Abstract
Computer modelling of time dependences of radon release rate during hydration of 3CaO·SiO2 was carried out. It was demonstrated that the emanation thermal analysis (ETA) can be used for the characterisation of morphology changes during hydration of Portland cement clinker minerals. The presence of various additives and increased temperature affecting kinetics of hydration were simulated by the mathematical model of the radon release rate during hydration of 3CaO·SiO2. A good agreement between the mathematical model and ETA experimental results was found.
Similar content being viewed by others
References
V. Balek and J. Tölgyessy, Emanation thermal analysis and other radiometric emanation methods, in: Comprehensive Analytical Chemistry (Ed. G. Svehla) Part XII C, Elsevier 1984, p. 304.
V. Balek, Thermochim. Acta, 192 (1990) 1.
I. N. Beckman and V. Balek, J. Therm. Anal. Cal., 55 (1999) 123.
V. Balek and J. Dohnálek, J. Mat. Sci., 17 (1982) 281.
V. Balek and J. Dohnálek, Cem. Concr. Res., 13 (1983) 1.
V. Balek and J. Dohnálek, Cem. Concr. Res., 22 (1992) 459.
V. Balek and J. Kříž., Thermochim. Acta, 121 (1987) 241.
J. M. Pommersheim and J. R. Clifton, Cem. Concr. Res., 9 (1979) 765.
V. Balek, J. Kříž. and J. Dohnálek, Proc. 8th International Congress on the Chemistry of Cement Rio de Janeiro, Brasil 1986, Vol. 3, p. 40.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Balek, V., Beckman, I.N. Theory of Emanation Thermal Analysis: X. Characterization of morphology changes during hydration of cementitious binders. Journal of Thermal Analysis and Calorimetry 67, 37–47 (2002). https://doi.org/10.1023/A:1013787618469
Issue Date:
DOI: https://doi.org/10.1023/A:1013787618469