Introduction

The field of food safety has radically changed over the past two decades. The application of next-generation sequencing to outbreak detection now allows for the detection of much smaller outbreaks. On the other hand, increasingly globalized food supply chains lead to much more dispersed outbreaks and pose new and sometimes impossible challenges in tracing foodborne pathogens to their sources. Changing consumer habits increase the demand for minimally processed foods with new risk profiles, and the emerging middle class in many formerly poor countries causes an increased demand for meat. Accordingly, the global demand for meat has quadrupled over the past 50 years, and a clear trend towards convergence of meat consumption habits worldwide was reported [1].

However, meat mass production has major environmental and ethical implications that are raising concerns with consumers, a trend that may gain momentum with the resurgence of the environmental movement. The search for alternative protein sources has raised interest in insect-based products, which would require new approaches to assure control of parasitical, microbial, and chemical hazards related to insect consumption [2]. Also, recent advances in in vitro meat technologies demonstrated that biofabrication of meat is possible, evoking the vision of disease-free meat and a subsequent reduction of foodborne illness [3, 4].

Even in conventional meat production, consumer perceptions and demands may act as major drivers for change. While meat consumption has traditionally been associated with physical strength and vitality, the mass media discourse on meat-related health and disease has become highly controversial [5]. Consumer trust in Europe has been eroded by reports on the carcinogenicity of red and processed meat [6] as well as food scandals such as the dioxin scandal in 2011 or the horse meat scandal in 2013, which have impacted consumer choices [7]. It has been suggested that meat safety and authenticity can only be guaranteed by extensive monitoring [8].

Highest microbiological and hygienic quality standards for meat products are crucial to assure consumer health. The traditional meat inspection system developed in the nineteenth century relied heavily on visual inspection, palpation, and incisions and has been an effective tool in protecting consumers from the most relevant meat-borne zoonoses at that time such as brucellosis, tuberculosis, and cysticercosis [9]. However, since then, the microbiological and hygienic challenges have changed substantially, with the main zoonotic agents reported today being Campylobacter spp., Salmonella enterica, pathogenic Escherichia coli, and Yersinia enterocolitica [10]. As traditional meat inspection is not effective in reducing the risk related to these organisms and may even increase the risk of, e.g., carcass cross-contamination, new risk-based meat safety assurance systems are required [9]. The currently ongoing implementation of a risk-based meat safety assurance system in Europe is a disruptive innovation process and will thus likely face opposition from various stakeholders including meat inspectors. Building a system flexible enough to react to changing requirements will be crucial to avoid that today’s risk-based meat safety assurance systems will rapidly become obsolete in case of emerging new pathogens.

To meet the demand, animal production, for instance in the poultry sector, is becoming highly automated. These trends contribute to changes in ecology and technology that can lead to the rise of emerging foodborne pathogens by creating new connections of habitats with food, or by enabling the occurrence of established pathogens in new foods. Automation and use of robotics increase in the primary and secondary processing of meat and have also brought about massive changes and interesting new concepts in the last years, especially in the poultry sector. Automated plants using stunning and slaughtering robots (Marel Meat, Boxmeer, The Netherlands; SFK Meat Systems A/S, Kolding, Denmark) allow for high-throughput, which creates use cases for artificial intelligence solutions in meat safety. Automation and online monitoring can be advanced by sensor technology including multispectral and hyperspectral imaging as well as Fourier-transform infrared spectroscopy [11]. These techniques can be employed to detect bone fragments and skin tumors, loads of bacterial pathogens, and chemical contaminants [11, 12]. Also, it has been postulated that the use of hyperspectral imaging techniques in meat safety could be combined with other technologies for maximum effect, e.g., machine vision to track and inspect broilers in an automated fashion during the breeding process [13]. In the meat factory cell automation concept, work is organized in cell stations instead of lines, some elements of slaughter and cutting are merged, and the carcass is disassembled from the outside [14]. This would allow for easier application of novel diagnostic tools such as electromagnetic and imaging tools.

In addition to these trends that will shape the future of the meat industry, antimicrobial resistance, new methods of surface treatments, and the safety of more niche products like game meat have seen recent developments. For this special issue of Current Clinical Microbiology Reports, we collected current trends in meat microbiology and hygiene which are briefly introduced in the following paragraphs.

Antimicrobial Resistance

The rapid global emergence of antimicrobial resistance is a key challenge to public health worldwide. In 2015, antimicrobial resistance led to 33,000 human deaths and 874,541 disability-adjusted life years in the EU/EEA alone [15]. There is overwhelming evidence that food plays a role in the transmission of antimicrobial resistance via bacterial commensals and pathogens, based on the selection of antimicrobial resistance due to antimicrobial treatment of food-producing animals [16]. Antimicrobials have been globally used in veterinary medicine for decades for prophylactic, metaphylactic, and therapeutic reasons, as well as in the form of antimicrobial growth promoters [17]. Following the ban on antimicrobial growth promoters in food-producing animals, the EU also committed to the goal of a 50% reduction in the sales of antimicrobial agents by 2030 for farmed animals as part of the Farm to Fork Strategy and European Green Deal.

In the face of a looming post-antibiotic era, there is an urgent need for improved monitoring and prevention strategies as well as new therapeutic targets [18]. In their review “Livestock-associated MRSA—current situation and impact from a veterinary public health perspective” (Fetsch et al., 2021), Fetsch and coworkers provide an overview of the occurrence and characteristics of livestock-associated methicillin-resistant Staphylococcus aureus (LA-MRSA). They lay out current initiatives and strategies for reporting, prevention, and control and highlight newest findings in the ongoing controversial discussion of the potential role of MRSA as a foodborne pathogen. Contamination levels of raw meat can be substantial, and cross-contamination during food preparation and consumption of undercooked meat were proposed to play a role in LA-MRSA dissemination, prompting EFSA to reinforce MRSA monitoring in foods and food-producing animals [19]. Whole-genome sequencing could play a decisive role in enabling new insights into the transmission and spread of LA-MRSA, thus allowing for the developments of more effective control strategies [19].

Decontamination of Meat Surfaces

Decontamination technologies aiming to reduce bacterial load of, e.g., Campylobacter, on meat surfaces are becoming increasingly important and may be an important cornerstone of post-harvest intervention strategies maximizing food safety [20]. Still, many of these technologies may lead to sensory deviations or have not been legally approved yet. In their review “Physical methods for the decontamination of meat surfaces” (Albert et al., 2021), Albert and colleagues provide an overview on latest developments regarding alternative non-thermal physical surface treatment technologies. They present applied technologies such as high-pressure processing and irradiation as well as the most promising technological advances for future use such as cold plasma and pulsed light UV-C treatment. All technologies are assessed with regard to their efficiency for reduction of bacterial load, their capacity to preserve food quality, and acceptance by the consumer.

Alternative Curing Methods

Salt has been used in meat preservation for centuries, and curing of meat products is an important cornerstone in assuring product safety. However, consumers are increasingly aware of potential negative health effects of conventionally cured meat products, sparking a growing demand for organic or “naturally cured” meat products with no direct addition of nitrate or nitrite [21]. Alternative curing methods relying on nitrate-reducing starter cultures, plasma treatment, or the addition of vegetable-based ingredients high in nitrate, can result in products exhibiting characteristics that closely resemble conventionally cured meat. Still, the amount of nitrite present in the final product may be difficult to steer and potential negative health effects due to consumption of nitrite remain unchanged [21]. In their review “4” (Siekmann et al., 2021), Siekmann and colleagues provide an overview of the wide range of “natural curing” technologies that have been proposed as a replacement for conventional curing, with a particular focus on addition of plants and their extracts as well as plasma treatment for nitrate generation. They also discuss microbiological implications and the efficacy of the hurdle principle to assure consumer safety.

Meat Safety of Game Meat

There is much less data on the microbial safety of game than for conventionally slaughtered animals, and data collection is less harmonized [22].

Ensuring safe meat from wild game comes with a specific set of challenges. It is inherent in the hunting process that hygiene levels, time to evisceration, and time to cooling do not always adhere to the same strict controls and standards as for animals that are processed in slaughterhouses, leading to an elevated threat of contamination [23, 24] with chemical hazards (e.g., lead from ammunition [25]), as well as parasites, bacteria, or viruses. In their review “Wild game meat—a microbiological safety and hygiene challenge?,” Gomes-Neves et al. focus on bacterial and viral safety of wild game. They review recent publications on the safety of game meat, in particular wild boar, deer and other ruminants, lagomorphs, and prey birds. They identify a large gap between the microbial quality of farmed meat in comparison with game and advise the inclusion of game meat in surveillance and monitoring programs within the EU. It also seems advisable to increase research efforts into the microbial safety of game birds and to monitor AMR in wild animal populations more closely.

Pre-harvest Food Safety on Broiler Farms

In their systematic review, Pessoa et al. summarize current trends in pre-harvest food safety and discuss their effectiveness at either reducing the prevalence of flocks that are positive for a specific pathogen (e.g., biosecurity measures) or reducing the pathogen load in individual animals that came from colonized flocks (e.g., measures to increase host resistance). Most studies focused on Campylobacter and Salmonella as the main hazards. Biosecurity interventions were the most suitable approach to reduce Campylobacter [26, 27], while competitive exclusion or bacteriophages were more successful at managing Salmonella [28].

The authors identify a pronounced lack of new immunization strategies for foodborne pathogens since the successful implementation of the Salmonella vaccination program in broilers starting 2008 in the EU.

Campylobacter spp. in Broiler Meat

Given the high prevalence of Campylobacter in poultry meat, Kittler et al. discuss methods to mitigate Campylobacter along the poultry production chain in more detail in their review “A One Health perspective on a multi-hurdle approach to combat Campylobacter spp. in broiler meat.” Infections with Campylobacter jejuni and coli rank at the top of the most commonly reported foodborne illnesses worldwide, with undercooked poultry and milk as the main source for human infections. Their review gives a risk assessment for the spread of Campylobacter along the food production chain. They emphasize the importance of a hurdle principle and summarize recent findings for strategies ranging from efficient detection methods, access control for personnel and equipment between different flocks, chemical and biological disinfection of feed, water, and facilities, to an update on vaccination programs for broiler flocks. Not surprisingly, defeathering and evisceration are still the key risk factors for contamination of the final product during slaughter. The control of viable but non-culturable (VBNC) cells forming after environmental stress might be leveraged to increase food safety further, even though their significance is discussed controversially.

Conclusion

In order to adequately address emerging and current challenges in food safety, there is a need for multidisciplinary research along the food chain from farm to fork to address emerging food safety risks in a One Health approach. An example of the successful implementation of this approach is the collaboration of experts in animal husbandry, pharmacology, molecular biology, and immunology who addressed the root cause of human infections with Salmonella enterica by developing a vaccine program in poultry, thereby decreasing the overall number of human cases by over 30% in the EU within a few years [29].

Collaboration of experts across different fields in a One Health approach can contribute to the production of economically sound, safe, and healthy food animals. It can help to address challenges like the propagation of antimicrobial-resistant bacteria along the food chain or to prevent food fraud. Interdisciplinary teams are able to design data-driven prevention programs, realistic models of microbial spread, or new analytical methods. They can push research into basic concepts of the interaction of viral, bacterial, and parasitic foodborne pathogens with the environment and host. A fundamental understanding of these processes will ultimately lead to a better understanding of the pathophysiology of foodborne diseases and their resistance against antimicrobials and disinfectants, and may be used to guide better practices in animal and food production, serve regulatory agencies to implement science-based regulations, and contribute to better overall food safety.