Avoid common mistakes on your manuscript.
Correction to: Integrating Materials and Manufacturing Innovation (2019) 8:388–399 https://doi.org/10.1007/s40192-019-00147-2
The article “PolyProc: A Modular Processing Pipeline for X-ray Diffraction Tomography” written by Jiwoong Kang, Ning Lu, Issac Loo, Nancy Senabulya, and Ashwin J. Shahani was originally published Online First without Open Access. After publication in volume [8], issue [3], page [388–399], the author decided to opt for Open Choice and to make the article an Open Access publication. Therefore, the copyright of the article has been changed to © The Author(s) [2019] and the article is forthwith distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, duplication, adaptation, distribution, and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kang, J., Lu, N., Loo, I. et al. Correction to: PolyProc: A Modular Processing Pipeline for X-ray Diffraction Tomography. Integr Mater Manuf Innov 9, 151 (2020). https://doi.org/10.1007/s40192-020-00171-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40192-020-00171-7