Abstract
Mole rat (Scaptochirus moschatus), a soil-burrowing mammal, can efficiently dig soil using its fore claws. The profile curves of its claw toe provide excellent structure for digging. In this paper, a biomimetic stubble-cutting disc was designed by learning from the geometrical characteristics of the mole rat claw toes. To compare the structural strength and working efficiency of the biomimetic disc and the conventional stubble-cutting disc, three-dimensional (3D) models of the discs were built and numerical analyzed in ABAQUS. In the dynamic soil cutting model, soil was modeled as an elastic-plastic material with elastic parameters, including Young’s modulus, Poisson’s ratio and Drucker-Prager criterion, which were obtained from triaxial tests. A general contact algorithm was used to simulate the interaction between rotary disc and soil. In FEA models, for the combined action of normal and friction stresses, the stress on the biomimetic disc is 34.33% lower than that of the conventional disc. For only the normal stress, the stress on the biomimetic disc is 22.64% lower than that on the conventional one. The magnitude of soil stress in biomimetic disc cutting model is 6.87% higher than that in conventional disc. The FEA results indicate that the biomimetic disc performs better in structural strength and cutting efficiency.
Similar content being viewed by others
References
Chinese Academy of Agricultural Mechanization Science (CAAMS). Agricultural Machine Design Manual, Machine-Building Industry Press, Beijing, 2007. (in Chinese)
Shmulevich I, Asaf Z, Rubinstein D. Interaction between soil and a wide cutting blade using the discrete element method. Soil Tillage Research, 2007, 97, 37–50.
Upadhyaya S K, Rosa U A, Wulfsohn D. Application of the finite element method in agricultural soil mechanics. Advances in Soil Dynamics, 2002, 2, 117–153.
Duncan J M, Chang C Y. Nonlinear analysis of stress and strain in soils. Journal of Soil Mechanics and Foundations Division, 1970, 96, 1629–1653.
Shen Z J. Some considerations on recent research activities of soil mechanics. Chinese Journal of Geotechnical Engineering, 1986, 8, 1–8.
Kushwaha R L, Shen J. Finite element analysis of the dynamic interaction between soil and tillage tool. Transactions of the ASABE, 1995, 38, 1315–1319.
Mouazen A M, Neményì M. Tillage tool design by the finite element method: part I. finite element modelling of soil plastic behaviour. Journal of Agricultural Engineering Research, 1999, 72, 37–51.
Mouazen A M, Neményì M. Tillage tool design by the finite element method: Part 1. Finite element modelling of soil plastic behaviour. Journal of Agricultural Engineering Research, 1999, 72, 37–51.
Abo-Elnor M, Hamilton R, Boyle J T. 3D Dynamic analysis of soil-tool interaction using the finite element method. Journal of Terramechanics, 2003, 40, 51–62.
Abo-Elnor M, Hamilton R, Boyle J T. Simulation of soil-blade interaction for sandy soil using advanced 3D finite element analysis. Soil Tillage Research, 2004, 75, 61–73.
Mouazen A M, Neményi M. Two-dimensional finite element analysis of soil cutting by medium subsoiler. Hungarian Agricultural Engineering, 1996, 96, 32–36.
Fielke J M. Finite element modelling of the interaction of the cutting edge of tillage implements with soil. Journal of Agricultural Engineering Research, 1999, 74, 91–101.
Gebregziabher S, Mouazen A M, Brussel H V, Ramon H, Meresa F, Verplancke H, Nyssenf J, Behailuf M, Deckersg J, Baerdemaeker J D. Design of the Ethiopian ard plough using structural analysis validated with finite element analysis. Biosystems Engineering, 2007, 97, 27–39.
Topakci M, Celik H K, Canakci M, Rennie A E W, Akinci I, Karayel D. Deep tillage tool optimization by means of finite element method: case study for a subsoiler tine. Journal of Food, Agriculture & Environment, 2010, 8, 531–536.
Abu-Hamdeh N H, Reeder R C. A nonlinear 3D finite ele-ment analysis of the soil forces acting on a disk plow. Soil Tillage Research, 2003, 74, 115–124.
Tong J, Moayad B Z, Ma Y H, Sun J Y, Chen D H, Jia H L, Ren L Q. Effects of biomimetic surface designs on furrow opener performance. Journal of Bionic Engineering, 2009, 6, 280–289.
Ji W F, Chen D H, Jia H L, Tong J. Experimental investigation into soil-cutting performance of the claws of mole rat (Scaptochirus moschatus). Journal of Bionic Engineering, 2010, 7, S166–S171.
Ji W F, Tong J, Jia H L, Chen D H, Liu C Y. Quantitatively characteristic features of the geometric structures of the claws of mole rat. Transactions of the Chinese Society of Agricultural Machinery, 2010, 41, 193–198. (in Chinese)
Richards B G, Peth S. Modelling soil physical behaviour with particular reference to soil science. Soil Tillage Research, 2009, 102, 216–224.
Zhang X Y. Geotechnical Plastic Mechanics. China Communications Press, Beijing, 1993. (in Chinese)
Li G X. Advanced Soil Mechanics, The Tsinghua University Press, Beijing, 2004. (in Chinese)
Tekeste M Z, Tollner E W. Non-linear finite element analysis of cone penetration in layered sandy loam soil. Considering precompression stress state. Journal of Terramechanics, 2009, 46, 229–239.
Mouazen A M, Neményì M. Finite element analysis of subsoiler cutting in non-homogeneous sandy loam soil. Soil Tillage Research, 1999, 51, 1–15.
Zhuang Z, You X C. Liao J H, Cen S, Shen X P, Liang M G. The Finite Element Analysis and Application Based on ABAQUS, The Tsinghua University Press, Beijing, 2009. (in Chinese)
Beijing University of Agricultural Engineering. Agricultural Machinery, China Agriculture Press, Beijing, 2003. (In Chinese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, M., Chen, D., Zhang, S. et al. Biomimeitc design of a stubble-cutting disc using finite element analysis. J Bionic Eng 10, 118–127 (2013). https://doi.org/10.1016/S1672-6529(13)60206-1
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1672-6529(13)60206-1