Avoid common mistakes on your manuscript.
Correction: Progress in Additive Manufacturing (2023) 8:27–35 https://doi.org/10.1007/s40964-022-00388-2
The publication of this article unfortunately contained mistakes. The ORCIDs of the authors were missing. The ORCIDs are given below.
Georg Schlick: 0000-0001-5448-0482 (https://orcid.org/0000-0001-5448-0482).
David Schwarz: 0000-0003-4305-7683 (https://orcid.org/0000-0003-4305-7683).
Christian Seidel: 0000-0002-5019-3950 (https://orcid.org/0000-0002-5019-3950).
Hoang Minh Vu: 0000-0002-9539-1758 (https://orcid.org/0000-0002-9539-1758).
Matthias Oechsner: 0000-0003-0248-4232 (https://orcid.org/0000-0003-0248-4232).
Steffen Meiniger: 0000-0003-1354-7892 (https://orcid.org/0000-0003-1354-7892).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Ringel, B., Schwarz, D., Vu, H.M. et al. Correction: Investigation on a predetermined point of failure for stainless steel 316L pressure loaded components made by laser powder bed fusion through stress analysis and experimental testing. Prog Addit Manuf (2024). https://doi.org/10.1007/s40964-024-00644-7
Published:
DOI: https://doi.org/10.1007/s40964-024-00644-7