Abstract
A straightforward method for determining the stress intensity factor of a single edge-notched tensile specimen with unknown end conditions is presented. It involves the use of measured crack mouth opening displacements, coupled with existing solutions for stress intensity factors and crack opening displacements for uniform tensile loading and for pure bending. The use of the method is demonstrated through experiments on a porous matrix ceramic composite.
Similar content being viewed by others
References
Blatt, D., John, R., Coker, D., 1994. Stress Intensity Factor and Compliance Solutions for a Single Edge Notched Specimen with Clamped Ends.Engineering Fracture Mechanics, 47, 521–532.
John, R., Kaldon, S.G., Johnson, D.A. and Coker, D., 1995. Weight Function for a Single Edge Cracked Geometry with Clamped Ends.International Journal of Fracture, 72, 145–158.
John, R. and Rigling, B., 1998. Effect of Height to Width Ratio on K and CMOD Solutions for a Single Edge Cracked Geometry with Clamped Ends.Engineering Fracture Mechanics, 60, 147–156.
Marchand, N., Parks, D.M., and Pelloux, R.M., 1986. Kt Solutions for Single Edge Notch Specimens under Fixed End Displacements.International Journal of Fracture, 31, 53–65.
Mattoni, M.A., Yang, J.Y., Levi, C.G., and Zok, F.W., 2001. Effects of Matrix Porosity on the Mechanical Properties of a Porous-Matrix All-Oxide Ceramic Composite.Journal of the American Ceramic Society, 84, 2594–2602.
Tada, H., Paris, P.C., and Irwin, G.R., 1985. The Stress Analysis of Cracks Handbook. Del Research Corporation, St. Louis, MO.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mattoni, M.A., Zok, F.W. A method for determining the stress intensity factor of a single edge-notched tensile specimen. Int J Fract 119, L3–L8 (2003). https://doi.org/10.1023/A:1023989612347
Issue Date:
DOI: https://doi.org/10.1023/A:1023989612347