^99mTc generator with hydrated MnO₂ as adsorbent of ⁹⁹Mo

Abstract

An ^99mTc generator with MnO₂ as adsorbent of ⁹⁹Mo was investigated. Through batch experiments the retention of ⁹⁹Mo onto MnO₂was studied as a function of the shaking time and the pH value of the ⁹⁹Mo solution. It was found that ⁹⁹Mo showed a retention of 100% onto MnO₂ at the pH range from 3 to 11, and the equilibrium distribution was reached in less than 10 minutes. In column experiments the retention of ⁹⁹Mo onto MnO₂ was also high: 99.72%. In this case, the pH of the utilized ⁹⁹Mo solution was 5. The ^99mTc could be eluted from the MnO₂-⁹⁹Mo column by using either distilled water with a pH of 5 or an aqueous solution of 0.9% NaCl. With the saline solution, the ^99mTc elution yields were higher than 80%, and only one aliquot of 5 ml was needed to get these yields. The best results were obtained when the column was packed with 1 g of MnO₂. The water and the saline solution were passed through the column at a rate of 1.25 ml/min.