Abstract
To further decrease the fuel consumption of blast furnace in Tangshan Guofeng Iron and Steel Co Ltd, measures of improving the quality of sinter and pellet and the performances of raw materials were put forward through phase analysis and physical and chemical performance testing. The measures of increasing the grade of sinter, decreasing the sinter reduction degradation index at low temperature, and increasing the sinter soft melt performance at elevated temperature, as well as the reasonable process parameters of sintering were described in detail.
Similar content being viewed by others
References
ZHANG Yu-zhu, GENG Ming-shan, LI Gang, et al. The Influence of the Brazil CVRD and Indian Ores on the Quality of Sinter [J]. Journal of Hebei Institute of Technology, 2005, 27 (3): 11 (in Chinese).
HSIEH Li-heng. Effect of Raw Material Composition on the Sintering Properties [J]. ISIJ International, 2005, 45(4): 551.
LIU Li-na, HAN Xiu-li. A Review on Influence of Sinter Quality [J]. Journal of Hebei Institute of Technology, 2006, 28 (2): 18 (in Chinese).
KE Hai-bin, ZHANG Yu-zhu, LI Chun-zeng, et al. Effect of Basicity on Sinter Quality in Shigang [J]. China Metallurgy, 2007, 17(3): 21 (in Chinese).
Okazaki J, Higuchi K, Hosotani Y, et al. Influence of Iron Ore Characteristics on Penetrating Behavior of Melt Into Ore Layer [J]. ISIJ International, 2003, 43(2): 1384.
KE Hai-bin, ZHANG Yu-zhu, LI Chun-zeng, et al. Effect of Different Contents of MgO on Sinter Quality [J]. Henan Metallurgy, 2007, 15(1): 8 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yu, Yh., Feng, Gs. & Su, Dx. Measures of decreasing blast furnace fuel consumption and improving sinter performance in guofeng. J. Iron Steel Res. Int. 15, 9–12 (2008). https://doi.org/10.1016/S1006-706X(08)60240-X
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(08)60240-X