Abstract
This paper describes a laser ultrasonic probe capable of generating ultrasound by both thermoelastic expansion and material ablation mechanisms simultaneously. Because bulk wave propagation is centered around a 67° line of sight for thermoelastically generated signals, and near normal (0°) for signals generated by means of ablation, the simultaneous generation by both mechanisms results in a wider range of useful observation angles. The system described uses a Nd:Yag laser with fiber optic delivery and a focusing objective, with an independent receiver, such as an EMAT, interferometer or contact transducer. The optical fiber delivery system allows the probe to be easily positioned (i.e. using a robot), and has the added benefit of allowing a single laser to service several test sites. The focusing objective provides the means for generating ultrasound by either thermoelastic expansion or ablation, or a combination of the two mechanism. The objective also serves to protect the fiber from ablated material and manufacturing contaminants (dust, welding gas, etc.). The resulting system is both physically robust and highly adaptable for a wide range of industrial ultrasonic inspection applications.
Similar content being viewed by others
REFERENCES
White, R. M. (1963). “Generation of Elastic Waves by Transient Surface Heating,” Journal of Applied Physics 34, pp. 3559–3567.
Primbsch, E. and Bickel, W. (1983). “Apparatus for Producing Ultrasonic Waves in a Workpiece,” U.S. Patent 4,379,409.
Vogel, J. A., Bruinsma, J. A., and Berkhout, A. J. (1987). “Beamsteering of Laser Generated Ultrasound,” Proceedings of Ultrasonics International. Butterworth, Washington, D. C., pp. 141–152.
Jarzynski, J. and Berthelot, Y. H. (1989). “The Use of Optical Fibers to Enhance the Laser Generation of Ultrasonic Waves,” J. Acoustical. Soc. Am. 85(1), 158–162.
Yang, J., DeRidder, N., Ume, C., and Jarzyniski, J., (1993), “Noncontact Optical Fiber Phased Array Generation of Ultrasound for Nondestructive Evaluation of Materials and Processes,” Ultrasonics 31(6), 387–394.
Yang, J. and Ume, C., (1994), “Performance Evaluation of Fiber Array for NDE Application,” Research in Nondestructive Evaluation 5(3), 175–190.
Burger, C. P., Schumacher, N. A., Duffer, C. E. and Knab, T. D. (1993). “Fiber-Optic Techniques for Generating and Detecting Ultrasonic Waves for Quantitative NDE,” Optics and Lasers in Engineering 19, 121–140.
Graham, G. M., Ume, C., and Hopko, S. N. “Laser Ultrasonic Sensing of Penetration Depth in Robotic Welding: Simulated Liquid Welds,” Journal of Manufacturing Science and Engineering.
Hand, D. P., Naeem, M., and Jones, J. D. (1996). “Fiber Optic High-quality ND:Yag Beam Delivery for Materials Processing,” Optical Engineering 35(2), 502–506.
Verboven, P. (1994). “Pulsed Kilowatt Nd:Yag Laser with Fiber Optic Delevery,” SPIE 2206, 416–425.
Ready, J. F. (1971). Effects of High-Power Laser Radiation. Chapter 3. Academic Press.
Scruby, C. B. and Drain, L. E. (1990). Laser Ultrasonics: Techniques and Applications, Adam Hilger, New York.
Hutchins, D. A., Dewhurst, R. J., and Palmer, S. B. (1981). “Directivity Patterns of Laser-Generated Ultrasound in Aluminum,” J. Acoustical Society of America 70(5), Nov. 1362–1369.
Zolotov, S. I., Krylov, V. V., Ponomarev, E. P. and Shtentsel, T. V. (1985). “Beam Patterns of a Thermooptical Source of Acoustic Waves Excited by a Narrow Laser Beam in Metals,” Sov. Phys. Acoust. 31(4), Jul–Aug. 344–345.
Hutchins, D. A. (1988). “Ultrasonic Generation by Pulsed Lasers,” Physical Acoustics, Vol. XVIII, pp. 21–123.
Umeaqukwu, C., DeRidder, N., Yang, J., and Jarzynski, J. (1991). “Study of the Directivity Patterns of Laser-Optical Fiber Generated Ultrasound,” invited paper, 121st Meeting of the JASA, Vol. 89,No. 4, Pt. 2, Baltimore, MD Apr. 1991.
Dewhurst, R. J., Hutchins, D. A., Palmer, S. B., and Scruby, C. B., (1982). “Quantitative Measurements of Laser-generated Acoustic Waves,” Journal of Applied Physics 53, 4064–4071.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hopko, S.N., Ume, I.C. Laser Ultrasonics: Simultaneous Generation by Means of Thermoelastic Expansion and Material Ablation. Journal of Nondestructive Evaluation 18, 91–98 (1999). https://doi.org/10.1023/A:1021856526734
Issue Date:
DOI: https://doi.org/10.1023/A:1021856526734