Abstract
The solid particle erosion behaviour of polymers and polymeric composites has been reviewed. Attention was paid to the effects of testing variables (e.g., erodent type, size and flux, impact angle) and target material characteristics (e.g., crystallinity, crosslink density, reinforcement content and arrangement). The occurring failure mechanisms were classified and discussed. Various predictions and models proposed to describe the erosion rate (ER) were listed and their suitability was checked. Recommendations were given how to solve some open questions related to the structure—erosion resistance relationships for polymers and polymeric composites.
Similar content being viewed by others
References
VDI 3822, Schadensanalyse, Schäden durch tribologische Beansprucuhungen, in ”VDI-Handbuch Werkstofftechnik, Konstruktion, Betriebstechnik Teil 4” (VDI-Verlag, Düsseldorf, 1989) Blatt 5.2.
I. Finnie, Wear 186/187 (1995) 1.
H. C. Meng and K. C. Ludema, ibid. 181–183 (1995) 443.
T.-H. Tsiang, Journal of Composite Technology and Research 8(4) (1986) 154.
G. P. Tilly, Wear 14 (1969) 63.
K. V. Pool, C. K. H. Dharan and I. Finnie, ibid. 107 (1986) 1.
C. E. Smeltzer, M. E. Gulden and W. A. Compton, Journal of Basic Engineering 19 (1970) 639.
H. Czichos and K.-H. Habig, in “Tribologie-Handbuch: Reibung und Verschleiß, Systemanalyse, Prüftechnik, Werkstoffe und Konstruktionselement” (Friedr. Vieweg & Sohn Verlaggesellschaft GmbH, Wiesbaden, 1992) p. 128.
RAO P. Veerabhadra and D. H. Buckley, ASLE Transactions 29(3) (1985) 283.
D. R. Andrews, J.Phys.: Appl.Phys. 14 (1981) 1979.
J. G. A. Bitter, Wear 6 (1963) 169.
G. W. Stachowiak and A. W. Batchelor, in “Engineering Tribology Tribology Series 24” (Elsevier, Amsterdam, 1993) p. 586.
K. Friedrich, J.Mater.Sci. 21(3) (1986) 3317.
J. K. Lancaster, Wear 141 (1990) 159.
I. M. Hutchings, J.Phys.D: Appl.Phys. 25 (1992) A212.
J. C. Arnold and I. M. Hutchings, Wear 138 (1990) 33.
A. BrandstÄDTER, K. C. Goretta, J. L. Routbort, D. P. Groppi and K. R. Karasek, ibid. 147 (1991) 155.
K.-J. Groß, Dissertation, Universit¨at Stuttgart, 1988, p. 3.
A. I. Marei and P. V. Izvozchikov, in “Abrasion of Rubber” (MacLaren, London, 1967) p. 274.
J. C. Arnold and I. M. Hutchings, J.Mater.Sci. 248 (1989) 833.
Idem., J.Phys.D: Appl.Phys. 25 (1992) A222.
M. Roy, B. Vishvanathan and G. Sundararajan, Wear 171 (1994) 149.
G. P. Tilly and W. Sage, ibid. 16 (1970) 447.
M. M. Stack and N. Pungwiwat, Materials Science and Technology 15 (1999) 337.
A. M. Latifi, in Master of Science thesis, Wichita State University, 1987.
J. Karger-KOCSIS and J. Gremmels, Journal of Applied Polymer Science 78 (2000) 1139.
N.-M. Barkoula, in “Solid Particle Erosion Behaviour of Polymers and Polymeric Composites” (IVW-Schriftreihe 29, Kaiserslautern, (2002).
P. H. Shipway and I. M. Hutchings, Wear 174 (1994) 169.
K. Anand, S. K. Hovis, H. Conrad and R. O. Scattergood, ibid. 118 (1987) 243.
R. A. Doyle and A. Ball, ibid. 151 (1991) 87.
S. M. Walley and J. E. Field, Philosophical Transactions of the Royal Society of London A 321 (1987) 277.
S. M. Walley, J. E. Field and M. Greengrass, Wear 114 (1998) 59.
H. BÖHM, S. Betz and A. Ball, Tribology International(1990) 399.
RAO P. Veerabhadra and D. H. Buckley, ASLE Transactions 27(4) (1983) 373.
C. M. Thai, K. Tsuda and H. Hojo, Journal of Testing and Evaluation 9(6) (1981) 359.
Y. Q. Wang, L. P. Huang, W. L. Liu and J. Li, Wear 218 (1998) 128.
J. I. Mardel, K. R. Chynoweth and A. J. Hill, Materials Forum 19 (1995) 117.
I. M. Hutchings, D. W. T. Deuchar and A. H. Muhr, J Mater.Sci. 22 (1987) 4071.
J. Li and I. M. Hutchings, Wear 135 (1990) 293.
J. C. Arnold and I. M. Hutchings, ibid. 161 (1993) 213.
P. J. Slikkerveer, M. H. A. Van Dongen and F. J. Touwslager, ibid. 236 (1999) 189.
J. C. Arnold and I. M. Hutchings, Journal of Natural Rubber Research 6(4) (1991) 241.
J. Zahavi and G. F. Schmitt, Wear 71 (1981) 179.
S. Roy and A. Kumar, Polymer Engineering and Science 35(12) (1995) 1046.
A. N. Trofimovich, V. N. Anisimov, V. N. Kurachenkov, V. V. Strakhov, M. P. Letunovskii and S. F. Egorov, Trenie i Iznos 8(3) (1987) 493.
J. I. Mardel, A. J. Hill and K. R. Chynoweth, Materials Forum 16 (1992) 155.
R. D. Deanin and L. B. Patel, in “Advances in Polymer Friction and Wear, ” edited by L. H. Lee (Plenum, New York, 1974) p. 569.
R. M. Rose, W. R. Cimino, E. Ellis and A. N. Crugnola, Wear 77 (1982) 89.
R. A. Beck and R. W. Truss, ibid. 218 (1998) 145.
K. Cho and D. Lee, Polymer 41 (2000) 133.
J. I. Mardel, A. J. Hill, K. R. Chynoweth, M. E. Smith, C. H. J. Johnson and T. J. Bastow, Wear 162–164 (1993) 645.
J. I. Mardel, K. R. Chynoweth, M. E. Smith, C. H. J. Johnson, T. J. Bastow and A. J. Hill, Materials Science Forum 189/190 (1995) 173.
B. J. Briscoe, P. D. Evans, E. Pelillo and S. K Sinha, Wear 200 (1996) 137.
Y. I. Oka, M. Matsumura and T. Kawabata, ibid. 162–167 (1993) 688.
A. BrandstÄDTER, K. C. Goretta, J. L. Routbort, D. P. Groppi and K. R. Karasek, ibid. 147 (1991) 155.
B. Briscoe, Wear Materials 3 (1981) 7.
S. B. Ratner and E. E. Styller, Wear 73 (1981) 213.
S. W. Zhang, W. Deguo and Y. Weihua, J.Mater.Sci. 30 (1995) 4561.
G. Sundararajan, M. Roy and B. Venkataraman, Wear 140 (1990) 369.
B. Lamy, Tribology International 1 (1984) 35.
S. M. Wiederhorn and B. J. Hockey, J.Mater.Sci. 18 (1983) 766.
K. Friedrich, in “Friction and Wear of Polymer Composites” (Elsevier, Amsterdam, 1986) p. 233.
S. N. Ratner, I. I. Farberoua, O. V. Radyukeuich and E. G. Lure, in “Abrasion of Rubber, ” edited by D. I. James (MacLaren, London, 1967) p. 145.
T. H. Tsiang, in “Test Methods for Design Allowables for Fibrous Composites, ” edited by C. C. Chamis (ASTM STP 1003, American Society for Testing and Materials Philadelphia, 1989) p. 55.
N.-M. Barkoula and J. Karger-Kocsis, Journal of Reinforced Plastics & Composites, in press.
N.-M. Barkoula, G. C. Papanicolaou and J. Karger-KOCSIS, Composites Science and Technology 62(1) (2002) 121.
A. HÄGER, K. Friedrich, Y. Dzenis and S. A. Paipetis, in 10th International Conference on Composite Materials “ICCM-10” Proceedings, Canada 1995, edited by B. C. Whistler (Woodhead Publishing Ltd, Cambridge, 1995) p. 155.
N.-M. Barkoula and J. Karger-KOCSIS, Wear 252 (2002) 80.
N. Miyazaki and T. Hamao, Journal of Composite Materials 30 (1996) 35.
E. Moos and J. Karger-KOCSIS, Advanced Composite Letters 8(2) (1999) 59.
T. D. Karimbaev, Y. A. Nozhnitskii, V. I. Gundarov, L. S. Rysin, V. G. Lyuttsai and I. A. Tarasov, Mechanics of Composite Materials 2 (1980) 235.
Y. A. Ballout, S. K. Hovis and J. E. Talia, Scripta Metallurgica et Materialia 24 (1990) 195.
D.-S. Kim, M. Kubouchi and K. Tsuda, Advanced Composite Letters 6(5) (1997) 123.
N. Haraki, K. Tsuda and H. Hojo, ibid. 1(1) (1992) 31.
C. Lhymn and Y. O. Lhymn, SAMPE (1989) 720.
M. M. Khruschov, Wear 28 (1974) 69.
K.-H. Zum Gahr in “Microstructure and Wear of Materials, Tribology Series 10” (Elsevier, Amsterdam, 1987) p. 313.
B. K. Yen and C. K. H. Dharan, Wear 195 (1996) 123.
S. K. Hovis, J. E. Talia and R. O. Scattergod, ibid. 108 (1986) 139.
N. Miyazaki and N. Takeda, Journal of Composite Materials 27(1) (1993) 21.
G. Besztercey, J. Karger-KOCSIS and P. Szaplonczay, Polymer Bulletin 42 (1999) 717.
N.-M. Barkoula, J. Karger-KOCSIS and G. C. Papanicolaou, Journal of Composite Materials 36(14) (2002) 1745.
K. Velten, R. Reinicke and K. Friedrich, Tribology International 33 (2000) 731.
Z. Zhang, K. Friedrich and K. Velten, Wear 252 (7–8) (2002) 668.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Barkoula, NM., Karger-Kocsis, J. Review Processes and influencing parameters of the solid particle erosion of polymers and their composites. Journal of Materials Science 37, 3807–3820 (2002). https://doi.org/10.1023/A:1019633515481
Issue Date:
DOI: https://doi.org/10.1023/A:1019633515481