Abstract
Under the COVID-19 pandemic, various electronic labeling initiatives have accelerated worldwide in the healthcare and pharmaceutical fields as part of a wider digital transformation [1, 2]. Although there is no universal definition of electronic labeling (e-labeling) globally, it is widely understood that e-labeling refers to the product information that is distributed via electronic means. There are 5 factors to be considered in e-labeling, and these are discussed in this publication. APAC is an industry-driven initiative with 13 R&D-based pharmaceutical associations joining from 11 markets in Asia. e-labeling was discussed as a new topic starting in 2020, and a 22-question survey was conducted in November 2021 to understand the current e-labeling status. The survey results showed that e-labeling initiatives were at different levels of maturity in the Asian region, although most markets have started to discuss e-labeling initiatives. Various challenges exist around e-labeling initiatives due to a variety of different approaches being taken in the region. It would be advisable to develop regional guidance on how to proceed with e-labeling initiatives in the Asian region to have a consistent and efficient approach. The close collaboration between agencies, Health Care Professionals (HCPs), patients, and industry associations is important to move e-labeling initiatives forward in Asia.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Role of Labeling
Labeling is a key component of the application dossier in the Common Technical Document (CTD) for new marketing authorizations. Labeling is one of the most important official documents and important in all stages of the product lifecycle as it provides essential product information in terms of safety, efficacy, and quality in a timely manner. There are a variety of formats (e.g., paper, electronic) and types (e.g., for patients or HCP) distributed according to different national requirements. The labeling is a critical risk minimization measure as from time to time, and there could be new safety or efficacy information about the product, either from post-marketing surveillance or new clinical studies (e.g., new indications or formulations) or risk concerns which should be reflected in the product labeling [3, 4]. There are two types of labeling: HCP and Patient labeling. HCP labeling where required by local regulation, is the medical summation of product information intended for use by HCPs and usually contains more comprehensive information to describe the benefit-risk profile. Patient labeling/Patient Information Leaflet (PIL) is primarily intended for patients and is written in patient-friendly language [5,6,7].
In most markets, it is mandated by regulation to insert the product label in the commercial pack. Depending on the market, the pack may contain healthcare professional information (e.g., United States, Japan) and/or patient information (e.g., European Union).
What is e-Labeling?
Under the COVID-19 pandemic, various e-labeling initiatives have begun worldwide in the healthcare and pharmaceutical fields as part of a wider digital transformation. This is because of the need for immediately available updated labeling, which can be achieved by adopting dynamic e-labeling procedures to ensure that the most updated labeling is made available and accessible to different stakeholders [8, 9]. Through these initiatives, the regulators, industry, HCPs, and patients understand that e-labeling will deliver the most updated labeling to HCPs and patients and will improve the accessibility and understanding of approved medical product information, thereby enhancing adherence to medicines and improving patient outcomes [1, 10]. E-labeling also provides an opportunity to deliver personalized [11], user-friendly information and enhanced features for patients with visual and hearing disabilities. Although there is no universal definition of e-labeling globally, it is widely accepted that e-labeling refers to the product information that is distributed via electronic means.
There are 5 factors to be considered in e-labeling:
(1) availability of the latest labeling on a publicly accessible website (e.g., product information available online);
(2) accessible, reader-friendly format (e.g., scanning a machine-readable code);
(3) eliminating paper labeling from commercial pack;
(4) common electronic standard (e.g., structured content); and
(5) efficient information flow (e.g., interoperability between systems).
The availability of the latest labeling on a publicly accessible website is an important first step in improving patient safety and trust in medicines [1, 10]. The adoption of e-labeling with improved accessibility will enhance the user’s experience to navigate around the product information in a more user-friendly manner, and to better understand correct usage as well as the safety and efficacy profile of the drug. Eventual transformation from paper labeling to e-labeling will shorten the lead time to launch new products, improve efficiencies by eliminating the operational steps of inserting paper labeling in packs, and support environmental-friendly practices. In the future, e-labeling can be integrated with the wider digital healthcare system such as electronic medical records, resulting in greater efficiencies, and opportunities across a wide spectrum within healthcare.
In the Asian region, Japan [12, 13] and Singapore [14] have implemented e-labeling, and discussions on e-labeling initiatives have also been started in several markets (e.g., Taiwan [15], Thailand).
The purpose of the survey is to understand the current status of e-labeling across the 12 markets in the Asian region and confirm needs for industry associations. In addition, the survey aims to determine current challenges and possible approaches to be utilized in order to move forward with e-labeling initiatives in the Asian region.
Asia Partnership Conference of Pharmaceutical Associations (APAC)
APAC is an industry-driven initiative with thirteen R&D-based pharmaceutical associations joining from eleven markets in Asia to work together to realize the mission, “To expedite the launch of innovative medicines for the people in Asia.” Since its establishment in 2012, APAC has provided unique opportunities for constructive discussions among regulators, academia and industry on timely topics to improve “Access to Innovative Medicines” (ATIM) in Asia. APAC has begun discussing E-labeling as a new topic in 2020 and an APAC e-labeling Expert Working Group (EWG) was established in 2021 (See Table 1)
.
Methods
A 22-question survey was completed by APAC’s 12* member associations and Pharma Group Vietnam in November 2021 to understand the current e-labeling status in 12 markets in the Asian region. Each member association made only one response to the survey. There were 4 questions related to the general labeling requirements and 18 questions to inquire about the current status of e-labeling initiatives. The scope of the survey is for all prescription drugs, and over-the-counter (OTC) drugs is out of scope.
* One member association from each market completed the survey except for Korea, where 2 member associations completed it. For Korea, responses are consolidated and counted as one response if the questions are related to regulation or pharmaceutical law.
Results
General Labeling Requirements
Figure 1a shows what paper-package inserts are found in the commercial pack within the Asian region. Only 2 markets—Thailand [16] and Indonesia [17]—have both HCP label and PIL in the commercial pack. Figure 1b shows that more than half of markets do not have a mandatory national single template for HCP labeling, which means the ordering of the sections and section names are different depending on the product labeling even within the same market. In situations like this, e-labeling can significantly improve searchability.
As shown in Fig. 2a, the PIL for most prescription drugs is not required by regulations or laws in the majority of the markets, since only Indonesia requires the PIL for all products [17]. Figure 2b shows that more than two thirds of markets do not have a mandatory national single template for the PIL.
Current Status of E-Labeling Initiatives
Overall Progress
Only 2 markets—Japan and Singapore—have issued e-labeling related guidance in Asia (Fig. 3a). For Japan, the regulatory requirement to enclose paper-package insert to an individual product container (package) of medicinal products has been enforced on Aug 1st, 2021 (with a 2-year grace period before it goes into full effect). In this implementation, there are three major changes in operation. First, paper-package insert will no longer be enclosed in product containers (packages), and package inserts are viewed electronically on the Pharmaceuticals and Medical Devices Agency (PMDA) website. Second, the GS1 symbol including the GS1 product code is required to be displayed on the product container (package). Reading software is distributed to link the GS1 code to the package insert posted on the PMDA website. Package insert information (cautionary information etc. to consider) posted on the PMDA website is regarded as formal information. Third, the establishment of an organization/system to provide package insert information is required [12, 13].
In the Singapore guidance published on 30 April 2021, the document describes e-labeling is applicable to prescription-only medicines only, and Marketing Authoring Holders (MAHs) are responsible for ensuring that the e-labels published on its websites are aligned to the most up-to-date product information within 30 days after the approval by Health Sciences Authority (HSA). MAHs should state the Uniform Resource Locator (URL) (short link preferred), QR code, or other machine-readable code on the outer packaging. Also, it mentions e-labeling should be accessible to all users or catered to targeted users. It is voluntary for MAHs to implement e-Labeling where physical labels need not be distributed with the pack [14]. All associations have implemented, planned pilots, or discussed e-labeling (Fig. 3b). More than half of the markets have started to discuss e-labeling or planned pilot programs with their respective regulatory authorities. (Fig. 3c). Figure 3d shows that prescription drug and/or hospital products are considered in scope for e-labeling as answered by most associations. One regulatory agency—the Japan PMDA—has a back-up platform for e-labeling in case the server is offline as the electronic labels are hosted on the PMDA’s website (Fig. 3e).
Figure 4a shows that all associations believe that there are a number of benefits that can be achieved with the implementation of e-labeling, listing better readability and searchability for users as the most important benefit. On the other hand, Fig. 4b shows that there are some concerns about internet access to implement e-labeling in certain rural areas in the majority of markets. However, internet accessibility in rural areas may improve over time due to better infrastructure, or there could be dedicated hospitals or pharmacies equipped with better internet accessibility to address this issue [18].
The reduction in the volume of paper-package inserts for HCPs in commercial packs can be estimated based on the drug price and annual sales of manufactured drugs in concerned markets. For example in Japan, it is estimated by the authors that about 10 billion paper-package inserts can be reduced in Japan, given that 1 paper per 1 manufactured product is produced [19, 20]. The impact in the wider Asian region could be as high as 40 billion (calculated by the author) [21] if every package insert is replaced with e-labeling for information distribution.
(1) Availability of the Latest Labeling on a Publicly Accessible Website (Product Information Available Online)
Figure 5a and b shows the availability of HCP labeling information and patient labeling information, respectively, on Health Authority (HA) websites. 4 markets have published HCP labels for all products* on HA websites centrally and 5 markets have published them partially as well. 3 markets have not published labels on the HA website. On the other hand, only 4 markets have published patient labels on the HA website while 8 markets have not published patient labels on the HA website.
* One market publishes innovator product labeling only.
(2) Accessible, Reader-Friendly Format, e.g., Scanning a Code
Only 2 markets—Japan and Taiwan—have started to use GS1 barcodes to connect e-labeling information with the packaging. In Singapore, this accessibility measure is dependent on company choice. 4 markets are currently under discussion in connecting e-labeling information with the packaging. But, almost half of the markets have not started to discuss yet (Fig. 6).
(3) Eliminating Paper Labeling from Commercial Pack
As illustrated in Fig. 7a, the majority of markets still require paper-package inserts (labeling) for HCPs in the commercial pack as required by national regulations or laws. In order to eliminate paper labeling from commercial packs as a result of a requirement from a particular market, revision of the regulations or laws are needed to be implemented first. According to the e-labeling guidance/regulation, 2 markets—Japan and Singapore—can officially remove paper labeling from the commercial pack. In Thailand, the local law [16] can be interpreted as accepting either paper or paperless package inserts in commercial packs. However, there still remain other challenges to remove paper/printed package insert locally, such as internet access in rural areas, and patients/consumers’ behaviors at this moment to accept e-labeling.
Figure 7b shows that there is a timeline requirement from approval of labeling revision until the release of commercial products with updated labeling artwork in the majority of the markets. Figure 7c shows that most markets are required to update labeling artwork in commercial products within 6 months after labeling revision approval. Figure 7d shows how much e-labeling can reduce the lead time in launching new products if there is no need to insert paper labeling into commercial packs. If e-labeling is implemented, the most updated labeling information will be delivered in a timely manner without worrying about the artwork requirement timeline and, thus, contribute to a more stable, predictable supply.
(4) Common Electronic Standard, e.g., Structured Contents
Figure 8a shows that in the majority of markets, labels are published in a PDF format. Figure 8b shows that the labeling information is available in Extensible Markup Language (XML) on the HA website for only 2 markets—Japan and Korea. Figure 8c shows that no other standardized dictionaries are used except for MedDRA.
(5) Efficient Information Flow, e.g., Interoperability Between Systems
No interoperability for e-labeling has been implemented and even the discussion has not been started yet (Fig. 9).
Discussion
The COVID-19 pandemic accelerated the use of technology to enhance access to information. Product labeling, which has traditionally been printed and formed part of the packaging, is now slowly being made accessible electronically. Publishing labeling is already being implemented in other parts of the world [22,23,24]. While some markets participating in this survey have laid the foundations for e-labeling pre-pandemic, there is no doubt that the COVID-19 facilitated its implementation.
As the e-labeling system is relatively new in some markets and others are yet to begin on its implementation, challenges have been identified. For COVID-19 vaccines, instead of inserting paper labeling, e-labeling has been accepted to improve regulatory agility as an exceptional case [2]. e-labeling meets the challenges of the pandemic and is a critical method to deliver vaccines/medicines quickly and globally. Labels have been published on the central database in many markets, but in reality, they are often not updated in a timely manner. One key area is to establish a robust process to publish updated labeling in a timely manner in the database. The centralized database should be a “single source of truth” for HCPs and patients which can improve trust and credibility. PIL for many products may not be available in the Asian region. In order for patients to understand the product information, the PIL should be written in patient-friendly language. Thus, it would be necessary to discuss the availability of patient-friendly product information. As pdf format is still used commonly in the industry. To maximize the full benefits of e-labeling, a structured content format will enable easy searching, tracking, reuse, and integration with other digital healthcare platforms. Some markets in the Asian region have implemented or started a pilot program with putting QR code or GS1 bar code/ two-dimensional (2D) codes [25] on carton, which can be scanned via mobile device and linked to product information in an electronic way.
Since there are concerns about internet connectivity in rural areas [18], and emerging risks in the internet such as cybersecurity, a step-by-step approach to improve digital infrastructure may need to be considered in order to progress e-labeling initiatives. In the majority of markets, a paper-package insert in the commercial pack is still required, and the timeline of artwork implementation for a paper-package insert is set as within 6 months. With paper-package insert, it can be delivered anywhere physically and securely. However, it requires more time for delivery as compared with e-labeling. If paper labeling can be eliminated from the commercial pack in the future after reducing concerns around internet connectivity, it will improve efficiency by eliminating operational steps of inserting paper labeling in packs and support environmental-friendly practices. However, packaging specifications might have an impact in implementing e-labeling practices. The risk assessment to eliminate paper labeling from the commercial pack should be made, since the paper label may act as a cushion material [10]. The step-wise approach such as keeping a paper labeling after implementing e-labeling for a period of time would be an option, so that all sides including the regulators, HCPs and patients, would be comfortable with the transition to e-labeling. For the markets that have a mandate to insert paper labeling, it would be preferable to start discussing advocacy plans to eliminate paper labeling from the commercial pack in appropriate timing and its process, such as implementing a step-wise approach, to engage between regulatory authority and industry associations in order to move forward e-labeling discussions.
Conclusion
As the e-labeling survey shown in Fig. 10, there are different levels of e-labeling initiatives in the Asian region, although most of the markets have started to discuss e-labeling initiatives. The discussion on e-labeling initiatives is still at early stage in the majority of markets. There is a challenge to e-labeling initiatives due to a variety of approaches in the region. In that case, companies have to follow each market’s approach, although the manufacturing sites have been integrated across regions. It will be difficult and inefficient, and this will bring a negative impact on the implementation on e-labeling. Therefore, it would be advisable to develop a regional guidance on how to proceed e-labeling initiatives in the Asian region to have a consistent approach. Asian counties can collaborate further in terms of e-labeling although the guidance will neither be intended to mandate nor to include the implementation plan for each market. The close collaboration between agencies, HCPs, patients, and industry associations is important to move the e-labeling initiative forward in Asia.
Change history
31 October 2022
A Correction to this paper has been published: https://doi.org/10.1007/s43441-022-00476-z
References
Roberts K, et al. Creating E-Labeling Platforms: An Industry Vision. Clin Pharmacol Ther. 2020;108(4):716–8.
Bamberger, et al. Replacing vaccine paper package inserts: a multi-country questionnaire study on the acceptability of an electronic replacement in different target groups. BMC Public Health. 2022;22:156.
PFSB/SD Notification No. 0411–1, PFSB/ELD Notification No. 0411–2, Risk Management Plan Guidance 11-Apr-2012,
EMA Guideline on good pharmacovigilance practices (GVP) Module V – Risk management systems (Rev 2) https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-good-pharmacovigilance-practices-module-v-risk-management-systems-rev-2_en.pdf
PMDA wordings for Guides for patients https://www.pmda.go.jp/safety/info-services/drugs/items-information/guide-for-patients/0001.html, https://www.pmda.go.jp/files/000225751.xlsx
EMA medical terms simplifier https://www.ema.europa.eu/en/documents/other/ema-medical-terms-simplifier_en.pdf
21 CFR 208: Medication guides for prescription drug products https://www.ecfr.gov/current/title-21/chapter-I/subchapter-C/part-208
Regulatory Agilities in the Time of COVID-19: Overview, Trends, and Opportunities Clin Ther. 2021 Jan;43(1): 124–139
Murray M., L.John C. W. L. Pandemic Best Regulatory Practices: An Urgent Need in the COVID-19 Pandemic Clin Pharmacol Ther. 2020 Oct;108(4): 703–705
Makoto N, Tamaki T. E-labeling system in prescription medicines in Japan: measures and perspectives in pharmaceutical industry Translat Regulat Sci. 2022 Apr;4(1):12–9.
Digital Labels: Reimaging product information in the digital age to improve patient outcomes : in Vivo 2019 October :26–29 https://invivo.pharmaintelligence.informa.com/-/media/supporting-documents/in-vivo-issue-pdfs/iv1910_lrs.pdf
Japan: PSEHB/PSD No. 0211: Providing Information on Precautions for Use for Pharmaceutical Products, etc. 19-Feb-2021
Japan: PSEHB No. 1204/1: Promulgation of the Law to Revise the Pharmaceutical and Medical Device Act 04-Dec-2019
Singapore: Appendix 7a: Guidance on Electronic Labelling for Therapeutic Products for information on e-labelling requirements, registrant’srolesand responsibilities.
Taiwan: TFDA Official Letter, Ref. No. FDA Yao-Zi 1101460142, December 30, 2021, 藥品以電子結構化仿單取代紙本仿單試辦方案
Thailand: Guideline for Leaflet Development for Drug research and Innovation, https://www.fda.moph.go.th/sites/oss/Shared%20Documents/SmPC-PIL_HPEP%20guideline_updated%20May2019.pdf
Indonesia: The NADFC Republic of Indonesia Regulation No. 24 year 2017 on Criteria and Procedure of Drug Registration, https://jdih.pom.go.id/download/product/769/24/2017
Digital 2022 April Global Statshot Report https://datareportal.com/reports/digital-2022-april-global-statshot
Annual Report on Statistics of Production by Pharmaceutical Industry in 2019, Table 19. Amount of production by drug form category of drugs, https://www.mhlw.go.jp/topics/yakuji/2019/nenpo/
Items listed in the NHI Drug Price Standard, https://www.mhlw.go.jp/topics/2020/04/tp20200401-01.html
Copyright © 2022 IQVIA. Calculated by the author based on IQVIA MIDAS 2020. Reprinted with permission.
Plenary 5: Recommendations of Extraordinary Virtual International Conference of Drug Regulatory Authorities (ICDRA) at Extraordinary (Virtual) International Conference of Drug Regulatory Authorities (ICDRA) 20–24 September 2021. https://cdn.who.int/media/docs/default-source/medicines/regulatory-updates/virtual-icdra-2021/extra-icdra_plenary5_recommendations.pdf?sfvrsn=d7b1db92_5
Public Statement, 8th Meeting of the IPRP Management Committee, 19th & 22th November 2021 https://admin.iprp.global/sites/default/files/2021-12/IPRP8_PublicStatement_Final_2021_1206.pdf
Electronic Product Information for Human Medicines in the European Union−Key Principles https://www.ema.europa.eu/en/electronic-product-information-human-medicines-european-union-key-principles
GS1HC-Reference-Book-2021–2022, https://www.gs1.org/docs/healthcare/Reference-Book/GS1HC-Reference-Book-2021-2022-FINAL.pdf
Acknowledgements
We gratefully acknowledge Hong Kong Association of the Pharmaceutical Industry (HKAPI-Hong Kong), International Pharmaceutical Manufacturers Group (IPMG-Indonesia), International Research-based Pharmaceutical Manufacturers Association (IRPMA-Taiwan), Japan Pharmaceutical Manufacturers Association (JPMA-Japan), Korea Pharmaceutical and Bio-Pharma Manufacturers Association (KPBMA-Korea), Korean Research-based Pharmaceutical Industry Association(KRPIA-Korea), OPPI(Organization of Pharmaceutical Producers of India-India), PhAMA(Pharmaceutical Association of Malaysia-Malaysia), PHAP(Pharmaceutical and Healthcare Association of the Philippines), Pharma Group (Vietnam), Pharmaceutical Research & Manufacturers Association (PReMA-Thailand), R&D-based Pharmaceutical Association Committee (RDPAC-China), Singapore Association of Pharmaceutical Industries (SAPI-Singapore) who have completed the survey and contributed the publication. We would also like to thank Dr. Junko Sato, PMDA for supporting the APAC e-labeling EWG initiative.
Funding
Research financial support and Open Access funding are enabled and organized by the industry associations and/or its member participating in APAC e-labeling EWG.
Author information
Authors and Affiliations
Contributions
RM: data collection, analysis, visualization, writing, editing, and supervision. KY: data collection, analysis, writing, editing, and review. JL: data collection, analysis, writing, editing and review IT: editing and review. DK: editing and review. JC: editing and review. JS: editing and review. IP: editing and review. AC: editing and review. PQ: editing and review. UH: editing and review. ES: editing and review. TN: editing and review. AP: editing and review. RM: editing and review.
Corresponding author
Ethics declarations
Conflict of interest
The authors have not disclosed any competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Matsui, R., Yamaguchi, K., Lee, J.J.V. et al. Survey Result for E-labeling Initiatives in Asia. Ther Innov Regul Sci 57, 251–260 (2023). https://doi.org/10.1007/s43441-022-00462-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s43441-022-00462-5