.
Monagan, M., Geddes, K., Labahn, G., and Vorkoetter, S.: MapleV Programming Guide, Maple Waterloo Software, 1998.
Ogata, K.: Modern Control Engineering, 3rd edn, Prentice-Hall, Englewood Cliffs, NJ, 1996.
Pfeiffer, F. and Rossmann, T.: About friction in walking machines, in: Proc. of IEEE Internat. Conf. on Robotics and Automation, San Francisco, CA, 2000, pp. 2165–2172.
Pfeiffer, F. and Weidemann, H. J.: Dynamics of the walking stick insect, IEEE Control Systems Mag. 11(2) (1991), 9–13.
Sciavicco, L. and Siciliano, B.: Modelling and Control of Robot Manipulators, 2nd edn, Springer, London, 2000.
Shing, T. K.: Dynamics and control of geared servomechanisms with backlash and friction consideration, PhD Thesis, The University of Maryland, 1994.
Spong, M. W.: Modeling and control of elastic joint robots, ASME J. Dyn. Systems Measm. Control 109 (1987), 310–319.
Swevers, J., Ganseman, C., Chenut, X., and Samin, J.: Experimental identification of robot dynamics for control, in: Proc. of IEEE Internat. Conf. on Robotics and Automation, San Francisco, CA, 2000, pp. 241–246.
Zhou, D., Low, K., and Zielinska, T.: A stability analysis of walking robots based on leg-end supporting moments, in: Proc. of IEEE Internat. Conf. on Robotics and Automation, San Francisco, CA, 2000, pp. 2834–2839.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Garcia, E., Galvez, J.A. & Gonzalez de Santos, P. On Finding the Relevant Dynamics for Model-Based Controlling Walking Robots. Journal of Intelligent and Robotic Systems 37, 375–398 (2003). https://doi.org/10.1023/A:1026104815610
Issue Date:
DOI: https://doi.org/10.1023/A:1026104815610