Abstract
The present study focuses on validation of compressive strut models, in which infill wall is replaced with single and multi-equivalent diagonal struts. A full-scaled, one-bay and one-story reinforced concrete (RC) frame, representing weak sides of existing buildings widely used in Turkey, is produced and tested under lateral cyclic loading. Furthermore, the efficiency of three different strut models, commonly used in the literature to present the effects of walls on the RC frames, is investigated using finite element method. Consequently, the analytical results show that single equivalent strut model is an easy and influent way of representing global behavior of infilled RC frames. Additionally, using multi-struts will only cause small variations in global behavior of the system, whereas the failure mode of the RC frame is more accurately represented compared to single strut.
Similar content being viewed by others
References
ABAQUS (2013) ABAQUS documentation. Dassault systèmes
Abdul-kadir MR (1974) The structural behaviour of masonry infill panels in framed structures. Doctorate dissertation, University of Edingburgh
Akhoundi F, Lourenço PB, Vasconcelos G (2016) Numerically based proposals for the stiffness and strength of masonry infills with openings in reinforced concrete frames. Earthq Eng Struct Dyn 45(6):869–891. https://doi.org/10.1002/eqe.2688
Arslan ME (2013) Experimental and theoretical investigation of behavior of in-filled RC frames strengthened with GFRP under cyclic loading. Doctorate dissertation, Karadeniz Technical University
Asteris PG (2003) Lateral stiffness of brick masonry infilled plane frames. J Struct Eng 129(8):1071–1079. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1071)
Asteris PG (2008) Finite element micro-modeling of infilled frames. Electron J Struct Eng 8(8):1–11
Asteris PG, Antoniou ST, Sophianopoulos DS, Chrysostomou CZ (2011a) Mathematical macromodeling of infilled frames: state of the art. J Struct Eng 137(12):1508–1517. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000384
Asteris PG, Chrysostomou CZ, Giannopoulos IP, Smyrou E (2011b) Masonry infilled reinforced concrete frames with openings. In: III ECCOMAS thematic conference on computational methods in structural dynamics and earthquake engineering (May), pp 25–28
Asteris PG, Kakaletsis DJ, Chrysostomou CZ, Smyrou E (2011c) Failure modes of in-filled frames. Electron J Struct Eng 11(1):11–20
Asteris PG, Cavaleri L, Di Trapani F, Sarhosis V (2016) A macro-modelling approach for the analysis of infilled frame structures considering the effects of openings and vertical loads. Struct Infrastruct Eng 12(5):551–566. https://doi.org/10.1080/15732479.2015.1030761
Asteris PG, Repapis CC, Foskolos F, Fotos A, Tsaris AT (2017) Fundamental period of RC frame structures with vertical irregularity. Earthq Struct 61(5):663–674. https://doi.org/10.12989/sem.2017.61.5.663
Bazan E, Meli R (1980) Seismic analysis of structures with masonry walls. In: Proceedings of 7th WCEE Istanbul, Turkey
Bertoldi SH, Decanini LD, Gavarini C (1993) Telai Tamponati Soggetti Ad Azioni Sismiche, Un Modello Semplificato: Confronto Sperimentale e Numerico Pp 815–24 in Atti del VI Convegno ANIDIS
Caliò I, Marletta M, Pantò B (2012) A new discrete element model for the evaluation of the seismic behaviour of unreinforced masonry buildings. Eng Struct 40:327–338. https://doi.org/10.1016/j.engstruct.2012.02.039
Campione G, Cavaleri L, Macaluso G, Amato G, Di Trapani F (2015) Evaluation of infilled frames: an updated in-plane-stiffness macro-model considering the effects of vertical loads. Bull Earthq Eng 13(8):2265–2281. https://doi.org/10.1007/s10518-014-9714-x
Cavaleri L, Fossetti M, Papia M (2005) Infilled frames: developments in the evaluation of the cyclic behaviour under lateral loads. Struct Eng Mech 21:469–494. https://doi.org/10.12989/sem.2005.21.4.469
Chrysostomou CZ (1991) Effects of degrading infill walls on the nonlinear seismic response of two-dimensional steel frames. Doctorate dissertation, Cornell University
Chrysostomou CZ, Asteris PG (2012) On the in-plane properties and capacities of infilled frames. Eng Struct 41:385–402. https://doi.org/10.1016/jengstruct201203057
Chrysostomou CZ, Gergely P, Abel JF (1992) Nonlinear seismic response of infilled steel frames. In: Proceedings of 10th world conference on earthquake engineering Madrid, Spain
Crisafulli FJ (1997) Seismic behaviour of reinforced concrete structures with masonry infills. Doctorate dissertation, University of Canterbury
Crisafulli FJ, Carr AJ (2007) Proposed macro-model for the analysis of infilled frame structures. Bull N Z Soc Earthq Eng 40(2):69–77
Decanini LD, Liberatore L, Mollaioli F (2014) Strength and stiffness reduction factors for infilled frames with openings. Earthq Eng Eng Vib 13(3):437–454. https://doi.org/10.1007/s11803-014-0254-9
Di Trapani F, Macaluso G, Cavaleri L, Papia M (2015) Masonry infills and RC frames interaction: literature overview and state of the art of macromodeling approach. Eur J Environ Civ Eng 19(9):1059–1095. https://doi.org/10.1080/19648189.2014.996671
Durrani AJ, Luo YH (1994) Seismic retrofit of flat-slab buildings with masonry infills. In: Proceedings of the NCEER workshop on seismic response of masonry infills technical report NCEER-94-0004, Ed DP Abrams, San Francisco, CA
El-Dakhakhni WW, Elgaaly M, Hamid AA (2003) Three strut model for concrete masonry-infilled steel. Frames J Struct Eng 129(2):177–185. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(177)
Emami SMM, Mohammadi M (2016) Influence of vertical load on in-plane behavior of masonry infilled steel frames. Earthq Struct 11(4):609–627. https://doi.org/10.12989/eas.2016.11.4.609
FEMA-306 (1998) Evaluation of earthquake damaged concrete and masonry wall buildings: basic procedures manual, Washington DC
Flanagan RD, Bennett RM (1999) Bidirectional behaviour of structural clay tile infilled frames. ASCE J Struct Eng 125(3):236–244. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(236)
Hendry AW (1981) Structural brickwork. MacMillan Press Ltd, London
Holmes M (1961) Steel frames with brickwork and concrete infilling. Proc Inst Civ Eng 19(2):473–478. https://doi.org/10.1680/iicep.1961.11305
Kakaletsis DJ, Karayannis CG (2009) Experimental investigation of infilled reinforced concrete frames with openings. ACI Struct J 106(2):132–141
Liauw TC, Kwan KH (1984) Nonlinear behavior of non-integral infilled frames. Comput Struct 18(3):551–560. https://doi.org/10.1016/0045-7949(84)90070-1
Mainstone RJ (1971) On the stiffnesses and strengths of infilled frames. In: Proceedings of institution of civil engineers supplement, pp 57–90. https://doi.org/10.1680/iicep.1971.6267
Mainstone RJ (1974) Supplementary notes on the stiffness and strength of infilled frames. Building Research Station, Garston
Mallick DV, Garg RP (1971) Effect of openings on the lateral stiffness of infilled frames. ICE Proc 49(2):193–209. https://doi.org/10.1680/iicep.1971.6263
Mander JB, Priestley MJN, Park R (1988) Theoretical stress–strain model for confined concrete. J Struct Eng 114(8):1804–1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
Mosalam KM, White RN, Gergely P (1997) Static response of infilled frames using quasi-static experimentation. J Struct Eng ASCE 123(11):1462–1469. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1462)
Ozturkoglu O, Ucar T, Yesilce Y (2017) Effect of masonry infill walls with openings on nonlinear response of reinforced concrete frames. Earthq Struct 12(3):333–347. https://doi.org/10.12989/eas.2017.12.3.333
Panagiotakos TB, Fardis MN (1996) Seismic response of infilled frame structures. In: 11th world conference on earthquake engineering
Pantò B, Caliò I, Lourenço PB (2017) Seismic safety evaluation of reinforced concrete masonry infilled frames using macro modelling approach. Bull Earthq Eng. https://doi.org/10.1007/s10518-017-0120-z
Paulay T, Priestley MJN (1992) Seismic design of reinforced concrete and masonry buildings. Wiley, New York
Polyakov SV (1960) On the interaction between masonry filler walls and enclosing frame when loading in the plane of the wall. Translation in Earthquake Engineering, Earthquake Engineering Research Institute (EERI)
Smith BS (1962) Lateral stiffness of infilled frames. Proc Am Soc Civ Eng J Struct Div 88(6):183–199
Smith BS (1966) Behavior of square infilled frames. J Struct Div 92(1):381–404
Smith BS (1967) Methods for predicting the lateral stiffness and strength of multi-storey infilled frames. Eng Sci 2:247–257
Stafford BS, Carter C (1969) A method of analysis for infilled frames. Proc Inst Civil Eng 44(1):31–48
Surendran S, Kaushik HB (2012) Masonry infill RC frames with openings: review of in-plane lateral load behaviour and modeling approaches. Open Constr Build Technol J 6(Suppl 1-M9):126–54. https://benthamopen.com/contents/pdf/TOBCTJ/TOBCTJ-6-126.pdf. Accessed 10 Oct 2018
Syrmakezis CA, Vratsanou VY (1986) Influence of infill walls to RC frames response. In: Proceedings of 8th European conference on earthquake engineering Lisboa, Portugal
Tarque N, Candido L, Camata G, Spacone E (2015) Masonry infilled frame structures: state-of-the-art review of numerical modelling. Earthq Struct 8(1):225–51. Retrieved August 15, 2017. http://koreascience.or.kr/article/ArticleFullRecord.jsp?cn=TPTPJW_2015_v8n1_225. Accessed 10 Oct 2018
Tasnimi AA, Mohebkhah A (2011) Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approaches. Eng Struct 33(3):968–980. https://doi.org/10.1016/jengstruct201012018
Tassios TP (1984) Masonry infill and R/C walls under cyclic actions, (An invited state-of-the-art report). In: Proceedings of the 3rd international symposium on wall structures Warsaw, Poland
Zarnic R, Tomazevic M (1998) An experimentally obtained method for evaluating of the behaviour of masonry infilled RC frames. In: Proceedings of 9th world conference on earthquake engineering Tokyo-Kyoto, pp 163–68
Acknowledgement
The funding was provided by Bilimsel Araştırma Projesi Birimi, Uludag University.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Timurağaoğlu, M.Ö., Doğangün, A. & Livaoğlu, R. Analytical Validation of Macromodeling Techniques of Infilled RC Frames. Iran J Sci Technol Trans Civ Eng 43 (Suppl 1), 517–531 (2019). https://doi.org/10.1007/s40996-018-0183-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40996-018-0183-3