Abstract
Considering input shaft and output shaft excitation, the time-varying meshing stiffness, static transmission error and gear backlash, a nonlinear dynamic model of the twisting vibration of the orthogonal curve-face gear transmission was established, and the nonlinear vibration differential equation was listed. Using the forth-order Runge–Kutta numerical integral method to solve the equation with MATLAB, the dynamic response of orthogonal curve-face gear transmission was obtained. By analyzing the response images, the impact of different meshing frequency was summarized. Different meshing frequencies lead to different dynamic responses, including single-cycle response, 9-cycle response, quasi-periodic and chaotic response. When the gear backlash changes, the vibration amplitude of the system also changes.
Similar content being viewed by others
References
Gong H (2012) Transmission design and characteristic analysis of orthogonal curve-face gear drive. Chongqing University
Li F (1975) Non-circular gear. China Machine Press, pp 90–95
Litvin FL, Zhang Y, Wang JC et al (1992) Design and geometry of face-gear drives. J Mech Des 114:642
Litvin FL, Fuentes A, Zanzi C et al (2002) Design, generation, and stress analysis of two versions of geometry of face-gear drives. Mech Mach Theory 37:1179–1211
Litvin FL, Fuentes A, Zanzi C et al (2002) Face-gear drive with spur involute pinion: geometry generation by a worm stress analysis. Comput Methods Appl Mech Eng 191:2785–2813
Shen Y, Yang S, Liu X (2006) Nonlinear dynamics of a spur gear pair with time-varying stiffness and backlash based on incremental harmonic balance method. Int J Mech Sci 48:1256–1263
Litak G, Friswell MI (2005) Dynamics of a gear system with faults in meshing stiffness. Nonlinear Dyn 41:415–421
Li X, Zhu R, Li Z, Jin G (2013) Analysis of coupled vibration of face gear drive with non-orthogonal intersection. J Cent South Univ (Science and Technology) 06:2274–2280
Song S (2007) Analysis and modeling of nonlinear dynamics of gear-pair. Jilin University
Lin TJ, Ran XT (2012) Nonlinear vibration characteristic analysis of a face-gear drive. J Vib Shock 02:25–31
Lin C, Li S, Gong H (2014) Design and 3D modeling of orthogonal variable transmission ratio face gear. J Hunan Univ (Natural Science) 03:49–55
Kim TC, Rook TE, Singh R (2005) Super-and sub-harmonic response calculations for a torsional system with clearance nonlinearity using the harmonic balance method. J Sound Vibrations 281:965–993. doi:10.1016/j.jsv.2004.02.039
Japan Society of Mechanical Engineering (1984) Gear strength design information. China Machine Press, pp 28–35
Acknowledgments
The authors appreciate their supports from the National Natural Science Foundation of China (51275537).
Author information
Authors and Affiliations
Corresponding author
Additional information
Technical Editor: Fernando Alves Rochinha.
Rights and permissions
About this article
Cite this article
Lin, C., Liu, Y. & Gu, S. Analysis of nonlinear twisting vibration characteristics of orthogonal curve-face gear drive. J Braz. Soc. Mech. Sci. Eng. 37, 1499–1505 (2015). https://doi.org/10.1007/s40430-014-0296-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40430-014-0296-y