Avoid common mistakes on your manuscript.
1 Correction to: Glass Struct Eng https://doi.org/10.1007/s40940-021-00149-7
The original version of this article unfortunately contained a typesetting mistake in two references. The corrected references are given below. The original article has been corrected.
Brokmann, C., Berlinger, M., Schrader, P., Kolling, S.: Fractographic fracture stress analysis of acrylic glass. ce/papers 3(1), 225–237 (2019).
Ensslen, F., Müller-Braun, S.: Study on edge strength of float glass as a function of relevant cutting process parameters. ce/papers 1(1), 189–202 (2017).
Open Access
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Berlinger, M., Kolling, S. & Schneider, J. Correction to: A generalized Anderson–Darling test for the goodness-of-fit evaluation of the fracture strain distribution of acrylic glass. Glass Struct Eng 6, 209 (2021). https://doi.org/10.1007/s40940-021-00152-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40940-021-00152-y