Abstract
Using the variational method, a system of resolving equations and boundary conditions is deduced on the basis of the nonclassical model for a composite bar. The order of the equations depends on the step of the iterative process. For normal and tangential loads, these equations are realized in trigonometric series. The results are presented as a sum of the classical solution and an additional part, which is determined by the influence of the shear deplanation of cross sections and is taken into account by higher iterations. The problems for bars with various cross section variants are considered.
Similar content being viewed by others
REFERENCES
V. G Piskunov, A. V. Gorik, and V. N. Cherednikov, “Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads. 1. Construction of a model,” Mech. Compos. Mater., 36, No. 4, 287–296 (2000).
V. G Piskunov, O. V. Gorik, M. I. Serov, and N. V. Andreeva, “Analytical solution of the problems of bending a composite beam on the basis of a refined model of deformation,” Probl. Prochn. [in Ukrainian], No. 1, 116–130 (1999).
A. L. Lyakhov, “Synthesis of the equation for the elastic deflections line of a bar by the methods of computer algebra,” Upravlyayushchie Sistemy Mashiny, No. 4, 18–23 (1999).
O. V. Goryk, “Determination of the stress-strain state of bent bars using an iterative process,” Mashinoznavstvo [in Ukrainian], No. 6, 34–40 (1999).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Piskunov, V.G., Gorik, A... & Cherednikov, V.N. Modeling of Transverse Shears of Piecewise Homogeneous Composite Bars Using an Iterative Process with Account of Tangential Loads. 2. Resolving Equations and Results. Mechanics of Composite Materials 36, 445–452 (2000). https://doi.org/10.1023/A:1006798314569
Issue Date:
DOI: https://doi.org/10.1023/A:1006798314569