Abstract
AZ31/Mg3Y composites with a layer thickness of 100–200 μm were fabricated by accumulated rolling bonding (ARB), which was followed by diffusion annealing at 300 °C for 0–32 h. An interface layer, containing numerous Al-Y precipitates, is formed in the Mg3Y layer that is adjacent to the interface as a result of Al diffusing from the AZ31 layers into the Mg3Y layers. The thickness of the interface layer gets increased and more precipitates are formed in the interface layer with the extension of the annealing time. The microhardness of the AZ31 and Mg3Y layer decreases firstly and then reaches a stable value, while the microhardness of the interface layer increases gradually with the extension of the annealing time. The AZ31/Mg3Y composites exhibit equivalent strength but increased ductility after diffusion annealing, in comparison to the as-rolled AZ31/Mg3Y composite. In addition, the AZ31/Mg3Y composites after annealing always present higher strength and ductility than AZ31/AZ31 composite, which was fabricated by the same process as that for the AZ31/Mg3Y composites. Hetero-deformation induced strengthening also plays an important role in the excellent strength and ductility of the annealed AZ31/Mg3Y composite. This study can provide a direction for improving the plasticity and strength of magnesium alloys synergistically.
Similar content being viewed by others
References
X. Dong, L. Feng, S. Wang, G. Ji, A. Addad, H. Yang, E.A. Nyberg, S. Ji, Acta Mater. 232, 11957 (2022)
S.J. Meng, H. Yu, S.D. Fan, Q.Z. Li, S.H. Park, J.S. Suh, Y.M. Kim, X.L. Nan, M.Z. Bian, F.X. Yin, W.M. Zhao, B.S. You, K.S. Shin, Acta Metall. Sin. -Engl. Lett. 32, 148 (2019)
A. Rouzbeh, R. Hashemi, M. Sedighi, J. Alloys Compd. 942, 169059 (2023)
Y.P. Liang, S.H. Liu, K. Xu, Y. Du, Acta Metall. Sin. -Engl. Lett. 32, 426 (2018)
Y. Zhu, F. Liu, R. Xin, B. Song, Q. Liu, Mater. Sci. Eng. A 779, 139156 (2020)
C.Y. Zhao, X.H. Chen, P. Peng, T. Tu, A. Atrens, F.S. Pan, Acta Metall. Sin. -Engl. Lett. 33, 1217 (2020)
J. Zhong, J. Ji, M. He, F. Bian, J. Qiao, Mater. Sci. Eng. A 772, 138715 (2020)
P. Cao, M. Zhang, W. Han, Y. Yan, L. Chen, Acta Metall. Sin. -Engl. Lett. 25, 265 (2012)
H.S. David, Qian. Ma, A.E. Mark, Peng. Cao, Z. Hildebrand, Metall. Mater. Trans. A 36, 1669 (2005).
J. Zheng, Z. Yan, J. Ji, Y. Shi, H. Zhang, Z. Zhang, Y. Xue, J. Magnes. Alloys. 10, 1124 (2022)
K.N. Zhao, H.X. Li, J.R. Luo, Y.J. Liu, Q. Du, J.S. Zhang, J. Alloys Compd. 729, 344 (2017)
W. Chen, W. He, Z. Chen, B. Jiang, Q. Liu, Int. J. Plast. 133, 102806 (2020)
Y. Meng, H. Zhang, B. Lin, L. Wang, J. Fan, L. Lu, X. Zhou, H. Huang, S. Zhang, H.J. Roven, Mater. Sci. Eng. A 833, 142578 (2022)
Q. Wang, Y. Shen, B. Jiang, A. Tang, J. Song, Z. Jiang, T. Yang, G. Huang, F. Pan, Mater. Sci. Eng. A 731, 184 (2018)
S. Liu, W. Wang, X. Chen, G. Huang, H. Liu, A. Tang, B. Jiang, F. Pan, Mater. Sci. Eng. A 812, 141094 (2021)
C.X. Huang, Y.F. Wang, X.L. Ma, S. Yin, H.W. Höppel, M. Göken, X.L. Wu, H.J. Gao, Y.T. Zhu, Mater. Today 21, 713 (2018)
K.N. Zhao, J.C. Liu, X.Y. Nie, Y. Li, H.X. Li, Q. Du, L.Z. Zhuang, J.S. Zhang, Mater. Des. 91, 122 (2016)
S. Liu, D. Xia, H. Yang, G. Huang, F. Yang, X. Chen, A. Tang, B. Jiang, F. Pan, Int. J. Plast. 157, 103371 (2022)
M. Acarer, B. Demir, B. Dikici, E. Salur, J. Magnes. Alloys 10, 1086 (2022)
Y. Tang, W. He, B. Jiang, F. Pan, Mater. Sci. Eng. A 849, 143460 (2022)
A. Rouzbeh, M. Sedighi, R. Hashemi, J. Mater. Res. Technol. 23, 5318 (2023)
X. Sun, X. Hao, J. Nie, Y. Fan, Y. Chen, S. Liu, X. Liu, Y. Zhao, J. Mater. Res. Technol. 21, 532 (2022)
D. Rahmatabadi, M. Pahlavani, M.D. Gholami, J. Marzbanrad, R. Hashemi, J. Mater. Res. Technol. 9, 7880 (2020)
H. Chang, M.Y. Zheng, C. Xu, G.D. Fan, H.G. Brokmeier, K. Wu, Mater. Sci. Eng. A 543, 249 (2012)
A. Pukenas, P. Chekhonin, J. Scharnweber, R. Chulist, C.G. Oertel, J. Freudenberger, W. Skrotzki, Mater. Today Commun. 30, 103083 (2022)
Y.H. Xian, W.J. He, W.H. Chen, Z.J. Chen, B. Jiang, Q. Liu, Adv. Eng. Mater. 23, 9 (2021)
K.N. Zhao, D.X. Xu, H.X. Li, J.S. Zhang, D.L. Chen, Mater. Sci. Eng. A 764, 138194 (2019)
H. Wang, C.J. Boehlert, Q.D. Wang, D.D. Yin, W.J. Ding, Int. J. Plast. 84, 255 (2016)
E.L.S. Solomon, A.R. Natarajan, A.M. Roy, V. Sundararaghavan, A. Van der Ven, E.A. Marquis, Acta Mater. 166, 148 (2019)
I.H. Jung, M. Sanjari, J. Kim, S. Yue, Scr. Mater. 102, 1 (2015)
N. Ansari, R. Sarvesha, S.Y. Lee, S.S. Singh, J. Jain, Mater. Sci. Eng. A 793, 139856 (2020)
Z.K. Ji, X.G. Qiao, C.Y. Hu, L. Yuan, F.G. Cong, G.J. Wang, W.C. Xie, M.Y. Zheng, Mater. Sci. Eng. A 849, 143514 (2022)
P.Y. Wang, J.G. Wang, H.L. Jia, C. Wang, J.S. Li, Z.T. Hu, M. Zha, H.Y. Wang, Mater. Sci. Eng. A 819, 141452 (2021)
H. Dong, L. Wang, Y. Wu, L. Wang, J. Alloys Compd. 506, 468 (2010)
K. Wei, L. Xiao, B. Gao, L. Li, Y. Liu, Z. Ding, W. Liu, H. Zhou, Y. Zhao, J. Magnes. Alloys 8, 1221 (2020)
X. Peng, G. Wu, L. Xiao, H. Ji, J. Zhang, W. Zou, Z. Li, W. Liu, Prog. Nat. Sci.: Mater. Int. 29, 103 (2019)
L. Wu, C. Cui, R. Wu, J. Li, H. Zhan, M. Zhang, Mater. Sci. Eng. A 528, 2174 (2011)
C. He, S. Bai, B. Jiang, L. Liu, Q. Wang, M. Yuan, Z. Dong, W. He, G. Huang, D. Zhang, F. Pan, J. Mater. Res. Technol. 20, 343 (2022)
K. Guan, D. Egusa, E. Abe, J. Zhang, X. Qiu, Q. Yang, J. Meng, J. Magnes. Alloys 10, 1220 (2022)
Y. Wang, D. Zhang, S. Zhong, Q. Dai, J. Hua, Y. Luo, G. Hu, J. Xu, B. Jiang, F. Pan, J. Mater. Res. Technol. 20, 3735 (2022)
L. Feng, X. Dong, Q. Cai, B. Wang, S. Ji, J. Alloys Compd. 923, 166364 (2022)
F. Qi, D. Zhang, X. Zhang, F. Pan, Trans. Nonferrous Metals Soc. China 24, 1352 (2014)
X.T. Fang, Z.K. Li, Y.F. Wang, M. Ruiz, X.L. Ma, H.Y. Wang, Y. Zhu, R. Schoell, C. Zheng, D. Kaoumi, Y.T. Zhu, J. Mater. Sci. Technol. 98, 244 (2022)
X. Chen, S. Liu, K. Liu, G. Huang, J. Zhang, A. Tang, B. Jiang, F. Pan, Mater. Lett. 272, 127858 (2020)
Y. Yang, Y. Liu, S. Yan, S. Jiang, Z. He, H. Pan, N. Jia, J. Magnes. Alloys 8, 1515 (2022)
C.S. Han, H. Gao, Y. Huang, W.D. Nix, J. Mech. Phys. Solids 53, 1188 (2005)
L.P. Kubin, A. Mortensen, Scr. Mater. 48, 119 (2003)
X. Ma, C. Huang, J. Moering, M. Ruppert, H.W. Höppel, M. Göken, J. Narayan, Y. Zhu, Acta Mater. 116, 43 (2016)
Acknowledgements
This work was financially supported by the National Natural Science Foundation of China (Projects 52171102, 51971041) and the Fundamental Research Funds for the central universities (No. 2023CDJXY-018).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no conflicts of interest.
Additional information
Available online at http://link.springer.com/journal/40195
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Feng, Y., Chen, W., Xu, Z. et al. Fabrication of AZ31/Mg3Y Composites with Excellent Strength and Plasticity via Accumulated Rolling Bonding and Diffusion Annealing. Acta Metall. Sin. (Engl. Lett.) 37, 339–352 (2024). https://doi.org/10.1007/s40195-023-01634-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-023-01634-4