Abstract
The porous structure and features of deformation and failure for especially pure iron powder in the porosity range from 0 to 30% are studied. A uniform reduction in fatigue endurance with an increase in porosity is established. The dependence of ultimate intensity of deformation on porosity is not monotonous in nature with a maximum that is approximately at Π = 13%. The form of the dependence of fatigue properties on porosity is connected with changes in porous structure.
Similar content being viewed by others
References
V. T. Troshchenko and A. Ya. Krasovskii, “Strength of porous iron with repeated-variable loads,” Poroshk. Metall., No. 5, 87-92 (195).
A. S. Drachinskii, A. E. Kushchevskii, A. V. Perepelkin, et al., “Effect of porosity on the crack resistance of powder iron,” Poroshk. Metall., No. 12, 80-84 (1982).
V. N. Antsiferov, S. N. Peshcherenko, A. A. Shatsov, and N. N. Maslennikov, “Effect of pores on the failure of iron,” Probl. Prochn., No. 2, 20-22 (1989).
C. M. Sonsino, “Fatigue design for powder metallurgy,” Met. Powder Report, 5,No.11, 754-764 (1990).
H. Danninger, G. Jangg, B. Weiss, and R. Sticler, “Microstructure and mechanical properties of sintered iron. Part II. Experimental study,” Met. Powder Report, 25,No.4, 170-173 (1993).
G. V. Syrov and V. V. Polyakov, “Method for analyzing the deformation structure of porous materials,” in: New Powder Materials and Technology [in Russian], Altai State Univ., Barnaul (1993).
V. N. Antsiferov, Yu. V. Sokolkin, A. A. Chekalkin, and A. V. Babushkin, “Numerical model for powder material endurance,” Poroshk. Metall., Nos. 5-6, 112-118 (1994).
Yu. V. Sokolkin, A. V. Babushkin and A. A. Chekalkin, “Fatigue endurance of powder iron taking account of microplasticity and statistical porosity,” Vestn. Perm. Gos. Techn. Univ., Mekhankia, No. 2, 75-86 (1995).
A. Kobayashi (ed.), Experimental Mechanics, in 2 vols. [in Russian], Mir, Moscow (1990).
V. N. Antsiferov, S. N. Bobrova, S. A. Oglezneva, et al., Problems of Powder Metallurgy, Part 1 [in Russian], Ekaterinburg (2000).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Antsiferov, V.N. Features of Powder Material Deformation with Cyclic Loading. Powder Metallurgy and Metal Ceramics 40, 569–572 (2001). https://doi.org/10.1023/A:1015227903025
Issue Date:
DOI: https://doi.org/10.1023/A:1015227903025