Abstract
Materials are often exposed to simultaneous actions of corrosive environment and repeated stress, which sometimes leads to a significant decrease in corrosion fatigue strength. Several attempts have been made in the past to investigate the fatigue cracks initiation and propagation process across different materials. However, the current knowledge is insufficient to address the combined response of corrosion reaction and repeated stress on the fatigue properties of stainless steels (SS) especially when they are subjected to surface treatments. The present paper reviews the relevant past work done to date on the fatigue and corrosion fatigue strengths of nanostructured SS. The corrosion fatigue strengths of SS can be improved by the combined effects of surface treatments and the associated compressive residual stresses. The corrosion fatigue mechanism reviewed in this paper explains in detail the major factors involved in predicting the fatigue life behaviour including residual stress, loading frequency, microstructures, work-hardening, surface topography, surface treatment processing parameters, and fracture surface. For future works, the factors that could improve the corrosion fatigue behaviour of nanostructured SS were also discussed in detail.
Similar content being viewed by others
Data availability
Not applicable.
Code availability
Not applicable.
References
Torres M, Voorwald H (2002) An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel. Int J Fatigue 24:877–886
Olugbade TO, Lu J (2019) Enhanced corrosion properties of nanostructured 316 stainless steel in 0.6 M NaCl solution. J Bio Tribo Corros 5:38
Badreddine J, Rouhaud E, Micoulaut M, Retraint D, Remy S, François M, Viot P, Doubre-Baboeuf G, Saunier DL, Desfontaine V (2011) Simulation and experimental approach for shot velocity evaluation in ultrasonic shot peening. Mécanique Ind 12:223–229
Dang C, Yao Y, Olugbade TO, Li J, Wang L (2018) Effect of multi-interfacial structure on fracture resistance of composite TiSiN/Ag/TiSiN multilayer coating. Thin Solid Films 653:107–112
Dang C, Olugbade TO, Fan S, Zhang H, Gao LL, Li J, Lu Y (2018) Direct quantification of mechanical responses of TiSiN/Ag multilayer coatings through uniaxial compression of micropillars. Vacuum 156:310–316
Nalla R, Altenberger I, Noster U, Liu G, Scholtes B, Ritchie R (2003) On the influence of mechanical surface treatments—deep rolling and laser shock peening—on the fatigue behavior of Ti–6Al–4V at ambient and elevated temperatures. Mater Sci Eng A 355:216–230
De los Rios ER, Walley A, Milan MT, Hammersley G (1995) Fatigue crack initiation and propagation on shot-peened surfaces in A316 stainless steel. Int J Fatigue 17:493–499
Olugbade TO, Lu J (2020) Literature review on the mechanical properties of materials after surface mechanical attrition treatment (SMAT). Nano Mater Sci 2:3–31
Olugbade T, Liu C, Lu J (2019) Enhanced passivation layer by Cr diffusion of 301 stainless steel facilitated by SMAT. Adv Eng Mater 21:1900125
Olugbade TO, Lu J (2019) Characterization of the corrosion of nanostructured 17–4 PH stainless steel by surface mechanical attrition treatment (SMAT). Anal Lett 52:2454–2471
Olugbade T (2019) Datasets on the corrosion behaviour of nanostructured AISI 316 stainless steel treated by SMAT. Data Br 25:104033
Roland T, Retraint D, Lu K, Lu J (2006) Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment. Scr Mater 54:1949–1954
Padilla HA, Boyce BL (2010) A review of fatigue behavior in nanocrystalline metals. Exp Mech 50:5–23
Hanlon T, Tabachnikova ED, Suresh S (2005) Fatigue behavior of nanocrystalline metals and alloys. Fatigue Damage Struct Mater 27:1147–1158
Gujba KA, Medraj M (2014) Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening. Dent Mater 7:7925–7974
Dalaei K, Karlsson B, Svensson LE (2011) Stability of shot peening induced residual stresses and their influence on fatigue lifetime. Mater Sci Eng A 528:1008–1015
Kim JC, Cheong SK, Noguchi H (2013) Residual stress relaxation and low- and high-cycle fatigue behavior of shot-peened medium-carbon steel. Int J Fatigue 56:114–122
John R, Buchanan DJ, Caton MJ, Jha SK (2010) Stability of shot peen residual stresses in IN100 subjected to creep and fatigue loading. Int J Fatigue 2:1887–1893
Shaw LL, Tian J, Ortiz AL, Dai K, Villegas JC, Liaw PK, Ren R, Klarstrom DL (2010) A direct comparison in the fatigue resistance enhanced by surface severe plastic deformation and shot peening in a C-2000 superalloy. Mater Sci Eng A 527:986–994
Dalaei K, Karlsson B (2012) Influence of shot peening on fatigue durability of normalized steel subjected to variable amplitude loading. Int J Fatigue 38:75–83
Pandey V, Rao GS, Chattopadhyay K, Santhi Srinivas NC, Singh V (2015) Effect of surface nanostructuring on LCF behavior of aluminum alloy 2014. Mater Sci Eng A 647:201–211
Pandey V, Chattopadhyay K, Santhi Srinivas NC, Singh V (2017) Role of ultrasonic shot peening on low cycle fatigue behavior of 7075 aluminium alloy. Int J Fatigue 103:426–435
Kumar S, Chattopadhyay K, Singh V (2017) Effect of ultrasonic shot peening on LCF behavior of the Ti–6Al–4V alloy. J Alloys Compd 724:187–197
Chen G, Gao J, Cui Y, Gao H, Guo X, Wu S (2018) Effects of strain rate on the low cycle fatigue behavior of AZ31B magnesium alloy processed by SMAT. J Alloys Compd 735:536–546
Li D, Chen HN, Xu H (2009) The effect of nanostructured surface layer on the fatigue behaviors of a carbon steel. Appl Surf Sci 255:3811–3816
Villegas JC, Shaw LL, Dai K, Yuan W, Tian J, Liaw PK, Klarstrom DL (2005) Enhanced fatigue resistance of a nickel-based hastelloy induced by a surface nanocrystallization and hardening process. Philos Mag Lett 85:427–438
Pham MS, Holdsworth SR, Janssens KGF, Mazza E (2013) Cyclic deformation response of AISI 316L at room temperature: mechanical behaviour, microstructural evolution, physically-based evolutionary constitutive modelling. Int J Plast 47:143–164
Unal O, Varol R (2015) Surface severe plastic deformation of AISI 304 via conventional shot peening, severe shot peening and repeening. Appl Surf Sci 351:289–295
Zhou J, Sun Z, Kanouté P, Retraint D (2018) Experimental analysis and constitutive modelling of cyclic behaviour of 316L steels including hardening/softening and strain range memory effect in LCF regime. Int J Plast 107:54–78
Bagherifard S, Guagliano M (2012) Fatigue behavior of a low-alloy steel with nanostructured surface obtained by severe shot peening. Eng Fract Mech 81:56–68
Zhang K, Wang ZB, Lu K (2017) Enhanced fatigue property by suppressing surface cracking in a gradient nanostructured bearing steel. Mater Res Lett 5:258–266
Abioye TE, Omotehinse IS, Oladele IO, Olugbade TO, Ogedengbe TI (2020) Effects of post-weld heat treatments on the microstructure, mechanical and corrosion properties of gas metal arc welded 304 stainless steel. World J Eng 17(1):87–96
Olugbade TO (2020) Electrochemical characterization of the corrosion of mild steel in saline following mechanical deformation. Anal Lett 54(2021):1055–1067
Arifvianto B, Suyitno M, Mahardika M (2012) Effects of surface mechanical attrition treatment (SMAT) on a rough surface of AISI 316L stainless steel. Appl Surf Sci 258:4538–4543
Ortiz AL, Tian JW, Shaw LL, Liaw PK (2010) Experimental study of the microstructure and stress state of shot peened and surface mechanical attrition treated nickel alloys. Scr Mater 62:129–132
Zu H, Chau K, Olugbade TO, Pan L, Chow DH, Huang L, Zheng L, Tong W, Li X, Chen Z, He X, Zhang R, Mi J, Li Y, Dai B, Wang J, Xu J, Liu K, Lu J, Qin L (2020) Comparison of modified injection molding and conventional machining in biodegradable behavior of perforated cannulated magnesium hip stents. J Mater Sci Technol 63(2021):145–160
Abioye TE, Olugbade TO, Ogedengbe TI (2017) Welding of dissimilar metals using gas metal arc and laser welding techniques: a review. J Emerg Trends Eng Appl Sci 8(6):225–228
Zhoua J, Retrainta D, Suna Z, Kanoutéa P (2018) Comparative study of the effects of surface mechanical attrition treatment and conventional shot peening on low cycle fatigue of a 316L stainless steel. Surf Coat Technol 349:556–566
Hanlon T, Kwon YN, Suresh S (2003) Grain size effects on the fatigue response of nanocrystalline metals. Scr Mater 49:675–680
Yang L, Tao NR, Lu K, Lu L (2013) Enhanced fatigue resistance of Cu with a gradient nanograined surface layer. Scr Mater 68:801–804
Li Y, Zhou L, He W, He G, Wang X, Nie X et al (2013) The strengthening mechanism of a nickel-based alloy after laser shock processing at high temperatures. Sci Technol Adv Mater 14:055010
Yasuoka M, Wang P, Zhang K, Qiu Z, Kusaka K, Pyoun Y et al (2013) Improvement of the fatigue strength of SUS304 austenite stainless steel using ultrasonic nanocrystal surface modification. Surf Coat Technol 218:93–98
Uusitalo J, Karjalainen LP, Retraint D, Palosaari M (2009) Fatigue properties of steels with ultrasonic attrition treated surface layers. Mater Sci Forum 604–605:239–248
Xingchen Y, Shuo Y, Chaoyue C, Richard J, Rocco L, Rodolphe B, Wenyou M, Min K, Hanlin L, Jian L, Min L (2019) Fatigue strength improvement of selective laser melted Ti6Al4V using ultrasonic surface mechanical attrition. Mater Res Lett 7(8):327–333
Wei YJ, Anand L (2004) Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals. J Mech Phys Solids 52:2587–2616
Wei YJ, Bower AF, Gao HJ (2008) Enhanced strain-rate sensitivity in fcc nanocrystals due to grain-boundary diffusion and sliding. Acta Mater 56:1741–1752
Meyers MA, Mishra A, Benson DJ (2006) Mechanical properties of nanocrystalline materials. Prog Mater Sci 51:427–556
Tian JW, Villegas JC, Yuan W, Fielden D, Shaw L, Liaw PK, Klarstrom DL (2007) A study of the effect of nanostructured surface layers on the fatigue behaviors of a C-2000 superalloy. Mater Sci Eng A 468–470:164–170
Dai K, Shaw L (2008) Analysis of fatigue resistance improvements via surface severe plastic deformation. Int J Fatigue 30:1398–1408
Kumar SA, Raman SS, Sankara Narayanan TSN (2012) Effect of surface mechanical attrition treatment on fatigue lives of alloy 718. Trans Indian Inst Metals 65:473–477
Olugbade T, Lu J (2018) Effects of materials modification on the mechanical and corrosion properties of AISI 316 stainless steel. In: Twelfth international conference on fatigue damage of structural materials, Cape Cod, Hyannis, USA
Olugbade T, Lu J (2020) Improving the passivity and corrosion behaviour of mechanically surface-treated 301 stainless steel. In: International conference on nanostructured materials (NANO 2020), vol 117, Australia
Blonde R, Chan HM, Bonasso NA, Bolle B, Grosdidier T, Lu J (2010) Evolution of texture and microstructure in pulsed electrodeposited Cu treated by surface mechanical attrition treatment. J Alloys Compd 504:S410–S413
Zhang XC, Lu J, Shi SQ (2011) A computational study of plastic deformation in AISI 304 induced by surface mechanical attrition treatment. Mech Adv Mater Struct 18:572–577
Murakami Y, Nomoto T, Ueda T (2001) Factors influencing the mechanism of superlong fatigue failure in steels. Fatigue Fract Engng Mater Struct 22:581–590
Huang HW, Wang ZB, Lu J, Lu K (2015) Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer. Acta Mater 87:150–160
Ueno H, Kakihata K, Kaneko Y, Hashimoto S, Vinogradov A (2011) Enhanced fatigue properties of nanostructured austenitic SUS 316L stainless steel. Acta Mater 59:7060
Huang JY, Yeh JJ, Jeng SL, Chen CY, Kuo RC (2006) High-cycle fatigue behavior of type 316L stainless steel. Mater Trans 47:409
Strizak JP, Tian H, Liaw PK, Mansur LK (2005) Fatigue properties of type 316LN stainless steel in air and mercury. J Nucl Mater 343:134
Tian H, Liaw PK, Fielden DE, Brooks CR, Brotherton MD, Jiang L, Yang B, Wang H, Strizak JP, Mansur LK (2006) Effects of frequency on fatigue behavior of type 316 low-carbon, nitrogen-added stainless steel in air and mercury for the spallation neutron source. Metall Mater Trans A 37(1):163–173
Ayyub P et al (2001) Synthesis of nanocrystalline material by sputtering and laser ablation at low temperatures. Appl Phys A 73:67–73
Wang YM, Jankowski AF, Hamza AV (2007) Strength and thermal stability of nanocrystalline gold alloys. Scr Mater 57:301–304
Jankowski AF et al (2006) Nanocrystalline growth and grainsize effects in Au–Cu electrodeposits. Thin Solid Films 494:268–273
Agnew SR et al (2000) Microstructure and mechanical behavior of nanocrystalline metals. Mater Sci Eng A A285:391–396
Fan GJ et al (2007) Mechanical behavior of a bulk nanocrystalline Ni–Fe alloy. J Alloy Compd 434(435):298–300
Khan AS et al (2006) Nanocrystalline aluminum and iron: mechanical behavior at quasi-static and high strain rates, and constitutive modeling. Int J Plast 22:195–209
Ajdelsztajn L et al (2005) Cold spray deposition of nanocrystalline aluminum alloys. Metall Mater Trans A 36A:657–666
Xiao C et al (2001) Tensile behavior and fracture in nickel and carbon doped nanocrystalline nickel. Mater Sci Eng A A301:35–43
Chokshi AH et al (1989) On the validity of the Hall-Petch relationship in nanocrystalline metals. Scri Metall 23:1679–1683
Wang YM et al (2003) Microsample tensile testing of nanocrystalline copper. Scri Mater 48:1581–1586
Yang Y et al (2008) Fatigue and fracture of a bulk nanocrystalline NiFe alloy. Metall Mater Trans A 39A:1145–1156
Nikitin I (2005) Mechanical and thermal stability of mechanically induced near-surface nanostructures. Mater Sci Eng Abstr (Structural Materials: Properties, Microstructure and Processing) 403:318–327
Han SZ et al (2007) Fatigue behavior of nano-grained copper prepared by ECAP. J Alloy Compd 434–435:304–306
Burkle G et al (2002) Determination of the mechanical properties of nanocrystalline Fe-Cr-based thermal spray coatings. Mater Sci Forum 386(388):571–576
Cavaliere P (2007) Low cycle fatigue of electrodeposited pure nanocrystalline metals. Mater Sci Forum 2:302
Moser B et al (2006) Cyclic strain hardening of nanocrystalline nickel. Scr Mater 54:1151–1155
Mano H et al (2005) Characterization of nanocrystalline surface layer induced by shot peening and effect on their fatigue strength. In: Materials research society symposium proceedings, November 30–December 2, 2004, Boston, MA, vol 843, pp 67–72
Pao PS, Jones HN, Feng CR (2004) Fatigue crack growth and fracture toughness in bimodal Al 5083. In: Materials research society symposium proceedings, December 1–5, 2003, Boston, MA, vol 791, pp 17–22
Olugbade TO (2020) Stress corrosion cracking and precipitation strengthening mechanism in TWIP steels: progress and prospects. Corros Rev 38:473–488
Sriraman KR, Raman SGS, Seshadri SK (2007) Influence of crystallite size on the hardness and fatigue life of steel samples coated with electrodeposited nanocrystalline Ni–W alloys. Mater Lett 61:715–718
Witney AB et al (1995) Fatigue of nanocrystalline copper. Scr Metall Et Mater 33:2025–2030
Xie JJ, Wu XL, Hong YS (2008) Study on fatigue crack nucleation of electro deposited nanocrystalline nickel. Adv Mater Res 33–37:925–930
Abraham M et al (2001) Microstructure and thermal stability of electrodeposited nanocrystalline nickel. In: International symposium on metastable, mechanically alloyed and nanocrystalline materials, Jun 24–29, 2001, Ann Arbor, MI, pp 397–402
Arnould O, Hubert O, Hild F (2004) Thermomechanical properties and fatigue of nanocrystalline Ni/Cu electrodeposits. Nanoscale Materials and Modeling—Relations Among Processing, Microstructure and Mechanical Properties, April 13–16, 2004, San Francisco, CA, pp 357–362
Cheng S et al (2007) Fracture of Ni with grain-size from nanocrystalline to ultrafine scale under cyclic loading. Scr Mater 57:217–220
Olugbade TO, Abioye TE, Farayibi PK, Olaiya NG, Omiyale BO, Ogedengbe TI (2020) Electrochemical properties of MgZnCa-based thin film metallic glasses fabricated via magnetron sputtering deposition coated on a stainless steel substrate. Anal Lett 54(10):1588–1602
Hattar K et al (2008) Defect structures created during abnormal grain growth in pulsed-laser deposited nickel. Acta Mater 56:794–801
Hugo RC et al (2003) In-situ TEM tensile testing of DC magnetron sputtered and pulsed laser deposited Ni thin films. Acta Mater 51:1937–1943
Jianhong H, Schoenung JM (2003) Nanocrystalline Ni coatings strengthened with ultrafine particles. Metall Mater Trans A 34A:673–683
Mohammed T, Olugbade TO, Nwankwo I (2016) Determination of the effect of oil exploration on galvanized steel in Niger Delta, Nigeria. J Sci Res Rep 10(2016):1–9
Knapp JA, Follstaedt DM (2004) Hall-Petch relationship in pulsed-laser deposited nickel films. J Mater Res 19:218–227
Kumar KS et al (2003) Deformation of electrodeposited nanocrystalline nickel. Acta Mater 51:387–405
Larsen KP et al (2003) MEMS device for bending test: measurements of fatigue and creep of electroplated nickel. Sens Actuators A 103:156–164
Li HQ, Ebrahimi F (2003) An investigation of thermal stability and microhardness of electrodeposited nanocrystalline nickel-21% iron alloys. Acta Mater 51:3905–3913
Wu X et al (2006) Twinning and stacking fault formation during tensile deformation of nanocrystalline Ni. Scr Mater 54:1685–1690
Xie J, Wu X, Hong Y (2007) Shear bands at the fatigue crack tip of nanocrystalline nickel. Scr Mater 57:5–8
Yang Y et al (2007) Mechanisms of fatigue in LIGA Ni MEMS thin films. Mater Sci Eng A 444:39–50
Watts OP (1916) Rapid nickel plating [with discussion]. Trans Am Electrochem Soc 29:395–403
Cui BZ et al (2007) Highly textured and twinned Cu films fabricated by pulsed electrodeposition. Acta Mater 55:4429–4438
Mughrabi H, Hoppel HW, Kautz M (2004) Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation. Scr Mater 51:807–812
Hoppel HW et al (2006) An overview: fatigue behaviour of ultrafine-grained metals and alloys. Int J Fatigue 28:1001–1010
Canadinc D et al (2008) On the cyclic stability of nanocrystalline copper obtained by powder consolidation at room temperature. Scr Mater 58:307–310
Horita Z, Langdon TG (2005) Microstructures and microhardness of an aluminum alloy and pure copper after processing by high pressure torsion. Mater Sci Eng A 410–411:422–425
Ivanisenko Y, Valiev RZ, Fecht HJ (2005) Grain boundary statistics in nano-structured iron produced by high pressure torsion. Mater Sci Eng A 390:159–165
Pérez-Prado MT et al (2008) Bulk nanocrystalline [omega]-Zr by high-pressure torsion. Scr Mater 58:219–222
Yang Z, Welzel U (2005) Microstructure-microhardness relation of nanostructured Ni produced by high-pressure torsion. Mater Lett 59:3406–3409
Lee Z et al (2004) Microstructure and microhardness of cryomilled bulk nanocrystalline Al-7.5%Mg alloy consolidated by high pressure torsion. Scr Mater 51:209–214
Stolyarov VV et al (2000) Processing nanocrystalline Ti and its nanocomposites from micrometer-sized Ti powder using high pressure torsion. Mater Sci Eng A 282:78–85
Valiev RZ et al (1996) Processing of nanostructured nickel by severe plastic deformation consolidation of ball-milled powder. Scr Mater 34:1443–1448
Liao XZ et al (2006) High-pressure torsion-induced grain growth in electrodeposited nanocrystalline Ni. Appl Phys Lett 88:021909
Mano H, Kondo S, Matsumuro A (2006) Microstructured surface layer induced by shot peening and its effect on fatigue strength. J Jpn Inst Metals 70:415–419
Martin U et al (1998) Cyclic deformation and near surface microstructures of normalized shot peened steel SAE 1045. Mater Sci Eng A 246:69–80
Bonelli M et al (2003) Pulsed laser deposition of diamond like carbon films on polycarbonate. J Appl Phys 93:859–865
Palkar VR, Prashanthi K, Dattagupta SP (2008) Influence of process-induced stress on multiferroic properties of pulse laser deposited Bi0.7Dy0.3FeO3 thin films. J Phys D 41:45
Luzin V, Valarezo A, Sampath S (2007) Through-thickness residual stress measurement in metal and ceramic spray coatings by neutron diffraction. In: MECASENS 4th international conference on stress evaluation using neutrons and synchrotron radiation, Sep 24–26, Vienna, AUSTRIA, pp 315–320
Choi WB et al (2007) Integrated characterization of cold sprayed aluminum coatings. Acta Mater 55:857–866
Jiang HG et al (2000) Microstructural evolution, microhardness and thermal stability of HPT-processed Cu. Mater Sci Eng A 290:128–138
Shaik G, Milligan W (1997) Consolidation of nanostructured metal powders by rapid forging: processing, modeling, and subsequent mechanical behavior. Metall Mater Trans A 28:895–904
Zhang YS et al (2006) Friction and wear behaviors of nanocrystalline surface layer of pure copper. Wear 260:942–948
El-Sherik AM, Shirokoff J, Erb U (2005) Stress measurements in nanocrystalline Ni electrodeposits. J Alloy Compd 389:140–143
Li S-X, Akid R (2013) Corrosion fatigue life prediction of a steel shaft material in seawater. Eng Fail Anal 34:324–334
Ebara R, Yamaguchi Y, Kanei D, Ota T, Miyoshi Y (2011) Ultrasonic corrosion fatigue behavior of austenitic stainless steels. In: Proceedings of the 5th international conference on VHCF, Berlin, Germany, pp 275–280
Ebara R, Yamaguchi Y, Kanei D, Yamamoto Y (2012) Ultrasonic corrosion fatigue behavior of high strength austenitic stainless steels. In: Proceedings of a symposium sponsored by mechanical behavior of committee of TMS and ASM international, Pittsburgh, U.S.A, pp 233–242
Ebara R 2015 Giga-cycle corrosion fatigue strength of austenitic stainless steels, Anales de Mecánica de la Fractura vol 32, pp 37-42
Ebara R, Miyoshi Y (2014) Ultrasonic corrosion fatigue behavior of duplex stainless steel. Key Eng Mater 577–578:421–424
Ebara R, Kai T, Inoue K (1978) Corrosion fatigue behavior of 13Cr stainless steel in sodium-chloride aqueous solution and steam environment, ASTM STP642. In: Craig Jr HL, Crooker TW, Hoeppner DW (eds) ASTM, pp 155–168
Ebara R, Furukawa H, Goto A (1981) Corrosion fatigue behavior of duplex stainless steel. In: Proc. of the Annual Meeting of the Japanese Soc. for Strength and Fracture of Materials pp 54–57
Ebara R (2016) The influence of metallurgical factors on corrosion fatigue strength of stainless steels. In: 21st European conference on fracture, ECF21, 20–24 June 2016, Catania, Italy, Procedia Structural Integrity Procedia, vol 2, pp 517–524
Perkins KM, Bache MR (2005) Corrosion fatigue of a 12%Cr low pressure turbine blade steel in simulated service environments. Int J Fatigue 27(10–12):1499–1508
Shipilov SA (2002) Mechanisms for corrosion fatigue crack propagation. Fatigue Fract Eng Mater Struct 25:243–259
Jakubowski M (1998) Fatigue crack propagation in austenitic stainless steel under low frequency loading and salt water conditions. Fatigue Fract Eng Mater Struct 21:937–946
Ebara R, Kai T, Mihara M, Kino H, Katayama K, Shiota K (1983) Corrosion fatigue behaviour of 13Cr stainless steel for turbine moving blades. In: Jafee RI (ed) Corrosion fatigue of steam turbine blade materials, vol 4. Pergamon Press, New York, pp 150–167
Austen IM, McIntyre P (1979) Corrosion fatigue of high strength steel in low pressure hydrogen gas. Met Sci 13:420–428
Ebara R, Kai T, Inoue K, Masumoto I (1978) Fractographic analysis of corrosion fatigue cracking of 13Cr stainless steel in NaCl aqueous solution. J Soc Mat Sci 27:64–68
Ebara R (2006) Corrosion fatigue phenomena learned from failure analysis. Eng Fail Anal 13:516–525
Ebara R, Yamada T, Kawano H (1990) Corrosion fatigue process of 12 Cr stainless steel. ISIJ Int 30:535–539
Ebara R, Furukawa H, Goto A (1981) Corrosion fatigue behaviour of duplex stainless steels. In: Proc. of the annual meeting, JSFSS, pp 54–7
Ebara R, Matsumoto K, Matsuda Y, Mizuno Y, Nishimura I (2010) Fatigue of materials, advances and emergences in understanding. In: Srivastsan TS, AshrafTmam M (eds) TMS. Wiley, pp 381–392
Ebara R (2006) The present situation and future problems in ultrasonic fatigue testing–mainly reviewed on environmental effects and materials’ screening. Int J Fatigue 28:1465–1470
Endo K, Miyao Y (1958) Effects of cycle frequency on the corrosion fatigue strength. Bull Jpn Soc Mech Eng 1:374–380
Scamans GM, Birbilis R, Buchheit RG (2010) Corrosion of aluminum and its alloys. Shreir’s Corros 3:1974–2010
Yu-Ting T, Po-Chiang L, Yu-Wen C, Shing-Hoa W, Jer-Ren Y (2018) Fatigue behavior and microstructural characteristics of a duplex stainless steel weld metal under vibration-assisted welding. Mater Sci Eng A 721:319–327
Donahue JR, Burns JT (2016) Effect of chloride concentration on the corrosion–fatigue crack behavior of an age-hardenable martensitic stainless steel. Int J Fatigue 91:79–99
Szklarz KE (2000) Aggressive CO2 corrosion and fatigue behaviour of pipeline girth welds, Paper No. 00012, Proc. Corrosion 2000, NACE International, Houston, TZ
Eadie RL et al (2000) Corrosion fatigue and near-neutral pH stress corrosion cracking of pipeline steel in very dilute carbonate/bicarbonate with and without the presence of hydrogen sulphide using the compliance technique, Paper No. 03527, Proc. Corrosion 2003, NACE International, Houston, TZ.
Masayuki A, Yoshihiko U, Toshifumi K, Masaki N, Toshihiro T, Yu B, Kenta I (2015) Effect of sensitization on corrosion fatigue behavior of type 304 stainless steel annealed in nitrogen gas. Mater Sci Eng A 640:33–41
Lou X, Othon MA, Rebak RB (2017) Corrosion fatigue crack growth of laser additively-manufactued 316L stainless steel in high temperature water. Corros Sci 127:120–130
Akid R (1997) The role of stress-assisted localised corrosion in the development of short fatigue cracks. In: Van Der Sluys WA, Piascik RS, Zawierucha R (eds) Effects of the environment on the initiation of crack growth, ASTM STP 1298. American Society of Testing and Materials, West Conshohocken, pp 3–17
Frankel GS (1998) Pitting corrosion of metals: a review of the critical factors. J Electrochem Soc 145(6):2186–2198
Ritchie RO, Lankford J (1986) Small fatigue cracks: cracks: a statement of the problem and potential solutions. Mater Sci Eng 84:11–16
Lukaszewicz M, Zhou S, Turnbull A (2015) Novel concepts on the growth of corrosion fatigue small and short cracks. Mater Corros 66(12):1488–1490
Zhou S, Lukaszewicz M, Turnbull A (2015) Small and short crack growth and the solution-conductivity dependent electrochemical crack size effect. Corros Sci 97:25–37
Ganglof RP (1981) Criticality of crack size in aqueous corrosion fatigue. Res Mech Lett 1(7):299–306
Uhlig HH (1950) Adsorbed and reaction-product films on metals. J Electrochem Soc 97(11):215C
YaM K (1961) Effects of anions on the dissolution kinetics of metals. J Electrochem Soc 108(3):209–216
Leckie HP, Uhlig HH (1966) Environmental factors affecting the critical potential for pitting in 18–8 stainless steel. J Electrochem Soc 113(12):1262–1267
Hoar TP, Jacob WR (1967) Breakdown of passivity of stainless steel by halide ions. Nature 216(5122):1299–1301
Hoar TP (1967) The production and breakdown of the passivity of metals. Corr Sci 7(6):341–355
Boehni H, Uhlig HH (1969) Environmental factors affecting the critical pitting potential of aluminium. Electrochem Soc J 116(7):906–910
Szklarska-Smialowska Z (1986) Pitting corrosion of metals. Houston (TX): NACE
Vlčková I, Jonšta P, Jonšta Z, Váňová P, Kulová T (2016) Corrosion fatigue of austenitic stainless steels for nuclear power engineering. Metals 6:319
Boukerrou A, Cottis RA (1993) Crack initiation in the corrosion fatigue of structural steels in salt solutions. Corr Sci 3–5(14):577–585
Wang Y, Akid R (1996) Role of nonmetallic inclusions in fatigue, pitting, and corrosion fatigue. Corrosion (Houston) 52(2):92–102
Hoeppner DW (1972) Corrosion fatigue considerations in materials selections and engineering design. Corrosion Fatigue: Chemistry, Mechanics, and Microstructure, NACE pp 3–11
McAdam DJ, Gell GW (1928) Pitting and its effect on the fatigue limit of steels corroded under various conditions. J Proc Am Soc Test Mater 41:696–732
Magnin T, Coudreuse L (1985) The effects of strain rate on the corrosion fatigue behaviour of b.c.c. fe26cr1mostainless steels. Mater Sci Eng 72(2):125–134
Wu XD (1995) Short fatigue crack behaviour of a submarine hull steel in inert and aggressive environments. University of Sheffield, PhD Dissertation
Linder J, Blom R (2001) Development of a method for corrosion fatigue life prediction of structurally loaded bearing steels. Corrosion 57(5):404–412
Stashchuk MH (2000) Analysis of the influence of elastic deformation on the electrode potential of a metal cylinder in a medium. Mater Sci 36(1):54–59
Turnbull A (2003) 6.04—Environment-assisted fatigue in liquid environments. In: Milne I, Ritchie RO, Karihaloo B (eds) Comprehensive structural integrity. Pergamon, Oxford, pp 163–210
Magnin T, Lardon JM (1985) The influence of a 3.5% Nacl solution on the fatigue damage evolution in a planar slip f.c.c. stainless steel. Mater Sci Eng 76:L7–L10
Sahal M, Creus J, Sabot R et al (2006) The effects of dislocation patterns on the dissolution process of polycrystalline nickel. Acta Mater 54(8):2157–2167
Sahal M, Creus J, Sabot R et al (2004) Consequences of plastic strain on the dissolution process of polycrystalline nickel in H2SO4 solution. Scr Mater 51(9):869–873
Liang J, Suo Z (2001) Stress-assisted reaction at a solid-fluid interface. Interface Sci 9(1–2):93–104
Hu H (1997) Fatigue and corrosion fatigue crack growth resistance of RQT501. University of Sheffield, PhD Dissertation
Akid R, Miller KJ (1991) Short fatigue crack growth behaviour of a low carbon steel under corrosion fatigue conditions. Fatigue Fract Eng Mater Struct 14(6):637–649
Turnbull A, Wright L, Crocker L (2010) New insight into the pit-to-crack transition from finite element analysis of the stress and strain distribution around a corrosion pit. Corros Sci 52(4):1492–1498
Thompson AW, Backofen WA (1971) The effect of grain size on fatigue. Acta Metall 19(7):597–606
Pearson S (1975) Fatigue crack closure under cyclic tension. Eng Fract Mech 7:235–247
Miller KJ (1993) The two thresholds of fatigue behaviour. Fatigue Fract Eng Mater Struct 16(9):931–939
Suresh S, Ritchie RO (1984) Propagation of short fatigue cracks. Int Mater Rev 29(6):445–476
Ritchie RO, Lankford J (1986) Small fatigue cracks. The Metallurgical Society of AIME, Warrendale (PA)
Tanaka K, Nakai Y, Kawashima R (1983) Fracture mechanics approach to fatigue crack initiation from deep notches. Eng Fract Mech 18(5):1011–1023
Brown CW, King JE, Hicks MA (1984) Effects of microstructure on long and short cracks at a sharp notch. Met Sci 18:374–380
Lankford J (1982) The growth of a small fatigue cracks in 7076–T6 aluminium. Eng Fract Mech 5:232–248
Taira S, Tanaka K, Nakai Y (1978) A model of crack-tip slip band blocked by grain boundary. Mech Res Commun 5:375–381
Funding
Not applicable.
Author information
Authors and Affiliations
Contributions
All authors contributed equally to this work.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Consent to participate
Not applicable.
Consent for publication
Not applicable.
Ethical approval
Not applicable.
Additional information
Technical Editor: Monica Carvalho.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Olugbade, T.O., Ojo, O.T., Omiyale, B.O. et al. A review on the corrosion fatigue strength of surface-modified stainless steels. J Braz. Soc. Mech. Sci. Eng. 43, 421 (2021). https://doi.org/10.1007/s40430-021-03148-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40430-021-03148-5