Abstract
Taking the 2130 cold rolling production line of a steel mill as the research object, feature dimensionality reduction and decoupling processing were realized by fusing random forest and factor analysis, which reduced the generation of weak decision trees while ensured its diversity. The base learner used a weighted voting mechanism to replace the traditional average method, which improved the prediction accuracy. Finally, the analysis method of the correlation between steel grades was proposed to solve the problem of unstable prediction accuracy of multiple steel grades. The experimental results show that the improved prediction model of mechanical properties has high accuracy: the prediction accuracy of yield strength and tensile strength within the error of ± 20 MPa reaches 93.20% and 97.62%, respectively, and that of the elongation rate under the error of ± 5% has reached 96.60%.
Similar content being viewed by others
References
L. Wang, D. Tang, Y. Song, Iron and Steel 51 (2016) No. 11, 73–78.
J. Ghaisari, H. Jannesari, M. Vatani, Adv. Eng. Software 45 (2012) 91–99.
J.J. Zhi, K.W. Huang, Z.H. Tian, N. Xu, Baosteel Technology (2007) No. 6, 69–72+80.
E. Evin, J. Kepič, K. Buriková, M. Tomáš, Metals 8 (2018) 242.
H.N. Han, J.K. Lee, H.J. Kim, Y.S. Jin, J. Mater. Process. Technol. 128 (2002) 216–225.
H.N. Han, C.G. Lee, C.S. Oh, T.H. Lee, S.J. Kim, Acta Mater. 52 (2004) 5203–5214.
C. Şimşir, C.H. Gür, Comput. Mater. Sci. 44 (2008) 588–600.
O.S. Khlybov, Metallurgist 64 (2020) 356–361.
V.F. Terent'ev, O.V. Rybal'chenko, A.S. Baikin, M.A. Kaplan, V.P. Sirotinkin, L.I. Kobeleva, Russ. Metall. 2020 (2020) 1225–1229.
S.H. Park, I.B. Lee, E. Lee, ISIJ Int. 60 (2020) 1737–1742.
A. Bhatt, M.B. Parappagoudar, Arch. Foundry Eng. 15 (2015) 5–12.
S.W. Wu, Z.Y. Liu, X.G. Zhou, N.A. Shi, J. Iron Steel Res. 28 (2016) 1–4.
S.X. Hu, W.G. Li, W. Yang, Journal of Wuhan University of Science and Technology 41 (2018) 338–344.
Y. Ma, X.P. Wang, S.S. Ma, Metallurgical Industry Automation 43 (2019) No. 2, 6–10.
Z.W. Xu, X.M. Liu, K. Zhang, IEEE Access 7 (2019) 47068–47078.
W.G. Li, W. Yang, Y.T. Zhao, H.F. Hu, J. Iron Steel Res. 30 (2018) 302–308.
S.W. Wu, G.M. Cao, X.G. Zhou, N.A. Shi, Z.Y. Liu, ISIJ Int. 57 (2017) 1213–1220.
S.W. Wu, X.G. Zhou, G.M. Cao, N.A. Shi, Z.Y. Liu, G.D. Wang, Iron and Steel 51 (2016) No. 5, 88–94+100.
X.G. Pan, D. Tang, Y. Song, Y.W. Xu, J. Univ. Sci. Technol. Beijing 35 (2013) 189–194.
Z.Y. Liu, G.M. Cao, X.G. Zhou, S.W. Wu, G.D. Wang, Steel Rolling 36 (2019) No. 2, 1–7.
G.D. Wang, X.H. Liu, Z.Y. Liu, Iron and Steel 42 (2007) No. 10, 1–5.
F. Scalzo, R. Hamilton, S. Asgari, S. Kim, X. Hu, Med. Eng. Phys. 34 (2012) 1058–1065.
Z.Y. Ou, H. Yamada, Computer Engineering and Design 39 (2018) 580–584.
J. Lyu, K.N. Wang, C.G. Li, T. Ma, Journal of Northwest Forestry University 31 (2016) No. 6, 264–267.
Q. He, N. Li, W.J. Luo, Z.Z. Shi, Pattern Recognition and Artificial Intelligence 27 (2014) 327–336.
K. Wang, J.X. Wang, Z.N. Xing, X. Han, Application Research of Computers 35 (2018) 3000–3002.
W.W. Zhao, Y.Y. Li, F.Q. Zhao, S.S. Wei, Journal of Jilin University (Science Edition) 55 (2017) 933–939.
H.M. Lin, Y. Wang, Statistical Research 24 (2007) No. 8, 77–83.
P.Y. Chou, J.T. Tsai, J.H. Chou, IEEE Access 4 (2017) 585–593.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no conflict of interest.
Rights and permissions
About this article
Cite this article
Zhao, Yb., Song, Y., Li, Ff. et al. Prediction of mechanical properties of cold rolled strip based on improved extreme random tree. J. Iron Steel Res. Int. 30, 293–304 (2023). https://doi.org/10.1007/s42243-022-00815-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42243-022-00815-2