Abstract
Recent advances in next-generation energy storage devices have focused on flexible and wearable all-solid-state lithium batteries (ASSLBs), mainly because of their advantages in terms of safety and extensive applications. Among various technologies for the preparation of flexible electrodes, electrospinning is a straightforward operation and cost-effective mean for the facile fabrication of flexible nanofibers and the versatile design of nanofiber structure. Herein, current technologies for engineering electrospun nanofiber structures and their state-of-the-art implementation in flexible ASSLBs are reviewed. First, current strategies for nanofiber structural design, including advances in high-specific surface area, superior mechanical flexibility, and various nanostructures, are systematically discussed. Subsequently, the utilization of electrospun nanofibers in ASSLBs is reviewed. Electrospinning of flexible and highly ion-conductive solid-state electrolytes (SSEs) is emphasized, and current nanofiber structural designs for SSEs and electrodes for ASSLBs are introduced. Despite these advances, there have not been enough studies of the integration of versatile electrospinning techniques in nanofiber structural design for both SSEs and electrodes. In the final section, promising pathways to implement versatile electrospinning in flexible ASSLBs with superior electrochemical performance and stable cycling properties are discussed. Thus, this review provides a holistic overview of the state of the art of electrospinning for high-performance flexible ASSLBs, which could safely power next-generation flexible devices.
Graphical abstract
Similar content being viewed by others
References
Wang, S.J., Xiong, P., Zhang, J.Q., et al.: Recent progress on flexible lithium metal batteries: composite lithium metal anodes and solid-state electrolytes. Energy Storage Mater. 29, 310–331 (2020). https://doi.org/10.1016/j.ensm.2020.04.032
Fan, L., Wei, S.Y., Li, S.Y., et al.: Recent progress of the solid-state electrolytes for high-energy metal-based batteries. Adv. Energy Mater. 8, 1702657 (2018). https://doi.org/10.1002/aenm.201702657
Zhu, J., Chen, L.B., Xu, Z., et al.: Electrospinning preparation of ultra-long aligned nanofibers thin films for high performance fully flexible lithium-ion batteries. Nano Energy 12, 339–346 (2015). https://doi.org/10.1016/j.nanoen.2014.10.026
Sun, B., Long, Y.Z., Chen, Z.J., et al.: Recent advances in flexible and stretchable electronic devices via electrospinning. J. Mater. Chem. C 2, 1209–1219 (2014). https://doi.org/10.1039/c3tc31680g
Qian, G.Y., Liao, X.B., Zhu, Y.X., et al.: Designing flexible lithium-ion batteries by structural engineering. ACS Energy Lett. 4, 690–701 (2019). https://doi.org/10.1021/acsenergylett.8b02496
Yetisen, A.K., Qu, H., Manbachi, A., et al.: Nanotechnology in textiles. ACS Nano 10, 3042–3068 (2016). https://doi.org/10.1021/acsnano.5b08176
Chinnappan, A., Baskar, C., Baskar, S., et al.: An overview of electrospun nanofibers and their application in energy storage, sensors and wearable/flexible electronics. J. Mater. Chem. C 5, 12657–12673 (2017). https://doi.org/10.1039/c7tc03058d
Kenry, Lim, C.T.: Nanofiber technology: current status and emerging developments. Prog. Polym. Sci. 70, 1–17 (2017). https://doi.org/10.1016/j.progpolymsci.2017.03.002
Yang, G., Li, X.L., He, Y., et al.: From nano to micro to macro: electrospun hierarchically structured polymeric fibers for biomedical applications. Prog. Polym. Sci. 81, 80–113 (2018). https://doi.org/10.1016/j.progpolymsci.2017.12.003
Wang, X.F., Ding, B., Sun, G., et al.: Electro-spinning/netting: a strategy for the fabrication of three-dimensional polymer nano-fiber/nets. Prog. Mater. Sci. 58, 1173–1243 (2013). https://doi.org/10.1016/j.pmatsci.2013.05.001
Zhang, Z.M., Duan, Y.S., Xu, Q., et al.: A review on nanofiber fabrication with the effect of high-speed centrifugal force field. J. Eng. Fibers Fabr. 14, 155892501986751 (2019). https://doi.org/10.1177/1558925019867517
Thenmozhi, S., Dharmaraj, N., Kadirvelu, K., et al.: Electrospun nanofibers: new generation materials for advanced applications. Mater. Sci. Eng. B 217, 36–48 (2017). https://doi.org/10.1016/j.mseb.2017.01.001
Xing, X.B., Yu, H.Q., Zhu, D.B., et al.: Subwavelength and nanometer diameter optical polymer fibers as building blocks for miniaturized photonics integration. In: Xing, X.B.(ed.): Optical Communication, pp.289–320. InTechOpen (2012) https://doi.org/10.5772/47822
Huang, Z.M., Zhang, Y.Z., Kotaki, M., et al.: A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Compos. Sci. Technol. 63, 2223–2253 (2003). https://doi.org/10.1016/S0266-3538(03)00178-7
Teo, W.E., Ramakrishna, S.: A review on electrospinning design and nanofibre assemblies. Nanotechnology 17, R89–R106 (2006). https://doi.org/10.1088/0957-4484/17/14/R01
Lallave, M., Bedia, J., Ruiz-Rosas, R., et al.: Filled and hollow carbon nanofibers by coaxial electrospinning of Alcell lignin without binder polymers. Adv. Mater. 19, 4292–4296 (2007). https://doi.org/10.1002/adma.200700963
Bhardwaj, N., Kundu, S.C.: Electrospinning: a fascinating fiber fabrication technique. Biotechnol. Adv. 28, 325–347 (2010). https://doi.org/10.1016/j.biotechadv.2010.01.004
Persano, L., Camposeo, A., Tekmen, C., et al.: Industrial upscaling of electrospinning and applications of polymer nanofibers: a review. Macromol. Mater. Eng. 298, 504–520 (2013). https://doi.org/10.1002/mame.201200290
Peng, S.J., Li, L.L., Kong Yoong Lee, J., et al.: Electrospun carbon nanofibers and their hybrid composites as advanced materials for energy conversion and storage. Nano Energy 22, 361–395 (2016). https://doi.org/10.1016/j.nanoen.2016.02.001
Li, X.Y., Chen, Y.M., Huang, H.T., et al.: Electrospun carbon-based nanostructured electrodes for advanced energy storage: a review. Energy Storage Mater. 5, 58–92 (2016). https://doi.org/10.1016/j.ensm.2016.06.002
Inagaki, M., Yang, Y., Kang, F.Y.: Carbon nanofibers prepared via electrospinning. Adv. Mater. 24, 2547–2566 (2012). https://doi.org/10.1002/adma.201104940
Zhang, B., Kang, F.Y., Tarascon, J.M., et al.: Recent advances in electrospun carbon nanofibers and their application in electrochemical energy storage. Prog. Mater. Sci. 76, 319–380 (2016). https://doi.org/10.1016/j.pmatsci.2015.08.002
Kim, C., Yang, K., Kojima, M., et al.: Fabrication of electrospinning-derived carbon nanofiber webs for the anode material of lithium-ion secondary batteries. Adv. Funct. Mater. 16, 2393–2397 (2006). https://doi.org/10.1002/adfm.200500911
Li, W.H., Li, M.S., Adair, K.R., et al.: Carbon nanofiber-based nanostructures for lithium-ion and sodium-ion batteries. J. Mater. Chem. A 5, 13882–13906 (2017). https://doi.org/10.1039/c7ta02153d
Dong, Z.X., Kennedy, S.J., Wu, Y.Q.: Electrospinning materials for energy-related applications and devices. J. Power Sources 196, 4886–4904 (2011). https://doi.org/10.1016/j.jpowsour.2011.01.090
Cavaliere, S., Subianto, S., Savych, I., et al.: Electrospinning: designed architectures for energy conversion and storage devices. Energy Environ. Sci. 4, 4761 (2011). https://doi.org/10.1039/c1ee02201f
Lu, X.F., Wang, C., Favier, F., et al.: Electrospun nanomaterials for supercapacitor electrodes: designed architectures and electrochemical performance. Adv. Energy Mater. 7, 1601301 (2017). https://doi.org/10.1002/aenm.201601301
Jung, J.W., Lee, C.L., Yu, S., et al.: Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review. J. Mater. Chem. A 4, 703–750 (2016). https://doi.org/10.1039/c5ta06844d
Lv, F., Wang, Z.Y., Shi, L.Y., et al.: Challenges and development of composite solid-state electrolytes for high-performance lithium ion batteries. J. Power Sources 441, 227175 (2019). https://doi.org/10.1016/j.jpowsour.2019.227175
Xia, S.X., Wu, X.S., Zhang, Z.C., et al.: Practical challenges and future perspectives of all-solid-state lithium-metal batteries. Chem 5, 753–785 (2019). https://doi.org/10.1016/j.chempr.2018.11.013
Lopez, J., Mackanic, D.G., Cui, Y., et al.: Designing polymers for advanced battery chemistries. Nat. Rev. Mater. 4, 312–330 (2019). https://doi.org/10.1038/s41578-019-0103-6
Zhou, Q., Ma, J., Dong, S.M., et al.: Intermolecular chemistry in solid polymer electrolytes for high-energy-density lithium batteries. Adv. Mater. 31, 1902029 (2019). https://doi.org/10.1002/adma.201902029
Li, S., Zhang, S.Q., Shen, L., et al.: Progress and perspective of ceramic/polymer composite solid electrolytes for lithium batteries. Adv. Sci. 7, 1903088 (2020). https://doi.org/10.1002/advs.201903088
Balazs, A.C., Emrick, T., Russell, T.P.: Nanoparticle polymer composites: where two small worlds meet. Science 314, 1107–1110 (2006). https://doi.org/10.1126/science.1130557
Liu, W., Lee, S.W., Lin, D.C., et al.: Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires. Nat. Energy 2, 17035 (2017). https://doi.org/10.1038/nenergy.2017.35
Zhu, P., Yan, C.Y., Zhu, J.D., et al.: Flexible electrolyte-cathode bilayer framework with stabilized interface for room-temperature all-solid-state lithium-sulfur batteries. Energy Storage Mater. 17, 220–225 (2019). https://doi.org/10.1016/j.ensm.2018.11.009
Xue, J., Wu, T., Dai, Y., et al.: Electrospinning and electrospun nanofibers: methods, materials, and applications. Chem. Rev. 119, 5298–5415 (2019). https://doi.org/10.1021/acs.chemrev.8b00593
Sill, T.J., von Recum, H.A.: Electrospinning: applications in drug delivery and tissue engineering. Biomaterials 29, 1989–2006 (2008). https://doi.org/10.1016/j.biomaterials.2008.01.011
Doshi, J., Reneker, D.H.: Electrospinning process and applications of electrospun fibers. J. Electrost. 35, 151–160 (1995). https://doi.org/10.1016/0304-3886(95)00041-8
Agarwal, S., Wendorff, J.H., Greiner, A.: Progress in the field of electrospinning for tissue engineering applications. Adv. Mater. 21, 3343–3351 (2009). https://doi.org/10.1002/adma.200803092
Li, Q., Hu, C., Clarke, H., et al.: Microstructure defines the electroconductive and mechanical performance of plant-derived renewable carbon fiber. Chem. Commun. 55, 12655–12658 (2019). https://doi.org/10.1039/c9cc05016g
Zhang, X.W., Ji, L.W., Toprakci, O., et al.: Electrospun nanofiber-based anodes, cathodes, and separators for advanced lithium-ion batteries. Polym. Rev. 51, 239–264 (2011). https://doi.org/10.1080/15583724.2011.593390
Hwang, T.H., Lee, Y.M., Kong, B.S., et al.: Electrospun core-shell fibers for robust silicon nanoparticle-based lithium ion battery anodes. Nano Lett. 12, 802–807 (2012). https://doi.org/10.1021/nl203817r
Li, Q., Serem, W.K., Dai, W., et al.: Molecular weight and uniformity define the mechanical performance of lignin-based carbon fiber. J. Mater. Chem. A 5, 12740–12746 (2017). https://doi.org/10.1039/c7ta01187c
Raghavan, P., Lim, D.H., Ahn, J.H., et al.: Electrospun polymer nanofibers: the booming cutting edge technology. React. Funct. Polym. 72, 915–930 (2012). https://doi.org/10.1016/j.reactfunctpolym.2012.08.018
Li, Q., Xie, S.X., Wilson, K.: Quality carbon fibers from fractionated lignin. Green Chem. 19, 1628–1634 (2017). https://doi.org/10.1039/c6gc03555h
Theron, S.A., Zussman, E., Yarin, A.L.: Experimental investigation of the governing parameters in the electrospinning of polymer solutions. Polymer 45, 2017–2030 (2004). https://doi.org/10.1016/j.polymer.2004.01.024
Li, Q., Naik, M.T., Lin, H.S., et al.: Tuning hydroxyl groups for quality carbon fiber of lignin. Carbon 139, 500–511 (2018). https://doi.org/10.1016/j.carbon.2018.07.015
Xu, C.Y., Inai, R., Kotaki, M., et al.: Aligned biodegradable nanofibrous structure: a potential scaffold for blood vessel engineering. Biomaterials 25, 877–886 (2004). https://doi.org/10.1016/S0142-9612(03)00593-3
Murugan, R., Ramakrishna, S.: Design strategies of tissue engineering scaffolds with controlled fiber orientation. Tissue Eng. 13, 1845–1866 (2007). https://doi.org/10.1089/ten.2006.0078
Hohman, M.M., Shin, M., Rutledge, G., et al.: Electrospinning and electrically forced jets. I. Stability theory. Phys. Fluids 13, 2201–2220 (2001). https://doi.org/10.1063/1.1383791
Theron, A., Zussman, E., Yarin, A.L.: Electrostatic field-assisted alignment of electrospun nanofibres. Nanotechnology 12, 384–390 (2001). https://doi.org/10.1088/0957-4484/12/3/329
Chawla, S., Cai, J.Z., Naraghi, M.: Mechanical tests on individual carbon nanofibers reveals the strong effect of graphitic alignment achieved via precursor hot-drawing. Carbon 117, 208–219 (2017). https://doi.org/10.1016/j.carbon.2017.02.095
Naraghi, M., Arshad, S.N., Chasiotis, I.: Molecular orientation and mechanical property size effects in electrospun polyacrylonitrile nanofibers. Polymer 52, 1612–1618 (2011). https://doi.org/10.1016/j.polymer.2011.02.013
Xie, J., Macewan, M.R., Ray, W.Z., et al.: Radially aligned, electrospun nanofibers as dural substitutes for wound closure and tissue regeneration applications. ACS Nano 4, 5027–5036 (2010). https://doi.org/10.1021/nn101554u
Kessick, R., Fenn, J., Tepper, G.: The use of AC potentials in electrospraying and electrospinning processes. Polymer 45, 2981–2984 (2004). https://doi.org/10.1016/j.polymer.2004.02.056
Li, L.L., Peng, S.J., Lee, J.K.Y., et al.: Electrospun hollow nanofibers for advanced secondary batteries. Nano Energy 39, 111–139 (2017). https://doi.org/10.1016/j.nanoen.2017.06.050
Mao, X.W., Hatton, T., Rutledge, G.: A review of electrospun carbon fibers as electrode materials for energy storage. Curr. Org. Chem. 17, 1390–1401 (2013). https://doi.org/10.2174/1385272811317130006
Hedayati, R., Sadighi, M., Mohammadi-Aghdam, M., et al.: Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: analytical solutions and computational models. Mater. Sci. Eng. C 60, 163–183 (2016). https://doi.org/10.1016/j.msec.2015.11.001
Kim, B.H., Yang, K.S., Kim, Y.A., et al.: Solvent-induced porosity control of carbon nanofiber webs for supercapacitor. J. Power Sources 196, 10496–10501 (2011). https://doi.org/10.1016/j.jpowsour.2011.08.088
Yu, Y., Gu, L., Zhu, C.B., et al.: Tin nanoparticles encapsulated in porous multichannel carbon microtubes: preparation by single-nozzle electrospinning and application as anode material for high-performance Li-based batteries. J. Am. Chem. Soc. 131, 15984–15985 (2009). https://doi.org/10.1021/ja906261c
Yu, J.M., Wang, C., Li, S.H., et al.: Li+-containing, continuous silica nanofibers for high Li+ conductivity in composite polymer electrolyte. Small 15, 1902729 (2019). https://doi.org/10.1002/smll.201902729
Chen, H.Y., Di, J.C., Wang, N., et al.: Fabrication of hierarchically porous inorganic nanofibers by a general microemulsion electrospinning approach. Small 7, 1779–1783 (2011). https://doi.org/10.1002/smll.201002376
Moon, S., Choi, J., Farris, R.J.: Highly porous polyacrylonitrile/polystyrene nanofibers by electrospinning. Fibers Polym. 9, 276–280 (2008). https://doi.org/10.1007/s12221-008-0044-y
Li, Z., Zhang, J.T., Chen, Y.M., et al.: Pie-like electrode design for high-energy density lithium–sulfur batteries. Nat. Commun. 6, 8850 (2015). https://doi.org/10.1038/ncomms9850
Kim, C., Ngoc, B. . ., Yang, K. ., et al.: Self-sustained thin webs consisting of porous carbon nanofibers for supercapacitors via the electrospinning of polyacrylonitrile solutions containing zinc chloride. Adv. Mater. 19, 2341–2346 (2007). https://doi.org/10.1002/adma.200602184
Li, J., Liu, E.H., Li, W., et al.: Nickel/carbon nanofibers composite electrodes as supercapacitors prepared by electrospinning. J. Alloy. Compd. 478, 371–374 (2009). https://doi.org/10.1016/j.jallcom.2008.11.024
Im, J.S., Woo, S.W., Jung, M.J., et al.: Improved capacitance characteristics of electrospun ACFs by pore size control and vanadium catalyst. J. Colloid Interface Sci. 327, 115–119 (2008). https://doi.org/10.1016/j.jcis.2008.08.030
Kim, B.H., Yang, K.S., Woo, H.G.: Thin, bendable electrodes consisting of porous carbon nanofibers via the electrospinning of polyacrylonitrile containing tetraethoxy orthosilicate for supercapacitor. Electrochem. Commun. 13, 1042–1046 (2011). https://doi.org/10.1016/j.elecom.2011.06.024
Zhang, L.F., Aboagye, A., Kelkar, A., et al.: A review: carbon nanofibers from electrospun polyacrylonitrile and their applications. J. Mater. Sci. 49, 463–480 (2014). https://doi.org/10.1007/s10853-013-7705-y
Ghasemi, M., Shahgaldi, S., Ismail, M., et al.: Activated carbon nanofibers as an alternative cathode catalyst to platinum in a two-chamber microbial fuel cell. Int. J. Hydrog. Energy 36, 13746–13752 (2011). https://doi.org/10.1016/j.ijhydene.2011.07.118
Wang, G., Dong, Q., Ling, Z., et al.: Hierarchical activated carbon nanofiber webs with tuned structure fabricated by electrospinning for capacitive deionization. J. Mater. Chem. 22, 21819 (2012). https://doi.org/10.1039/c2jm34890j
Lee, K.J., Shiratori, N., Lee, G.H., et al.: Activated carbon nanofiber produced from electrospun polyacrylonitrile nanofiber as a highly efficient formaldehyde adsorbent. Carbon 48, 4248–4255 (2010). https://doi.org/10.1016/j.carbon.2010.07.034
Kim, C., Yang, K.S.: Electrochemical properties of carbon nanofiber web as an electrode for supercapacitor prepared by electrospinning. Appl. Phys. Lett. 83, 1216–1218 (2003). https://doi.org/10.1063/1.1599963
You, X.Y., Misra, M., Gregori, S., et al.: Preparation of an electric double layer capacitor (EDLC) using miscanthus-derived biocarbon. ACS Sustainable Chem. Eng. 6, 318–324 (2018). https://doi.org/10.1021/acssuschemeng.7b02563
You, X.Y., Koda, K., Yamada, T., et al.: Preparation of high-performance internal tandem electric double-layer capacitors (IT-EDLCs) from melt-spun lignin fibers. J. Wood Chem. Technol. 36, 418–431 (2016). https://doi.org/10.1080/02773813.2016.1212893
Chen, Y.J., Amiri, A., Boyd, J.G., et al.: Promising trade-offs between energy storage and load bearing in carbon nanofibers as structural energy storage devices. Adv. Funct. Mater. 29, 1901425 (2019). https://doi.org/10.1002/adfm.201901425
Zhou, Z.P., Liu, G.L.: Controlling the pore size of mesoporous carbon thin films through thermal and solvent annealing. Small 13, 1603107 (2017). https://doi.org/10.1002/smll.201603107
Zhou, Z.P., Liu, T., Khan, A.U., et al.: Block copolymer–based porous carbon fibers. Sci. Adv. 5, eaau6852–eaau6860 (2019). https://doi.org/10.1126/sciadv.aau6852
Liu, T., Zhou, Z., Guo, Y., et al.: Block copolymer derived uniform mesopores enable ultrafast electron and ion transport at high mass loadings. Nat. Commun. 10, 675–684 (2019). https://doi.org/10.1038/s41467-019-08644-w
Liu, T., Liu, G.L.: Block copolymers for supercapacitors, dielectric capacitors and batteries. J. Phys.: Condens. Matter 31, 233001 (2019). https://doi.org/10.1088/1361-648x/ab0d77
Yu, D.G., Wang, M.L., Li, X.Y., et al.: Multifluid electrospinning for the generation of complex nanostructures. Wiley Interdiscip. Rev.-Nanomed. Nanobiotechnol.12, e1601 (2020). https://doi.org/10.1002/wnan.1601
Sun, Z., Zussman, E., Yarin, A.L., et al.: Compound core–shell polymer nanofibers by Co-electrospinning. Adv. Mater. 15, 1929–1932 (2003). https://doi.org/10.1002/adma.200305136
Dror, Y., Salalha, W., Avrahami, R., et al.: One-step production of polymeric microtubes by Co-electrospinning. Small 3, 1064–1073 (2007). https://doi.org/10.1002/smll.200600536
Tuncel, D., Matthews, J., Anderson, H.: Synthesis of nanowalled polymer microtubes using glass fiber templates. Adv. Funct. Mater. 14, 851–855 (2004). https://doi.org/10.1002/adfm.200305201
Kim, S.W., Kim, M., Lee, W.Y., et al.: Fabrication of hollow palladium spheres and their successful application to the recyclable heterogeneous catalyst for Suzuki coupling reactions. J. Am. Chem. Soc. 124, 7642–7643 (2002). https://doi.org/10.1021/ja026032z
Wen, X.J., Tresco, P.A.: Fabrication and characterization of permeable degradable poly(dl-lactide-co-glycolide) (PLGA) hollow fiber phase inversion membranes for use as nerve tract guidance channels. Biomaterials 27, 3800–3809 (2006). https://doi.org/10.1016/j.biomaterials.2006.02.036
Li, D., Xia, Y.N.: Direct fabrication of composite and ceramic hollow nanofibers by electrospinning. Nano Lett. 4, 933–938 (2004). https://doi.org/10.1021/nl049590f
McCann, J.T., Li, D., Xia, Y.N.: Electrospinning of nanofibers with core-sheath, hollow, or porous structures. J. Mater. Chem. 15, 735 (2005). https://doi.org/10.1039/b415094e
Loscertales, I.G., Barrero, A., Márquez, M., et al.: Electrically forced coaxial nanojets for one-step hollow nanofiber design. J. Am. Chem. Soc. 126, 5376–5377 (2004). https://doi.org/10.1021/ja049443j
Liu, X.K., Yang, Y.Y., Yu, D.G., et al.: Tunable zero-order drug delivery systems created by modified triaxial electrospinning. Chem. Eng. J. 356, 886–894 (2019). https://doi.org/10.1016/j.cej.2018.09.096
Yang, C., Yu, D.G., Pan, D., et al.: Electrospun pH-sensitive core–shell polymer nanocomposites fabricated using a tri-axial process. Acta Biomater. 35, 77–86 (2016). https://doi.org/10.1016/j.actbio.2016.02.029
Chen, H., Wang, N., Di, J., et al.: Nanowire-in-microtube structured core/shell fibers via multifluidic coaxial electrospinning. Langmuir 26, 11291–11296 (2010). https://doi.org/10.1021/la100611f
Yang, H.F., Lightner, C.R., Dong, L.: Light-emitting coaxial nanofibers. ACS Nano 6, 622–628 (2012). https://doi.org/10.1021/nn204055t
Moghe, A.K., Gupta, B.S.: Co-axial electrospinning for nanofiber structures: preparation and applications. Polym. Rev. 48, 353–377 (2008). https://doi.org/10.1080/15583720802022257
Qu, H.L., Wei, S.Y., Guo, Z.H.: Coaxial electrospun nanostructures and their applications. J. Mater. Chem. A 1, 11513 (2013). https://doi.org/10.1039/c3ta12390a
Yu, Y., Gu, L., Wang, C.L., et al.: Encapsulation of sn@carbon nanoparticles in bamboo-like hollow carbon nanofibers as an anode material in lithium-based batteries. Angew. Chem. Int. Edit. 121, 6607–6611 (2009). https://doi.org/10.1002/ange.200901723
Park, G.D., Kang, Y.C.: Enhanced Li-ion storage performance of novel tube-in-tube structured nanofibers with hollow metal oxide nanospheres covered with a graphitic carbon layer. Nanoscale 12, 8404–8414 (2020). https://doi.org/10.1039/d0nr00592d
Gao, S.W., Wang, N., Li, S., et al.: A multi-wall Sn/SnO2@carbon hollow nanofiber anode material for high-rate and long-life lithium-ion batteries. Angew. Chem. Int. Edit. 59, 2465–2472 (2020). https://doi.org/10.1002/anie.201913170
Nam, D.H., Kim, J.W., Lee, J.H., et al.: Tunable Sn structures in porosity-controlled carbon nanofibers for all-solid-state lithium-ion battery anodes. J. Mater. Chem. A 3, 11021–11030 (2015). https://doi.org/10.1039/c5ta00884k
Zhao, Y., Cao, X.Y., Jiang, L.: Bio-mimic multichannel microtubes by a facile method. J. Am. Chem. Soc. 129, 764–765 (2007). https://doi.org/10.1021/ja068165g
Zhao, Y., Jiang, L.: Hollow micro/nanomaterials with multilevel interior structures. Adv. Mater. 21, 3621–3638 (2009). https://doi.org/10.1002/adma.200803645
Mai, Y.Y., Eisenberg, A.: Self-assembly of block copolymers. Chem. Soc. Rev. 41, 5969–5985 (2012). https://doi.org/10.1039/c2cs35115c
Ma, M.L., Krikorian, V., Yu, J.H., et al.: Electrospun polymer nanofibers with internal periodic structure obtained by microphase separation of cylindrically confined block copolymers. Nano Lett. 6, 2969–2972 (2006). https://doi.org/10.1021/nl062311z
Ma, M.L., Titievsky, K., Thomas, E.L., et al.: Continuous concentric lamellar block copolymer nanofibers with long range order. Nano Lett. 9, 1678–1683 (2009). https://doi.org/10.1021/nl900265y
Schacher, F.H., Rupar, P.A., Manners, I.: Functional block copolymers: nanostructured materials with emerging applications. Angew. Chem. Int. Edit. 51, 7898–7921 (2012). https://doi.org/10.1002/anie.201200310
Blanazs, A., Armes, S.P., Ryan, A.J.: Self-assembled block copolymer aggregates: from micelles to vesicles and their biological applications. Macromol. Rapid Commun. 30, 267–277 (2009). https://doi.org/10.1002/marc.200800713
Niu, H.T., Zhang, J., Xie, Z.L., et al.: Preparation, structure and supercapacitance of bonded carbon nanofiber electrode materials. Carbon 49, 2380–2388 (2011). https://doi.org/10.1016/j.carbon.2011.02.005
Wu, H., Hu, L., Rowell, M.W., et al.: Electrospun metal nanofiber webs as high-performance transparent electrode. Nano Lett. 10, 4242–4248 (2010). https://doi.org/10.1021/nl102725k
Dallmeyer, J.L.: Preparation and characterization of lignin nanofibre-based materials obtained by electrostatic spinning. Doctoral dissertation, University of British Columbia (2013)
Schlee, P., Hosseinaei, O., Baker, D., et al.: From waste to wealth: from kraft lignin to free-standing supercapacitors. Carbon 145, 470–480 (2019). https://doi.org/10.1016/j.carbon.2019.01.035
Roman, J., Neri, W., Derré, A., et al.: Electrospun lignin-based twisted carbon nanofibers for potential microelectrodes applications. Carbon 145, 556–564 (2019). https://doi.org/10.1016/j.carbon.2019.01.036
Tenhaeff, W.E., Rios, O., More, K., et al.: Highly robust lithium ion battery anodes from lignin: an abundant, renewable, and low-cost material. Adv. Funct. Mater. 24, 86–94 (2014). https://doi.org/10.1002/adfm.201301420
Milczarek, G., Inganäs, O.: Renewable cathode materials from biopolymer/conjugated polymer interpenetrating networks. Science 335, 1468–1471 (2012). https://doi.org/10.1126/science.1215159
Peng, Z.Y., Zou, Y.B., Xu, S.Q., et al.: High-performance biomass-based flexible solid-state supercapacitor constructed of pressure-sensitive lignin-based and cellulose hydrogels. ACS Appl. Mater. Interfaces 10, 22190–22200 (2018). https://doi.org/10.1021/acsami.8b05171
Wang, S.X., Yang, L.P., Stubbs, L.P., et al.: Lignin-derived fused electrospun carbon fibrous mats as high performance anode materials for lithium ion batteries. ACS Appl. Mater. Interfaces 5, 12275–12282 (2013). https://doi.org/10.1021/am4043867
Wang, X.E., Kerr, R., Chen, F.F., et al.: Toward high-energy-density lithium metal batteries: opportunities and challenges for solid organic electrolytes. Adv. Mater. 32, 1905219 (2020). https://doi.org/10.1002/adma.201905219
Kim, D.H.: Thin and flexible solid electrolyte membranes with ultrahigh thermal stability derived from solution-processable Li argyrodites for all-solid-state Li-ion batteries. ACS Energy Lett. 5, 718–727 (2020)
Hu, J.K., He, P.G., Zhang, B.C., et al.: Porous film host-derived 3D composite polymer electrolyte for high-voltage solid state lithium batteries. Energy Storage Mater. 26, 283–289 (2020). https://doi.org/10.1016/j.ensm.2020.01.006
Wang, X.E., Girard, G.M.A., Zhu, H.J., et al.: Poly(ionic liquid)s/electrospun nanofiber composite polymer electrolytes for high energy density and safe Li metal batteries. ACS Appl. Energy Mater. 2, 6237–6245 (2019). https://doi.org/10.1021/acsaem.9b00765
Zhou, Y.D., Wang, X.E., Zhu, H.J., et al.: Solid-state lithium conductors for lithium metal batteries based on electrospun nanofiber/plastic crystal composites. Chemsuschem 10, 3135–3145 (2017). https://doi.org/10.1002/cssc.201700691
Watanabe, T., Inafune, Y., Tanaka, M., et al.: Development of all-solid-state battery based on lithium ion conductive polymer nanofiber framework. J. Power Sources 423, 255–262 (2019). https://doi.org/10.1016/j.jpowsour.2019.03.066
Wang, C.S., Zhang, X.W., Appleby, A.J.: Solvent-free composite PEO-ceramic fiber/mat electrolytes for lithium secondary cells. J. Electrochem. Soc. 152, A205 (2005). https://doi.org/10.1149/1.1828952
Liu, W., Liu, N., Sun, J., et al.: Ionic conductivity enhancement of polymer electrolytes with ceramic nanowire fillers. Nano Lett. 15, 2740–2745 (2015). https://doi.org/10.1021/acs.nanolett.5b00600
Li, B.Y., Su, Q.M., Yu, L.T., et al.: Li0.35La0.55TiO3 nanofibers enhanced poly(vinylidene fluoride)-based composite polymer electrolytes for all-solid-state batteries. ACS Appl. Mater. Interfaces 11, 42206–42213 (2019). https://doi.org/10.1021/acsami.9b14824
Li, Y., Zhang, W., Dou, Q.Q., et al.: Li7La3Zr2O12 ceramic nanofiber-incorporated composite polymer electrolytes for lithium metal batteries. J. Mater. Chem. A 7, 3391–3398 (2019). https://doi.org/10.1039/c8ta11449h
Fu, K.K., Gong, Y., Dai, J., et al.: Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries. Proc. Natl. Acad. Sci. U. S. A. 113, 7094–7099 (2016). https://doi.org/10.1073/pnas.1600422113
Zhu, P., Yan, C.Y., Dirican, M., et al.: Li0.33La0.557TiO3 ceramic nanofiber-enhanced polyethylene oxide-based composite polymer electrolytes for all-solid-state lithium batteries. J. Mater. Chem. A 6, 4279–4285 (2018). https://doi.org/10.1039/c7ta10517g
Yu, L., Canfield, N.L., Chen, S.R., et al.: Enhanced stability of lithium metal anode by using a 3D porous nickel substrate. ChemElectroChem 5, 761–769 (2018). https://doi.org/10.1002/celc.201701250
Wang, X.Z., Zhang, Y.B., Zhang, X., et al.: Lithium-salt-rich PEO/Li0.3La0.557TiO3 interpenetrating composite electrolyte with three-dimensional ceramic nano-backbone for all-solid-state lithium-ion batteries. ACS Appl. Mater. Interfaces 10, 24791–24798 (2018). https://doi.org/10.1021/acsami.8b06658
Liu, K., Zhang, R.H., Sun, J., et al.: Polyoxyethylene (PEO)|PEO-Perovskite|PEO composite electrolyte for all-solid-state lithium metal batteries. ACS Appl. Mater. Interfaces 11, 46930–46937 (2019). https://doi.org/10.1021/acsami.9b16936
Yan, C.Y., Zhu, P., Jia, H., et al.: Garnet-rich composite solid electrolytes for dendrite-free, high-rate, solid-state lithium-metal batteries. Energy Storage Mater. 26, 448–456 (2020). https://doi.org/10.1016/j.ensm.2019.11.018
Yang, H., Bright, J., Chen, B.H., et al.: Chemical interaction and enhanced interfacial ion transport in a ceramic nanofiber-polymer composite electrolyte for all-solid-state lithium metal batteries. J. Mater. Chem. A 8, 7261–7272 (2020). https://doi.org/10.1039/c9ta12495k
Zhao, Y., Yan, J.H., Cai, W.P., et al.: Elastic and well-aligned ceramic LLZO nanofiber-based electrolytes for solid-state lithium batteries. Energy Storage Mater. 23, 306–313 (2019). https://doi.org/10.1016/j.ensm.2019.04.043
Wu, Q.Y., Chen, X.N., Wan, L.S., et al.: Interactions between polyacrylonitrile and solvents: density functional theory study and two-dimensional infrared correlation analysis. J. Phys. Chem. B 116, 8321–8330 (2012). https://doi.org/10.1021/jp304167f
Foran, G., Mankovsky, D., Verdier, N., et al.: The impact of absorbed solvent on the performance of solid polymer electrolytes for use in solid-state lithium batteries. iScience 23, 101597 (2020). https://doi.org/10.1016/j.isci.2020.101597
Huttner, F., Haselrieder, W., Kwade, A.: The influence of different post-drying procedures on remaining water content and physical and electrochemical properties of lithium-ion batteries. Energy Technol. 8, 1900245 (2020). https://doi.org/10.1002/ente.201900245
Fu, L.J., Zhang, H.P., Wu, Y.P., et al.: Surface active sites: an important factor affecting the sensitivity of carbon anode material toward humidity. Electrochem. Solid-State Lett. 8, A456 (2005). https://doi.org/10.1149/1.1990047
Rupich, M.W., Pitts, L., Abraham, K.M.: Characterization of reactions and products of the discharge and forced overdischarge of Li/SO2 cells. J. Electrochem. Soc. 129, 1857–1861 (1982). https://doi.org/10.1149/1.2124314
Li, J.L., Daniel, C., An, S.J., et al.: Evaluation residual moisture in lithium-ion battery electrodes and its effect on electrode performance. MRS Adv. 1, 1029–1035 (2016). https://doi.org/10.1557/adv.2016.6
Stich, M., Pandey, N., Bund, A.: Drying and moisture resorption behaviour of various electrode materials and separators for lithium-ion batteries. J. Power Sources 364, 84–91 (2017). https://doi.org/10.1016/j.jpowsour.2017.08.009
Fenton, D.E., Parker, J.M., Wright, P.V.: Complexes of alkali metal ions with poly(ethylene oxide). Polymer 14, 589 (1973). https://doi.org/10.1016/0032-3861(73)90146-8
Savoie, B.M., Webb, M.A., Miller, T.F., III.: Enhancing cation diffusion and suppressing anion diffusion via lewis-acidic polymer electrolytes. J. Phys. Chem. Lett. 8, 641–646 (2017). https://doi.org/10.1021/acs.jpclett.6b02662
Sun, J., Stone, G.M., Balsara, N.P., et al.: Structure–conductivity relationship for peptoid-based PEO–mimetic polymer electrolytes. Macromolecules 45, 5151–5156 (2012). https://doi.org/10.1021/ma300775b
Nishimoto, A., Agehara, K., Furuya, N., et al.: High ionic conductivity of polyether-based network polymer electrolytes with hyperbranched side chains. Macromolecules 32, 1541–1548 (1999). https://doi.org/10.1021/ma981436q
Hawker, C.J., Chu, F.K., Pomery, P.J., et al.: Hyperbranched Poly(ethylene glycol)s: a new class of ion-conducting materials. Macromolecules 29, 3831–3838 (1996). https://doi.org/10.1021/ma951909i
Stone, G.M., Mullin, S.A., Teran, A.A., et al.: Resolution of the modulus versus adhesion dilemma in solid polymer electrolytes for rechargeable lithium metal batteries. J. Electrochem. Soc. 159, A222–A227 (2012). https://doi.org/10.1149/2.030203jes
Young, N.P., Devaux, D., Khurana, R., et al.: Investigating polypropylene-poly(ethylene oxide)-polypropylene triblock copolymers as solid polymer electrolytes for lithium batteries. Solid State Ionics 263, 87–94 (2014). https://doi.org/10.1016/j.ssi.2014.05.012
Bouchet, R., Phan, T.N.T., Beaudoin, E., et al.: Charge transport in nanostructured PS-PEO-PS triblock copolymer electrolytes. Macromolecules 47, 2659–2665 (2014). https://doi.org/10.1021/ma500420w
Bates, C.M., Chang, A.B., Momčilović, N., et al.: ABA triblock brush polymers: synthesis, self-assembly, conductivity, and rheological properties. Macromolecules 48, 4967–4973 (2015). https://doi.org/10.1021/acs.macromol.5b00880
Bouchet, R., Maria, S., Meziane, R., et al.: Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries. Nat. Mater. 12, 452–457 (2013). https://doi.org/10.1038/nmat3602
Lin, Z.Y., Guo, X.W., Yang, Y.B., et al.: Block copolymer electrolyte with adjustable functional units for solid polymer lithium metal battery. J. Energy Chem. 52, 67–74 (2021). https://doi.org/10.1016/j.jechem.2020.04.052
Khurana, R., Schaefer, J.L., Archer, L.A., et al.: Suppression of lithium dendrite growth using cross-linked polyethylene/poly(ethylene oxide) electrolytes: a new approach for practical lithium-metal polymer batteries. J. Am. Chem. Soc. 136, 7395–7402 (2014). https://doi.org/10.1021/ja502133j
Pan, Q.W., Smith, D.M., Qi, H., et al.: Hybrid electrolytes with controlled network structures for lithium metal batteries. Adv. Mater. 27, 5995–6001 (2015). https://doi.org/10.1002/adma.201502059
Peramunage, D., Pasquariello, D.M., Abraham, K.M.: Polyacrylonitrile-based electrolytes with ternary solvent mixtures as plasticizers. J. Electrochem. Soc. 142, 1789–1798 (1995). https://doi.org/10.1149/1.2044195
Watanabe, M., Kanba, M., Nagaoka, K., et al.: Ionic conductivity of hybrid films composed of polyacrylonitrile, ethylene carbonate, and LiClO4. J. Polym. Sci.: Polym. Phys. Ed. 21, 939–948 (1983). https://doi.org/10.1002/pol.1983.180210610
Webb, M.A., Jung, Y., Pesko, D.M., et al.: Systematic computational and experimental investigation of lithium-ion transport mechanisms in polyester-based polymer electrolytes. ACS Central Sci. 1, 198–205 (2015). https://doi.org/10.1021/acscentsci.5b00195
Liu, L.H., Lyu, J., Mo, J.S., et al.: Comprehensively-upgraded polymer electrolytes by multifunctional aramid nanofibers for stable all-solid-state Li-ion batteries. Nano Energy 69, 104398 (2020). https://doi.org/10.1016/j.nanoen.2019.104398
Porcarelli, L., Shaplov, A.S., Bella, F., et al.: Single-ion conducting polymer electrolytes for lithium metal polymer batteries that operate at ambient temperature. ACS Energy Lett. 1, 678–682 (2016). https://doi.org/10.1021/acsenergylett.6b00216
Mai, L., Tian, X., Xu, X., et al.: Nanowire electrodes for electrochemical energy storage devices. Chem. Rev. 114, 11828–11862 (2014). https://doi.org/10.1021/cr500177a
Li, X.Y., Chen, W.C., Qian, Q.R., et al.: Electrospinning-based strategies for battery materials. Adv. Energy Mater. 11, 2000845 (2021). https://doi.org/10.1002/aenm.202000845
Wang, H.G., Yuan, S., Ma, D.L., et al.: Electrospun materials for lithium and sodium rechargeable batteries: from structure evolution to electrochemical performance. Energy Environ. Sci. 8, 1660–1681 (2015). https://doi.org/10.1039/c4ee03912b
Liu, M., Deng, N.P., Ju, J.G., et al.: A review: electrospun nanofiber materials for lithium-sulfur batteries. Adv. Funct. Mater. 29, 1905467 (2019). https://doi.org/10.1002/adfm.201905467
Liu, Q., Zhu, J.H., Zhang, L.W., et al.: Recent advances in energy materials by electrospinning. Renew. Sustain. Energy Rev. 81, 1825–1858 (2018). https://doi.org/10.1016/j.rser.2017.05.281
Pandey, G.P., Klankowski, S.A., Li, Y.H., et al.: Effective infiltration of gel polymer electrolyte into silicon-coated vertically aligned carbon nanofibers as anodes for solid-state lithium-ion batteries. ACS Appl. Mater. Interfaces 7, 20909–20918 (2015). https://doi.org/10.1021/acsami.5b06444
Klankowski, S.A., Rojeski, R.A., Cruden, B.A., et al.: A high-performance lithium-ion battery anode based on the core–shell heterostructure of silicon-coated vertically aligned carbon nanofibers. J. Mater. Chem. A 1, 1055–1064 (2013). https://doi.org/10.1039/c2ta00057a
Slater, M.D., Kim, D., Lee, E., et al.: Sodium-ion batteries. Adv. Funct. Mater. 23, 947–958 (2013). https://doi.org/10.1002/adfm.201200691
Nayak, P.K., Yang, L.T., Brehm, W., et al.: From lithium-ion to sodium-ion batteries: advantages, challenges, and surprises. Angew. Chem.-Int. Edit. 57, 102–120 (2018). https://doi.org/10.1002/anie.201703772
Kim, S.W., Seo, D.H., Ma, X.H., et al.: Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries. Adv. Energy Mater. 2, 710–721 (2012). https://doi.org/10.1002/aenm.201200026
Vaalma, C., Buchholz, D., Weil, M., et al.: A cost and resource analysis of sodium-ion batteries. Nat. Rev. Mater. 3, 18013 (2018). https://doi.org/10.1038/natrevmats.2018.13
Hwang, J.Y., Myung, S.T., Sun, Y.K.: Sodium-ion batteries: present and future. Chem. Soc. Rev. 46, 3529–3614 (2017). https://doi.org/10.1039/c6cs00776g
Yabuuchi, N., Kubota, K., Dahbi, M., et al.: Research development on sodium-ion batteries. Chem. Rev. 114, 11636–11682 (2014). https://doi.org/10.1021/cr500192f
Gao, R.T., Tan, R., Han, L., et al.: Nanofiber networks of Na3V2(PO4)3 as a cathode material for high performance all-solid-state sodium-ion batteries. J. Mater. Chem. A 5, 5273–5277 (2017). https://doi.org/10.1039/c7ta00314e
Zhang, X., Xie, J., Shi, F., et al.: Vertically aligned and continuous nanoscale ceramic-polymer interfaces in composite solid polymer electrolytes for enhanced ionic conductivity. Nano Lett. 18, 3829–3838 (2018). https://doi.org/10.1021/acs.nanolett.8b01111
Liu, K., Wu, M.C., Wei, L., et al.: A composite solid electrolyte with a framework of vertically aligned perovskite for all-solid-state Li-metal batteries. J. Membr. Sci. 610, 118265 (2020). https://doi.org/10.1016/j.memsci.2020.118265
Zhai, H.W., Xu, P.Y., Ning, M.Q., et al.: A flexible solid composite electrolyte with vertically aligned and connected ion-conducting nanoparticles for lithium batteries. Nano Lett. 17, 3182–3187 (2017). https://doi.org/10.1021/acs.nanolett.7b00715
Tang, W.J., Tang, S., Guan, X.Z., et al.: High-performance solid polymer electrolytes filled with vertically aligned 2D materials. Adv. Funct. Mater. 29, 1900648 (2019). https://doi.org/10.1002/adfm.201900648
Wang, X., Zhai, H.W., Qie, B.Y., et al.: Rechargeable solid-state lithium metal batteries with vertically aligned ceramic nanoparticle/polymer composite electrolyte. Nano Energy 60, 205–212 (2019). https://doi.org/10.1016/j.nanoen.2019.03.051
Wan, J.Y., Xie, J., Kong, X., et al.: Ultrathin, flexible, solid polymer composite electrolyte enabled with aligned nanoporous host for lithium batteries. Nat. Nanotechnol. 14, 705–711 (2019). https://doi.org/10.1038/s41565-019-0465-3
Wang, X., Wang, T.Y., Borovilas, J., et al.: Vertically-aligned nanostructures for electrochemical energy storage. Nano Res. 12, 2002–2017 (2019). https://doi.org/10.1007/s12274-019-2392-x
Wolfenstine, J., Allen, J.L., Sakamoto, J., et al.: Mechanical behavior of Li-ion-conducting crystalline oxide-based solid electrolytes: a brief review. Ionics 24, 1271–1276 (2018). https://doi.org/10.1007/s11581-017-2314-4
Ke, X.Y., Wang, Y., Ren, G.F., et al.: Towards rational mechanical design of inorganic solid electrolytes for all-solid-state lithium ion batteries. Energy Storage Mater. 26, 313–324 (2020). https://doi.org/10.1016/j.ensm.2019.08.029
Bi, J.Y., Mu, D.B., Wu, B.R., et al.: A hybrid solid electrolyte Li0.33La0.557TiO3/poly(acylonitrile) membrane infiltrated with a succinonitrile-based electrolyte for solid state lithium-ion batteries. J. Mater. Chem. A 8, 706–713 (2020). https://doi.org/10.1039/c9ta08601c
Li, D., Chen, L., Wang, T.S., et al.: 3D fiber-network-reinforced bicontinuous composite solid electrolyte for dendrite-free lithium metal batteries. ACS Appl. Mater. Interfaces 10, 7069–7078 (2018). https://doi.org/10.1021/acsami.7b18123
Jia, M.Y., Zhao, N., Huo, H.Y., et al.: Comprehensive investigation into garnet electrolytes toward application-oriented solid lithium batteries. Electrochem. Energy Rev. 3, 656–689 (2020). https://doi.org/10.1007/s41918-020-00076-1
Yan, C.Y., Zhu, P., Jia, H., et al.: High-performance 3-D fiber network composite electrolyte enabled with Li-ion conducting nanofibers and amorphous PEO-based cross-linked polymer for ambient all-solid-state lithium-metal batteries. Adv. Fiber Mater. 1, 46–60 (2019). https://doi.org/10.1007/s42765-019-00006-x
He, K.Q., Zha, J.W., Du, P., et al.: Tailored high cycling performance in a solid polymer electrolyte with perovskite-type Li0.33La0.557TiO3 nanofibers for all-solid-state lithium ion batteries. Dalton Trans. 48, 3263–3269 (2019). https://doi.org/10.1039/c9dt00074g
Wang, S., Zhang, L., Li, J.Y., et al.: A nanowire-nanoparticle double composite polymer electrolyte for high performance ambient temperature solid-state lithium batteies. Electrochim. Acta 320, 134560 (2019). https://doi.org/10.1016/j.electacta.2019.134560
Zhang, L., Wang, S., Li, J.Y., et al.: A nitrogen-containing all-solid-state hyperbranched polymer electrolyte for superior performance lithium batteries. J. Mater. Chem. A 7, 6801–6808 (2019). https://doi.org/10.1039/c9ta00180h
Liu, W., Lin, D., Sun, J., et al.: Improved lithium ionic conductivity in composite polymer electrolytes with oxide-ion conducting nanowires. ACS Nano 10, 11407–11413 (2016). https://doi.org/10.1021/acsnano.6b06797
Cao, D.X., Sun, X., Li, Q., et al.: Lithium dendrite in all-solid-state batteries: growth mechanisms, suppression strategies, and characterizations. Matter 3, 57–94 (2020). https://doi.org/10.1016/j.matt.2020.03.015
Yang, T., Zheng, J., Cheng, Q., et al.: Composite polymer electrolytes with Li7La3Zr2O12 garnet-type nanowires as ceramic fillers: mechanism of conductivity enhancement and role of doping and morphology. ACS Appl. Mater. Interfaces 9, 21773–21780 (2017). https://doi.org/10.1021/acsami.7b03806
Balaish, M., Gonzalez-Rosillo, J.C., Kim, K.J., et al.: Processing thin but robust electrolytes for solid-state batteries. Nat. Energy 6, 227–239 (2021). https://doi.org/10.1038/s41560-020-00759-5
Zhao, Y., Zheng, K., Sun, X.L.: Addressing interfacial issues in liquid-based and solid-state batteries by atomic and molecular layer deposition. Joule 2, 2583–2604 (2018). https://doi.org/10.1016/j.joule.2018.11.012
Yang, X.F., Adair, K.R., Gao, X.J., et al.: Recent advances and perspectives on thin electrolytes for high-energy-density solid-state lithium batteries. Energy Environ. Sci. 14, 643–671 (2021). https://doi.org/10.1039/d0ee02714f
Wang, C.H., Liang, J.W., Zhao, Y., et al.: All-solid-state lithium batteries enabled by sulfide electrolytes: from fundamental research to practical engineering design. Energy Environ. Sci. 14, 2577–2619 (2021). https://doi.org/10.1039/d1ee00551k
Acknowledgements
Financial supports to Hongli Zhu from the National Science Foundation Electrochemical Systems Program at the Division of Chemical, Bioengineering, Environmental, and Transport Systems (CBET-1924534) and Rogers Corporation, United States are acknowledged.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
All authors declare no conflicts of interest.
Ethics approval
Not applicable.
Rights and permissions
About this article
Cite this article
Li, Q., Sun, X., Cao, D. et al. Versatile Electrospinning for Structural Designs and Ionic Conductor Orientation in All-Solid-State Lithium Batteries. Electrochem. Energy Rev. 5, 18 (2022). https://doi.org/10.1007/s41918-022-00170-6
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s41918-022-00170-6