Avoid common mistakes on your manuscript.
1 Correction: Geomechanics and Geophysics for Geo-Energy and Geo-Resources (2024) 10:86 https://doi.org/10.1007/s40948-024-00796-4
Following publication of the original article (Guo et al. 2024), the e-mail address of the corresponding author Xiaoli Liu was incorrectly published as 763539920@qq.com, it should be xiaoli.liu@tsinghua.edu.cn.
Also, the authors noticed that the following section headings were numbered incorrectly. The headings have renumbered as shown below:
Research on inclined abutment pressure in front of coalface should be 4.4 instead of 5
Research on strike advanced abutment pressure should be 4.5 instead of 6
Research on inclined abutment pressure in the goaf, should be 4.6 instead of 7
Research on strike abutment pressure in the goaf, should be 4.7 instead of 8
Discussion, should be section 5 instead of 9
Conclusions, should be section 6 instead of 10
The original article has been updated.
Reference
Guo Y, Liu X, Li W et al (2024) Research on abutment stress distribution of roof-cutting coalface: numerical simulation and field measurement. Geomech Geophys Geo-Energ Geo-Resour 10:86. https://doi.org/10.1007/s40948-024-00796-4
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Guo, Y., Liu, X., Li, W. et al. Correction: Research on abutment stress distribution of roof-cutting coalface: numerical simulation and field measurement. Geomech. Geophys. Geo-energ. Geo-resour. 10, 113 (2024). https://doi.org/10.1007/s40948-024-00829-y
Published:
DOI: https://doi.org/10.1007/s40948-024-00829-y