Abstract
In the current study, response surface methodology (RSM) was successfully used to the method of preparation of fused silica (SiO2) ceramic composites using gelcasting, a near net shape method. The effects of input parameters like solid loading (SL), monomer content (MC), ratio of monomer (RM), and additive boron nitride (BN) and on responses such as flexural strength (FS), porosity (Por.), and dielectric constant (DE) were studied. RSM with central composite face-centered design with 6 center points approach used for planning the tests. The relation between the input variables on the output was investigated and modeled. Three regression models were established using RSM related independent input variables to describe the FS, Por., and DE as the response. The uniqueness of the established model is examined using Analysis of Variance (ANOVA) at 95% confidence level. The numerical investigation of the results showed that in range studied, the three process variables have significant effect on the responses. The obtained mathematical models have high R2 values (97.66% for FS, 98.45% for Por., and 94.34% for DE) show the good relation between the test and predicted data. The optimal estimates found using RSM was practically confirmed and was 66.30 MPa FS, 23.66% Por., and 4.307 DE acquired at 47.97% SL, 15 wt% MC, 3 RM, and 9.68 wt% BN, respectively.
Graphical abstract
Similar content being viewed by others
References
H. Song, J. Dan, X. Chen, J. Xiao, J. Xu, Experimental investigation of machinability in laser-assisted machining of fused silica. Int J Adv Manuf Technol 97, 267–278 (2018)
K.K. Kandi, G. Punugupati, S.K. Pal, S.P. Rao Chilakalapalli, Effect of monomers content and their ratio on gelcasting of fused silica ceramics. Trans Indian Ceram Soc 75(3), 185–188 (2016)
G. Punugupati, P.S.C. Bose, G. Raghavendra, C.S.P. Rao, Influence of solid loading and ratio of monomers on mechanical and dielectric properties of hybrid ceramic composites. SILICON 11(6), 2701–2710 (2019)
H. Du, Y. Li, C. Cao, Effect of temperature on dielectric properties of Si3N4/SiO2 composite and silica ceramic. J Alloy Compd 503(1), L9–L13 (2010)
W. Wan, J. Yang, Y. Feng, W. Bu, T. Qiu, Effect of trace alumina on mechanical, dielectric, and ablation properties of fused silica ceramics. J Alloy Compd 675, 64–72 (2016)
B. Chen, X. Liu, X. Zhao, Z. Wang, L. Wang, W. Jiang, J. Li, Preparation and properties of reduced graphene oxide/fused silica composites. Carbon 77, 66–75 (2014)
S. Abbas, S. Maleksaeedi, E. Kolos, A.J. Ruys, Processing and properties of zirconia-toughened alumina prepared by Gelcasting. Materials 8(7), 4344–4362 (2015)
J. Eichler, C. Lesniak, Boron nitride (BN) and BN composites for high-temperature applications. J Eur Ceram Soc 28, 1105–1109 (2008)
B. Yuan, J.X. Liu, G.J. Zhang, Y.M. Kan, P.L. Wang, Silicon nitride/boron nitride ceramic composites fabricated by reactive pressureless sintering. Ceram Int 35, 2155–2159 (2009)
W. Dong, C.A. Wang, L. Yu, S.X. Ouyang, Effect of sintering additive content on mechanical and dielectric properties of porous Si3N4/BN composite ceramics. J Chin Ceram Soc 40, 851–855 (2012)
G. Wen, G.L. Wua, T.Q. Lei, Y. Zhou, Z.X. Guob, Co-enhanced SiO2-BN ceramics for high-temperature dielectric applications. J Eur Ceram Soc 20, 1923–1928 (2000)
D. Jia, L. Zhou, Z. Yang, X. Duan, Y. Zhou, Effect of preforming process and starting fused SiO2 particle size on microstructure and mechanical properties of pressurelessly sintered BNp/SiO2 ceramic composites. J Am Ceram Soc 94, 3552–3560 (2011)
W. Dong, C.A. Wang, L. Yu, S.X. Ouyang, Preparation and properties of porous Si3N4-SiO2-BN composite ceramics. Key Eng Mater 512–515, 828–831 (2012)
M. Du, J.Q. Bi, W.L. Wang, X.L. Sun, N.N. Long, Microstructure and properties of SiO2 matrix reinforced by BN nanotubes and nanoparticles. J. Alloy Compd 509, 9996–10002 (2011)
H. Zhai, H. Cai, X. Yang, J. Li, G. Guo, C. Cao, Preparation and properties of BN-SiO2 composite ceramics. Key Eng Mater 336–338, 1426–1428 (2007)
D.G. Montgomery, Design and analysis of experiments, 8th edn. (Wiley, New York, 2012)
G.E.P. Box, N.R. Draper, Empirical model building and response surfaces (Wiley, New York, 1987)
G. Punugupati, P.S.C. Bose, G. Raghavendra, C.S.P. Rao, Response surface modeling and optimization of Gelcast fused silica micro hybrid ceramic composites. SILICON 12(7), 1513–1528 (2020)
C. Song, X. Li, L. Wang, W. Shi, Fabrication, characterization and response surface method (RSM) optimization for tetracycline photodegration by Bi 3.84 W 01.6 O 6.24-graphene oxide (BWO-GO). Sci Rep 6(1), 1–12 (2016)
J. Li, J. Peng, S. Guo, L. Zhang, Application of response surface methodology (RSM) for optimization of sintering process for the preparation of magnesia partially stabilized zirconia (Mg-PSZ) using natural baddeleyite as starting material. Ceram Int 39(1), 197–202 (2013)
F. Xiangli, W. Wei, Y. Chen, W. Jin, N. Xu, Optimization of preparation conditions for polydimethylsiloxane (PDMS)/ceramic composite pervaporation membranes using response surface methodology. J Membr Sci 311(1–2), 23–33 (2008)
C.-J. Bae, A. Ramachandran, K. Chung, S. Park, Ceramic stereolithography: additive manufacturing for 3D complex ceramic structures. J Korean Ceram Soc 54(6), 470–477 (2017)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kandi, K.K., Punugupati, G., Madhukar, P. et al. Effect of boron nitride (BN) on mechanical and dielectric properties of fused silica ceramic composites. J. Korean Ceram. Soc. 59, 565–577 (2022). https://doi.org/10.1007/s43207-021-00184-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s43207-021-00184-8