Abstract
A double-stage mode of accelerated controlled hardening of large forgings from structural steels with relatively low hardenability in a water-air mixture with subsequent high-temperature tempering is described. Special features of the decomposition of supercooled austenite in these steels under continuous cooling are considered. The structure and properties of forgings after hardening by the recommended regime are studied.
Similar content being viewed by others
REFERENCES
V. Lyuty, Hardening Media, A Handbook [in Russian], Metallurgiya, Chelyabinsk (1990).
I. A. Borisov and L.F. Golland, “Cooling of large forgings in water-air mixture,” Metalloved. Term. Obrab. Met., No. 10, 17-22 (1988).
D. V. Budrin and V. M. Kondratov, "Water-air cooling in hardening," Metalloved. Term. Obrab. Met., No. 6, 22–25 (1965).
N. A. Nemzer, G. G. Nemzer, and A. G. Kovalev, "Normalization of castings in the chamber for water-air cooling," Metalloved. Term. Obrab. Met., No. 11, 2–4 (1994).
Yu. G. Éismondt, A. V. Shustov, E. V. Pil'shchikov, et al., "Preparation and use of liquid-air hardening media," Metalloved. Term. Obrab. Met., No. 11, 43–45 (1980).
Yu. G. Éismondt, "A study of cooling media alternative to hardening oils," Metalloved. Term. Obrab. Met., No. 11, 32–36 (2000).
A. A. Bulavko, M. A. Geller, and M. S. Zheludkevich, "A system of controlled cooling for heat treatment of complex-configuration parts," Metalloved. Term. Obrab. Met., No. 4, 31–33 (1991).
Yu. G. Éismondt and A. V. Shustov, "A computational-experimental method for designing rational cooling modes in heat treatment," Metalloved. Term. Obrab. Met., No. 11, 6–9 (1983).
G. G. Trayanov, Yu. V. Yudin, V. V. Odinokikh, et al., A dispensing header for gas-liquid mixture, RF Patent No. 2164246, MKI C 21 D 1_667, 20.03.2001 [in Russian].
N. P. Morozov, Yu. V. Yudin, N. A. Adamova, et al., "Simulation of structural transformations of austenite in continuous cooling of structural steels," in: Metal Science and Heat Treatment, Coll. Works [in Russian], Izd-vo UPI, Sverdlovsk (1985), pp. 33–36.
N. V. Vlasova, N. A. Adamova, Yu. V. Yudin, et al., "Determination of the stress-strain state of large rolls in the process of their heat treatment," in: Advanced Methods of Surface and Volume Hardening of Critical Machine Parts [in Russian], TSNIITÉItyazhmash, Moscow (1983), pp. 13–16.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pyshmintsev, I.Y., Éismondt, Y.G., Yudin, Y.V. et al. Hardening of Large Forgings in Water-Air Mixture. Metal Science and Heat Treatment 45, 103–108 (2003). https://doi.org/10.1023/A:1024515504547
Issue Date:
DOI: https://doi.org/10.1023/A:1024515504547