Abstract
An electrolytic process for the removal of zinc from aqueous solutions using a flow-through cell with a reticulated vitreous carbon cathode is proposed. The operational conditions for the reactor were optimized as a function of the electrolyte pH, the cathode porosity and the solution flow rate. Both a synthetic solution and a real effluent from an industrial electroplating plant were processed until zinc concentration dropped from 50 to 0.1 mg dm−3 and from 152 to 0.5 mg dm−3, respectively. After the processing of the real effluent, tomographic images of the cathode were taken in order to investigate the current depth penetration during electrolysis. Results have shown that the current density decreases from the outer surface to the centre of the RVC cathode.
Similar content being viewed by others
References
R. Alkire and P.K. Ng, J. Electrochem. Soc. 124 (1977) 1220.
A. Tentorio and U. Casolo-Ginelli, J. Appl. Electrochem. 8 (1978) 195.
R.E. Sioda and H. Piotrowska, Electrochim. Acta 25 (1980) 331.
Y. Oren and A. Soffer, Electrochim. Acta 28 (1983) 1649.
D. Simonssom, J. Appl. Electrochem. 14 (1984) 595.
M. Matlosz and J. Newman, J. Electrochem. Soc. 133 (1986) 1850.
S. Langlois, J.O. Nanzer and F. Coeuret, J. Appl. Electrochem. 19 (1989) 736.
R. Carta, S. Palmas, A.M. Polcaro and G. Tola, J. Appl. Electrochem. 21 (1991) 793.
D. Pletcher, I. White, F.C. Walsh and J.P. Millington, J. Appl. Electrochem. 21 (1991) 667.
M. Abda, Z. Gaura and Y. Oren, J. Appl. Electrochem. 21 (1991) 734.
C. Ponce de Leon and D. Pletcher, Electrochim. Acta 41 (1996) 533.
R.C. Widner, M.F.B. Sousa and R. Bertazzoli, J. Appl. Electrochem. 28 (1998) 201.
D.R. Gabe, ‘Principles of Metal Surface Treatment and Protection’ 2nd edn (Pergamon Press, Oxford, 1978).
R. Suzuki, W.-H. Li and K. Nobe, Plat. Surf. Finish. 12 (1995) 58.
J. St-Pierre, N. Massé, É. Fréchette and M. Bergeron, J. Appl. Electrochem. 26 (1996) 369.
Water Regulations Act (US) (1989), Landesamt Fur Wasser Und Abfall (DL) (1982) and Conselho Nacional do Meio Ambiente (BR) (1986).
J. Wang, Electrochim. Acta 26 (1981) 1721.
T. Hurlen and K.P. Fischer, Electroanal. Chem. & Interf. Electrochem. 61 (1975) 165.
A.R. Despic and M.G. Pavlovic, Electrochim. Acta 27 (1982) 1539.
J. McBreen and E. Gannon, J. Electrochem. Soc. 130 (1983) 1667.
A.C. Beshore, B.J. Flori, G. Schade and T.J. O'Keefe, J.Appl. Electrochem. 17 (1987) 765.
J. St-Pierre and D.L. Piron, J. Electrochem. Soc. 139 (1992) 105.
I. Epelboin, M. Ksouri and R. Wiart, J. Electrochem. Soc. 122 (1975) 1206.
I. Epelboin, M. Ksouri and R. Wiart, Faraday Symp. Chem. Soc. 12 (1978) 115.
I. Epelboin, M. Ksouri and R. Wiart, J. Electroanal. Chem. 65 (1975) 373.
M.D. Pritzker and T.Z. Fahidy, J. Electrochem. Soc. 136 (1989) 2238.
A.T.S. Walker and A.A. Wragg, Electrochim. Acta 22 (1977) 1129.
S. Person, Polymer 29(5) (1988) 802.
C.D. Iacovangelo and F.G. Will, J. Electrochem. Soc. 132 (1985) 851.
D.J. Pickett, ‘Electrochemical Reactor Design’ (Elsevier Scientific, New York, 1979).
A. Storck, M.A. Enriquez-Granados and M. Roger, Electrochim. Acta 27 (1982) 293.
T. Doherty, J.G. Sunderland, E.P.L. Roberts and D.J. Pickett, Electrochim. Acta 41 (1996) 519.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lanza, M., Bertazzoli, R. Removal of Zn(II) from chloride medium using a porous electrode: current penetration within the cathode. Journal of Applied Electrochemistry 30, 61–70 (2000). https://doi.org/10.1023/A:1003836418682
Issue Date:
DOI: https://doi.org/10.1023/A:1003836418682