Abstract
Design of efficient earthquake (EQ) resistant building is challenging task to earthquake engineers. The available methods for earthquake resistant design are complex and computationally expensive. Most accurate method for analysis is Time history analysis of the intended structure using real time ground motion data. This method is also difficult in practical cases as no realistic data for ground motion and sufficient computational facility are unavailable. Presently the application of Artificial Intelligence (AI) model in solving complex real type problem like earthquake analysis and design of structure. Available literature indicates a positive growing trend for EQ resistant design using AI. The application of AI model can reduce time and effort for making EQ resistant design efficiently. In this paper, some building with the validation for different type of EQ are considered and data generation has been done using ETABS software and EQ ground motion (EQGM) are considered in development of AI model for EQ resistant design, some important parameter of real EQGM such as Peak ground acceleration (PGA), Peak ground velocity (PGV), Peak ground displacement (PGD) and time duration as well as building parameter such as maximum displacement, base shear and story drift are considered. The developed feed forward back propagation ANN model could successfully predict design parameters of a typical target structures within a reasonable less time of computation. The save in computation time and less effort for this type of meta-heuristic approach may have huge research interest and application in EQ resistant design of structure.
Similar content being viewed by others
Data availability
No datasets were generated or analysed during the current study.
References
Alvanitopoulos, P. F., Andreadis, I., & Elenas, A. (2010). Neuro-fuzzy techniques for the classification of earthquake damages in buildings. Measurement, 43(6), 797–809.
Arslan, M. H. (2010). An evaluation of effective design parameters on earthquake performance of RC buildings using neural networks. Engineering Structures, 32(7), 1888–1898.
Bagheri, M., Chahkandi, A., & Jahangir, H. (2019). Seismic reliability analysis of RC frames rehabilitated by glass fiber-reinforced polymers. International Journal of Civil Engineering, 17, 1785–1797.
Bandara, R. P., Chan, T. H. T., & Thambiratnam, D. P. (2013). The three-stage artificial neural network method for damage assessment of building structures. Australian Journal of Structural Engineering, 14(1), 13–25.
Cho, Y., Khosravikia, F., & Rathje, E. M. (2022). A comparison of artificial neural network and classical regression models for earthquake-induced slope displacements. Soil Dynamics and Earthquake Engineering, 152, 107024.
Conte, J. P., Durrani, A. J., & Shelton, R. O. (1994). Seismic response modeling of multi-story buildings using neural networks. Journal of Intelligent Material Systems and Structures, 5(3), 392–402.
De Lautour, O. R., & Omenzetter, P. (2009). Prediction of seismic-induced structural damage using artificial neural networks. Engineering Structures, 31(2), 600–606.
Deo, B. D. N., & Datta, A. K. (2023). Cost-effective strengthening methodology for RCC buildings by jacketing against failure due to earthquake: A study. Proceedings of 17th Symposium on Earthquake Engineering IIT Roorkee, 2, pp193–205. Springer, Singapore.
Gholizadeh, S., & Salajegheh, E. (2010). Optimal seismic design of steel structures by an efficient soft computing-based algorithm. Journal of Constructional Steel Research, 66(1), 85–95.
Hait, P., Sil, A., & Choudhury, S. (2021). Prediction of global damage index of reinforced concrete building using artificial neural network. International Journal for Computational Methods in Engineering Science and Mechanics, 22(5), 386–399.
Hansapinyo, C., Latcharote, P., & Limkatanyu, S. (2020). Seismic building damage prediction from GIS-based building data using artificial intelligence system. Frontiers in Built Environment, 6, 576919.
Jafarzadeh, R., Ingham, J. M., Wilkinson, S., González, V., & Aghakouchak, A. A. (2014). Application of artificial neural network methodology for predicting seismic retrofit construction costs. Journal of Construction Engineering and Management, 140(2), 04013044.
Kaveh, A. (2017). Cost and CO2 emission optimization of reinforced concrete frames using enhanced colliding bodies optimization algorithm. Applications of Metaheuristic Optimization Algorithms in Civil Engineering, 319–350.
Kaveh, A., & Eslamlou, A. D. (2019). An efficient two-stage method for optimal sensor placement using graph‐theoretical partitioning and evolutionary algorithms. Structural Control and Health Monitoring, 26(4), e2325.
Kaveh, A., & Gaffarian, R. (2015). Shape optimization of arch dams with frequency constraints by enhanced charged system search algorithm and neural network. International Journal of Civil Engineering, 13(1), 102–111.
Kaveh, A., & Sabzi, O. (2011). A comparative study of two meta-heuristic algorithms for optimum design of reinforced concrete frames. International Journal of Civil Engineering, 9(3), 193–206.
Kaveh, A., & Zakian (2014). Seismic design optimisation of RC moment frames and dual shear wall-frame structures via CSS algorithm. Asian Journal of Civil Engineering, 15(2014), 435–465.
Kaveh, A., Bakhshpoori, T., & Hamze-Ziabari, S. M. (2018). GMDH-based prediction of shear strength of FRP-RC beams with and without stirrups. Computers and Concrete an International Journal, 22(2), 197–207.
Kaveh, A., Izadifard, R. A., & Mottaghi, L. (2020). Optimal design of planar RC frames considering CO2 emissions using ECBO, EVPS and PSO metaheuristic algorithms. Journal of Building Engineering, 28, 101014.
Kaveh, A., Eskandari, A., & Movasat, M. (2023). Buckling resistance prediction of high-strength steel columns using metaheuristic-trained artificial neural networks. In Structures, 56, 104853.
Kundu, T., Pal, A., Roy, P., Datta, A. K., & Topdar, P. (2024). Development of a novel real-time AE source localisation technique using ANN for health monitoring of rail section: An experimental study. Structural Health Monitoring, 23(1), 479–494.
Liu, J. C., Huang, L., Chen, Z., & Ye, H. (2022). A comparative study of artificial intelligent methods for explosive spalling diagnosis of hybrid fiber-reinforced ultra-high-performance concrete. International Journal of Civil Engineering, 20(6), 639–660.
Marquardt, D. W. (1963). An algorithm for least-squares estimation of nonlinear parameters. Journal of the Society for Industrial and Applied Mathematics, 11(2), 431–441.
Möller, O., Foschi, R. O., Quiroz, L. M., & Rubinstein, M. (2009). Structural optimization for performance-based design in earthquake engineering: Applications of neural networks. Structural Safety, 31(6), 490–499.
Nguyen, H. D., Dao, N. D., & Shin, M. (2021). Prediction of seismic drift responses of planar steel moment frames using artificial neural network and extreme gradient boosting. Engineering Structures, 242, 112518.
Özkan, E., Demir, A., & Turan, M. E. (2023). A New ANN based Rapid Assessment Method for RC Residential buildings. Structural Engineering International, 33(1), 32–40.
Pal, A., Kundu, T., & Datta, A. K. (2023). Damage localization in rail section using single AE sensor data: An experimental investigation with deep learning approach. Nondestructive Testing and Evaluation, 1–19.
Pal, A., Kundu, T., & Datta, A. K. (2023). Sensor-based smart diagnosis of rail defects using an ann model. Asian Journal of Civil Engineering, 24(8), 3001–3008.
Pal, A., Kundu, T., & Datta, A. K. (2023). Assessing the Influence of Welded Joint on Health Monitoring of Rail Sections: An experimental study employing SVM and ANN Models. Journal of Nondestructive Evaluation, 42(4), 102.
Rofooei, F. R., Kaveh, A., & Farahani, F. M. (2011). Estimating the vulnerability of the concrete moment resisting frame structures using artificial neural networks. International Journal of Optimization in Civil Engineering, 1(3), 433–448.
Shao, T., & Andrawes, B. (2022). Using machine learning to predict the seismic response of an SDOF RC structure with Superelastic Dampers. International Journal of Civil Engineering, 20(10), 1165–1180.
Sharma, N., Dasgupta, K., & Dey, A. (2022). Prediction of natural period of RC frame with shear wall supported on soil-pile foundation system using artificial neural network. Journal of Earthquake Engineering, 26(8), 4147–4171.
Sheikh, I. A., Khandel, O., Soliman, M., Haase, J. S., & Jaiswal, P. (2022). Seismic fragility analysis using nonlinear autoregressive neural networks with exogenous input. Structure and Infrastructure Engineering, 18(9), 1251–1265.
Sreenivas, B., Kumar, B., & Raghu Prasad, B. K. (2008). Investigation of the ductility demand in multi-story buildings subjected to near field ground motions using neural network approach. Journal of Earthquake Engineering, 12(8), 1314–1324.
Tsikas, P. K., Chassiakos, A. P., & Papadimitropoulos, V. C. (2024). Seismic damage assessment of highway bridges by means of soft computing techniques. Structure and Infrastructure Engineering, 20(3), 394–406.
Tsompanakis, Y., Lagaros, N. D., Psarropoulos, P. N., & Georgopoulos, E. C. (2009). Simulating the seismic response of embankments via artificial neural networks. Advances in Engineering Software, 40(8), 640–651.
Vafaei, M., Adnan, A. B., & Abd. Rahman, A. B. (2014). A neuro-wavelet technique for seismic damage identification of cantilever structures. Structure and Infrastructure Engineering, 10(12), 1666–1684.
Vahedian, V., Omranian, E., & Abdollahzadeh, G. (2022). A new method for generating aftershock records using artificial neural network. Journal of Earthquake Engineering, 26(1), 140–161.
Funding
The author(s) declare that no funds, grants, or other financial support were received for the research, authorship and/or publication of this article.
Author information
Authors and Affiliations
Contributions
Bikash Behera: Conceptualization, Methodology, Investigation, Data Curation, Writing - Original Draft. Aloke Kumar Datta: Conceptualization, Investigation, Data Curation, Writing - Review & Editing, Supervision. Apurba Pal: Supervision, Investigation, Data Curation, Writing - Review & Editing.
Corresponding author
Ethics declarations
Conflict of interest
The author(s) declared no potential conflicts of interest with respect to the research, authorship and/or publication of this article.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Behera, B., Datta, A.K. & Pal, A. Earthquake resistant design of framed reinforced concrete building using artificial intelligence model. Asian J Civ Eng (2024). https://doi.org/10.1007/s42107-024-01051-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s42107-024-01051-7