Abstract
A new theoretical thermomechanical explanation of the uneven transverse temperature distribution, along the width for thin and wide hot rolled strip was proposed. In particular, starting from the irregular pressure and friction distribution which led to an uneven heat generation, a 2D mathematical model of calculating the transverse temperature distribution was presented. A physical explanation for this problem was given and the model was used as an essential basis to build a corresponding FEM simulation model, in which heat loss and generation were considered. Deformation and friction heat were described in details. For a clearer and more logical analysis, the heat generation problem was split into two parts: one for the strip centre, and one for the sides, in correspondence with the temperature peak points at 100 mm from the strip edge. Finally, the result shows that how the new theoretical model can lead to the exact interpretation of the measured uneven temperature distribution.
Similar content being viewed by others
References
Galantucci L M, Tricarico L. Thermo-Mechanical Simulation of a Rolling Process With an FEM Approach [J]. Journal of Materials Processing Technology, 1999, 92/93: 494.
Sun C G, Hwang S M. Prediction of Roll Thermal Profile in Hot Strip Rolling by the Finite Element Method [J]. ISIJ International, 2000, 40(8): 794.
Dyja H, Korczak P. The Thermal-Mechanical and Microstructural Model for the FEM Simulation of Hot Plate Rolling [J]. Journal of Materials Processing Technology, 1999, 92/93: 463.
SUN Wei-hua, WANG Guo-dong, WU Guo-liang. Analysis of Temperature Field on Transverse Section of Piece in the Process of Rolling Hot Strip [J]. Shandong Yejin, 1994, 16 (4): 30 (in Chinese).
LIU Zhen-yu, WANG Guo-dong, ZHANG Qiang. The Calculating Analysis on the Inhomogeneous Temperature Distribution Along the Strip Width During Hot-Rolling [J]. Journal of Iron and Steel Research, 1993, 5(4): 25 (in Chinese).
Ginzburg V B, Bailas R. Fundamentals of Flat Rolling [M]. New York: Marcel Deker, 2000.
Kalpakjian S, Schmid S R. Manufacturing Processes for Engineering Materials [M]. 4th ed. New Jersey: Prentice Hall, 2002.
Polukhin V P. Mathematical Simulation and Computer Analysis of Thin-Strip Rolling Mills [M]. Moscow: Mir Publishers, 1975.
Wusatowski Z. Fundamentals of Rolling [M]. Oxford: Pergamon Press, 1969.
Wright H, Hope T. Rolling of Stainless Steel in Wide Hot Strip Mills [J]. Met Technol, 1975, 2(12): 565.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tian, Ll., Patrizi, P., Zhang, J. et al. Theoretical explanation of uneven transverse temperature distribution in wide thin strip rolling process. J. Iron Steel Res. Int. 17, 18–23 (2010). https://doi.org/10.1016/S1006-706X(10)60080-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(10)60080-5