Skip to main content
SpringerLink
Log in

Development of a Tribofidelic Human Heel Surrogate for Barefoot Slip Testing

  • Research Article
  • Published:
Journal of Bionic Engineering Aims and scope Submit manuscript

Abstract

Barefoot slips contribute to over 37% of recurrent fall-related injuries across all age groups. To study slip risk across a wide range of flooring conditions, slip meters with barefoot surrogates (i.e., sensors, as per ASTM standard nomenclature) such as animal skins and rubbers have been used to date, which exhibit biomechanical and frictional properties widely different from the barefoot human skin. Development of a surrogate which can accurately simulate the human heel skin properties would be immensely beneficial for realistic assessment of barefoot slipping risk. A novel surrogate was developed using 3D scanning and printing, and biomimetics, which precisely simulates the biomechanical and frictional properties of the barefoot human heel skin. Mechanical slip testing was conducted with this surrogate on three common bathroom floorings and with six different contaminants. Coefficient of Friction (COF) results similar to human slipping experiments, high repeatability and reproducibility across wet and oily flooring conditions, were confirmed through experiments with the developed heel skin surrogate. The heel skin surrogate would be an indispensable model for accurate estimation of barefoot risk against slips and falls in bathrooms, bathtubs, and swimming pools.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Besser, M., Marpet, M., & Medoff, H. (2008). Barefoot-pedestrian tribometry: In vivo method of measurement of available friction between the human heel and the walkway. Industrial Health, 46, 51–58. https://doi.org/10.2486/indhealth.46.51

    Article  Google Scholar 

  2. Short, A., & Cubitt, L. (2018). Slips, trips, and falls. Handbook of Human Motion (pp. 2417–2445). Springer.

    Chapter  Google Scholar 

  3. Lohman, M. C., Sonnega, J. A., Nicklett, E. J., Estenson, L., & Leggett, A. N. (2019). Comparing estimates of fall-related mortality incidence among older adults in the United States. The Journals of Gerontology: Series A, 74, 1468–1474.

    Article  Google Scholar 

  4. Di Pilla, S. (2016). Overseas Standards, Slip, trip, and fall prevention: A practical handbook (pp. 237–272). CRC Press.

    Book  Google Scholar 

  5. Jagnoor, J., Keay, L., Ganguli, A., Dandona, R., Thakur, J. S., Boufous, S., Cumming, R., & Ivers, R. Q. (2012). Fall related injuries: A retrospective medical review study in North India. Injury, 43, 1996–2000. https://doi.org/10.1016/j.injury.2011.08.004

    Article  Google Scholar 

  6. Pitchai, P., Dedhia, H. B., Bhandari, N., Krishnan, D., D’Souza, N. R. J., & Bellara, J. M. (2019). Prevalence, risk factors, circumstances for falls and level of functional independence among geriatric population—A descriptive study. Indian Journal Of Public Health, 63, 21–26. https://doi.org/10.4103/ijph.IJPH_332_17

    Article  Google Scholar 

  7. Kleiner, A. F. R., Galli, M., do Carmo, A. A., & Barros, R. M. (2015). Effects of flooring on required coefficient of friction: elderly adult vs. middle-aged adult barefoot gait. Applied Ergonomics, 50, 147–152. https://doi.org/10.1016/j.apergo.2015.02.010

    Article  Google Scholar 

  8. Derler, S., Huber, R., Feuz, H. P., & Hadad, M. (2009). Influence of surface microstructure on the sliding friction of plantar skin against hard substrates. Wear, 267, 1281–1288. https://doi.org/10.1016/j.wear.2008.12.053

    Article  Google Scholar 

  9. Li, K.W., & Wen, H.C. (2013). Friction between foot and floor under barefoot conditions: A pilot study. In: IEEE International Conference on Industrial Engineering and Engineering Management, 2013, Bangkok, Thailand, pp 1651–1655

  10. Nagata, H., Kato, M., Watanabe, H., Inoue, Y., & Kim, I. (2008). A preliminary study on slip potentials of stepping barefoot on slippery floors. Contemporary Ergonomics, 2008, 710–716.

    Google Scholar 

  11. Li, K. W., & Lin, C. C. (2013). Effects of floor material, surface condition, and foot moving speed on the coefficient of friction on the floor. Applied Mechanics and Materials, 303, 2704–2707. https://doi.org/10.4028/www.scientific.net/AMM.303-306.2704

    Article  Google Scholar 

  12. Siegmund, G. P., Flynn, J., Mang, D. W., Chimich, D. D., & Gardiner, J. C. (2010). Utilized friction when entering and exiting a dry and wet bathtub. Gait & Posture, 31, 473–478. https://doi.org/10.1016/j.gaitpost.2010.02.003

    Article  Google Scholar 

  13. Nagata, H., Watanabe, H., Inoue, Y., Kim, I.J. (2008). Fall risks and validities of various methods to measure frictional properties of slippery floors covered with soapsuds. In: Proceedings of the 17th World Congress on Ergonomics. Tokyo, Japan, 2008, pp 1–5.

  14. Iraqi, A., Cham, R., Redfern, M. S., Vidic, N. S., & Beschorner, K. E. (2018). Kinematics and kinetics of the shoe during human slips. Journal of Biomechanics, 74, 57–63. https://doi.org/10.1016/j.jbiomech.2018.04.018

    Article  Google Scholar 

  15. Chanda, A., & Unnikrishnan, V. (2018). Novel insole design for diabetic foot ulcer management. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232, 1182–1195. https://doi.org/10.1177/0954411918808330

    Article  Google Scholar 

  16. Singh, G., Gupta, S., & Chanda, A. (2021). Biomechanical modelling of diabetic foot ulcers: A computational study. Journal of Biomechanics, 127, 110699. https://doi.org/10.1016/j.jbiomech.2021.110699

    Article  Google Scholar 

  17. Gupta, S., Singh, G., & Chanda, A. (2021). Prediction of diabetic foot ulcer progression: A computational study. Biomedical Physics & Engineering Express, 7, 065020. https://doi.org/10.1088/2057-1976/ac29f3

    Article  Google Scholar 

  18. Iraqi, A., Cham, R., Redfern, M. S., & Beschorner, K. E. (2018). Coefficient of friction testing parameters influence the prediction of human slips. Applied Ergonomics, 70, 118–126. https://doi.org/10.1016/j.apergo.2018.02.017

    Article  Google Scholar 

  19. Chanda, A., Reuter, A., & Beschorner, K. E. (2019). Vinyl composite tile surrogate for mechanical slip testing. IISE Transactions on Occupational Ergonomics and Human Factors, 7, 132–141. https://doi.org/10.1080/24725838.2019.1637381

    Article  Google Scholar 

  20. Cook, A., Hemler, S., Sundaram, V., Chanda, A., & Beschorner, K. (2020). Differences in friction performance between new and worn shoes. IISE Transactions on Occupational Ergonomics and Human Factors, 8, 209–214. https://doi.org/10.1080/24725838.2021.1925998

    Article  Google Scholar 

  21. Chanda, A., & McClain, S. (2019). Mechanical modeling of healthy and diseased calcaneal fat pad surrogates. Biomimetics, 4, 1–14. https://doi.org/10.3390/biomimetics4010001

    Article  Google Scholar 

  22. Singh, G., & Chanda, A. (2021). Mechanical properties of whole-body soft human tissues: A review. Biomedical Materials, 16, 062004. https://doi.org/10.1088/1748-605X/ac2b7a

    Article  Google Scholar 

  23. Chanda, A., Jones, T. G., & Beschorner, K. E. (2018). Generalizability of footwear traction performance across flooring and contaminant conditions. IISE Transactions on Occupational Ergonomics and Human factors, 6, 98–108. https://doi.org/10.1080/24725838.2018.1517702

    Article  Google Scholar 

  24. Jing, D., & Bhushan, B. (2013). Quantification of surface charge density and its effect on boundary slip. Langmuir, 29, 6953–6963. https://doi.org/10.1021/la401168w

    Article  Google Scholar 

  25. Beschorner, K. E., Siegel, J. L., Hemler, S. L., Sundaram, V. H., Chanda, A., Iraqi, A., Haight, J. M., & Redfern, M. S. (2020). An observational ergonomic tool for assessing the worn condition of slip-resistant shoes. Applied Ergonomics, 88, 103140. https://doi.org/10.1016/j.apergo.2020.103140

    Article  Google Scholar 

  26. Sundaram, V. H., Hemler, S. L., Chanda, A., Haight, J. M., Redfern, M. S., & Beschorner, K. E. (2020). Worn region size of shoe outsole impacts human slips: Testing a mechanistic model. Journal of Biomechanics, 105, 109797. https://doi.org/10.1016/j.jbiomech.2020.109797

    Article  Google Scholar 

Download references

Funding

No funding was received for this work.

Author information

Authors and Affiliations

  1. Centre for Biomedical Engineering, Indian Institute of Technology Delhi, New Delhi, 110016, India

    Subhodip Chatterjee & Arnab Chanda

  2. Department of Biomedical Engineering, All India Institute of Medical Science, New Delhi, 110029, India

    Arnab Chanda

Authors
  1. Subhodip Chatterjee
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Arnab Chanda
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Arnab Chanda.

Ethics declarations

Conflict of Interest

The authors have no conflict or competing interests to disclose.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chatterjee, S., Chanda, A. Development of a Tribofidelic Human Heel Surrogate for Barefoot Slip Testing. J Bionic Eng 19, 429–439 (2022). https://doi.org/10.1007/s42235-021-00138-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s42235-021-00138-0

Keywords

Search

Navigation