Abstract
This study presents a correlation between the depression in eutectic growth temperature as a result of Sr modification and the tensile properties of Al–Si cast alloys. In order to study the role that Sr exerts on the solidification behavior, modification and mechanical properties, controlled solidification experiments including thermal analysis were performed. Using three mold materials for different cooling rates, tensile testing was conducted on Al–Si alloys with various Sr levels (~35–500 ppm). The gradient solidification technique was used to produce directionally solidified tensile test specimens containing low levels of defects. The depression in eutectic Si growth temperature was correlated with the Sr additions and the tensile properties (elongation to failure and tensile strength).
Similar content being viewed by others
References
M. Okayasu et al., A study of the mechanical properties of an Al–Si–Cu alloy (ADC12) produced by various casting processes. Mater. Sci. Eng. A 543, 185–192 (2012)
S. Shabestari, S. Ghodrat, Assessment of modification and formation of intermetallic compounds in aluminum alloy using thermal analysis. Mater. Sci. Eng. A 467(1), 150–158 (2007)
M. Zamani, S. Seifeddine, M. Aziziderouei, The role of Sr on microstructure formation and mechanical properties of Al–Si–Cu–Mg cast alloy, in TMS 2013 annual meeting and exhibition, San Antonio, TX, 3–7 March 2013, pp. 297–302
D. Xugang, Z. Jie, J. Yaojun, L. Bin, L. Zhenzhen, W. Wenhao, B. Huan, Influence of Sr on microstructure and mechanical properties of ZL114 cast alloy. China Foundry 8(4), 007 (2011)
B. Kulunk et al., Beneficial effects of strontium on A380 alloy (96–170). Trans. Am. Foundrymen’s Soc. 104, 1189–1194 (1996)
L.F. Mondolfo, Structure and Properties of Aluminum Alloys (Metallurgiya, Moscow, 1979)
D. Apelian, G.K. Sigworth, K. Whaler, Assessment of grain refinement and modification of Al–Si foundry alloys by thermal analysis. AFS Trans. 92(2), 297–307 (1984)
J. Charbonnier, Microprocessor assisted thermal analysis testing of aluminum alloy structures. AFS Trans. 92, 907–922 (1984)
N. Tenekedjiev, H. Mulazimoglu, B. Closset, J. Gruzleski, Microstructures and Thermal Analysis of Strontium-Treated Aluminum–Silicon Alloys (American Foundrymen’s Society, Des Plaines, 1995)
M. Djurdjevic, H. Jiang, J. Sokolowski, On-line prediction of aluminum–silicon eutectic modification level using thermal analysis. Mater. Charact. 46(1), 31–38 (2001)
R. Francis, J. Sokolowski, Prediction of the aluminum silicon modification level in the AlSiCu alloys using artificial neural networks. Metalurgija 14(1), 3–15 (2008)
J.E. Gruzleski, B. Closset, The Treatment of Liquid Aluminum–Silicon Alloys (American Foundry Society, Des Plaines, 1990)
G.F. Vander Voort, Metallography and Microstructures, vol. 9 (ASM International, Geauga County, 2004)
L. Backerud, G. Chai, J. Tamminen, Solidification Characteristics of Aluminum Alloys. Vol. 2: Foundry Alloys (AFS/Skanaluminium, Des Plaines, 1990), pp. 25–38
L. Dobrzański, R. Maniara, J. Sokolowski, The effect of cast Al–Si–Cu alloy solidification rate on alloy thermal characteristics. J. Achiev. Mater. Manuf. Eng. 17(1–2), 217–220 (2006)
A. Dahle et al., Eutectic nucleation and growth in hypoeutectic Al–Si alloys at different strontium levels. Metall. Mater. Trans. A 32(4), 949–960 (2001)
P.B. Crosley, L. Mondolfo, The modification of aluminum–silicon alloys. Mod. Cast. 49(3), 99–100 (1966)
M. Day, A. Hellawell, The microstructure and crystallography of aluminium-silicon eutectic alloys, in Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences. 1968. The Royal Society
S.D. McDonald, K. Nogita, A.K. Dahle, Eutectic nucleation in Al-Si alloys. Acta Mater. 52(14), 4273–4280 (2004)
M. Zamani, S. Seifeddine, Assessment of modification level in EN AC-46000 aluminum casting alloys using thermal analysis and microscopic evaluation. Light Met. 2015, 955–960 (2015)
M. Makhlouf, H. Guthy, The aluminum–silicon eutectic reaction: mechanisms and crystallography. J. Light Met. 1(4), 199–218 (2001)
M. Zarif, B. Mckay, P. Schumacher, Study of heterogeneous nucleation of eutectic Si in high-purity Al–Si alloys with Sr addition. Metall. Mater. Trans. A 42(6), 1684–1691 (2011)
G. Sigworth, Theoretical and practical aspects of the modification of Al–Si alloys. AFS Trans. 66, 7–16 (1983)
Acknowledgments
This research was supported by the KK-foundation in Sweden and Kongsberg Automotive AB as a part of the CompCAST program.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zamani, M., Seifeddine, S. Determination of Optimum Sr Level for Eutectic Si Modification in Al–Si Cast Alloys Using Thermal analysis and Tensile Properties. Inter Metalcast 10, 457–465 (2016). https://doi.org/10.1007/s40962-016-0032-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40962-016-0032-8