Abstract
Selective oxidation of hydrogen sulfide to sulfur was carried out over V2O5 and V−Sb−O mixed−oxide catalysts supported on TiO2, ZrO2 and \(\gamma\)−Al2O3. TiO2−supported catalysts exhibited the highest sulfur yield and the highest areal rate. Catalyst reducibility was studied by temperature−programmed reduction.
Similar content being viewed by others
References
M. Capone, in: Encyclopedia of Chemical Technology, Vol. 23, eds. J.K. Kroschwitz and M. Howe-Grant (Wiley, New York, 1997) pp. 432–450.
J.A. Lagas, J. Borsboom and P.H. Berben, Oil Gas J. 86 (1988) 68.
K.T. Li, M.Y. Huang and W.D. Cheng, Ind. Eng. Chem. Res. 35 (1996) 621.
K.T. Li and N.S. Shyu, Ind. Eng. Chem. Res. 36 (1997) 1480.
J. Haber, Pure Appl. Chem. 56 (1983) 1663.
G.C. Bond, S. Flamerz and R. Shukri, Faraday Discuss. Chem. Soc. 87 (1989) 65.
A. Vejux and P. Courtine, J. Solid State Chem. 23 (1978) 93.
G.C. Bond and S.F. Tahir, Appl. Catal. 71 (1991) 1.
G.C. Bond, Appl. Catal. 157 (1997) 91.
S. Albrecht, G. Wendt, G. Lippold, A. Adamski and K. Dyrek, Solid State Ionics 101 (1997) 909.
T. Blasco, A. Galli, J.M. Lopez Nieto and F. Trifirò, J. Catal. 203 (1997) 169.
S. Breiter, M. Estenfelder, H.-G. Lintz, A. Tenten and H. Hibst, Appl. Catal. 134 (1996) 81.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Li, K., Chien, T. Effect of supports in hydrogen sulfide oxidation on vanadium−based catalysts. Catalysis Letters 57, 77–80 (1999). https://doi.org/10.1023/A:1019031128700
Issue Date:
DOI: https://doi.org/10.1023/A:1019031128700