Abstract
The microstructural evolutons of the cold rolled Fe-0. 1C-5Mn steel during intercrical annealing were examined using combined advanced techniques. It was demonstrated that intercrtical annealing results in an ultrafine granular ferrite and austenite duplex structure in cold rolled 0.1C-5Mn steel. The strong partitioning of manganese and carbon elements from ferrite to austenite was found during intercritical annealing by scanning transmission electron microscopy (STEM) and X-ray diffraction (XRD). Strong effects of boundary characters on the austenite formation were indicated by austenite fast nucleation and growth in the high angle boundaries but sluggish nucleation and growth in the low angle boundaries. The ultrafine grained duplex structure in 0.1C-5Mn was resulted from the the sluggish Mn-diffusion and the extra high Gibbs free energy of ferrite phase. Based on the analysis of the microstructure evolution, it was pointed out that the intercritical annealing of the medium-Mn steels could be applied to fabricate an ultrafine duplex grained microstructure, which would be a promising approach to develop the 3rd generation austomobile steels with excellent combination of strength and ductility.
Similar content being viewed by others
References
R. Heimbuch, Making Fuel-Efficient Cars with Advanced Highstrength Steel Now Easier with New Toolkit, 2009-06-15, http://www.a-sp.org.
E. Emadoddin, A. Akbarzadeh, Gh. Daneshi, J. Mater. Proc. Tech. 203 (2008) 293–300.
P. Jacquesy, Q. Furnemont, A. Mertens, F. Dlannay, Phil. Mag. 81 (2001) 1789–1812.
S. Zaefferer, J. Ohlert, W. Bleck, Acta Mater. 52 (2004) 2765–2778.
S. Zhou, K. Zhang, Y. Wang, J. F. Gu, Y. H. Rong, Mater. Sci. Eng. A 528 (2011) 8006–8012.
M. J. Santofimia, L. Zhao, R. Petrov, C. Kwakernaak, W. G. Sloof, J. Sietsma, Acta Mater. 59 (2011) 6059–6068.
A. J. Clarke, J. G. Speer, M. K. Miler, R. E. Hackenberg, D. V. Edmonds, D. K. Matlock, F. C. Rizzo, K. D. Clarke, E. de Moor, Acta Mater. 56 (2008) 16–22.
K. X. Tao, H. Choo, H. Q. Li, B. Clausen, J. E. Jin, Y. K. Lee, Appl. Phys. Let. 90 (2007) 101911–101911–3.
R. L. Miller, Met. Trans. B 3 (1972) 905–912.
M. Niikura, J. W. Morris, Met. Trans. A 11 (1980) 1531–1540.
H. W. Luo, J. Shi, C. Wang, W. Q. Cao, X. J. Sun, H. Dong, Acta Mater. 59 (2011) 4002–4014.
J. Shi, X.J. Sun, M. Q. Wang, W.J. Hui, H. Dong, W. Q. Cao, Scripta Mater. 63 (2010) 815–818.
W. Q. Cao, C. Wang, J. Shi, M. Q. Wang, W. J. Hui, H. Dong, Mater. Sci. Eng. A 528 (2011) 6661–6666.
E. Jimenez-Melero, N. H. van Dijk, L. Zhao, J. Sietsma, S. E. Offerman, J. P. Wright, S. van der Zwaag, Acta Mater. 55 (2007) 6713–6723.
F.J. Humphreys, M. Hatherly, Recrystaization and Rlated Annealing Phenomena, second ed., Pergamon, Oxford, 1995.
M. Grujicic, Mater. Sci. Eng. A 127 (1990) 79–84.
O. Dmitrieva, D. Ponge, G. Inden, J. Millń, P. Choi, J. Sietsma, D. Raabe, Acta Mater. 59 (2011) 364–374.
D. Wolf, Acta Metall. Mater. 38 (1990) 781–790.
H.J. Frost, M. F. Ashby, F. Spaepen, Scripta Metall. 14 (1980) 1051–1056.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Foundation Item: Item Sponsored by National Natural Sience Foundation of China 51371057); National Basic Research Program of China (2010CB630803)
Rights and permissions
About this article
Cite this article
Shi, J., Hu, J., Wang, C. et al. Ultrafine Grained Duplex Structure Developed by ART-annealing in Cold Rolled Medium-Mn Steels. J. Iron Steel Res. Int. 21, 208–214 (2014). https://doi.org/10.1016/S1006-706X(14)60032-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(14)60032-7