Abstract
New polyamide 6 (PA)/poly(amino-ether) (Blox) blends were obtained by direct injection moulding covering the full composition range. The blends comprised an almost pure PA phase and a Blox-rich phase in which significant amounts of PA were miscibilized. A very positive mechanical response was obtained, as synergisms were observed both in Young's modulus/yield stress and in elongation at break. The combined effects of the observed partial miscibility, and the very small dispersed phase size, are stated as the main factors responsible for the mechanical behaviour.
Similar content being viewed by others
References
A. ARZAK, J. I. EGUIAZABAL and J. NAZABAL, J. Appl. Polym. Sci. 58 (1995) 653.
D. W. BARTLETT, J. W. BARLOW and D. R. PAUL, ibid. 27 (1982) 2351.
J. I. EGUIAZABAL and J. NAZABAL, Plast. Rubb. Process. Appl. 14 (1990) 211.
N. YAMAGUCHI, S. AKIYAMA and M. TOKOH, Kobunshi Robunshu 53 (1996) 842.
Y. KAYANO, H. KESKKULA and D. R. PAUL, Polymer 38 (1997) 1885.
A. J. OSHINSKI, H. KESKKULA and D. R. PAUL, Ibid. 37 (1996) 4891.
J. D. LEE and S. M. YANG, Polym. Eng. Sci. 35 (1995) 1821.
R. ARMAT and A. MOET, Polymer 34 (1993) 977.
S. HORIUCHI, N. MATCHARIVAKUL, K. YASE, T. KITANO, H. K. CHOI and V. M. LEE, ibid. 38 (1997) 59.
T. O. AHN, S. C. HONG, H. M. JEONG and J. H. KIM, ibid. 38 (1997) 207.
E. GATTIGLIA, A. TURTURRO, F. P. LA MANTIA and A. VALENZA, J. Appl. Polym. Sci. 46 (1992) 1887.
E. GATTIGLIA, A. TURTURRO, E. PEDEMONTE and G. DONDERO, ibid. 41 (1990) 1411.
F. P. LA MANTIA, M. PACI and P. L. MAGAGNINI, Rheol. Acta 36 (1997) 152.
Y. SEO, J. Appl. Polym. Sci. 64 (1997) 359.
J. M. MARTINEZ, J. I. EGUIAZABAL and J. NAZABAL, J. Macromol. Sci-Phys. B 30 (1991) 345.
L. M. ROBESON and A. B. FURTEK, J. Appl. Polym. Sci. 23 (1979) 645.
G. DEFIEUW, G. GROENINCKX and H. REYNAERS, Polymer 30 (1989) 2164.
M. IRIARTE, E. ESPI, A. ETXEBARRIA, M. VALERO, M. J. FERNANDEZ and J. J. IRUIN, Macromolecules 24 (1991) 5546.
M. VANESTE and G. GROENINCKX, Polymer 35 (1994) 162.
R. ERRO, M. GAZTELUMENDI and J. NAZABAL, J. Appl. Polym. Sci. 74 (1999) 1539.
Idem., ibid. 77 (2000) 2978.
G. GUERRICA-ECHEVARRIA, J. I. EGUIAZABAL and J. NAZABAL, ibid. 72 (1999) 1113.
R. ERRO, M. GAZTELUMENDI and J. NAZABAL, ibid. 45 (1992) 339.
C. B. BUCKNALL in “Toughened Plastics” (Applied Science Publishers, London, 1977).
T. G. FOX, Bull. Amer. Phys. Soc. 1 (1956) 123.
M. J. FERNANDEZ, M. VALERO, A. MARTINEZ DE ILARDUYA, E. ESPI and J. J. IRUIN, Polymer 34 (1993) 38.
R. ERRO, M. GAZTELUMENDI and J. NAZABAL, J. Polym. Sci., Polym. Phys. Ed. 34 (1996) 1055.
J. I. EGUIAZABAL and J. J. IRUIN, Mater. Chem. Phys. 18 (1987) 147.
A. ARZAK, J. I. EGUIAZABAL and J. NAZABAL, J. Appl. Polym. Sci. 65 (1997) 1503.
S. BASTIDA, J. I. EGUIAZABAL and J. NAZABAL, Polymer 37 (1996) 2317.
J. R. FRIED, W. J. MACKNIGHT and F. E. KARASZ, J. Appl. Polym. Sci. 50 (1979) 6052.
L. W. KLEINER, F. E. KARASZ and W. J. MACKNIGHT, Polym. Eng. Sci. 19 (1979) 519.
L. E. NIELSEN, in “Predicting the Properties of Mixtures” (Marcel Dekker, New York, 1978).
A. ARZAK, J. I. EGUIAZABAL and J. NAZABAL, Macromol. Chem. Phys. 198 (1997) 1829.
D. W. VAN KREVELEN, in “Properties of Polymers” (Elsevier, Amsterdam, 1976).
L. A. UTRACKI, in “Two-Phase Polymer Systems” (Hanser Publishers, New York, 1991).
K. KOO, T. INOUE and K. MIYASAHA, Polym. Eng. Sci. 25 (1985) 741.
T. D. FORNES, P. J. YOON, H. KESKKULA and D. R. PAUL, Polymer 42 (2001) 9929.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Guerrica-echevarría, G., Eguiazábal, J.I. & Nazábal, J. Synergistic mechanical behaviour in new polyamide 6/poly(amino-ether) blends. Journal of Materials Science 37, 4529–4535 (2002). https://doi.org/10.1023/A:1020619525889
Issue Date:
DOI: https://doi.org/10.1023/A:1020619525889