Abstract
The adoption of hybrid fluids in machining processes offers multiple benefits, including improved heat dissipation, enhanced lubrication, extended tool life, better surface quality, and reduced environmental impact. These advantages make hybrid fluids an attractive choice for modern machining applications, where efficiency, performance, and sustainability are paramount. A hybrid nanofluid consists of two or more different types of nanoparticles in the base fluid. The primary goal of creating a hybrid nanofluid is to enhance thermal conductivity and heat transfer properties when combined than when employed separately as a standard mono-nanofluid. This paper reports various hybrid nanofluids used in the machining industries. Also, hybridization can make hybrid nanofluids extremely effective at improving heat transfer, surface roughness, and tool life. This study provides an overview of the thermophysical characteristics of hybrid nanofluids and preparation techniques.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Afrand M, Toghraie D, Ruhani B (2016) Effects of temperature and nanoparticles concentration on rheological behavior of Fe3O4–Ag/EG hybrid nanofluid: an experimentalstudy. Exp Therm Fluid Sci 77:38–44. https://doi.org/10.1016/j.expthermflusci.2016.04.007
Aladag B, Halelfad S, Doner N, Mare T, Duret S, Estele P (2012) Experimental investigations of the viscosity of nanofluids at low temperatures. Appl Energy 97:876–880. https://doi.org/10.1016/j.apenergy.2011.12.101
Amiri A, Shanbedi M, Eshghi H, Heris SZ, Baniadam M (2012) Highly dispersed multiwalled carbon nanotubes decorated with Ag nanoparticles in water and experimental investigation of the thermo-physical properties. J Phys Chem C 116(5):3369–3375. https://doi.org/10.1021/JP210484A
Amiri M, Movahedirad S, Manteghi F (2016) Thermal conductivity of water and ethylene glycol NFs containing new modifed surface SiO2–Cu nanoparticles, experimental and modeling. Appl Therm Eng 108:48–53. https://doi.org/10.1016/j.applthermaleng.2016.07.091
Amiri Delouei A, Sajjadi H, Atashafrooz M, Hesari M, Ben Hamida MB, Arabkoohsar A (2022) Louvered fin-and-flat tube compact heat exchanger under ultrasonic excitation. Fire 6(1):13
Aravind SSJ, Ramaprabhu S (2012) Graphene wrapped multiwalled carbon nanotubes dispersed nanofluids for heat transfer applications. J Appl Phys. https://doi.org/10.1063/1.4769353
Aravind SSJ, Ramaprabhu S (2013) Graphene–multiwalled carbon nanotube-based nanofluids for improved heat dissipation. RSC Adv 13:4199–4206. https://doi.org/10.1039/C3RA22653K
Arefmanesh A, Mahmoodi M (2011) Effects of uncertainties of viscosity models for Al2O3–water nanofluid on mixed convection numerical simulations. Int J Therm Sci 50(9):1706–1719. https://doi.org/10.1016/j.ijthermalsci.2011.04.007
Asadi A, Asadi M, Rezaniakolaei A, Rosendah LA, Afrand M, Wongwises S (2018) Heat transfer efciency of Al2O3-MWCNT/thermal oil HNF as a cooling fuid in thermal and energy management applications: an experimental and theoretical investigation. Int J Heat Mass Transf 117:474–486
Atashafrooz M, Sajjadi H, Delouei AA (2023) Simulation of combined convective-radiative heat transfer of hybrid nanofluid flow inside an open trapezoidal enclosure considering the magnetic force impacts. J Magn Magn Mater 567:170354
Baby TT, Ramaprabhu S (2011a) Synthesis and nanofluid application of silver nanoparticles decorated graphene. J Mater Chem 21:9702–9709. https://doi.org/10.1016/j.matchemphys.2013.05.032
Baby TT, Ramaprabhu S (2011b) Experimental investigation of the thermal transport properties of a carbon nanohybrid dispersed nanofluid. Nanoscale 3:2208–2214. https://doi.org/10.1039/C0JM04106H
Baby TT, Ramaprabhu S (2011c) Synthesis and transport properties of metal oxide decorated graphene dispersed nanofluids. J Phys Chem C 115(17):8527–8533. https://doi.org/10.1021/jp200273g
Baby TT, Ramaprabhu S (2013) Synthesis of silver nanoparticle decorated multiwalled carbon nanotubes–graphene mixture and its heat transfer studies in nanofluid. AIP Adv. https://doi.org/10.1039/C0NR01024C
Baghbanzadeha M, Rashidib A, Rashtchiana D, Lotfib R, Amrollahib A (2012) Synthesis of spherical silica/multiwall carbon nanotubes hybrid nanostructures and investigation of thermal conductivity of related nanofluids. Thermochim Acta 549:87–94. https://doi.org/10.1016/j.tca.2012.09.006
Batmunkh M, Tanshen MR, Nine MJ, Myekhlai M, Choi H, Chung H (2014) Thermal conductivity of TiO2 nanoparticles based aqueous nanofluids with an addition of a modified silver particle. Ind Eng Chem Res 53(20):8445–8451. https://doi.org/10.1021/ie403712f
Botha SS, Ndungu P, Bladergroen BJ (2011a) Physicochemical properties of oil-based nanofluids containing hybrid structures of silver nanoparticles supported on silica. Ind Eng Chem Res 50(6):3071–3077. https://doi.org/10.1021/ie101088x
Botha SS, Ndungu P, Bladergroen BJ (2011b) Physicochemical properties of oil-based nanofluids containing hybrid structures of silver nanoparticles supported on silica. Ind Eng Chem Res 55(6):3071–3077. https://doi.org/10.1021/ie101088x
Chang H, Chyuan WY, Song JC (2009) Characterization of the Ag/Fe nanocomposite fluid. J Vac Sci Technol B 27(3):1381–1384
Chen L, Xie H (2010) Surfactant-free nanofluids containing double and single-walled carbon nanotubes functionalized by a wet-mechanochemical reaction. Thermochimca Acta 497(1–2):67–71. https://doi.org/10.1016/j.tca.2009.08.009
Chen L, Yu W, Xie H (2012) Enhanced thermal conductivity of nanofluids containing Ag/MWNT composites. Powder Technol 231:18–20. https://doi.org/10.1021/jp200273g
Chen LF, Cheng M, YangJ DJ, Yang L (2014) Enhanced thermal conductivity of nanofluid by synergistic effect of multi-walled carbon nanotubes and Fe2O3 nanoparticles. Appl Mech Mater. https://doi.org/10.4028/www.scientific.net/AMM.548-549.118
Choi C, Yoo HS, Oh JM (2008) Preparation and heat transfer properties of nanoparticle-in-transformer oil dispersions as advanced energy-efficient coolants. Curr Appl Phys 8(6):710–712. https://doi.org/10.1016/j.cap.2007.04.060
Cuenca Y, Salavera D, Vernet A, Valles M (2013) Thermal conductivity of ammonia+ water mixtures over a wide range of concentrations. Int J Refrig 36(3):998–1003. https://doi.org/10.1016/j.ijrefrig.2012.10.039
Dong M, Shen LP, Wang H, Wang HB, Miao J (2013) Investigation on the electrical conductivity of transformer oil-based AlN nanofluid. J Nanomater 2013:164–164
Duangthongsuk W, Wongwises S (2008) Effect of thermophysical properties models on the predicting of the convective heat transfer coefficient for low concentration nanofluid. Int Commun Heat Mass Transf 35(10):1320–1326. https://doi.org/10.1016/j.icheatmasstransfer.2008.07.015
Duangthongsuk W, Wongwises S (2009) Measurement of temperature dependent thermal conductivity and viscosity of TiO2-water nanofluids. Exp Therm Fluid Sci 33(4):706–714. https://doi.org/10.1016/j.expthermflusci.2009.01.005
Esfahani NN, Toghraie D, Afrand M (2018a) A new correlation for predicting the thermal conductivity of ZnO–Ag (50%–50%)/water HNF: an experimental study. Powder Technol 34(4):367–373. https://doi.org/10.1016/J.POWTEC.2017.10.025
Esfahani NN, Toghraie D, Afrand M (2018b) A new correlation for predicting the thermal conductivity of ZnO–Ag (50%–50%)/water HNF: an experimental study. Powder Technol 323:367–373. https://doi.org/10.1016/J.POWTEC.2017.10.025
Eshgarf H, Kalbasi R, Maleki A, Shadloo MS, Karimipour A (2020) A review on the properties, preparation, models and stability of hybrid nanofuids to optimize energy consumption. J Therm Anal Calorim 144:1959–1983. https://doi.org/10.1007/s10973-020-09998-w
Gandhi GSK, Velayutham M, Das SK, Thirumalachari S (2011) Measurement of thermal and electrical conductivities of graphene nanofluids. In: Proceedings of the 3rd micro and nano flows conference, Thessaloniki
Hajjar Z, Rashidi AM, Ghozatloo A (2014) Enhanced thermal conductivities of graphene oxide nanofluids. Int Commun Heat Mass Transf 57:128–131. https://doi.org/10.1016/j.icheatmasstransfer.2014.07.018
Hamid KA, Azmi W, Nabil M, Mamat R (2012) Experimental investigation of nanoparticle mixture ratios on TiO2–SiO2 NFs heat transfer performance under turbulent flow. Int J Heat Mass Transf 118:617–627. https://doi.org/10.1016/J.IJHEATMASSTRANSFER.2017.11.036
Hamid K, Azmi W, Nabil M, Mamat R (2017) Improved thermal conductivity of TiO2–SiO2 HNF in ethylene glycol and water mixture. IOP Conf Ser Mater Sci Eng 257:012067. https://doi.org/10.1088/1757-899X/257/1/012067
Hamid KA, Azmi W, Nabil M, Mamat R, Sharma K (2018) Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2 NFs. Int J Heat Mass Transf. https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.087
Ho CJ, Huang JB, Tsai PS, Yang YM (2010) “Preparation and properties of hybrid waterbased suspension of Al2O3 nanoparticles and MEPCM particles as functional forced convection fluidV. Int Commun Heat Mass Transf 37(5):490–494. https://doi.org/10.1016/j.icheatmasstransfer.2009.12.007
Ho CJ, Huang JB, Tsai PS, Yang YM (2011) On laminar convective cooling performance of hybrid water-based suspensions of Al2O3 nanoparticles and MEPCM particles in a circular tube. Int J Heat Mass Transf 54(11–12):2397–2407. https://doi.org/10.1016/j.icheatmasstransfer.2009.12.007
Hung, Chou YH (2012) Chitosan for suspension performance and viscosity of MWCNTs. Int J Chem Eng Appl 3(5)
Hwang Y, Lee JK, Lee CH, Jung YM, Cheong SI, Lee CG (2007) Stability and thermal conductivity characteristics of nanofluids. Thermochim Act 455(1–2):70–74. https://doi.org/10.1016/j.tca.2006.11.036
Hwang Y, Lee JK, Lee JK (2008) Production and dispersion stability of nanoparticles in nanofuids. Powder Technol 186(2):145–153. https://doi.org/10.1016/j.powtec.2007.11.020
Jana S, Khojin AS, Zhong WH (2017) Enhancement of fluid thermal conductivity by the addition of single and hybrid nano-additives. Thermochim Acta 462(1–2):45–55
Kumar MS, Vasu V, Gopal AV (2016) Thermal conductivity and rheological studies for Cu–Zn HNFs with various basefuids. J Taiw Inst Chem Eng. 66:321–327. https://doi.org/10.1016/j.jtice.2016.05.033
Kumaresan V, Velraj R (2012) Experimental investigation of the thermo-physical properties of water–ethylene glycol mixture based CNT nanofluids. Thermochim Acta 545:180–186. https://doi.org/10.1016/j.tca.2012.07.017
Kursus M, Liew PJ, Che Sidik NA, Wang J (2022) Recent progress on the application of nanofluids and hybrid nanofluids in machining: a comprehensive review. Int J Adv Manuf Technol 121(3–4):1455–1481
Labhasetwar V, Pelecky DL (2007) Biomedical Applications of Nanotechnology. John Wiley & Sons. https://www.wiley.com/enus/Biomedical+Applications+of+Nanotechnology-p-9780471722427
Leong KY, Razali I, Ahmad KK, Ong HC, Ghazali MJ, Rahman MRA (2018) Thermal conductivity of an ethylene glycol/water based NF with copper-titanium dioxide nanoparticles: an experimental approach. Int Commun Heat Mass Transfer 90:23–28. https://doi.org/10.1016/j.icheatmasstransfer.2017.10.005
Li H, Ha CS, Kim I (2009) Fabrication of carbon nanotube/SiO2 and carbon nanotube/SiO2/Ag nanoparticles hybrids by using plasma treatment. Nanoscale Res Let 4:1384–1388. https://doi.org/10.1007/s11671-009-9409-4
Ma X, Yang L, Xu G, Song J (2022) A comprehensive review of MXene-based nanofluids: preparation, stability, physical properties, and applications. J Mol Liquids 120
Ma H, He B, Su L, He D (2023) Heat transfer enhancement of nanofluid flow at the entry region of microtubes. Int J Therm Sci 184:107944
Madhesh D, Parameshwaran R, Kalaiselvam S (2014) Experimental investigation on convective heat transfer and rheological characteristics of Cu–TiO2 hybrid nanofluids. Exp Therm Fluid 52:104–115. https://doi.org/10.1016/j.expthermflusci.2013.08.026
Manikanta JE, Srinivas B, Santha Rao D (2017) Effect of nano cutting fluid & process parameters on material removal rate and surface finish of SS304 alloy on turning operation. Int J Emerg Technol Eng Res 5(12):71–80
Manikanta JE, Gupta BNVSG, Manikanta JT, Pradeep R (2018) Integrality characterization of machining with nano cutting fluids. Int J Mech Eng Technol 9(10):1033–1042
Mechiri SK, Vasu V, Gopal A, Babu RS (2015) Thermal conductivity of Cu-Zn hybrid Newtonian nanofluids: experimental data and modeling using neural network. Procedia Eng 127:561–567. https://doi.org/10.1016/J.PROENG.2015.11.345
Mechiri S, Vasu V, Gopal AV (2017) Investigation of thermal conductivity and rheological properties of vegetable oil based HNFs containing Cu–Zn hybrid nanoparticles. Exp Heat Transf 30(3):205–217. https://doi.org/10.1080/08916152.2016.1233147
Megatif L, Ghozatloo A, Arimi A, Niasar MS (2016) Investigation of laminar convective heat transfer of a novel TiO2 carbon nanotube hybrid water-based NF. Exp Heat Transfer 29(1):124–138. https://doi.org/10.1080/08916152.2014.973974
Mena JB, Moraes UD, Benito Y, Ribatski G, Parise J (2013) Extrapolation of Al2O3-water nanofluid viscosity for temperatures and volume concentrations beyond the range of validity of existing correlations. Appl Therm Eng 51(1–2):1092–1097. https://doi.org/10.1016/j.applthermaleng.2012.11.002
Munkhbayar B, Tanshen MR, Jeoun J, Chung H, Jeong H (2013a) Surfactant-free dispersion of silver nanoparticles into MWCNT-aqueous nanofluids prepared by one-step technique and their thermal characteristics. Ceram Int 39(6):6415–6425. https://doi.org/10.1016/j.ceramint.2013.01.069
Munkhbayar B, Tanshen MR, Jeoun J, Chung H, Jeong H (2013b) Surfactant-free dispersion of silver nanoparticles into MWCNT aqueous nanofluids prepared by one-step technique and their thermal characteristics. Ceram Int 39(6):6415–6425. https://doi.org/10.1016/j.ceramint.2013.01.069
Nabil MF, Azmi WH, Hamid KA, Zawawi NNM, Priyandoko G, Mamat R (2017a) Thermo-physical properties of hybrid nanofluids and hybrid nanolubricants: a comprehensive review on performance. Heat Mass Transf 83:30–39. https://doi.org/10.1016/j.icheatmasstransfer.2017.03.008
Nabil M, Azmi W, Hamid KA, Mamat R, Hagos FY (2017b) An experimental study on the thermal conductivity and dynamic viscosity of TiO2-SiO2 NFs in water: ethylene glycol mixture. Int Commun Heat Mass Transfer 116:181–189. https://doi.org/10.1016/j.icheatmasstransfer.2017.05.024
Nabil M, Azmi W, Hamid K, Mamat R (2017) Heat transfer and friction factor of composite TiO2–SiO2 NFs in water-ethylene glycol (60: 40) mixture. In: IOP conference series: materials science and engineering, vol 257, no 1, pp 012066. https://doi.org/10.1088/1757-899X/257/1/012066
Nine MJ, Batmunkh M, Kim JH, Chung HS, Jeong HM (2012) Investigation of Al2O3–MWCNTs hybrid dispersion in water and their thermal characterization. J Nanosci Nanotechnol 12(6):4553–4559. https://doi.org/10.1166/jnn.2012.6193
Nine MJ, Munkhbayar B, Rahman MS, Chung H (2013) Highly productive synthesis process of well dispersed Cu2O and Cu/Cu2O nanoparticles and its thermal characterization. MaterChemPhys 141(2–3):636–642. https://doi.org/10.1016/j.matchemphys.2013.05.032
Parsian A, Akbari M (2018) New experimental correlation for the thermal conductivity of ethylene glycol containing Al2O3–Cu hybrid nanoparticles. J Therm Anal Calorim 131:1605–1613. https://doi.org/10.1007/s10973-017-6694-5
Qing SH, Rashmi W, Khalid M, Gupta T, Nabipoor M, Hajibeigy MT (2017a) Thermal conductivity and electrical properties of hybrid SiO2-graphene naphthenic mineral oil NF as potential transformer oil. Mater Res Exp 4(1):015504. https://doi.org/10.1088/2053-1591/aa550e
Qing SH, Rashmi W, Khalid M, Gupta T, Nabipoor M, Hajibeigy MT (2017b) Thermal conductivity and electrical properties of hybrid SiO2-graphene naphthenic mineral oil NF as potential transformer oil. Mater Res Exp 4(1):015504. https://doi.org/10.3390/nano12061021
Ramachandran R, Ganesan K, Rajkumar MR, Asirvatham LG, Wongwises S (2016) Comparative study of the effect of hybrid nanoparticle on the thermal performance ofcylindrical screen mesh heat pipe. Int Commun Heat Mass Transf 76:294–300. https://doi.org/10.1016/j.icheatmasstransfer.2016.05.030
Robertis ED, Cosme EH, Neves RS, Kuznetsov AY, Campos APC, Landi SM (2012) Application of the modulated temperature differential scanning calorimetry technique for the determination of the specific heat of copper nanofluids. Appl Therm Eng 41:10–17. https://doi.org/10.1016/j.ijheatmasstransfer.2012.10.062
Saeedinia M, Behabadi MA, Razi P (2012) Thermal and rheological characteristics Commun Heat Mass of CuO–Base oil nanofluid flow inside a circular tube. Int Transf 39(1):152–159. https://doi.org/10.1016/j.icheatmasstransfer.2011.08.001
Saf M, Ghozatloo A, Shariaty NM, Hamidi A (2017) Preparation of MWNT/TiO2 NFs and study of its thermal conductivity and stability. Iran J Chem Eng 11(4). https://dorl.net/dor/20.1001.1.17355397.2014.11.4.1.6
Said Z, Saidur R, Hepbasli A, Rahim NA (2014) New thermophysical properties of water based TiO2 nanofluid—the hysteresis phenomenon revisited. Int Commun Heat Mass Transf 58:85–95. https://doi.org/10.1016/j.icheatmasstransfer.2014.08.034
Selvakumar P, Suresh S (2012) Use of Al2O3–Cu/water hybrid nanofluids in an electronic heat sink. IEEE Trans Compon Packag Manuf Technol 2(10):1600–1607. https://doi.org/10.1016/j.icheatmasstransfer.2008.07.015
Senthilraja S, Vijayakumar K, Gangadevi R (2015) A comparative study on thermal conductivity of Al2O3/water, CuO/water and Al2O3–CuO/water NFs. Dig J Nanomater Biostruct 10(4):1449–1458
Shafi WK, Charoo MS (2021) An overall review on the tribological, thermal and rheological properties of nanolubricants. Tribol-Mater Surf Interfaces 15(1):20–54
Suganthi KS, Rajan KS (2012) Temperature induced changes in ZnO water nanofluid: zeta potential, size distribution and viscosity profiles. Int J Heat Mass Transf 55(25–26):7969–7980. https://doi.org/10.1016/j.ijheatmasstransfer.2012.08.032
Sundar LS, Singh MK, Sousa A (2013) Investigation of thermal conductivity and viscosity of Fe3O4 nanofluid for heat transfer applications. Int Commun Heat Mass Transf 44:7–14. https://doi.org/10.1016/j.icheatmasstransfer.2013.02.014
Sundar LS, Singh MK, Sousa AC (2014a) Enhanced heat transfer and friction factor of MWCNT–Fe3O4/water HNFs. Int Commun Heat Mass Transf 52:73–83. https://doi.org/10.1016/j.icheatmasstransfer.2014.01.012
Sundar LS, Singh MK, Sousa A (2014b) Enhanced heat transfer and friction factor of MWCNT–Fe3O4/water hybridnanofluids. Int Commun Heat Mass Transf 52:73–83. https://doi.org/10.1016/j.icheatmasstransfer.2014.01.012
Sundar LS, Singh MK, Ramana EV, Sing B, Gracio J, Sousa A (2014c) Enhanced thermal conductivity and viscosity of nanodiamond–nickel nanocomposite nanofluids. Sci Rep 4:4039. https://doi.org/10.1038/srep04039
Suresh S, Venkitaraj KP, Selvakumar P, Chandrasekar M (2011a) Synthesis of Al2O3–Cu/water hybrid nanofluids using two step method and its thermo physical properties. Colloids Surf A Physicochem Eng Asp 388(1–3):41–48. https://doi.org/10.1016/j.colsurfa.2011.08.005
Suresh S, Venkitaraj KP, Selvakumar P (2011b) Synthesis, characterisation of Al2O3–Cu nanocomposite powder and water based nanofluids. Adv Mater Res 328:1560–1567. https://doi.org/10.1016/j.colsurfa.2011.08.005
Suresh S, Venkitaraj K, Selvakumar P, Chandrasekar M (2011c) Synthesis of Al2O3–Cu/water HNFs using two step method and its thermo physical properties. Colloids Surf A 388(1):41–48. https://doi.org/10.1016/j.colsurfa.2011.08.005
Tahat MS, Benim AC (2017) Experimental analysis on thermophysical properties of Al2O3/CuO hybrid nano fuid with its efects on fat plate solar collector. Defect Difusion Forum 374:148–156. https://doi.org/10.3389/fchem.2021.737033
Tiznobaik H, Shin D (2013) Enhanced specific heat capacity of high-temperature molten salt-based nanofluids. Int J Heat Mass Transf 578(2):542–548. https://doi.org/10.1016/j.ijheatmasstransfer.2012.10.062
Vajjha RS, Das DK (2012) A review and analysis on influence of temperature and concentration of nanofluids on thermophysical properties, heat transfer and pumping power. I J Heat Mass Tran 55(15–16):4063–4078. https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.048
Van Trinh P, Anh NN, Hong NT, Hong PN, Minh PN, Thang BH (2018) Experimental study on the thermal conductivity of ethylene glycol-based nanofluid containing Gr-CNT hybrid material. J Mol Liq 269:344–353
Vidhya R, Balakrishnan T, Kumar BS, Palanisamy R, Panchal H, Cabanillas LA, Shaik S, Saleh B, Alarifi IM (2022) An experimental Study of ZrO2-CeO2 hybrid nanofluid and response surface methodology for the prediction of heat transfer performance: the new correlations. J Nanomater 2022:11
Wang X, Song Y, Li C, Zhang Y, Ali HM, Sharma S, Zhou Z (2023) Nanofluids application in machining: a comprehensive review. Int J Adv Manuf Technol 1–52
Wei B, Zou C, Yuan X, Li X (2007) Thermo-physical property evaluation of diathermic oil based HNFs for heat transfer applications. Int J Heat Mass Transf 107:2411–2502. https://doi.org/10.1016/j.ijheatmasstransfer.2016.11.044
Wong VK, Leon OD (2010) Applications of nanofluids: current and future. Adv Mech Eng 2:78–88. https://doi.org/10.1155/2010/519659
Yang L, Ji W, Zhang Z, Jin X (2019) Thermal conductivity enhancement of water by adding graphene nano-sheets: consideration of particle loading and temperature effects. Int Commun Heat Mass Transfer 109:104353
Yarmand H, Gharehkhani S, Shirazi SFS, Amiri A, Montazer E, Arzani HK, Sadri R, Dahari M, Kazi SN (2016) Nanofluid based on activated hybrid of biomass carbon/graphene oxide: synthesis, thermophysical and electrical properties. Int Commun Heat Mass Transf 27:10–15. https://doi.org/10.1016/j.icheatmasstransfer
Yeganeh M, Shahtahmasebi N, Kompany AHMAD, Goharshadi EK, Youssefi A, Siller L (2010) Volume fraction and temperature variations of the effective thermal conductivity of nanodiamond fluids in deionized water. Int J Heat Mass Transf 53(15):3186–3192. https://doi.org/10.1016/j.ijheatmasstransfer.2010.03.008
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Manikanta, J.E., Nikhare, C., Gurajala, N.K. et al. A Review on Hybrid Nanofluids: Preparation Methods, Thermo Physical Properties and Applications. Iran J Sci Technol Trans Mech Eng (2024). https://doi.org/10.1007/s40997-024-00772-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40997-024-00772-z