Abstract
Purpose of Review
The increasing number of contributions in the field of small-scale robotics is significantly associated with the progress in material science and process engineering during the last half century. With the objective of integrating the most optimal materials for the propulsion of these motile micro- and nanosystems, several manufacturing strategies have been adopted or specifically developed. This brief review covers some recent advances in materials and fabrication of small-scale robots with a focus on the materials serving as components for their motion and actuation.
Recent Findings
Integration of a wealth of materials is now possible in several micro- and nanorobotic designs owing to the advances in micro- and nanofabrication and chemical synthesis. Regarding light-driven swimmers, novel photocatalytic materials and deformable liquid crystal elastomers have been recently reported. Acoustic swimmers are also gaining attention, with several prominent examples of acoustic bubble-based 3D swimmers being recently reported. Magnetic micro- and nanorobots are increasingly investigated for their prospective use in biomedical applications. The adoption of different materials and novel fabrication strategies based on 3D printing, template-assisted electrodeposition, or electrospinning is briefly discussed.
Summary
A brief review on fabrication and powering of small-scale robotics is presented. First, a concise introduction to the world of small-scale robotics and their propulsion by means of magnetic fields, ultrasound, and light is provided. Recent examples of materials and fabrication methodologies for the realization of these devices follow thereafter.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Micro- and nanorobots are untethered small-scale devices that display the ability of motion in fluids when they are stimulated by means of external sources of energy such as magnetic or electric fields, ultrasound, light, or combinations thereof [1,2,3, 4•, 5]. Small-scale robots belong to the micro- and nanomotors’ family. However, in contrast with other small-scale motors (mainly chemically propelled swimmers), micro- and nanorobots display both controllable speeds (including on/off motion) and directionality [6,7,8,9]. Hence, this review will not deal with chemically propelled micro- and nanomotors, their propulsion mechanisms, and the materials used for their propulsion.
Small-scale robotics offer the promise of miniaturized mobile platforms for realizing tasks such as targeted therapeutic delivery, microsurgery, localized diagnosis, on-the-fly chemistry, or environmental cleaning [1, 3, 5, 10, 11]. While research in small-scale robotics is a relatively young area of research, in the past few years, efforts have been increasingly moving from fundamental studies to practical applications. This becomes especially apparent in the area of biomedical micro- and nanorobotics, where we have recently seen considerable research of these devices in in vivo models [12,13,14,15,16]. The swift progress in micro- and nanorobotics during the last two decades has been chiefly catalyzed by developments in material science and micro- and nanofabrication. Control over matter, shape, and assembly at micro- and nanoscales can now be accomplished by an extensive variety of methods such as 2D- and 3D-lithography [17], atomic layer deposition [18], template-assisted electrochemical processing [19], microfluidics [20, 21], or 3D (bio)printing [22], among others. The most desired approaches for manufacturing micro- and nanorobots are those that enable batch production, are compatible with other fabrication approaches, and allow for the integration or combination of a wide variety of materials. Additionally, the addition of a material should not impact the properties of other components. For example, the component of a robot that enables light-triggered motion should not be shadowed by integrating a functional material that would interfere by absorbing light, thus impairing the motion of the robot.
In the present review, we give a brief overview on the means for providing motion to small-scale robots using magnetic fields, ultrasound, and light as well as their propulsion mechanisms, with a major focus on the materials and designs that enable the locomotion of the robots.
Propulsion of Micro- and Nanoscale Robots
Essentially, two types of forces exist on a system that moves in a fluid: inertial forces and viscous forces, the ratio of which is known as the Reynolds number (Re). Viscous forces are surface-related, while inertial forces are proportional to weight. Because at small scales, that is, at low Re, viscous forces are more relevant to those related to inertia, the mechanisms that are used for macroscale propulsion do not function at the micro- and nanorealms [23,24,25]. Illustratively, the mechanism that enables a scallop to swim, which is by opening and closing its hinged shells, would not work at low Reynolds number (at least in Newtonian fluids). In other words, a micro- or a nanoscopic scallop would not be able to move from its original position, and no net translation would be attained. This phenomenon is reflected in the Scallop’s theorem [26,27,28], which states that in order to achieve net translation, a non-reciprocal stroke or deformation is necessary. Nature has engineered machinery to overcome the challenge of motion at small scales by providing tools and mechanisms such as rotating chiral appendages or beating oars. For instance, certain bacteria propel by rotating a bundle of helical flagella [14, 29, 30]. Sperm cells swim by swinging their tail to move through the highly viscous seminal fluid [15, 29, 31]. Other mechanisms for motion at small scales exploit friction on surfaces. For example, cells such as keratocytes or neutrophils roll on tissues to translocate[32].
While challenges in small-scale propulsion still exist specially in complex biological fluids, researchers have demonstrated several strategies to provide locomotion to micro- and nanoarchitectures. In the area of small-scale robotics, the use of external sources of energy such as light, ultrasound, electric fields, magnetic fields, or combinations of these has been proposed [2, 6, 10, 33, 34••]. The mechanism used for propulsion not only determines the specific materials, which have to be specifically reactive to the external input of energy, but also the optimal fabrication route for the construction of the device. In the following, we briefly comment on each type of locomotion strategy.
Light-Driven Small-Scale Robots
Propulsion of micro- and nanostructures using light has been achieved in different ways, for instance, exploiting the photocatalytic features of certain materials. When a photocatalytic material is exposed to light of a particular wavelength, separation of electrons and holes takes place [35]. Electrons and holes, in turn, can react with water or other available redox compounds in a surrounding electrolyte, generating different types of radical species. Yet, to be able to achieve an optimal propulsion, usually a material that can act as acceptor of electrons or holes is required to avoid the recombination of these within the photocatalytic material. In the example given (Fig. 1(A) and (B)), a photocatalytic swimmer is presented [36]. The swimmer is a Janus microsystem comprising a black titania sphere, which acts as the photocatalytic material, and a gold hemispherical coating serving as an electron acceptor. Black titania is able to absorb light in both the visible and the ultraviolet region of the spectrum of light. Hence, when it is subject to light, electrons and holes are generated. Electrons travel to the gold region, thus generating an in-built electric field. Electrons on the gold side react with protons in water, while water is oxidized at the black titania surface, overall generating a proton gradient that causes the Janus system to propel by self-electrophoresis. Other photocatalytic systems have been designed to be propelled by osmotic pressure. Pine and co-workers have shown that hematite peanut particles in solutions containing hydrogen peroxide (H2O2) can swim when subject to blue light [37]. Because of the photocatalytic decomposition of H2O2 mediated by these particles, a chemical gradient is generated at the particle-electrolyte interface. As this gradient is symmetrically distributed around the surface of the particles, those remain in their positions. Yet, a roughening surface treatment of the particles enables an asymmetric chemical gradient distribution that causes the self-propulsion of the particles. The authors also demonstrate cargo transportation using their photosensitive microstructures. Bubble propulsion is also another possible mechanism for photocatalytic swimmers. Guan and co-workers have recently shown that tubular microarchitectures made of photocatalytic titania can be propelled by UV-light-induced bubbles [38]. In this case, a fuel such as hydrogen peroxide that decomposes in gas species such as molecular oxygen is necessary (Fig. 1(C) and (D)). In principle, the photocatalytic swimmers discussed in this section do not qualify as robots because their directionality is not controlled. However, it is possible to control and program the directionality and speed of photocatalytic swimmers using chemical modifications. Tang and co-workers have demonstrated that by controlling the zeta potential of a self-electrophoretic Janus nanotree (Fig. 1(E) and (F)) architecture is possible to engineer its (negative or positive) phototactic behavior [39]. The nanotrees were actuated in solutions containing diverse fuels such as H2O2 or benzoquinone/hydroquinone redox couple.
Recently, several papers have reported locomotion of swimmers by exploiting photocatalysis. The vast majority of these swimmers consist mainly of Janus particle designs, the fabrication of which usually involves a wet chemical process (and sometimes an additional thermal treatment) for synthesizing the photosensitive chassis structure followed by the physical vapor deposition (e.g., evaporation, sputtering) of the material that covers half of the chassis surface. Mainly, titanium dioxide has been used as the photoactive part, although this material, unless treated, only absorbs in the UV region of the light spectrum. Yet, some recent studies have introduced other interesting materials for photocatalytic locomotion of micro- and nanoswimmers that can be operated under visible light. For example, Jang et al. demonstrated that upon a simple thermal treatment, titania could be easily transformed in black titania, which allows for building Janus micromotors with an evaporated gold-coated hemisphere [36]. The swimmers can be propelled not only under UV illumination but also in the entire region of the visible light spectrum. Interestingly, the speed of the swimmers could be tailored by changing the light wavelength, with the swimmers being faster under UV irradiation and blue light and slower towards higher wavelengths. The swimmers were able to propel both in solutions containing hydrogen peroxide and also in pure water. Cai and co-workers have recently demonstrated that cuprous oxide filled with nitrogen-doped carbon nanotubes (N-CNTs) can be propelled under green and blue lights by reacting with non-cytotoxic glucose as a fuel [40]. The swimmers were fabricated using a wet chemistry procedure on which cuprous oxide was precipitated in the presence of N-CNTs. Lotsch and co-workers have recently reported about two-dimensional organic poly(heptazine imide) carbon nitride microparticles (Fig. 1(G)) [41]. Carbon nitrides are an interesting option as their motion capability is not significantly influenced by the ionic nature of the swimming media. Additionally, they can also be actuated under visible light. By asymmetrically irradiating the structure, photocatalytic processes are triggered, subsequently generating an ion flow around and through the particle. Figure 1(H) shows the schematics of the proposed mechanism for propulsion. The swimmers are fabricated by means of a potassium thiocyanate melt synthesis employing melamine. Escarpa and co-workers recently reported on polystyrene-based Janus micromotors with a gold hemisphere decorated with quantum dots for light propulsion [42]. The quantum dots consisted of core–shell structures with cadmium selenide cores coated with zinc sulfide. The swimmers were propelled by bubble propulsion using hydrogen peroxide as a fuel and upon irradiation with UV or visible light. Lyutakov and co-workers have recently reported on glucose-fueled sun light-driven polypyrrole-based nanoswimmers [43]. Two types of nanorobots were fabricated using a wet chemistry polymerization approach in which pyrrole and 1-(2-carboxyethyl)-pyrrole were used as monomers and mixed in a solution containing iron(III) chloride as oxidant and polyvinyl alcohol. Next, the resulting polypyrrole-based nanoparticles were decorated with glucose oxidase and catalase enzymes, which were anchored to the nanoparticles through the terminal carboxylates activated by N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide hydrochloride. See Fig. 1(I) for the fabrication scheme of the swimmers.
Another strategy to propel structures with light consists of using materials that deform or morph under irradiation. An example of these materials is liquid crystal elastomers (LCEs) containing photoisomerizable molecules. Liu and co-workers, for example, demonstrated soft robotic structures made of polymers embedding azobenzene chromophores [44]. Upon a UV-light irradiation, the azobenzene undergoes a trans–cis isomerization, which macroscopically results in a deformation (Fig. 2(A) and (B)). The original shape is recovered by exposing the structure to visible light [44], which brings the molecules back to their trans conformation. Using these materials, the researchers realized a microrobot composed of a LCE-based flagellum and a head comprising an LCE-based gripper. The robot was able to perform wave-like swinging when exposing light to the flagellum. Additionally, pickup of cargo with the light-driven gripper and transportation was demonstrated. Recently, Fischer and co-workers demonstrated the fabrication of cylindrical robots made of azodyes-containing LCEs [45]. By means of structured light, the soft robotic structures were able to swim under a periodic light pattern which was scanned through the robotic structure from one head to the other. The robot was able to mimic the propulsion mechanism of ciliate microorganisms, which swim by a coordinated cilia motion that results into traveling metachronal waves (Fig. 2(C) and (D)). For an extensive review on light-driven swimmers, the reader is referred to the reviews [33, 46].
Swimmers and robotics structures built upon liquid crystal polymer networks are difficult to be processed at the micro- and nanoscale. Usually, these materials are prepared in bulk solutions, then molded or deposited as films by spin coating, and finally photocured. Scalpels or laser are then used to cut the structures. Figure 2(E) shows a liquid crystal network-based kirigami structures that have the ability of changing shape or locomote upon light irradiation reported by Priimagi and co-workers [47]. The liquid polymer network was fabricated using a mixture containing the monomer 4-methoxybenzoic acid 4-(6-acryloyloxyhexyloxy)phenyl ester, a cross-linker, the light-responsible azo molecule, and a photoinitiator (Fig. 2(F)). The mixture containing the polymer was then infiltrated between two chemically modified glass slides with spacers and then photopolymerized. The resulting films were then cut by laser to provide the desired 2D pattern for the kirigami. The cut pattern was then rolled up around a tube structure to induce a tubular shape. Figure 2(G) shows the rolling motion of the kirigami structure under light activation.
The phototermal effect has also been used for the manipulation of micro- and nanostructures. By creating a thermal gradient around a small-scale object, this can be propelled as a consequence of thermophoresis or Soret effect, in short, by thermal diffusion of the fluid. In order to achieve opto-thermophoresis, usually the swimmer should exhibit an asymmetric distribution of its components, that is, the photothermally sensitive material should be arranged asymmetrically or in a specific location in the swimmer architecture. For example, Janus architectures have been widely employed to demonstrated photothermally induced propulsion. In Fig. 2(H) and (I), an example of this kind of propulsion concept is illustrated. He and co-workers demonstrated that Janus particles consisting of mesoporous silica nanoparticles coated by a light-absorbing gold hemisphere can swim due to self-thermophoresis when they are subject to near-infrared (NIR) light [48]. The authors demonstrated that the nanoswimmers propulsion, including their on/off motion, could be tuned by the NIR laser. For an extended explanation of the working principles of optically induced thermorphoretic propulsion, we derive the readers to the review by Sun and co-workers [49].
Acoustically Driven Small-Scale Robots
Ultrasound is a relatively recent approach that has been applied to propel micro- and nanorobots [50•]. Basically, standing waves, traveling waves, single beam, or arbitrary wave fields can be used to effectively manipulate small-scale objects, including biological structures [51]. In standing waves, the structures are trapped at the waves’ pressure nodes (or antinodes). The motion of the structures can be controlled by changing the nodes positions, which is achieved by modulating the resonant frequency or relative phase of the waves generated at different transducers (Fig. 3(A-C) ). Mallouk and co-workers demonstrated that by means of acoustic standing waves, bimetallic segmented nanorods not only could be propelled but also rotated, aligned, and assembled (Fig. 3(D-E)). While the use of standing waves is very useful for the propulsion of small-scale objects, its applicability in vivo is challenging because standing waves cannot be reliably established in living organisms [52]. A more robust approach for in vivo applications would be the use of traveling acoustic waves. In traveling waves, a unidirectional propulsive force is created enabling swimmers to move along the direction of the wave propagation. The propulsive force is a result from the interactions of the swimmers with the ultrasound. Additionally, compared with standing waves, the acoustic radiation forces in traveling waves are more sensitive to the size of structures. Ahmed et al. demonstrated the motion of nanowire-based swimmers consisting of a bimetallic head linked to a polypyrrole flexible tail or flagellum (Fig. 4(A)). When the swimmer is at resonance, propulsion of the nanowire by means of a propagating wave is observed. Figure 4(B) shows a sequence of the swimmer moving through water containing polystyrene microbeads under a traveling wave. Acoustic manipulation can also be achieved by acoustic streaming, which allows capturing structures by an acoustically generated streaming vortex. Based on this, Ahmed et al. demonstrated the acoustically triggered propulsion of microstructures containing a trapped bubble in an engineered microcavity [53] (Fig. 4(C)). When subject to ultrasound at the conditions of the bubble’s resonance frequency, the bubble is at its maximum oscillation amplitude. Consequently, a pair of counter-rotating vortices is generated in the surrounding fluid, creating a steady flow, known as acoustic microstreaming, which ultimately results in the propulsion of the swimmers.
There are virtually no restrictions in the type of material that could be manipulated using acoustic fields, the complexity rather lies in the design of the architecture, in other words, dissimilar density of the different parts composing the swimmer or their shape anisotropy [54]. Indeed, researchers have been able to produce composite materials consisting of different types of particles (e.g., ceramic, metallic, polymeric) organized in 1-D and 2-D arrangements by means of ultrasound [51].
Recently, Mallouk and co-workers have recently reported on a wafer-scale manufacturing approach for the fabrication of bubble-based micro- and nanoswimmers (Fig. 4(D)). The swimmers consisted of cup-shaped architectures made of polysterene. Briefly, polystyrene beads of different sizes were spin coated on wafer substrates. By means of reactive ion etching, it was possible to generate holes of different dimensions and shapes (conical or cylindrical), changing the etching pressure and plasma power. Depending on the shape and volume resonances, the trajectories of groups of swimmers could be adjusted. Figure 4(E) shows a 3-µm microrobot moving in a spiral path. Fischer and co-workers have shown that functional acoustic surfaces can be used for a multiple-degree-of-freedom wireless actuation [55]. Figure 4(F) shows the schematics of the bubble array surfaces. The surfaces were created by means of photolithography of SU-8 photocurable resin. When bubbles are at resonance, streaming of the surrounding liquid is generated at the bubble array surface, which results in a propulsion force acting on the opposite site. The surfaces can be integrated in millimeter-scale devices, such as the rotary motor shown in Fig. 4(G). He’s group has recently reported the acoustic propulsion of liquid-alloy colloidal nanorods [56]. Interestingly, the 1-µm nanorods were fabricated by means of acoustic crushing of the liquid metal in a fluid. The nanorods were manipulated using standing waves and displayed a directional motion along their long axis. The nanorods also displayed photoluminescence and were tested for their biocompatibility features with intracranial glioblastoma cells.
Magnetically Driven Small-Scale Robots
Magnetic fields are arguably the most adopted form of energy for the propulsion of micro- and nanorobots. Magnetic fields can be applied in form of gradients, oscillating or rotating magnetic fields by means of magnets or electromagnetic coils. The richness in the way magnetic fields can be applied together with their biocompatible characteristics (i.e., low or null interaction with organic matter within a wide range of magnetic field and frequency values) makes this approach very attractive especially for biomedical applications. Additionally, there exists a wealth of possibilities in terms of magnetically responsive materials (diamagnetic, ferro- and ferrimagnetic, paramagnetic), which today can be constructed in very complex shapes. A relatively simple way of manipulating magnetic micro- and nanostructures consists of using gradients, which allows for exerting forces on structures. Figure 5 shows 3D-printed porous spherical microrobots carrying cells being driven by means of magnetic field gradients in vitro and in vivo inside a zebrafish embryo [57]. The robots consisted of a polymeric chassis coated with a ferromagnetic material (nickel) and titanium for biocompatibility.
Rotating and oscillating magnetic fields have also been used to propel magnetic micro- and nanostructures. As magnetic materials exhibit an easy magnetization axis mainly induced by the shape (shape anisotropy), structures can rotate by aligning synchronously this preferential magnetization axis with the applied rotating (or oscillating) magnetic field caused by the exerted magnetic torque. Thus, by controlling the frequency of the rotating or the oscillating magnetic fields, it is possible to control the speed of the magnetic small-scale swimmers up to a certain frequency value, known as step-out frequency. Above this value, magnetic structures are not able to reorient fast enough with the magnetic fields and their speed is then reduced upon increasing further the frequency. Using rotating magnetic fields and depending on the specific geometrical shape of the swimmer, it is possible different types of locomotion. A very simple approach consists of manipulating structures such as spheres, nanowires, or more complex architectures that under the action of a rotating magnetic field can tumble or roll next to a surface. Figure 5(D) shows hard-ferromagnetic nanowires being manipulated over a substrate. The nanowires exhibit different behaviors as a function of the applied magnetic field frequency from tumbling and precession motion at low and medium frequencies, to rolling at higher frequencies, respectively [58]. With more complex structures, such as hinged nanowire-based swimmers, it is also possible to achieve helical motion. Recently, Wu et al. have shown that hinged structures consisting of a metallic tail linked to a magnetic head can swim describing helical paths under purely rotating magnetic fields [59]. The structures mimic the helical klinotactic motion of certain bacteria and cells such as spermatozoa. Rotating magnetic fields have been widely employed to study the locomotion of one of the most explored small-scale robotic architectures: helical micro- and nanorobots [60, 61]. Under rotating magnetic fields, these architectures are able to display a corkscrew mechanism that mimics the propulsion mechanism of certain flagellated microorganisms such as bacteria. Helical small-scale robots either consist of a magnetic head with a helical tail [62]; are comprised of a non-magnetic helical body conformally coated by a magnetic layer [60, 63,64,65]; or are made of a fully magnetic material (i.e., metal, alloy, magnetic polymer composite) [66, 67]. In the latter, careful attention must be paid to the material design. In principle, the preferential magnetization axis of a fully magnetic helical structure is along its long axis. This means that when applying a rotating magnetic field, the structure would not corkscrew but tumble. By programming the easy magnetization direction of the helical structure through its short axis, it is possible to achieve a corkscrew locomotion with fully magnetic bodies [67, 68]. Two strategies exist: (a) by pre-magnetizing a hard-magnetic helix along its short axis [68] or (b) by manufacturing helices using magnetic nanocomposites in which magnetic nanoparticles are aligned parallel to the helix short axis [69]. Figure 6(A) and (B) show different hard-magnetic and magnetic nanocomposite helical designs [68][69].
Using oscillating fields, interesting locomotion mechanisms can also be achieved. For example, Nelson, Or, Pané, and co-workers showed that by applying oscillating fields to hinged nanowire-based structures consisting of a flexible tail and a magnetic head, it is possible to emulate the swimming mechanism of eukaryotic cells [70]. Figures 6 (C) and (D) show that by increasing the number of hinges, it is possible to achieve a more defined traveling wave, which allows for a more effective propulsion of the assembly. Wang and co-workers demonstrated another interesting propulsion mechanism similar to the locomotion of fishes with similar hinged nanowire-based architectures [71]. The same team also demonstrated free-style swimming with a nanorobotic system containing two magnetic nanoarms [72].
Most magnetically propelled micro- and nanorobots have been made with ferromagnetic, ferrimagnetic or superparamagnetic materials, either in metal, alloy or polymer composite form. An exhaustive review has been recently published regarding this type of swimmers by Pumera, Zhang, and Pané [34••]. Here, we will briefly discuss some few recent achievements in the field, which we consider unprecedented in terms of their fabrication approach. For example, Magdanz et al. [29] have lately reported on the fabrication of sperm-template microrobots and the impact of the segmented magnetization on their propulsion. Electrostatic self-assembly of magnetic nanoparticles on nonmotile sperm cells was used to fabricate the hybrid microswimmers [31]. The conducted analysis on their motion under oscillating magnetic fields showed that the microrobots were able to swim by traveling waves. Yet, the shape of the generated waves was dependent on the magnetized cellular segments, subsequently affecting the fluid response and the propulsive thrust. Chen and co-workers have recently described a fabrication sequence comprising melt electrospinning, micromolding, and skiving in order to manufacture polycaprolactone/magnetite composite-based tadpole-like microrobots [73]. Figures 6 (E) and (F) show the fabrication scheme of these devices and the motion of the swimmer as a function of the rotating magnetic field. The microrobots were able to roll or propel. Transportation of several cargoes was also demonstrated. Choi and co-workers have developed 3D porous magnetic helical microrobots [74] (Fig. 6 (G)). The devices were fabricated by two-photon polymerization. Owing to the high surface area of the swimmers’ architecture, it was possible to load the device with drug. Additionally, ultrasound-assisted drug release was achieved thanks to the porosity structure of the swimmers’ chassis. By adjusting the acoustic field conditions, three modes of release were identified: natural, burst, and constant. Sitti and co-workers have recently reported on voxelated 3D small-scale magnetic soft machines by means of jig-assisted assembly [75]. Figure 6(H) shows a schematic of the process in which a 3D ring is created. Figure 6(H) also shows the manufacturing of the jigs, which contains permanent magnets to assist the assembly of the magnetic and nonmagnetic components. A ring and two half rings are sequentially plugged on the 3D jig to form the 3D ring. Pané and co-workers have demonstrated a template-assisted process to fabricate 3D micromachines consisting of mechanically interlocked magnetic hard 3D components made of electroplated iron with mold-casted 3D soft polymeric structures [17]. Figure 7(A) shows a schematic of the approach. Briefly, a photocurable polymer layer is deposited on a conductive substrate. Different 3D paths are then formed by direct laser writing. Those paths that reach the conductive substrate allow for electrodeposition of materials, while those that do not access the substrate allow for mold casting a polymer or another material. Figure 7(B) shows different mechanically interlocked metal–organic micromachines made of 3D parts of iron and different polymers. Multiple locomotion strategies such as tumbling or rolling with complex structures were possible as shown in Fig. 7 (C). Puigmartí, Pané, and co-workers have recently reported on the realization of millimeter-scale magnetic sugar-based helical swimmers by means of selective laser sintering [76]. Owing to the fast degradability of sugar structures, these devices could be used for rapid interventions in which a fast dissolution of the robot is needed. Figure 7(D) shows a batch of 3D-printed barium ferrite@sucrose helical swimmers and sequence of its motion under low rotating magnetic fields in silicon oil. Interestingly, the study also included a study on the mechanical properties of sugar-printed structures as a function of their level of caramelization.
Conclusions
The field of small-scale robots is facing grand challenges for their practical use in several applications, especially in the area of biomedicine. A defying yet exciting endeavor is to identify suitable materials and fabrication schemes that can generate highly integrated micro- and nanorobots specifically designed for a set of tasks and fulfill all the requirements for a targeted application. Material science and chemistry have greatly contributed to narrow the challenges for the translation of small-scale robotic technologies from the bench to the real world. The extensive buffet of materials and fabrication approaches is there, and it is constantly growing. Now, the community of small-scale roboticists must concentrate their efforts in finding the most suitable applications.
Change history
06 March 2022
The original version of this paper was updated to add the missing compact agreement Open Access funding note.
References
Papers of particular interest, published recently, have been highlighted as: • Of importance •• Of major importance
Nelson BJ, Kaliakatsos IK, Abbott JJ. Microrobots for minimally invasive medicine. Annu Rev Biomed Eng. 2010;12:55–85. https://doi.org/10.1146/annurev-bioeng-010510-103409.
Chen X-Z, Jang B, Ahmed D, Hu C, De Marco C, Hoop M, Mushtaq F, Nelson BJ, Pané S. Small-Scale Machines Driven by External Power Sources. Adv Mater. 2018;30:1705061. https://doi.org/10.1002/adma.201705061.
Li J, Esteban-Fernández de Ávila B, Gao W, Zhang L, Wang J. Micro/nanorobots for biomedicine: Delivery, surgery, sensing, and detoxification. Sci Robot. 2017;2:eaam6431. https://doi.org/10.1126/scirobotics.aam6431.
• Medina-Sánchez M, Schmidt OG. Medical microbots need better imaging and control. Nature. 2017;545:406–8. https://doi.org/10.1038/545406a. An excellent overview of the requirements of putting microrobots into medical practice.
Peyer KE, Zhang L, Nelson BJ. Bio-inspired magnetic swimming microrobots for biomedical applications. Nanoscale. 2013;5:1259–72. https://doi.org/10.1039/C2NR32554C.
Sánchez S, Soler L, Katuri J. Chemically Powered Micro- and Nanomotors. Angew Chemie Int Ed. 2015;54:1414–44. https://doi.org/10.1002/anie.201406096.
Wang H, Pumera M. Fabrication of Micro/Nanoscale Motors. Chem Rev. 2015;115:8704–35. https://doi.org/10.1021/acs.chemrev.5b00047.
Wang W, Duan W, Ahmed S, Sen A, Mallouk TE. From One to Many: Dynamic Assembly and Collective Behavior of Self-Propelled Colloidal Motors. Acc Chem Res. 2015;48:1938–46. https://doi.org/10.1021/acs.accounts.5b00025.
Katuri J, Ma X, Stanton MM, Sánchez S. Designing Micro- and Nanoswimmers for Specific Applications. Acc Chem Res. 2017;50:2–11. https://doi.org/10.1021/acs.accounts.6b00386.
Gao W, Wang J. The Environmental Impact of Micro/Nanomachines: A Review. ACS Nano. 2014;8:3170–80. https://doi.org/10.1021/nn500077a.
Mushtaq F, Chen X, Staufert S, Torlakcik H, Wang X, Hoop M, Gerber A, Li X, Cai J, Nelson BJ, Pané S. On-the-fly catalytic degradation of organic pollutants using magneto-photoresponsive bacteria-templated microcleaners. J Mater Chem A. 2019;7:24847–56. https://doi.org/10.1039/C9TA06290D.
Yan X, Zhou Q, Vincent M, Deng Y, Yu J, Xu J, Xu T, Tang T, Bian L, Wang Y-XJ, Kostarelos K, Zhang L. Multifunctional biohybrid magnetite microrobots for imaging-guided therapy. Sci Robot. 2017;2:eaaq1155. https://doi.org/10.1126/scirobotics.aaq1155.
Felfoul O, Mohammadi M, Taherkhani S, de Lanauze D, Zhong XuY, Loghin D, Essa S, Jancik S, Houle D, Lafleur M, Gaboury L, Tabrizian M, Kaou N, Atkin M, Vuong T, Batist G, Beauchemin N, Radzioch D, Martel S. Magneto-aerotactic bacteria deliver drug-containing nanoliposomes to tumour hypoxic regions. Nat Nanotechnol. 2016;11:941–7. https://doi.org/10.1038/nnano.2016.137.
Servant A, Qiu F, Mazza M, Kostarelos K, Nelson BJ. Controlled In Vivo Swimming of a Swarm of Bacteria-Like Microrobotic Flagella. Adv Mater. 2015;27:2981–8. https://doi.org/10.1002/adma.201404444.
Xu H, Medina-Sánchez M, Magdanz V, Schwarz L, Hebenstreit F, Schmidt OG. Sperm-Hybrid Micromotor for Targeted Drug Delivery. ACS Nano. 2018;12:327–37. https://doi.org/10.1021/acsnano.7b06398.
Wang B, Chan KF, Yuan K, Wang Q, Xia X, Yang L, Ko H, Wang Y-XJ, Sung JJY, Chiu PWY, Zhang L. Endoscopy-assisted magnetic navigation of biohybrid soft microrobots with rapid endoluminal delivery and imaging. Sci Robot. 2021;6:eabd2813. https://doi.org/10.1126/scirobotics.abd2813.
Alcântara CCJ, Landers FC, Kim S, De Marco C, Ahmed D, Nelson BJ, Pané S. Mechanically interlocked 3D multi-material micromachines. Nat Commun. 2020;11:5957. https://doi.org/10.1038/s41467-020-19725-6.
Muñoz-Rojas D, MacManus-Driscoll J. Spatial atmospheric atomic layer deposition: a new laboratory and industrial tool for low-cost photovoltaics. Mater Horizons. 2014;1:314–20. https://doi.org/10.1039/C3MH00136A.
Hu C, Aeschlimann F, Chatzipirpiridis G, Pokki J, Chen X, Puigmarti-Luis J, Nelson BJ, Pané S. Spatiotemporally controlled electrodeposition of magnetically driven micromachines based on the inverse opal architecture. Electrochem commun. 2017;81:97–101. https://doi.org/10.1016/j.elecom.2017.06.012.
Benedetto A, Accetta G, Fujita Y, Charras G. Spatiotemporal control of gene expression using microfluidics. Lab Chip. 2014;14:1336–47. https://doi.org/10.1039/C3LC51281A.
Thakur R, Zhang Y, Amin A, Wereley S. Programmable microfluidic platform for spatiotemporal control over nanoliter droplets. Microfluid Nanofluidics. 2015;18:1425–31. https://doi.org/10.1007/s10404-014-1507-7.
Freeman FE, Pitacco P, van Dommelen LHA, Nulty J, Browe DC, Shin J-Y, Alsberg E, Kelly DJ. 3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration. Sci Adv. 2020;6:abb5093. https://doi.org/10.1126/sciadv.abb5093.
Happel J, Brenner H. Low Reynolds number hydrodynamics. Netherlands: Springer; 1983.
Sangtae Kim SJK. Microhydrodynamics: Principles and selected applications. Boston, MA: Butterworth-Heinemann; 1991.
Hinch EJ (1988) Hydrodynamics at low Reynolds numbers: A brief and elementary introduction bt - disorder and mixing: convection, diffusion and reaction in random materials and processes. In: Guyon E, Nadal J-P, Pomeau Y (eds). Springer Netherlands, Dordrecht, pp 43–56
Purcell EM. Life at low Reynolds number. Am J Phys. 1977;45:3–11. https://doi.org/10.1119/1.10903.
Nitsche LC (1994) Microhydrodynamics: Principles and selected applications. By Sangtae Kim and Seppo J. Karrila, Butterworth-Heinemann, Boston, 1991, 507 +xxiii pp., $69.95. AIChE J 40:739–743https://doi.org/10.1002/aic.690400418
Lauga E, Powers TR. The hydrodynamics of swimming microorganisms. Reports Prog Phys. 2009;72:96601. https://doi.org/10.1088/0034-4885/72/9/096601.
Magdanz V, Vivaldi J, Mohanty S, Klingner A, Vendittelli M, Simmchen J, Misra S, Khalil ISM. Impact of Segmented Magnetization on the Flagellar Propulsion of Sperm-Templated Microrobots. Adv Sci. 2021;8:2004037. https://doi.org/10.1002/advs.202004037.
Berg HC, Anderson RA. Bacteria Swim by Rotating their Flagellar Filaments. Nature. 1973;245:380–2. https://doi.org/10.1038/245380a0.
Magdanz V, Khalil ISM, Simmchen J, Furtado GP, Mohanty S, Gebauer J, Xu H, Klingner A, Aziz A, Medina-Sánchez M, Schmidt OG, Misra S. IRONSperm: Sperm-templated soft magnetic microrobots. Sci Adv. 2020;6:eaba5855. https://doi.org/10.1126/sciadv.aba5855.
Ahmed D, Baasch T, Blondel N, Läubli N, Dual J, Nelson BJ. Neutrophil-inspired propulsion in a combined acoustic and magnetic field. Nat Commun. 2017;8:770. https://doi.org/10.1038/s41467-017-00845-5.
Pilz da Cunha M, Debije MG, Schenning APHJ. Bioinspired light-driven soft robots based on liquid crystal polymers. Chem Soc Rev. 2020;49:6568–78. https://doi.org/10.1039/D0CS00363H.
•• Zhou H, Mayorga-Martinez CC, Pané S, Zhang L, Pumera M. Magnetically Driven Micro and Nanorobots. Chem Rev. 2021;121:4999–5041. https://doi.org/10.1021/acs.chemrev.0c01234. An excellent overview of magnetically driven microrobots.
Shishido T, Teramura K, Tanaka T. A unique photo-activation mechanism by “in situ doping” for photo-assisted selective NO reduction with ammonia over TiO2 and photooxidation of alcohols over Nb2O5. Catal Sci Technol. 2011;1:541–51. https://doi.org/10.1039/C1CY00104C.
Jang B, Hong A, Kang HE, Alcantara C, Charreyron S, Mushtaq F, Pellicer E, Büchel R, Sort J, Lee SS, Nelson BJ, Pané S. Multiwavelength Light-Responsive Au/B-TiO2 Janus Micromotors. ACS Nano. 2017;11:6146–54. https://doi.org/10.1021/acsnano.7b02177.
Palacci J, Sacanna S, Kim S-H, Yi G-R, Pine DJ, Chaikin PM. Light-activated self-propelled colloids. Philos Trans R Soc A Math Phys Eng Sci. 2014;372:20130372. https://doi.org/10.1098/rsta.2013.0372.
Mou F, Li Y, Chen C, Li W, Yin Y, Ma H, Guan J. Single-Component TiO2 Tubular Microengines with Motion Controlled by Light-Induced Bubbles. Small. 2015;11:2564–70. https://doi.org/10.1002/smll.201403372.
Dai B, Wang J, Xiong Z, Zhan X, Dai W, Li C-C, Feng S-P, Tang J. Programmable artificial phototactic microswimmer. Nat Nanotechnol. 2016;11:1087–92. https://doi.org/10.1038/nnano.2016.187.
Wang Q, Dong R, Wang C, Xu S, Chen D, Liang Y, Ren B, Gao W, Cai Y. Glucose-Fueled Micromotors with Highly Efficient Visible-Light Photocatalytic Propulsion. ACS Appl Mater Interfaces. 2019;11:6201–7. https://doi.org/10.1021/acsami.8b17563.
Schlomberg H, Kröger J, Savasci G, Terban MW, Bette S, Moudrakovski I, Duppel V, Podjaski F, Siegel R, Senker J, Dinnebier RE, Ochsenfeld C, Lotsch BV. Structural Insights into Poly(Heptazine Imides): A Light-Storing Carbon Nitride Material for Dark Photocatalysis. Chem Mater. 2019;31:7478–86. https://doi.org/10.1021/acs.chemmater.9b02199.
Yuan K, de la Asunción-Nadal V, Jurado-Sánchez B, Escarpa A. 2D Nanomaterials Wrapped Janus Micromotors with Built-in Multiengines for Bubble, Magnetic, and Light Driven Propulsion. Chem Mater. 2020;32:1983–92. https://doi.org/10.1021/acs.chemmater.9b04873.
Kutorglo EM, Elashnikov R, Rimpelova S, Ulbrich P, Říhová Ambrožová J, Svorcik V, Lyutakov O. Polypyrrole-Based Nanorobots Powered by Light and Glucose for Pollutant Degradation in Water. ACS Appl Mater Interfaces. 2021;13:16173–81. https://doi.org/10.1021/acsami.0c20055.
Huang C, Lv J, Tian X, Wang Y, Yu Y, Liu J. Miniaturized Swimming Soft Robot with Complex Movement Actuated and Controlled by Remote Light Signals. Sci Rep. 2015;5:17414. https://doi.org/10.1038/srep17414.
Palagi S, Mark AG, Reigh SY, Melde K, Qiu T, Zeng H, Parmeggiani C, Martella D, Sanchez-Castillo A, Kapernaum N, Giesselmann F, Wiersma DS, Lauga E, Fischer P. Structured light enables biomimetic swimming and versatile locomotion of photoresponsive soft microrobots. Nat Mater. 2016;15:647–53. https://doi.org/10.1038/nmat4569.
Zhan Z, Wei F, Zheng J, Yang W, Luo J, Yao L. Recent advances of light-driven micro/nanomotors: toward powerful thrust and precise control. Nanotechnol Rev. 2018;7:555–81. https://doi.org/10.1515/ntrev-2018-0106.
Cheng Y-C, Lu H-C, Lee X, Zeng H, Priimagi A. Kirigami-Based Light-Induced Shape-Morphing and Locomotion. Adv Mater. 2020;32:1906233. https://doi.org/10.1002/adma.201906233.
Xuan M, Wu Z, Shao J, Dai L, Si T, He Q. Near Infrared Light-Powered Janus Mesoporous Silica Nanoparticle Motors. J Am Chem Soc. 2016;138:6492–7. https://doi.org/10.1021/jacs.6b00902.
Liu S, Lin L, Sun H-B. Opto-Thermophoretic Manipulation. ACS Nano. 2021;15:5925–43. https://doi.org/10.1021/acsnano.0c10427.
• Leal-Estrada M, Valdez-Garduño M, Soto F, Garcia-Gradilla V. Engineering Ultrasound Fields to Power Medical Micro/Nanorobots. Curr Robot Reports. 2021;2:21–32. https://doi.org/10.1007/s43154-020-00033-2. (An excellent guide for building ultrasounic fields for actuating microrobots.)
Meng L, Cai F, Li F, Zhou W, Niu L, Zheng H. Acoustic tweezers. J Phys D Appl Phys. 2019;52:273001. https://doi.org/10.1088/1361-6463/ab16b5.
Ahmed D, Baasch T, Jang B, Pane S, Dual J, Nelson BJ. Artificial Swimmers Propelled by Acoustically Activated Flagella. Nano Lett. 2016;16:4968–74. https://doi.org/10.1021/acs.nanolett.6b01601.
Ahmed D, Lu M, Nourhani A, Lammert PE, Stratton Z, Muddana HS, Crespi VH, Huang TJ. Selectively manipulable acoustic-powered microswimmers. Sci Rep. 2015;5:9744. https://doi.org/10.1038/srep09744.
Mohanty S, Khalil ISM, Misra S. Contactless acoustic micro/nano manipulation: a paradigm for next generation applications in life sciences. Proc R Soc A Math Phys Eng Sci. 2020;476:20200621. https://doi.org/10.1098/rspa.2020.0621.
Qiu T, Palagi S, Mark AG, Melde K, Adams F, Fischer P. Wireless actuation with functional acoustic surfaces. Appl Phys Lett. 2016;109:191602. https://doi.org/10.1063/1.4967194.
Li Z, Zhang H, Wu Z, He Q (2021) Acoustically-Propelled Rodlike Liquid Metal Colloidal Motors.ChemNanoMat n/ahttps://doi.org/10.1002/cnma.202100143
Li J, Li X, Luo T, Wang R, Liu C, Chen S, Li D, Yue J, Cheng S, Sun D. Development of a magnetic microrobot for carrying and delivering targeted cells. Sci Robot. 2018;3:eaat8829. https://doi.org/10.1126/scirobotics.aat8829.
Jang B, Hong A, Alcantara C, Chatzipirpiridis G, Martí X, Pellicer E, Sort J, Harduf Y, Or Y, Nelson BJ, Pané S. Programmable Locomotion Mechanisms of Nanowires with Semihard Magnetic Properties Near a Surface Boundary. ACS Appl Mater Interfaces. 2019;11:3214–23. https://doi.org/10.1021/acsami.8b16907.
Wu J, Jang B, Harduf Y, Chapnik Z, Avci ÖB, Chen X, Puigmartí-Luis J, Ergeneman O, Nelson BJ, Or Y, Pané S. Helical Klinotactic Locomotion of Two-Link Nanoswimmers with Dual-Function Drug-Loaded Soft Polysaccharide Hinges. Adv Sci. 2021;8:2004458. https://doi.org/10.1002/advs.202004458.
Tottori S, Zhang L, Qiu F, Krawczyk KK, Franco-Obregón A, Nelson BJ. Magnetic Helical Micromachines: Fabrication, Controlled Swimming, and Cargo Transport. Adv Mater. 2012;24:811–6. https://doi.org/10.1002/adma.201103818.
Chen X-Z, Hoop M, Mushtaq F, Siringil E, Hu C, Nelson BJ, Pané S. Recent developments in magnetically driven micro- and nanorobots. Appl Mater Today. 2017;9:37–48. https://doi.org/10.1016/j.apmt.2017.04.006.
Zeeshan MA, Grisch R, Pellicer E, Sivaraman KM, Peyer KE, Sort J, Özkale B, Sakar MS, Nelson BJ, Pané S. Hybrid Helical Magnetic Microrobots Obtained by 3D Template-Assisted Electrodeposition. Small. 2014;10:1284–8. https://doi.org/10.1002/smll.201302856.
Wang X, Qin X-H, Hu C, Terzopoulou A, Chen X-Z, Huang T-Y, Maniura-Weber K, Pané S, Nelson BJ. 3D Printed Enzymatically Biodegradable Soft Helical Microswimmers. Adv Funct Mater. 2018;28:1804107. https://doi.org/10.1002/adfm.201804107.
Dong M, Wang X, Chen X-Z, Mushtaq F, Deng S, Zhu C, Torlakcik H, Terzopoulou A, Qin X-H, Xiao X, Puigmartí-Luis J, Choi H, Pêgo AP, Shen Q-D, Nelson BJ, Pané S. 3D-Printed Soft Magnetoelectric Microswimmers for Delivery and Differentiation of Neuron-Like Cells. Adv Funct Mater. 2020;30:1910323. https://doi.org/10.1002/adfm.201910323.
Wang X, Chen X-Z, Alcântara CCJ, Sevim S, Hoop M, Terzopoulou A, de Marco C, Hu C, de Mello AJ, Falcaro P, Furukawa S, Nelson BJ, Puigmartí-Luis J, Pané S. MOFBOTS: Metal–Organic-Framework-Based Biomedical Microrobots. Adv Mater. 2019;31:1901592. https://doi.org/10.1002/adma.201901592.
Peters C, Hoop M, Pané S, Nelson BJ, Hierold C. Degradable Magnetic Composites for Minimally Invasive Interventions: Device Fabrication, Targeted Drug Delivery, and Cytotoxicity Tests. Adv Mater. 2016;28:533–8. https://doi.org/10.1002/adma.201503112.
Alcântara CCJ, Kim S, Lee S, Jang B, Thakolkaran P, Kim J-Y, Choi H, Nelson BJ, Pané S. 3D Fabrication of Fully Iron Magnetic Microrobots. Small. 2019;15:1805006. https://doi.org/10.1002/smll.201805006.
Chatzipirpiridis G, de Marco C, Pellicer E, Ergeneman O, Sort J, Nelson BJ, Pané S. Template-Assisted Electroforming of Fully Semi-Hard-Magnetic Helical Microactuators. Adv Eng Mater. 2018;20:1800179. https://doi.org/10.1002/adem.201800179.
Peters C, Ergeneman O, García PDW, Müller M, Pané S, Nelson BJ, Hierold C. Superparamagnetic Twist-Type Actuators with Shape-Independent Magnetic Properties and Surface Functionalization for Advanced Biomedical Applications. Adv Funct Mater. 2014;24:5269–76. https://doi.org/10.1002/adfm.201400596.
Jang B, Gutman E, Stucki N, Seitz BF, Wendel-García PD, Newton T, Pokki J, Ergeneman O, Pané S, Or Y, Nelson BJ. Undulatory Locomotion of Magnetic Multilink Nanoswimmers. Nano Lett. 2015;15:4829–33. https://doi.org/10.1021/acs.nanolett.5b01981.
Li J, Sattayasamitsathit S, Dong R, Gao W, Tam R, Feng X, Ai S, Wang J. Template electrosynthesis of tailored-made helical nanoswimmers. Nanoscale. 2014;6:9415–20. https://doi.org/10.1039/C3NR04760A.
Li J, Li T, Xu T, Kiristi M, Liu W, Wu Z, Wang J. Magneto-Acoustic Hybrid Nanomotor. Nano Lett. 2015;15:4814–21. https://doi.org/10.1021/acs.nanolett.5b01945.
Su Y, Qiu T, Song W, Han X, Sun M, Wang Z, Xie H, Dong M, Chen M. Melt Electrospinning Writing of Magnetic Microrobots. Adv Sci. 2021;8:2003177. https://doi.org/10.1002/advs.202003177.
Park J, Kim J, Pané S, Nelson BJ, Choi H. Acoustically Mediated Controlled Drug Release and Targeted Therapy with Degradable 3D Porous Magnetic Microrobots. Adv Healthc Mater. 2020;10:2001096. https://doi.org/10.1002/adhm.202001096.
Zhang J, Ren Z, Hu W, Soon RH, Yasa IC, Liu Z, Sitti M. Voxelated three-dimensional miniature magnetic soft machines via multimaterial heterogeneous assembly. Sci Robot. 2021;6:eabf0112. https://doi.org/10.1126/scirobotics.abf0112.
Gervasoni S, Terzopoulou A, Franco C, Veciana A, Pedrini N, Burri JT, de Marco C, Siringil EC, Chen X-Z, Nelson BJ, Puigmartí-Luis J, Pané S. CANDYBOTS: A New Generation of 3D-Printed Sugar-Based Transient Small-Scale Robots. Adv Mater. 2020;32:2005652. https://doi.org/10.1002/adma.202005652.
Sridhar V, Podjaski F, Kröger J, Jiménez-Solano A, Park B-W, Lotsch BV, Sitti M. Carbon nitride-based light-driven microswimmers with intrinsic photocharging ability. Proc Natl Acad Sci. 2020;117:24748 LP – 24756. https://doi.org/10.1073/pnas.2007362117.
Ahmed S, Gentekos DT, Fink CA, Mallouk TE. Self-Assembly of Nanorod Motors into Geometrically Regular Multimers and Their Propulsion by Ultrasound. ACS Nano. 2014;8:11053–60. https://doi.org/10.1021/nn5039614.
McNeill JM, Nama N, Braxton JM, Mallouk TE. Wafer-Scale Fabrication of Micro- to Nanoscale Bubble Swimmers and Their Fast Autonomous Propulsion by Ultrasound. ACS Nano. 2020;14:7520–8. https://doi.org/10.1021/acsnano.0c03311.
Acknowledgements
SP and JPL acknowledge funding from a Consolidator Grant and a Starting Grant from the European Research Council (ERC), respectively (Grant Agreements 771565, 677020). This work was also supported by H2020-EIC-FETPROACT-2019 (Grant Agreement No. 952152) and the Spanish MINECO (project PID2020-116612RB-C33). Open access funding provided by Swiss Federal Institute of Technology Zurich.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of Interest
The authors declare that they have no conflict of interest.
Human and Animal Rights and Informed Consent
This article does not contain any studies with human or animal subjects performed by any of the authors.
Additional information
This article is part of the Topical Collection on Nanorobotics and Microrobotics
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Pané, S., Wendel-Garcia, P., Belce, Y. et al. Powering and Fabrication of Small-Scale Robotics Systems. Curr Robot Rep 2, 427–440 (2021). https://doi.org/10.1007/s43154-021-00066-1
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s43154-021-00066-1