Abstract
Discontinuous gaits for walking machines present some advantages over wave gaits such as better stability margins and greater speed for small duty factors, for instance. The problem is that a machine using discontinuous gaits starts and stops its body motion several times per locomotion cycle. This means that high accelerations appear, therefore the theoretical static stability margin can be inadequate for measuring stability. This paper addresses how dynamic effects modify the measurement of the static stability of a discontinuous gait and determines the acceleration under which the criterion of using the static stability margin for measuring the stability is valid. For this study, a dynamic planar model of a four-legged walking machine was derived. Then, both the longitudinal and dynamic stability margins were computed and compared. Final results show that the static stability margin is an adequate measurement for studying stability in massless leg machines with the constraint that the acceleration of the body be smaller than the inversion acceleration. When the mass of the legs is significant, stability is determined by the dynamics of the legs and the distribution of the mass of the legs as well.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Bennani, M. and Giri, F.: Dynamic modelling of a four-legged robot, J. Intelligent Robotic Systems 17 (1996), 419–428.
Gonzalez de Santos, P. and Jimenez, M. A.: Generation of discontinuous gaits for quadruped walking machines, J. Robotic Systems 12(9) (1995), 599–611.
Gonzalez de Santos, P. and Jimenez, M. A.: Path tracking with quadruped walking machines using discontinuous gaits, Comput. Electronic Engrg. 21(6) (1996), 383–396.
Hirose, S. and Umetani, Y.: Some consideration on a feasible walking mechanism as a terrain vehicle, in: Proc. 3rd CISM-IFTOMM Symp. on Theory and Practice of Robots and Manipulators, Amsterdam, Elsevier, 1978, pp. 357–375.
Jimenez, M. A., Gonzalez de Santos, P., and Armada, M. A.: A four-legged walking test bed, in: 1st IFAC Internat. Workshop on Intelligent Autonomous Vehicles, Hampshire, U.K., April 1993, pp. 8–13.
Klein, C. A. and Chung, T. S.: Force interaction and allocation for the legs of a walking vehicle, IEEE J. Robotics Automat. RA-3(6) (1987), 546–555.
Lin, B. S. and Song, S.M.: Dynamic modeling, stability and energy efficiency of a quadrupedal walking machine, in: IEEE Internat. Conf. on Robotics and Automation, Atlanta, GA, May 2–6, 1993, Vol. 3, pp. 367–373.
McGhee, R. B. and Frank, A. A.: On the stability properties of quadruped creeping gaits, Math. Biosci. 3 (1968), 331–351.
Pandy, M. G., Kumar, V., Berme, N., and Waldron, K. L.: The dynamics of quadrupedal locomotion, ASME J. Biomechanical Eng. 110 (1988), 230–237.
Song, S. M. and Waldron, K. J.: Machines that Walk: The Adaptive Suspension Vehicle, MIT Press, Cambridge, MA, 1988.
Villar, C., Gorce, P., and Fontaine, J. G.: Legged robot: How to solve quasi-dynamic situation with a coordinator level, in: Internat. Conf. on Mechatronic ICAM'93, pp. 610–614.
Waldron, K. J.: Force and motion management in legged locomotion, IEEE J. Robotics Automation, RA-2(4) (1986), 214–220.
Wong, H. C. and Orin, D. E.: Dynamic control of a quadruped standing jump, in: IEEE Internat. Conf. on Robotics and Automation, Atlanta, GA, May 2–6, 1993, pp. 346–351.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gonzalez de Santos, P., Jimenez, M.A. & Armada, M.A. Dynamic Effects in Statically Stable Walking Machines. Journal of Intelligent and Robotic Systems 23, 71–85 (1998). https://doi.org/10.1023/A:1007993923530
Issue Date:
DOI: https://doi.org/10.1023/A:1007993923530